User Manual PE40C PE46C PE55C The color and the appearance may differ depending on the product, and the specifications are subject to change without prior notice to improve the performance.
Table Of Contents BEFORE USING THE PRODUCT PREPARATIONS 13 Copyright 14 Cleaning 14 Storage 15 Safety Precautions 15 16 17 19 Symbols Electricity and Safety Installation Operation 23 Checking the Contents 23 25 Removing the Packaging (for PE40C and PE46C models only) Removing the Packaging (for PE55C models only) Checking the Components 28 Parts 28 30 31 32 35 Control Panel Reverse Side Anti-theft Lock Remote Control Connection Using an IR Stereo Cable 36 Before Installing the Product
Table Of Contents CONNECTING AND USING A SOURCE DEVICE USING MDC 60 Before Connecting 60 Pre-connection Checkpoints 61 Connecting and Using a PC 61 64 Connecting to a PC Changing the Resolution Using a PC 66 Connecting an External Monitor 67 Connecting to a Video Device 67 67 68 68 69 Connection Using the AV Cable Connection Using the Component Cable Connection Using an HDMI-DVI Cable Connection Using an HDMI Cable Connecting to an Audio System 70 Connecting the PC module (sold separately)
Table Of Contents SCREEN ADJUSTMENT 76 What is MDC? 76 78 79 80 81 82 83 84 85 88 91 94 94 105 109 114 Connecting to MDC Connection Management User Login Auto Set ID Cloning Command Retry Getting Started with MDC Main Screen Layout Menus Screen Adjustment Advanced features Sound Adjustment System Setup Tool Settings Other Functions Troubleshooting Guide 116 Picture Mode 116 117 If the input source is PC, DVI or DisplayPort If the input source is AV, Component, HDMI 117 Backlight / Contrast / Brig
Table Of Contents SOUND ADJUSTMENT NETWORK 124 Advanced Settings 125 125 125 125 125 125 126 126 126 126 Dynamic Contrast Black Tone Flesh Tone RGB Only Mode Colo(u)r Space White Balance 10p White Balance (Off / On) Gamma Expert Pattern Motion Lighting (Off / On) 127 Picture Options 128 128 128 128 129 129 129 129 Colo(u)r Tone Colo(u)r Temp.
Table Of Contents SYSTEM 142 Wi-Fi Direct 143 Soft AP 144 AllShare Settings 144 Using the AllShare Play Function 144 Device Name 145 Multi Control 145 Configuring settings for Multi Control 146 Time 146 146 147 147 148 Clock set Sleep Timer On Timer Off Timer Holiday Management 149 Language 149 Rotate menu(Rotate Menu) 149 Eco Solution 149 150 150 150 Energy Saving Eco Sensor (Off / On) No Signal Power Off Auto Power Off (Off / On) 151 Security 151 151 151 Safety Lock (Off / O
Table Of Contents 155 Ticker 156 Video Wall 156 156 157 157 157 Video Wall Format Horizontal Vertical Screen Position 158 Source AutoSwitch Settings 159 General 159 159 160 160 160 160 160 161 161 161 161 Max.
Table Of Contents SUPPORT ALLSHARE PLAY 167 Software Update 167 167 By USB Alternative Software 168 Contact Samsung 168 Contents Home 168 168 169 169 170 MagicInfo Lite MagicInfo Premium S MagicInfo Videowall S AllShare Play Source 171 What is AllShare Play? 171 173 174 175 Read the following before using AllShare Play with a USB device Using a USB device Connecting to a PC over a network Using the AllShare Play features 176 Using the Basic AllShare Play Features 176 177 177 178 Sorting
Table Of Contents MAGICINFO LITE 185 Supported Subtitle and AllShare Play file formats 185 185 186 186 Subtitle Supported image resolutions Supported music file formats Supported Video Formats 188 File Formats Compatible with MagicInfo Lite Player 189 Contents 196 MagicInfo Lite 196 198 199 200 Network Schedule Local schedule Internal AutoPlay USB AutoPlay 201 Local Schedule Manager 201 205 207 208 209 210 212 Registering a Local schedule Modifying a Local schedule Deleting a Local schedule
Table Of Contents MAGICINFO PREMIUM S 216 Settings 216 217 217 217 217 217 217 218 218 218 Server Network Setting Default content duration Content ratio Image Effect Default content Screen layout Schedule Name Safety Remove USB Device(Safety Remove USB) Delete all content Reset Settings 219 When Content is Running 219 220 Viewing the details of the content that is running Changing the settings for the content that is running 221 File Formats Compatible with MagicInfo Premium S Player 225 225 226
Table Of Contents MAGICINFO VIDEOWALL S 249 Template Manager 249 Registering a Template 254 Content Manager 254 255 Copying content Deleting content 256 Settings 256 257 257 257 257 257 257 257 258 258 Server Network Setting Default content duration Content ratio Image Effect Default content Screen layout Schedule Name Safety Remove USB Device(Safely Remove USB) Delete all content Reset Settings 259 When Content is Running 259 260 Viewing the details of the content that is running Changing
Table Of Contents TROUBLESHOOTING GUIDE SPECIFICATIONS APPENDIX 267 Requirements Before Contacting Samsung Customer Service Centre 267 267 268 Testing the Product Checking the Resolution and Frequency Check the followings.
Before Using the Product Copyright The contents of this manual are subject to change without notice to improve quality. © 2013 Samsung Electronics Samsung Electronics owns the copyright for this manual. Use or reproduction of this manual in parts or entirety without the authorization of Samsung Electronics is prohibited. Microsoft and Windows are registered trademarks of Microsoft Corporation. VESA, DPM and DDC are registered trademarks of the Video Electronics Standards Association.
Before Using the Product Cleaning Exercise care when cleaning as the panel and exterior of advanced LCDs are easily scratched. Take the following steps when cleaning. The following images are for reference only. Real-life situations may differ from what is shown in the images. 1. Power off the product and computer. 2. Disconnect the power cord from the product. Hold the power cable by the plug and do not touch the cable with wet hands. Otherwise, an electric shock may result. 3.
Before Using the Product Safety Precautions CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION : TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). THERE ARE NO USER SERVICEABLE PARTS INSIDE. REFER ALL SERVICING TO QUALIFIED PERSONNEL. This symbol indicates that high voltage is present inside. It is dangerous to make any kind of contact with any internal part of this product.
Before Using the Product Electricity and Safety The following images are for reference only. Real-life situations may differ from what is shown in the images. Warning Do not use a damaged power cord or plug, or a loose power socket. An electric shock or fire may result. Do not use multiple products with a single power socket. Overheated power sockets may cause a fire. Do not touch the power plug with wet hands. Otherwise, an electric shock may result.
Before Using the Product Caution Do not disconnect the power cord while the product is being used. The product may become damaged by an electric shock. Only use the power cord provided with your product by Samsung. Do not use the power cord with other products. ! A fire or electric shock may result. Keep the power socket where the power cord is connected unobstructed. The power cord must be disconnected to cut off power to the product when an issue occurs.
Before Using the Product Keep the plastic packaging out of the reach of children. Children may suffocate. ! Do not install the product on an unstable or vibrating surface (insecure shelf, sloped surface, etc.) The product may fall and become damaged and/or cause an injury. Using the product in an area with excess vibration may damage the product or cause a fire. Do not install the product in a vehicle or a place exposed to dust, moisture (water drips, etc.), oil, or smoke.
Before Using the Product Set down the product gently Product failure or personal injury may result. ! SAMSUNG ! Installing the product in an unusual place (a place exposed to a lot of fine particles, chemical substances or extreme temperatures, or an airport or train station where the product should operate continuously for an extended period of time) may seriously affect its performance. Be sure to consult Samsung Customer Service Centre if you want to install the product at such a place.
Before Using the Product During a lightning or thunderstorm, power off the product and remove the power cable. ! A fire or electric shock may result. Do not drop objects on the product or apply impact. A fire or electric shock may result. ! Do not move the product by pulling the power cord or any cable. Product failure, an electric shock or fire may result from a damaged cable. If a gas leakage is found, do not touch the product or power plug. Also, ventilate the area immediately.
Before Using the Product Caution Leaving the screen fixed on a stationary image for an extended period of time may cause afterimage burn-in or defective pixels. ! Activate power-saving mode or a moving-picture screen saver if you will not be using the product for an extended period of time. -_! Disconnect the power cord from the power socket if you do not plan on using the product for an extended period of time (vacation, etc).
Before Using the Product Exercise caution when adjusting the product angle or stand height. ! Your hand or finger may get stuck and injured. Tilting the product at an excessive angle may cause the product to fall and an injury may result. Do not place heavy objects on the product. Product failure or personal injury may result. When using headphones or earphones, do not turn the volume too high. Having the sound too loud may damage your hearing.
1 1.1 Preparations Checking the Contents The appearance of the actual product may differ from the images shown. 1.1.1 Removing the Packaging (for PE40C and PE46C models only) 1 Open the packaging box. Be careful not to damage the product when you open the packaging with a sharp instrument. 2 Remove the styrofoam from the product. 3 Check the product and remove the styrofoam and plastic bag. The appearance of the actual product may differ from the image shown. This image is for reference only.
1 Preparations 1.1.2 Removing the Packaging (for PE55C models only) 1 Remove the black locking device at the bottom of the box. 1 2 2 Using the grooves in the box, lift and remove the top of the box. 3 Check the components and remove the styrofoam and plastic bag. 3 The appearance of actual components may differ from the image shown. This image is for reference only. 4 Store the box in a dry area so that it can be used when moving the product in the future.
