User manual

74 English
Troubleshooting
Troubleshooting
Oven
Problem Possible cause Action
The oven control
beeps and displays
an information
code.
You have a function
information code. See the
“Information codes” chart
on 80.
Press the OFF/CLEAR button and
restart the oven.
If the problem persists, disconnect
all power to the range for at least
30 seconds and then reconnect the
power. If this does not solve the
problem, call for service.
Very large or
yellow oven
burner ames.
The oven burner air
adjustment shutters need to
be adjusted.
Call for a qualied service technician.
Gas supply is not properly
connected or turned on.
See the Installation Instructions that
came with your range.
Oven temperature
is too hot or cold.
Oven thermostat needs
adjustment.
See 59.
Oven burner will
not shut off.
The oven door lock is
turned on.
The display will show the Lock icon.
Hold the oven door open and press the
START/SET button for 3 seconds. The
oven will beep and the Lock icon will
turn off.
The Sabbath function has
been activated.
SAb and the time of day will show
in the display. All other controls and
signals will be deactivated. To turn off
the oven only, press the OFF/CLEAR
button.
To cancel the Sabbath function and
reactivate the controls and signals,
press and hold the Bake and Touch to
Wake-Up buttons simultaneously for
3 seconds.
NX58J7750SS_DG68-00623A-00_EN.indd 74 2015-01-29  12:23:40