1.1.3 Checking the Components Contact the vendor where you purchased the product if any components are missing. The appearance of the components and items sold separately may differ from the image shown. A stand is not provided with the product. To install a stand, you can purchase one separately. Components Components may differ in different locations.
1 Preparations Items sold separately The stand is not supplied. The following items can be purchased at your nearest retailer.
1 Preparations RS232C(IN) Adapter The RS232C adapter can be used to connect to another monitor using the D-SUB (9-pin) type RS232C cable. Ensure you connect each of the adapters to the correct RS232C IN or OUT port on the product.
1 1.2 Preparations Parts 1.2.1 Control Panel Panel Key POWER Remote sensor Speaker Panel Key Buttons Description Power on the product. If you press the [ ] button when the product is turned on, the control menu will be displayed. To exit the OSD menu, press and hold the panel key for at least one second. Move to the upper or lower menu. You can also adjust the value of an option. Move to the left or right menu.
1 Preparations Control menu If you press the [ ] button on the panel key ("1.2.1 Control Panel") when the product is turned on, the control menu will be displayed. CONTENT Return Icons Description Select the connected input source. Move the panel key right to select Source [ ] in the control menu. When the list of input sources is displayed, move the panel key up or down to select the desired input source. Next, press the panel key. Display the OSD menu.
1 Preparations 1.2.2 Reverse Side The colour and shape of parts may differ from what is shown. Specifications are subject to change without notice to improve quality. RS232C IN RS232C OUT IR / AMBIENT SENSOR IN AUDIO OUT RGB / DVI / HDMI / AV / COMPONENT AUDIO IN USB USB POWER DP IN HDMI IN DVI IN DP OUT RGB IN Port IR COMPONENT IN OUT RJ45 Description [RS232C IN] Connects to MDC using an RS232C-stereo cable.
1 Preparations Port Description [IR OUT] Receives the remote control signal via the external sensor board and outputs the signal via LOOPOUT. [RJ45] Connects to MDC using a LAN cable. Assembling the Holder-Wire stand 1.2.3 Anti-theft Lock An anti-theft lock allows you to use the product securely even in public places. The locking device shape and locking method depend on the manufacturer. Refer to the user guide provided with your anti-theft locking device for details.
1 Preparations 1.2.4 Remote Control Using other display devices in the same space as the remote control of this product can cause the other display devices to be inadvertently controlled. Remote control button functions may differ for different products. Power on the product. Power off the product. Enter the password in the OSD menu. Not available. Mute the sound. Unmuting the sound: Press MUTE again or press the volume control (+ VOL -) button.
1 Preparations Adjusting the OSD with the Remote Control 1. Open the OSD menu. 2. Select from Picture, Sound, Network, System or Support in the displayed OSD menu screen. 3. Change settings as desired. 4. Finish setting. 5. Close the onscreen display (OSD) menu.
Remote Control Reception Range 7m ~ 10m 1 Preparations Use the remote control within 7m to 10m from the sensor on the product at an angle of 30˚ from the left and right. Store used batteries out of reach of children and recycle. Do not use a new and used battery together. Replace both batteries at the same time. Remove batteries when the remote control is not to be used for an extended period of time.
1 Preparations 1.2.5 Connection Using an IR Stereo Cable Turn off the device before connecting the External Sensor Kit. After it is connected, turn on the device. Controlling more than one display product using your remote control 1 2 IR OUT IR/ AMBIENT SENSOR IN Connect the [IR OUT] port on the product to the [IR / AMBIENT SENSOR IN] port on the other display product using the dedicated stereo cable.
1 1.3 Preparations Before Installing the Product (Installation Guide) To prevent injury, this apparatus must be securely attached to the floor/wall in accordance with the installation instructions. Ensure that an authorized installation company installs the wall mount. Otherwise, it may fall and cause personal injury. Make sure to install the specified wall mount. 1.3.1 Tilting Angle and Rotation Contact Samsung Customer Service Centre for further details.
1 Preparations 1.3.2 Ventilation 1. Installation on a Perpendicular Wall A Minimum 40 mm B Ambient temperature: Under 35 C When installing the product on a perpendicular wall, allow at least 40 mm of space between the product and wall surface for ventilation and ensure that the ambient A temperature is kept below 35 C. B Figure 1.1 Side view 2. Installation on an Indented Wall Contact Samsung Customer Service Centre for further details. Figure 1.
1 1.4 Preparations Dimensions 5 1 2 4 3 Unit: mm (inches) Model name 1 2 3 4 5 PE40C 919.6 (36.2) 885.6 (34.9) 498.2 (19.6) 532.0 (20.9) 35.1 (1.38) PE46C 1054.5 (41.52) 1018.1 (40.1) 572.7 (22.5) 608.5 (24.0) 35.1 (1.38) PE55C 1249.5 (49.19) 1209.6 (47.6) 680.4 (26.8) 721.0 (28.4) 35.1 (1.38) All drawings are not necessarily to scale. Some dimensions are subject to change without prior notice. Refer to the dimensions prior to performing installation of your product.
1 1.5 Preparations Installing the Wall Mount 1.5.1 Preparing before installing Wall-Mount To install a wall-mount from another manufacturer, use the Holder-Ring. 1 1.5.2 Installing the Wall Mount Kit The wall mount kit (sold separately) allows you to mount the product on the wall. For detailed information on installing the wall mount, see the instructions provided with the wall mount. We recommend you contact a technician for assistance when installing the wall mount bracket.
1 Preparations Standard dimensions for wall mount kits are shown in the table below. Samsung wall mount kits contain a detailed installation manual and all parts necessary for assembly are provided. Do not use screws that do not comply with the VESA standard screw specifications. Do not use screws that are longer than the standard length or do not comply with the VESA standard screw specifications. Screws that are too long may cause damage to the inside of the product.
1 1.6 Preparations Remote Control 1.6.1 Cable Connection RS232C Cable Interface RS232C (9 pins) Pin TxD (No. 2), RxD (No. 3), GND (No.
1 Preparations RS232C cable Connector: 9-Pin D-Sub to Stereo Cable 9 6 3 2 1 5 -P1- 1 -P2- -P1Female -P1- -P2- -P2- Rx 2 --------> 1 Tx Tx 3 <-------- 2 Rx Gnd 5 --------- 3 Gnd STEREO PLUG (3.5ø) LAN Cable Pin assignment 1 2 3 4 5 6 7 8 Pin No.
1 Preparations Connector: RJ45 Direct LAN cable (PC to HUB) HUB P2 RJ45 MDC P1 P1 P2 Signal P1 TX+ 1 TX- RJ45 MDC P2 Signal <--------> 1 TX+ 2 <--------> 2 TX- RX+ 3 <--------> 3 RX+ RX- 6 <--------> 6 RX- Cross LAN cable (PC to PC) RJ45 MDC P1 P2 Signal P1 P2 Signal TX+ 1 <--------> 3 RX+ TX- 2 <--------> 6 RX- RX+ 3 <--------> 1 TX+ RX- 6 <--------> 2 TX- 1 Preparations 43
1 Preparations 1.6.
1 Preparations Connection 3 RJ45 RS232C OUT RS232C IN RS232C OUT IN RS232C OUT IN OUT 1 Preparations 45
1 Preparations 1.6.3 Control Codes Viewing control state (Get control command) Header Command 0xAA Command type Data length ID 0 Checksum Data length Data 1 Value Controlling (Set control command) Header Command 0xAA Command type ID Checksum Command No.
1 Preparations E.g. Power On & ID=0 Header Command Data length Data 1 1 "Power" Data length Data 1 1 1 ID 0xAA 0x11 Header Command Checksum ID 0xAA 12 0x11 To control all devices connected by a serial cable simultaneously irrespective of IDs, set the ID as "0xFE" and transmit commands. Commands will be executed by each device but ACK will not respond. Power control Function A product can be powered on and off using a PC.
1 Preparations Volume control Function The volume of a product can be adjusted using a PC.
1 Preparations Input source control Function The input source of a product can be changed using a PC.
1 Preparations Ack Header Command 0xAA 0xFF Data length Ack/Nak r-CMD Val1 3 ‘A’ 0x14 "Input Source" ID Checksum "Input Source": An input source code to be set on a product Nak Header Command Data length Ack/Nak r-CMD Val1 3 ‘N’ 0x14 "ERR" ID 0xAA Checksum 0xFF "ERR": A code showing what error has occurred Screen mode control Function The screen mode of a product can be changed using a PC. Screen mode cannot be controlled when the Video Wall function is enabled.
1 Preparations Ack Header Command 0xAA 0xFF Data length Ack/Nak r-CMD Val1 3 ‘A’ 0x18 "Screen Mode" Data length Ack/Nak r-CMD Val1 3 ‘N’ 0x18 "ERR" ID Checksum "Screen Mode": A code that sets the product status Nak Header Command ID 0xAA Checksum 0xFF "ERR": A code showing what error has occurred Screen size control Function The screen size of a product can be changed using a PC.
1 Preparations PIP On/Off control Function The PIP mode of a product can be turned on or off using a PC. Only available on models that have the PIP function. The mode cannot be controlled if Video Wall is set to On. This function is not available in MagicInfo.
1 Preparations Auto adjustment control (PC and BNC only) Function Automatically adjust the PC system screen using a PC.
1 Preparations Video Wall Mode Control Function Video Wall mode can be activated on a product using a PC. This control is only available on a product whose Video Wall is enabled. This function is not available in MagicInfo.
1 Preparations Safety Lock Function PC can be used to turn the Safety Lock function on or off on a product. This control is available regardless of whether or not the power is turned on.
1 Preparations Video Wall On Function Turn Video Wall on or off on the product from your computer. Get Video Wall On/Off Status Header Command Data length ID 0xAA Checksum 0x84 0 Set Video Wall On/Off Header Command Data length Data 1 V.Wall_On ID 0xAA Checksum 0x84 V.Wall_On: Video Wall code to be assigned to the product 1: Video Wall ON 0: Video Wall OFF Ack Header Command 0xAA 0xFF Data length Ack/Nak r-CMD 3 ‘A’ 0x84 ID Val1 V.Wall_ Checksum On V.
1 Preparations Video Wall User Control Function Turn Video Wall on or off on the product from your computer.
1 Preparations 10x10 Video Wall Model 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 1 0x11 0x12 0x13 0x14 0x15 0x16 0x17 0x18 0x19 0x1A 0x1B 0x1C 0x1D 0x1E 0x1F 2 0x21 0x22 0x23 0x24 0x25 0x26 0x27 0x28 0x29 0x2A 0x2B 0x2C 0x2D 0x2E 0x2F 3 0x31 0x32 0x33 0x34 0x35 0x36 0x37 0x38 0x39 0x3A 0x3B 0x3C 0x3D 0x3E 0x3F 4 0x41 0x42 0x43 0x44 0x45 0x46 0x47 0x48 0
1 Preparations Ack Header Command ID 0xAA 0xFF Data length Ack/ Nak r-CMD 4 ‘A’ 0x89 Val1 Val2 Checksum Wall_Div Wall_SNo V.
2 2.1 Connecting and Using a Source Device Before Connecting Check the following before you connect this product with other devices. Devices that can be connected to this product include PCs, camcorders, speakers, set top boxes and DVD/Blu-ray Disc players. 2.1.1 Pre-connection Checkpoints Before connecting a source device, read the user manual provided with it. The number and locations of ports on source devices may differ from device to device.
2 2.2 Connecting and Using a Source Device Connecting and Using a PC 2.2.1 Connecting to a PC Do not connect the power cable before connecting all other cables. Ensure you connect a source device first before connecting the power cable. A PC can be connected to the product in a variety of ways. Select a connection method suitable for your PC. Connecting parts may differ in different products.
2 Connecting and Using a Source Device Connection Using an HDMI-DVI Cable HDMI IN RGB / DVI / HDMI / AV / COMPONENT AUDIO IN When you connect a PC to the product using an HDMI-DVI cable, set Edit Name to DVI PC to access video and audio content stored on the PC.
2 Connecting and Using a Source Device Connection Using an DP Cable DP IN Precautions for using DP To increase the standby power capacity, the product stops DP communication when it is turned off or in power-saving mode. If the product in dual monitor mode is turned off or goes into power-saving mode, monitor setting changes may not be updated. As a result, screen output may not be displayed properly. In the occurrence of this issue, set Max Power Saving to Off before using the product.
2 Connecting and Using a Source Device 2.2.2 Changing the Resolution Using a PC Adjust the resolution and refresh rate in Control Panel on your PC to obtain optimum picture quality. The picture quality of TFT-LCDs may degrade if the optimum resolution is not selected. Changing the Resolution on Windows XP Go to Control Panel Display Settings and change the resolution. Changing the Resolution on Windows Vista Go to Control Panel Personalization Display Settings and change the resolution.
2 Connecting and Using a Source Device Changing the Resolution on Windows 7 Go to Control Panel Display Screen Resolution and change the resolution. 4 Changing the Resolution on Windows 8 Go to Settings 4 Control Panel Display Screen Resolution and change the resolution.
2 2.3 Connecting and Using a Source Device Connecting an External Monitor DP OUT DP IN The following images are for reference only. Real-life situations may differ from what is shown in the images.
2 2.4 Connecting and Using a Source Device Connecting to a Video Device Do not connect the power cable before connecting all other cables. Ensure you connect a source device first before connecting the power cable. You can connect a video device to the product using a cable. Connecting parts may differ in different products. After connecting a source device, press the SOURCE button on the remote control and select the connected source device. 2.4.
2 Connecting and Using a Source Device 2.4.3 Connection Using an HDMI-DVI Cable HDMI IN RGB / DVI / HDMI / AV / COMPONENT AUDIO IN Audio will not be enabled if the product is connected to a video device using an HDMI-DVI cable. To resolve this, additionally connect an audio cable to the audio ports on the product and video device. When you connect a video device to the product using an HDMI-DVI cable, set Edit Name to DVI Device to access video and audio content stored on the video device.
2 Connecting and Using a Source Device Using an HDMI cable or HDMI to DVI Cable (up to 1080p) For better picture and audio quality, connect to a digital device using an HDMI cable. An HDMI cable supports digital video and audio signals, and does not require an audio cable. To connect the product to a digital device that does not support HDMI output, use an HDMI/ DVI and audio cables.
2 2.5 Connecting and Using a Source Device Connecting the PC module (sold separately) 2.5.1 MagicInfo To use MagicInfo, a PC module must be connected to the product. For details on how to connect a PC module, refer to the PC module user manual. To change the MagicInfo settings, run "MagicinfoSetupWizard" on the desktop. For details on how to use MagicInfo, refer to the DVD provided with the PC module. The information in this section is subject to change without notice for quality improvement.
2 Connecting and Using a Source Device 4 Enter the IP information. MagicInfo Setup Wizard - v.1.12 Select TCP/IP - step 2 Obtain an IP address automatically Use the following IP address: IP address: 192 . 168 . 0 . 102 Subnet mask: 255 . 255 . 255 . 0 Default gateway: 192 . 168 . 0 . 1 Obtain DNS server address automatically Use the following DNS server address: Preferred DNS server: 10 . 44 . 33 . 22 Alternate DNS server: 10 . 33 . 22 .
2 Connecting and Using a Source Device 6 Select a display mode. MagicInfo Setup Wizard - v.1.12 Select Screen Type - step 4 Landscape Portrait < Back(B) 7 Next(N) > Finish Cancel Double-check the settings you have just configured. MagicInfo Setup Wizard - v.1.12 Setup Information 1. Application : MagicInfo Pro [LAN,WAN based version\ 2. Internet Protocol [TCP/IP] IP : 192.168.0.102 3. Language : 4.
2 2.6 Connecting and Using a Source Device Changing the Input source 2.6.1 Source MENU [m] Support Contents Home ENTER [ Source ] Source allows you to select a variety of sources and change source device names. Source You can display the screen of a source device connected to the product. Select a source from Source List to display the screen of the selected source.
3 Using MDC MDC (Multiple Display Control) is an application that allows you to easily control multiple display devices simultaneously using a PC. 3.1 Configuring Settings for Multi Control MENU [m] System Multi Control ENTER [ ] Assign an individual ID to your product. 3.1.1 Configuring settings for Multi Control ID Setup Assign an ID to a set. (Range: 0~99) Press or to select a number, and press [ ].
3 3.2 Using MDC MDC Programme Installation/Uninstallation 3.2.1 Installation 1 2 Insert the installation CD into the CD-ROM drive. Click the MDC Unified installation programme. If a software installation window is not displayed on the main screen, install with the MDC Unified execution file in the MDC folder on the CD. 3 4 5 Select a language for installation. Next, click "OK". When the "Welcome to the InstallShield Wizard for MDC_Unified" screen appears, click "Next".
3 3.3 Using MDC What is MDC? Multiple display control "MDC" is an application that allows you to easily control multiple display devices simultaneously using a PC. 3.3.1 Connecting to MDC Using MDC via RS-232C (serial data communications standards) An RS-232C serial cable must be connected to the serial ports on the PC and monitor.
3 Using MDC Using MDC via Ethernet Enter the IP for the primary display device and connect the device to the PC. One display device can connect to another using an RS-232C serial cable. Connection using a direct LAN cable RJ45 Multiple products can be connected using the [RJ45] port on the product and the LAN ports on the HUB. Connection using a cross LAN cable RS232C OUT RJ45 Multiple products can be connected using the [RS232C IN / OUT] port on the product.
3 Using MDC 3.3.2 Connection Management Connection management includes the Connection list and Connection list modification options. Connection list - Connection list shows the details of the connections such as connection setting (IP/ COM, Port No, MAC, and Connection Type), connection status, Set ID Range, and detected devices. Each connection can contain a maximum of 100 devices connected in serial daisy-chain fashion.
3 Using MDC 3.3.3 User Login Launching the programme displays the user login window. The initial login ID (User Login: "admin") and password (password: "admin") are set to"admin". After logging in for the first time, make sure to change the password to ensure security. To change the password, go to Home > User Settings. After you are logged in, [User Login: "admin"] appears at the right bottom of the programme.
3 Using MDC 3.3.4 Auto Set ID Auto Set ID feature assigns a Set ID for all the LFDs connected in daisy-chain of a selected connection. There can be a maximum of 100 LFDs in a connection. The Set ID is assigned sequentially in the daisychain running from 1 to 99, and then finally to Set ID 0. ID for the last 100th LFD is set to 0.
3 Using MDC 3.3.5 Cloning Using the Cloning feature, you can copy the setting of one LFD and apply it to multiple selected LFDs. You can select specific tab categories or all tab categories for cloning, using the copy setting option window. To delete the settings you have configured, click the Paste Settings button.
3 Using MDC 3.3.6 Command Retry This feature is used to specify the maximum number of times the MDC command will be retried in case of there being no reply or a corrupted reply from an LFD. The retry count value can be set using the MDC options window. The retry count value must be between 1-10. The default value is 1.
3 Using MDC 3.3.7 Getting Started with MDC 1 To start the programmes, click Start Programmes Samsung MDC Unified. The login window appears after the MDC programme is launched. Enter the user ID and password. 2 The default user ID and password are "admin". Make sure to change the password after the first login. Click Add to add a display device. SET ID Range: Select a range of the unique ID assigned to a monitor.
3 Using MDC 3.3.8 Main Screen Layout 1 6 5 4 2 3 1 Menu Bar Change the status of a display device or the properties of the programme. 2 Device Category View a list of connected display devices or device groups. 3 Schedule Category View a list of schedules for display devices. 4 Set List Select the display device you want to adjust. 5 Modify the Set List Add, edit, regroup or delete sets. 6 Help Topics Display help topics for the programme.
3 Using MDC 3.3.9 Menus You can power on or off a selected device or change the input source or volume of the device. Choose display devices from the list of sets, and select the Home tab. 1 Home Select an item and change the corresponding setting. Power On: Power on a selected display. Off: Power off a selected display. Input Input Source : Change the input source. Input sources available can vary depending on the Display Device Models.
3 Using MDC 2 Volume The volume can be changed or the sound can be muted only for displays that are turned on. Volume The volume can be adjusted using the slider bar in the range of 0 to 100. Adjust the volume of a selected display. Mute Enable or disable Mute for a selected display. Mute will automatically be disabled if Volume is adjusted when Mute is on.
3 Using MDC 4 User Login User Settings Add, delete or edit login information. Logout Log out from the current user account as follows. Click Logout. The message "Do you want to log admin out?" is displayed. Click Yes. The user login window appears. If you do not want to log in, click Close. The programme is closed. If you close the programme using Logout, the login window will appear prompting you to enter user information even if the Auto Login checkbox is selected.
3 Using MDC 3.3.10 Screen Adjustment Custom The screen settings (contrast, brightness, etc.) can be adjusted. Choose display devices from the list of sets, and select the Picture tab. Select an item and change the corresponding screen setting. Picture Mode Adjust the picture mode for the selected display device. Contrast Adjust the contrast for the selected display device. Brightness Adjust the brightness for the selected display device.
3 Using MDC Colo(u)r Tone Adjust the background colour tone for the selected display device. Colo(u)r Temp Adjust the colour temperature for the selected display device. This option is enabled if Colo(u)r Tone is set to Off. HDMI Black Level Adjust the HDMI Black Level for the selected display device. Options Auto Motion Plus This option is used to view dynamic images. Off: Disable the Auto Motion Plus function. Clear: Set the level of Auto Motion Plus to clear.
3 Using MDC MPEG Noise Filter Reduces MPEG noise to provide improved picture quality. Off / Low / Medium / High / Auto Smart LED Controls the LED backlight to maximize picture clarity. Cinema Black In Movie mode, this feature dims the top and bottom areas of the video image to provide a more immersive viewing experience. Off : Turns off the Cinema Black feature. On : Adjusts the dimming of the top and bottom areas of the screen according to the video.
3 Using MDC To automatically adjust the frequency, fine-tune or relocate the screen, click Auto Adjustment. 3.3.11 Advanced features 3D Control 3D Mode Select the 3D input format. 3D L/R Change Swap the left and right pictures. 3D 2D Displays the image for the left eye only. 3D Auto View If you set 3D Auto View to Message Notice, a pop up message window appears when the product receives a 3D signal. 3D Optimization The overall adjustment of 3D effect.
3 Using MDC 3D Expert Pattern View a 3D pattern. 3D Effect Adjust 3D effects like perspective and depth for your preferred 3D viewing experience. Auto: Automatically adjust the perspective and depth settings in accordance with the 3D input source. Manual: Manually adjust the perspective and depth settings. Advanced Settings Dynamic Contrast Adjust the screen contrast. Gamma Control Adjust the primary colour intensity.
3 Using MDC Colo(u)r Space Adjusts the range and variety of colour (the colour space) available to create images. Auto / Native / Custom To adjust Colo(u)r ,Red ,Green ,Blue and Reset, set Colo(u)r Space to Custom. White Balance Adjust the colour temperature for a more natural picture. R-Offset / G-Offset / B-Offset Adjust each colour (red, green, blue) darkness. R-Gain / G-Gain / B-Gain Adjust each colour (red, green, blue) brightness.
3 Using MDC 3.3.12 Sound Adjustment You can change the sound settings. Choose display devices from the list of sets, and select the Sound tab. The Bass or Treble item will be disabled if the item is not supported by the selected set. Bass Adjust the bass for the selected display. Treble Adjust the treble for the selected display. Balance(L/R) Adjust the volume of the left and right speakers of the selected display device.
3 Using MDC Format Select the format to display the split screen. Full Natural H Select the number of horizontal display devices. A maximum of 15 displays can be arranged in a row. A maximum of 6 can be assigned to V if 15 is assigned to H. V Select the number of vertical display devices. A maximum of 15 displays can be arranged in a row. A maximum of 6 can be assigned to V if 15 is assigned to H.
3 Using MDC PIP Basic information required to adjust PIP will appear in the menu screen. PIP will be disabled when Video Wall is ON. Note that Picture Size is disabled when PIP is ON. PIP Size View the PIP Size of the current display. PIP Source Select a PIP input source. Sound Select Select and enable the sound from either the primary screen or secondary screen. Channel The channel can be changed if PIP Source is TV.
3 Using MDC General User Auto Colo(u)r Automatically adjust the screen colours. Available only in PC mode. Auto Power Set the product to automatically power on. Standby Control Set the standby mode to activate if an input source is not detected. Fan & Temperature Configure the settings required to detect the fan speed and internal temperature for the product's protection. Fan Control Select a method to configure the fan speed. Fan Speed Configure the fan speed.
3 Using MDC Security Safety Lock Lock the on-screen menus. To unlock the menus, set Safety Lock to Off. Button Lock Lock the buttons on the display device. To unlock the buttons, set Button Lock to Off. OSD Display Source OSD Select whether to display a message when the Source is changed. Not Optimum Mode OSD Select whether to display a message when a non-compatible mode is selected. No Signal OSD Select whether to display a message when there is no input signal.
3 Using MDC Time Clock Set Change the current time on the selected display device according to the time set on a PC. If the time is not set on the display device, null values will be displayed. Timer On Timer Repeat: Specify the period for which you want to repeat the selected Timer. Once, EveryDay, Mon~Fri, Mon~Sat, Sat~Sun, Manual Holiday Apply: The Holiday Management settings can be applied to the Timer. On Time: Set the time to power on the selected display device.
3 Using MDC Off Timer Repeat: Specify the period for which you want to repeat the selected Timer. Once, EveryDay, Mon~Fri, Mon~Sat, Sat~Sun, Manual Holiday Apply: The Holiday Management settings can be applied to the Timer. Off Time: Set the time to power on the selected display device. The checkboxes to select days of the week below Repeat are enabled only if Manual is selected.
3 Using MDC Screen Burn Protection Pixel Shift Move the screen slightly at specified time intervals to prevent screen burn-in.
3 Using MDC Screen Saver Period (Hour) and Time (Sec) can be configured when Repeat is selected. Start Time and End Time can be configured when Interval is selected. This function prevents screen burn-in when the screen of the selected display device is left idle for an extended period of time. Time: You can set the timer for Screen Saver. Off Repeat: Display the image retention-preventive pattern set in Mode at specified time intervals (Period).
3 Using MDC Safety Screen The Safety Screen function can be used to prevent screen burn-in when a stationary image displays on the screen of a display device for an extended period of time. Lamp Control Lamp Control is used to adjust the backlight to reduce power consumption. Automatically adjust the backlight of the selected display device at a specified time. If Manual Lamp Control is adjusted, Auto Lamp Control will automatically switch to Off. Manually adjust the backlight for the selected display.
3 Using MDC Ticker Input text while a video or image is displayed and display the text on the screen. Ticker Enable or disable Ticker. Off / On Message Enter a message to display on the screen. Timer Set the Start Time and End Time to display a message (Message). Position Select an orientation to display a message (Message) from Horizontal and Vertical. Motion Specify the Direction and Speed to display a message (Message).
3 Using MDC 3.3.14 Tool Settings 1 Security Panel Control Turn on or off the screen of a display device. Remote Control Enable or disable the remote control. 2 Reset Reset Picture Reset the screen settings. Reset Sound Reset the sound settings. Reset System Reset the system settings. Reset All Reset the screen, sound and system settings at the same time. (Language, Security, Multi Control, Multi Control and Anynet+ will not be initialized.
3 Using MDC 3 Edit Column Options Configure the settings for the items that will be displayed on the list of displays. Language: Select a language to use in the MDC programme. After selecting a language, restart the MDC programme to use the selected language. Command Retry Count: Specify the number of retry attempts when a command fails. Error Status Interval: Specify the time interval to query the display device in order to check if "Fault Device" has occurred.
3 Using MDC Monitor Window A window appears showing details for data transfer between the computer and display devices.
3 Using MDC 4 Information View the programme information.
3 Using MDC 3.3.15 Other Functions Resizing a Window Place the mouse pointer on a corner of the programme window. An arrow will appear. Move the arrow to customize the size of the programme window.
3 Using MDC Group Management Creating Groups Create groups and manage the list of sets on a group basis. Duplicate group names cannot be used. 1 Right-click and select Group Edit in the display device list section on the left side of the programme window. 2 In the Edit Group window displayed, click Add on the same level or Add on the sub level. Add on the same level: Create a group on the same level as the selected group.
3 Using MDC 3 Add on the sub level: Create a sub-group under the selected group. Enter the group name. Deleting Groups 1 2 Select a group name, and click Edit. 3 Click Yes. The group will be deleted. In the Edit Group window displayed, click Delete. Renaming Groups 1 2 Select a group name, and click Edit. In the Edit Group window displayed, click Rename. Rename 3 If a cursor appears in the old group name, enter a new group name.
3 Using MDC Schedule Management Creating Schedules Create and register a schedule on a group basis. 1 Click All Schedule List in the schedule section on the left side of the programme window. The Add button will be enabled in the middle. 2 Click the Add button. The Add Schedule window will appear.
3 Using MDC 3 Click Add below the Device Group item, and select the group you want to add a schedule to. 4 Select Date&Time/Action and click OK. The schedule will be added and a list of schedules will appear in the set list window. Device Group: Select a group. Date&Time Instant Execution: Run the schedule immediately. Timer: Set the date, time and interval to run the schedule. Action: Select a function that will activate at the specified time and interval.
3 Using MDC 3.3.16 Troubleshooting Guide Issue The display you want to control does not appear on the system information chart. Solution 1. Check the connection of the RS232C cable (check that the cable is properly connected to appropriate serial port). 2. Check that another display with a duplicate ID is not connected. Connecting displays with a duplicate ID can cause the displays not to be shown due to data collision. 3. Check that the display ID is within the range of 0 and 99.
3 Using MDC How display properties are shown when multiple displays are used 1 2 3 When no display is selected: The default value is displayed. When one display is selected: Settings for the selected display are displayed. When two displays are selected (e.g. in sequence of ID 1 and ID 3): The settings for ID 1 are displayed before the settings for ID 3. 4 When the All+Select checkbox is checked and all displays are selected: The default settings are displayed.
4 Screen Adjustment Configure the Picture settings (Brightness, Colo(u)r Tone, etc.). The layout of the Picture menu options may vary depending on the product. 4.1 Picture Mode MENU [m] Picture Picture Mode ENTER [ ] Select a picture mode (Picture Mode) suitable for the environment where the product will be used. Different Picture Mode options are displayed depending on the current input source.
4 Screen Adjustment 4.1.2 If the input source is AV, Component, HDMI 4.2 Dynamic: This mode is suitable when the ambient light is bright. Standard: This mode is generally suitable for any environment. Natural: Suitable for reducing eye strain. Movie: This mode reduces eye fatigue. Backlight / Contrast / Brightness / Sharpness / Colo(u)r / Tint (G/R) MENU [m] Picture ENTER [ ] Your product has several options for adjusting picture quality.
4 Screen Adjustment Input source Picture Mode Adjustable options PC, DVI, DisplayPort, HDMI (when a PC is connected) Information Backlight / Contrast / Brightness / Sharpness Advertisement Backlight / Contrast / Brightness / Sharpness / Colo(u)r Calibration Backlight AV, Component, HDMI Dynamic, Standard, Natural, Movie Backlight / Contrast / Brightness / Sharpness / Colo(u)r / Tint (G/R) When you make changes to Backlight, Contrast, Brightness, Sharpness, Colo(u)r or Tint (G/R), the OSD w
4 4.3 Screen Adjustment Screen Adjustment MENU [m] Picture Screen Adjustment ENTER [ ] Screen Adjustment provides various picture size and aspect ratio options. Select an option using the and arrow keys, and the press [ press [ ]. Use the arrow keys to select an option in the sub-menu, and then ]. Different Screen Adjustment options are displayed depending on the current input source. The displayed image may differ depending on the model. 4.3.
4 Screen Adjustment 4:3: Sets the picture to basic (4:3) mode. Do not set your product to 4:3 format for a long time. The borders displayed on the left and right, or top and bottom of the screen may cause image retention (screen burn) which is not covered by the warranty. Screen Fit: Displays the full image without any cut-off when HDMI (720p / 1080i / 1080p) or Component (1080i / 1080p) signals are inputted. Custom: Changes the resolution to suit the user's preferences.
4 Screen Adjustment 1 2 3 4 5 6 Press the button to select Zoom/Position. Select the Zoom or Position. Press the [ Press the Press the [ ] button. / / / button to move the picture. ] button. Select Close by pressing the and buttons sequentially. If you want to reset the picture to its original position, select Reset in the Zoom/Position screen. The picture will be set to its default position. 4.3.3 4:3 Screen Size Available only when picture size is set to Auto Wide.
4 4.4 Screen Adjustment Auto Adjustment MENU [m] Picture Auto Adjustment ENTER [ ] Picture Auto Adjustment The displayed image may differ depending on the model. Adjust frequency values/positions and fine tune the settings automatically. This option is available when the input source is PC. 4.5 Rotation MENU [m] Picture Rotation ENTER [ ] Picture Rotation Landscape · Aspect Ratio Full Screen The displayed image may differ depending on the model.
4 4.6 Screen Adjustment Aspect Ratio MENU [m] Picture Aspect Ratio ENTER [ ] Picture Rotation Landscape · Aspect Ratio Full Screen The displayed image may differ depending on the model. Set the rotated screen to be either full screen or original. Full Screen: Display the rotated screen in full screen. Original: Display the rotated screen in the original aspect ratio. Available only when Rotation is set to Portrait.
4 4.7 Screen Adjustment Advanced Settings MENU [m] Picture Advanced Settings ENTER [ ] To use, select an option using the up and down arrow keys, and then press [ change the value or setting, and then press [ ]. Use the arrow keys to ]. Advanced Settings Dynamic Contrast Off Black Tone Off Flesh Tone 0 RGB Only Mode Colour Space Off Native White Balance 10p White Balance Off The displayed image may differ depending on the model.
4 Screen Adjustment Input Source Component, HDMI 4.7.1 Picture Mode Advanced Settings Standard Dynamic Contrast / Black Tone / Flesh Tone / RGB Only Mode / Colo(u)r Space / White Balance / Gamma / Expert Pattern / Motion Lighting Movie Dynamic Contrast / Black Tone / Flesh Tone / RGB Only Mode / Colo(u)r Space / White Balance / 10p White Balance / Gamma / Expert Pattern Dynamic Contrast Adjust the screen contrast. Off / Low / Medium / High 4.7.
4 Screen Adjustment Reset: Resets the White Balance to its default settings. 4.7.7 10p White Balance (Off / On) Controls the white balance in 10 point interval by adjusting the red, green, and blue brightness. Interval: Select interval to adjust. Red: Adjust the red level. Green: Adjust the green level. Blue: Adjust the blue level. Reset: Resets the 10p White Balance to its default settings.
4 4.8 Screen Adjustment Picture Options MENU [m] Picture Select an option using the setting, and then press [ Picture Options and ENTER [ arrow keys, and the press [ ] ]. Use the arrow keys to change the ]. Picture Options Colour Tone Off Colour Temp. 10000K Digital Noise Filter Off MPEG Noise Filter Off HDMI Black Level Normal Flim Mode Off Calibrated value Don’t apply The displayed image may differ depending on the model.
4 Screen Adjustment Input source DisplayPort Picture Mode Picture Options Information Colo(u)r Tone / Colo(u)r Temp / Dynamic Backlight Advertisement Colo(u)r Tone / Colo(u)r Temp / Digital Noise Filter / MPEG Noise Filter / Dynamic Backlight Calibration Dynamic Backlight HDMI Dynamic, Natural, Movie, Standard Colo(u)r Tone / Colo(u)r Temp / Digital Noise Filter / MPEG Noise Filter / HDMI Black Level / Dynamic Backlight AV, Component, HDMI(1080i) Dynamic, Natural, Movie, Standard Colo(u)r To
4 Screen Adjustment Off / Low / Medium / High / Auto 4.8.5 HDMI Black Level Selects the black level on the screen to adjust the screen depth. Normal / Low Available only in HDMI and DVI mode (AV Timing : 480p, 576p, 720p, 1080i, 1080p). 4.8.6 Film Mode Sets the product to automatically sense and process film signals from all sources and adjust the picture for optimum quality. Off / Auto1 / Auto2 Available in AV, COMPONENT(480i / 1080i) or HDMI(1080i). 4.8.
4 4.9 Screen Adjustment Reset Picture MENU [m] Picture Reset Picture ENTER [ ] Resets your current picture mode to its default settings. Picture Reset Picture The displayed image may differ depending on the model.
5 5.1 Sound Adjustment Configure the sound (Sound) settings for the product. Sound Mode MENU[m] Sound Sound Mode ENTER [ ] Use the up and down arrow keys to select an option, and then press [ ]. Sound Sound Mode Standard Sound Effect Speaker Settings Reset Sound The displayed image may differ depending on the model. Standard: Selects the normal sound mode. Music: Emphasizes music over voices. Movie: Provides the best sound for movies.
5 5.2 Sound Adjustment Sound Effect MENU [m] Sound Sound Effect ENTER [ ] If Speaker Select is set to External, Sound Effect is disabled. Available only when Sound Mode is set to Standard. Virtual Surround (Off / On) This function provides a virtual 5.1 channel surround sound experience through a pair of speakers using HRTF(Head Related Transfer Function) technology.
5 Sound Adjustment Auto Volume (Off / Normal / Night) Normal equalizes the volume level on each channel, so that when you change channels, the volume level is the same. Night equalizes and decrease the volume level on each channel, so each channel is quieter. Night is useful at night, when you may want to keep the volume low. To use the volume control of a connected source device, set Auto Volume to Off.
6 6.1 Network Network Setting 6.1.1 Connecting to a Wired Network There are three ways to attach your product to your LAN using cable. You can attach your product to your LAN by connecting the LAN port on the back of your product to an external modem using a LAN cable. See the diagram below.
6 Network access the Internet so you do not have to enter them manually. Most home networks are Dynamic Networks. Some networks require a Static IP address. If your network requires a Static IP address, you must enter the IP address, subnet mask, gateway, and DNS values manually on your product Cable Setup Screen when you set up the network connection. To get the IP address, subnet mask, gateway, and DNS values, contact your Internet Service Provider (ISP).
6 Network 6.1.2 Wired Network Settings MENU [m] Network Network Settings ENTER [ ] Set the network connection to use Internet services such as perform software upgrades. Network Settings No network cable or Samsung Wireless LAN Adapter connected. Please plug in a network cable or a Samsung Wireless LAN Adapter. Start Cancel The displayed image may differ depending on the model.
6 Network 3 4 On the dialog that appears, click the Support tab. On the Support Tab, click the Details button. The Network connection values are displayed. How to set up manually To set up your product cable network connection manually, follow these steps. 1 2 Go to the Network Settings screen. Select Start, press [ ], and then press [ ] again. The network test screen appears and the verification process starts. 3 Press [ ]. The verification process stops.
6 Network 6.1.3 Connecting to a Wireless Network To connect your product to your network wireless, you need a wireless router or modem and a Samsung Wireless LAN adapter (WIS10ABGN, WIS12ABGNX) , which you connect to your product back or side panel USB port. See the illustration below.
6 Network The product may not recognize the “Samsung Wireless LAN adapter” if you connect it to the product with a USB hub or USB extension cable other than the cable supplied with the product. 6.1.4 Wireless Network Setting Automatic Network Setup Most wireless networks have an optional security system that requires devices that access the network to transmit an encrypted security code called an Access or Security key(Security Key).
6 Network Manual Network Setup Use the Manual Network Settings when connecting your product to a network that requires a Static IP address or if the automatic connection process has failed. Getting the Network Connection Values To view the Network connection values on most Windows computers, follow these steps. 1 2 3 4 Right click the Network icon on the bottom right of the screen. In the pop-up menu that appears, click Status. On the dialog that appears, click the Support tab.
6 Network 12 13 Enter the next portion of the IP Address. Press the button to go to the next field. Repeat the entry process for each field in the IP Address. If you make a mistake when entering a number, re-enter the number to correct it. You can also press the 14 15 16 17 or button to change the number one unit at a time. When done entering the IP Address, press [ Press the ]. button to go to the Subnet Mask fields, and then press [ ].
6 6.2 Network Network Status MENU [m] Network ENTER [ Network Status ] You can check the current network and Internet status. Network Status Your wireless network and Internet connection are setup and ready to use. 00 : 12 : fb : df : 29 : 76 ***. ***. ***. ***. ***. ***. ***. ***. ***. ***. ***. ***. ***. ***. ***. ***. (None) MAC Address IP Address Subnet Mask Gateway DNS Server Proxy server You are connected to the Internet.
6 6.4 Network Soft AP MENU [m] Network Soft AP ENTER [ ] Using this function, you can connect the product on your mobile devices if your mobile devices do not support Wi-Fi Direct. Set the options for connection of Wi-Fi device. Soft AP Turns on or off the Soft AP. When Soft AP is set to On, your mobile devices can find the product name in Wi-Fi connection list. Security key(Security Key) Set the Security key(Security Key) manually using the remote control.
6 6.5 Network AllShare Settings MENU [m] Network AllShare Settings ENTER [ ] Shows a list of mobile phones or connected devices which have been set up to use the AllShare Play function with this product. Allow / Deny: Allows/Blocks the devices. Delete from the list: Deletes the devices from the list. This function only deletes the name of the device from the list. If the deleted device is turned on or tries to connect to the product, it may appear on the list again. 6.5.
7 7.1 System Multi Control MENU [m] System Multi Control ENTER [ ] Assign an individual ID to your product. 7.1.1 Configuring settings for Multi Control ID Setup Assign an ID to a set. (Range: 0~99) Press or to select a number, and press [ ]. ID Input Enter the ID number of the product connected to the input cable for input signal reception. Enter the number you want using the number buttons on the remote control.
7 7.2 System Time MENU[m] System Time ENTER [ ] You can configure Clock Set or Sleep Timer. You can also set the product to automatically turn on or off at a specified time using the Timer function. 7.2.1 Clock set Set the clock to use the various various timer features of the product. Changing the Setting for Clock Clock Set Set the Date and Time. Select Clock Set. Select Date or Time, and then press [ ]. Use the number buttons to enter numbers or press the up and down arrow buttons.
7 System 7.2.3 On Timer Set On Timer so that your product turns on automatically at a time and on a day of your choosing. On Timer: Set the on timer by making a selection from one of the seven options. Ensure you set the current time first. (On Timer 1~ On Timer 7) You must set the clock before you can use On Timer. Setup: Select Off, Once, Everyday, Mon~Fri, Mon~Sat, Sat~Sun or Manual. If you select Manual, you can choose the days you want On Timer to turn on your product.
7 System 7.2.5 Holiday Management Timer will be disabled during a period specified as a holiday. Setting Holiday Management Add: Specify the period you want to add as a holiday. Select the start and end dates of the holiday you want to add using the / buttons, and click the Save button. The period will be added to the list of holidays. - Start: Set the start date of the holiday. - End: Set the end date of the holiday. - Delete: Delete all items from the list of holidays. Select Delete.
7 7.3 System Language MENU[m] System Language ENTER [ ] Set the menu language. A change to the language setting will only be applied to the onscreen menu display. It will not be applied to other functions on your PC. 7.4 Rotate menu(Rotate Menu) MENU[m] System ENTER [ Rotate menu(Rotate Menu) ] Landscape: Display the menu in landscape mode (default). Portrait: Display the menu in portrait mode on the right side of the product screen.
7 System While Energy Saving mode is active, the product power consumption will be controlled to save power. Off / Low / Medium / High / Picture Off 7.5.2 Eco Sensor (Off / On) To enhance your power savings, the picture settings will automatically adapt to the light in the room. Adjusting the Backlight setting under Picture while Eco Sensor is on will disable the Off. Min. Backlight: When Eco sensor is On, you can manually adjust the minimum screen brightness.
7 7.6 System Security MENU [m] System Security ENTER [ ] Every time you access the Security functions, the PIN screen will appear and the default PIN number is “0-0-0-0". The PIN screen closes and the Security menu appears. Security Safety Lock Off Button Lock Off Change PIN The displayed image may differ depending on the model. 7.6.1 Safety Lock (Off / On) It sets safe lock function.
7 7.7 System PIP MENU [m] System PIP ENTER [ , ] If you have set Double ( Size. ) mode in PIP (Picture-in-Picture), you cannot adjust the Picture For PIP sound, refer to the Sound Select instructions. If you turn the product off while watching in the PIP mode, PIP mode will remain after power Off/On. You may notice that the picture in the PIP screen becomes slightly unnatural when you use the main screen to view a game or karaoke.
7 System 7.9 Off / 2 hours / 4 hours / 8 hours / 10 hours Screen Burn Protection MENU [m] System Screen Burn Protection ENTER [ ] To reduce the possibility of screen burn, this unit is equipped with Pixel Shift screen burn prevention technology. Pixel Shift moves the picture slightly on the screen. The Pixel Shift Time setting allows you to programme the time between movements of the picture in minutes.
7 System 7.9.2 Timer You can set the timer for Screen Burn Protection. Timer Off Repeat: Display the image retention-preventive pattern set in Mode at specified time intervals (Period). Period and Time can be configured when Repeat is selected. Interval: Display the image retention-preventive pattern set in Mode for a specified period of time (from Start Time to End Time). The option is enabled only when Clock Set is configured. Mode: Select a screen protective pattern to display.
7 System 7.9.4 Side Grey(Side Gray) When the screen is set to 4:3 aspect ratio, adjust the brightness of white margins on sides to protect the screen. Off / Light / Dark 7.10 Ticker Input text while a video or image is displayed and display the text on the screen. Off / On Message, Time, Position, Motion, and Font options(Font Options) are enabled only when Ticker is set to On. Message: Enter a message to display on the screen.
7 System 7.11 Video Wall MENU [m] System Video Wall ENTER [ ] Customize the layout of multiple displays that are connected to form a video wall. In addition, display part of a whole picture or repeat the same picture on each of the connected multiple displays. To display multiple images, refer to MDC Help or the MagicInfo user guide. Some models may not support the MagicInfo function.
7 System 7.11.3 Horizontal This function automatically divides the screen according to the specified number of horizontal displays. Enter the number of horizontally arranged displays. The horizontal screen will automatically be divided according to the number entered. A maximum of 15 displays can be assigned to the horizontal arrangement. The screen can be divided into a maximum of 100 screens (horizontal and vertical screens multiplied).
7 System 7.12 Source AutoSwitch Settings MENU [m] System Source AutoSwitch Settings ENTER [ ] Turning on the display with Source AutoSwitch On, and the previous video source selection is not active, the display will automatically search the different video input sources for active video. Source AutoSwitch When the Source AutoSwitch is On, the display video source will automatically be searched for active video.
7 System 7.13 General MENU [m] System General ENTER [ ] General Max. Power Saving On Game Mode Off BD Wise On Menu Transparency Medium Sound Feedback Off Auto Power Off Standby Control Auto The displayed image may differ depending on the model. 7.13.1 Max. Power Saving Turns off the product to reduce power consumption after the PC has been left idle for a specified period of time. Available only PC, DVI, HDMI, DisplayPort mode. 7.13.
7 System 7.13.3 BD Wise Provides the optimal picture quality for Samsung DVD, Blu-ray and Home Theatre products which support BD Wise. When BD Wise is turned On, the picture mode is automatically changed to the optimal resolution. Available when you connect Samsung products that support BD Wise through an HDMI cable to the product. 7.13.4 Menu Transparency Adjust transparency of menu box. High / Medium / Low 7.13.5 Sound Feedback Your product gives sound feedback when you use product.
7 System 7.13.8 Lamp Schedule Enables the lamp value to be adjusted to a user-specified value at a specified time in MDC mode. Off / On 7.13.9 OSD Display Displays or hides a menu item on the screen. Source OSD / No Signal OSD / MDC OSD 7.13.10 Power On Adjustment You can set the warm-up time for the screen to turn on after the power button is pressed. (Range: 0 – 50 seconds) A warm-up time that is too short may damage the product due to overvoltage. 7.13.
7 System 7.14 Anynet+(HDMI-CEC) MENU [m] 7.14.1 System Anynet+(HDMI-CEC) ENTER [ ] Anynet+(HDMI-CEC) What is Anynet+? Anynet+ is a function that enables you to control all connected Samsung devices that support Anynet+ with your Samsung product remote. The Anynet+ system can be used only with Samsung devices that have the Anynet+ feature. To be sure your Samsung device has this feature, check if there is an Anynet+ logo on it.
7 System Anynet+ Menu (device_name) Tools Description Shows the tools menu of the connected device. E.g. if a DVD player is connected, the tools menu of the DVD player will appear. Depending on the device, this menu may not be available. (device_name) Title Menu Shows the title menu of the disc in the connected device. E.g. If a DVD player is connected, the title menu of the movie in the DVD player will appear. Depending on the device, this menu may not be available. 7.14.
7 System Troubleshooting for Anynet+ Problem Anynet+ does not work. Possible Solution Check if the device is an Anynet+ device. The Anynet+ system supports Anynet+ devices only. Check if the Anynet+ device power cord is properly connected. Check the Anynet+ device’s Video/Audio/HDMI cable connections. Check whether Anynet+ (HDMI-CEC) is set to On in the Anynet+ setup menu. Check whether the remote control is Anynet+ compatible.
7 System 7.15 DivX® Video On Demand MENU [m] System DivX® Video On Demand ENTER [ ] Shows the registration code authorized for the product. If you connect to the DivX web site and register using that code, you can download the VOD registration file. For more information about DivX® VOD, visit http://vod.divx.com. 7.16 Play Mode(Player Mode) MENU [m] System Play Mode(Player Mode) ENTER [ ] Select Play Mode(Player Mode). Changing Play Mode(Player Mode) will change the functions in Contents Home.
7 System 7.18 Reset System MENU [m] System Reset System ENTER [ ] This option returns the current settings under system to the default factory settings. 7.19 Reset All MENU [m] System Reset All ENTER [ ] This option returns all the current settings for a display to the default factory settings. (Language, Security, Time, Multi Control and Anynet+ will not be initialized.) 7.
8 8.1 Support Software Update MENU [m] Support Software Update ENTER [ ] The Software Update menu lets you upgrade your products software to the latest version. Current Version: This is the software version already installed in the product. Be careful not to turn off the power until the upgrade is complete. The product will turn off and on automatically after completing the software update. When you upgrade software, all video and audio settings you have made will return to their default settings.
8 8.2 Support Contact Samsung MENU [m] Support Contact Samsung ENTER [ ] View this information when your product does not work properly or when you want to upgrade the software. You can find information regarding our call centres and how to download products and software. 8.3 Contents Home MENU [m] Support Contents Home ENTER [ ] You can enjoy useful and various contents. The displayed image may differ depending on the model. 8.3.
8 Support Play content files and templates from USB memory or built-in memory. Alternatively, play content files and templates via MagicInfo Premium Server over a network. Refer to page 221 for details about the MagicInfo Premium S menu. 8.3.3 MagicInfo Videowall S MENU [m] Support Contents Home MagicInfo Videowall S ENTER [ ] MagicInfo Videowall S can also be accessed by pressing MagicInfo Lite on the remote control.
8 Support 8.3.5 Source Source allows you to select a variety of sources and change source device names. You can display the screen of a source device connected to the product. Select a source from Source List to display the screen of the selected source. The input source can also be changed by using the SOURCE button on the remote control. The screen may not display correctly if an incorrect source is selected for the source device you want to convert to.
9 9.1 AllShare Play Enjoy videos, photos, music files saved on a USB Mass Storage Class (MSC) device. What is AllShare Play? Play photo, video or music files saved on a storage device. Wirelessly connect a smartphone to a PC using a wireless network. Play various content using one of the following methods in AllShare Play: Using internal memory and a USB device: Play video, photo and music files from a USB device. Copy the files to the internal memory.
9 AllShare Play The screensaver activates if the product is left idle for a period of time specified in Auto Protection Time. Power-saving mode on some external hard disk drives may automatically deactivate after connecting to the product. File system and formats Allshare play may not function properly with unlicensed multimedia files. Media Transfer Protocol (MTP) is not supported. Supported file systems include FAT16, FAT32 and NTFS (read only).
9 AllShare Play 9.1.2 Using a USB device Connecting a USB device 1 2 Turn on your product. Connect a USB device containing photo, music and/or movie files to the USB port on the back or side panel of the product. 3 A message "New device connected" appears when the USB device is connected properly. Select type of content to play from Videos, Photos, and Music. If only one USB device is connected, files saved on the USB device are displayed automatically.
9 AllShare Play 9.1.3 Connecting to a PC over a network Play photo, video and music files saved on a PC through a network connection in AllShare Play mode. For details on how to configure a network, refer to the section "6.1 Network Setting". To view content saved on the PC, connect the product and PC to the same wireless router and visit http://www.samsung.com to download the AllShare PC software. Ensure the product and PC are connected to the same network subnet.
9 AllShare Play 9.1.4 Using the AllShare Play features If you connect the product and a source device such as a cell phone or PC to the same network, you can play media content saved on the device such as videos, photos and music. Visit http://www.samsung.com or contact the Samsung Electronics Customer Centre for more information. Additional software may need to be installed on your mobile device. Refer to the mobile device user manual for details.
9 9.2 AllShare Play Using the Basic AllShare Play Features MENU [m] Support Contents Home AllShare Play ENTER [ ] AllShare A ll Play / My list / Recently Played My list Videos Recently played files will be displayed here. What's new Updated files will be displayed here. Photos Playlist Music No playlists have been created. Create a playlist to quickly and easily access your content. Login Return The displayed image may differ depending on the model. 9.2.
9 AllShare Play 9.2.2 Playing Selected Files 1 2 Select files from the list of Videos, Photos, or Music files. Press TOOL on the remote control and select Play selection(Selection Play). The option does not appear if a folder is highlighted by the cursor. 3 Select files and press Play. c appears for selected files. To select all the files in the current folder, press Select All. To deselect all the files, press Deselect All. 9.2.
9 AllShare Play 9.2.4 Creating a Playlist 1 2 Select files from the list of Videos, Photos, or Music files. Press TOOL on the remote control and select Add to Playlist. The option does not appear if a folder is highlighted by the cursor. 3 Select files and press Add. The Add to Playlist page appears. 4 5 6 c appears for selected files. To select all the files in the current folder, press Select All. To deselect all the files, press Deselect All. Select Create new(Create New).
9 9.3 AllShare Play My list(My List) MENU [m] ENTER [ Support Contents Home AllShare Play My list(My List) ] Access desired content more conveniently and quickly. To play files, select files or a Playlist and press [ ]. Recently played: Display video, photo or music files that were recently played. This mode is suitable when playing files again that were played before. What's new: Display new video, photo or music files that were uploaded to a PC or USB device.
9 Videos MENU [m] Support Contents Home AllShare Play Videos ENTER [ ] 9.4.1 Playing a Video Select the internal memory or a USB device. Select files from the list of files. Press the [ ] button or [ ▶ ] (Play) button. The file name appears on the top with its playing time. If video time information is unknown, the playing time and progress bar are not displayed. During video playback, you can search using the You can use the [ ◀◀ ] (REW), bottom of your remote during playback.
9 9.5 AllShare Play Photos MENU [m] Support Contents Home AllShare Play Photos ENTER [ ] 9.5.1 Viewing a Photo (or Slide Show) 1 2 Select the internal memory or a USB device. Select a file from the list of files. Press the [ ] button. To view files manually, one at a time, press the left or right arrow buttons.
9 Music MENU [m] Support Contents Home AllShare Play Music ENTER [ ] 9.6.1 Playing Music 1 2 Select the internal memory or a USB device. Select files from the list of files. Press the [ ] button or [ ▶ ] (Play) button. When the music is playing, you can search using the [ ◀◀ ] (REW) and [ ◀◀ 9.6 AllShare Play ] (FF) button. If the sound is abnormal when you play MP3 files, adjust the Equalizer in the Sound menu. (An overmodulated MP3 file may cause a sound problem.
9 9.7 AllShare Play Videos / Photos / Music Play Option menu When playing video or photo files, you can press the TOOLS button to display an Options menu. Option Name Operations Videos Photos Music View Sort music files grouped by Folder view, Title, Artist, Album or Genre. c Play selection (Selection Play) Select and play files from a list of music files. c Go to Videos List Return to the list of video files. Go to Photos List Return to the list of photo files.
Option Name Start Slide Show / Stop Slide Show Slide Show Speed Operations Videos Photos Music You can start or stop a slide show. Alternatively, use the remote. ▶ or II c button on the You can select the slide show speed during the slide show. Alternatively, use the ◀◀ 9 AllShare Play ◀◀ c or button on the remote. Slide Show Effect You can set various slide show effects. c Background Music On / Off You can start or stop background music.
9 9.8 AllShare Play Supported Subtitle and AllShare Play file formats 9.8.1 Subtitle External MPEG-4 timed text (.ttxt) SAMI (.smi) SubRip (.srt) SubViewer (.sub) Micro DVD (.sub or .txt) SubStation Alpha (.ssa) Advanced SubStation Alpha (.ass) Powerdivx (.psb) Internal Xsub Container: AVI SubStation Alpha Container: MKV Advanced SubStation Alpha Container: MKV SubRip Container: MKV MPEG-4 timed text Container: MP4 9.8.
9 AllShare Play 9.8.3 Supported music file formats File Extension Type Codec Comments *.mp3 MPEG MPEG1 Audio Layer 3 MPEG4 AAC *.m4a *.mpa *.aac *.3ga *.flac FLAC FLAC The Seek (jump) function is not supported. Supports up to 2 channel 9.8.4 Supported Video Formats Video content will not play, or not play correctly, if there is an error in the content or the container.
9 AllShare Play File Extension Container Video Codec Resolution Frame rate (fps) Bit rate (Mbps) DIVX 3.11 / 4.x / 5.x / 6.x *.avi *.mkv *.asf MPEG4 SP / ASP *.wmv AC3 *.mp4 *.mov *.3gp *.vro *.mpg *.mpeg *.ts *.tp *.trp *.mov *.flv Audio Codec AVI MKV ASF LPCM H.264 BP / MP / HP 1920 x 1080 Motion JPEG 30 6 ~ 30 AAC MP4 3GP VRO VOB HE-AAC Window Media Video v9 WMA DD+ MPEG(MP3) MPEG2 PS TS *.vob ADMPCM (IMA, MS) DTS Core MPEG1 VP6 640 x 480 4 G.711 (A-Law, μLaw) *.svi *.
10 MagicInfo Lite 10.1 File Formats Compatible with MagicInfo Lite Player To launch MagicInfo Lite, select MagicInfo Lite for the Play Mode(Player Mode) on the System. [Read before using MagicInfo Lite Player] The file system supports FAT16, FAT32 and NTFS. A file with a vertical and horizontal resolution larger than the maximum resolution cannot be played. Check the vertical and horizontal resolution of the file. Check the supported video and audio Codec types and Versions.
10 MagicInfo Lite 10.1.1 Contents File Extension Container Video Codec Resolution Frame rate (fps) Bit rate (Mbps) Audio Codec DIVX 3.11 / 4.x / 5.x / 6.x *.avi *.mkv *.asf MPEG4 SP / ASP *.wmv *.mp4 AC3 *.mov AVI *.3gp MKV *.vro ASF *.mpg MP4 *.mpeg 3GP *.ts VRO *.tp VOB *.trp PS *.flv TS H.264 BP / MP / HP LPCM 1920 x 1080 30 Motion JPEG AAC HE-AAC WMA 6 ~ 30 Window Media Video v9 DD+ MPEG(MP3) DTS Core MPEG2 G.711 (A-Law, μLaw) MPEG1 *.vob *.svi *.m2ts *.
10 MagicInfo Lite Video 3D video is not supported. Content with a resolution larger than the resolution specified in the table above is not supported. Video content with a Bit rate or Frame rate larger than the rate specified in the table above can cause choppy video during playback. Video content will not play, or not play correctly, if there is an error in the content or the container. Some USB/digital camera devices may not be compatible with the player. Supports up to H.
10 MagicInfo Lite Flash Compatible with Flash 10.1 Flash Animation Compatible file format : SWF Recommended resolution : 960 x 540 Caution Performance comparable to Flash Player on a Windows operating system cannot be guaranteed Optimization is needed during content creation Flash Video Compatible file format : FLV Video - Codec : H.264 BP - Resolution : 1920 x 1080 Audio - Codec : H.
10 MagicInfo Lite PDF Compatible document file formats Extension : pdf Functions not supported Content less than 1 pixel not supported because of performance degradation issue. Masked Image, Tiled Image content not supported. Content with Rotated Text, not supported. 3D Shadow Effects not supported. WORD Compatible document file formats Extension : .doc, .
10 MagicInfo Lite Approving a connected device from the server 1 Access the server you have assigned to your device. 2 3 Enter your ID and password to log in. 4 5 Select Lite from the menus on the left. Select Device from the top menu bar. Select Unapproved from the sub-menus of Lite.
10 6 7 MagicInfo Lite Select the Approve button for your device from the list of unapproved Lite devices. Enter the information required to approve the device. Device Name: Enter the device name. Device Group: Select Location: Enter the current location of the device. to specify the group. Pressing the INFO button on the remote when a network schedule is running will display the details of the schedule. Check that the correct device has been selected by viewing the device ID in the details.
10 MagicInfo Lite Setting the current time A schedule may not run if the time set on the device is different from the server's current time. 1 Go to the tabs Device 2 3 Select your device. Time. Select Clock Set, and sync the time with the server. When connecting to the server for the first time, the time on the product is set using the GMT time of the region where the server is installed. The time on the product can be changed from the server as shown in step 3.
10 MagicInfo Lite 10.2 MagicInfo Lite MENU [m] Support Contents Home MagicInfo Lite ENTER [ ] To launch MagicInfo Lite, select MagicInfo Lite for the Play Mode(Player Mode) on the System. Press the MagicInfo Lite/S button on the remote control. 10.2.1 Network Schedule You can view whether the server is connected (approval) in the MagicInfo Lite menu screen. To view whether the server is connected when a Network schedule is running, press INFO on the remote.
10 2 MagicInfo Lite Select Network schedule in the MagicInfo Lite player menu.
10 MagicInfo Lite 10.2.2 Local schedule Go to Local schedule Manager Select the content you want to run This menu is disabled if there was no schedule run previously in Local schedule Manager. 1 Select Local schedule in the MagicInfo Lite player menu screen. Run schedules created in Local schedule Manager.
10 MagicInfo Lite 10.2.3 Internal AutoPlay The option is enabled only when there is at least one content item, except for music files, in Internal Memory. 1 Select Internal AutoPlay in the MagicInfo Lite player menu screen. Play content, which has been copied to Internal Memory, in alphabetical order.
10 MagicInfo Lite 10.2.4 1 USB AutoPlay The option is enabled only when there is at least one content item, except for music files, in the "MagicInfoSlide" folder on USB Storage. Ensure a USB device is inserted. Be sure to create a folder named "MagicInfoSlide" in the USB device and put content in the folder. USB AutoPlay automatically runs when a USB device is connected, regardless of whether the Internal AutoPlay is running. Select USB AutoPlay in the MagicInfo Lite player menu screen.
10 MagicInfo Lite 10.3 Local Schedule Manager Configure the settings for playback from Local schedule. Alternatively, select and play content from internal or USB memory according to the customized playback sequence. 10.3.1 Registering a Local schedule 1 Select Local Schedule Manager in the MagicInfo Lite menu screen.
10 3 MagicInfo Lite Select Time to set the time you want to play content. Create Time 12 : --:-- am ~ --:-- pm 00 am ~ Contents 12 : 00 pm No Item Time --:-- am~ --:-- pm Contents No Items Save Cancel Return A maximum of 24 schedules can be created. If more than one schedule is created, the start time must be different for each schedule.
10 5 MagicInfo Lite Select Duration Duration Content Duration Menu1.jpg 00:00:05 Menu2.jpg 00:00:05 Up Down Save Cancel Return Specify the sequence and time duration to play content files. Changing the playing sequence Select a content file and change the sequence using the Up or Down button. Duration Set the duration to play content. Duration cannot be specified for videos. Duration must be at least 5 seconds. Press Save to save the settings. 6 Select Save.
10 7 MagicInfo Lite Check that the schedule has been added to the Local Schedule Manager. Local Schedule Manager Storage Internal Memory No Playing Schedule Create Edit Delete All schedule 2012.01.01_1834.
10 MagicInfo Lite 10.3.2 Modifying a Local schedule Ensure at least one Local schedule is registered. 1 Select Local Schedule Manager in the MagicInfo Lite menu screen. MagicInfo Lite MagicInfo Lite player Local Schedule Manager Content manager Close Settings Mode Server USB Local schedule Connected Connected Return 2 Select the local schedule you want to modify. Local Schedule Manager Storage Internal Memory No Playing Schedule Create Edit Delete All schedule 2012.01.01_1834.
10 3 MagicInfo Lite Select Edit. Edit Time Content Time Content Time Content 12:00 am ~ 12:00 pm Delete Menu1.jpg Menu2.jpg --:-- am ~ --:-- pm No Item Save Cancel --:-- am ~ --:-- pm No Item Return 4 Change the details of the local schedule. Next, select Save.
10 MagicInfo Lite 10.3.3 Deleting a Local schedule Ensure at least one Local schedule is registered. 1 Select Local Schedule Manager in the MagicInfo Lite menu screen. MagicInfo Lite MagicInfo Lite player Local Schedule Manager Content manager Close Settings Mode Server USB Local schedule Connected Connected Return 2 Select the local schedule you want to delete. Local Schedule Manager Storage Internal Memory No Playing Schedule Create Edit Delete All Schedule 2012.01.01_1834.
10 MagicInfo Lite 10.3.4 Running a Local schedule Ensure at least one Local schedule is registered. 1 Select Local Schedule Manager in the MagicInfo Lite menu screen. MagicInfo Lite MagicInfo Lite player Local Schedule Manager Content manager Close Settings Mode Server USB Local schedule Connected Connected Return 2 Select the local schedule you want to run. Next, select Run. Local Schedule Manager Storage Internal Memory No Playing Schedule Create Edit Delete All schedule 2012.01.
10 MagicInfo Lite 10.3.5 Stopping a Local Schedule This function is enabled only when a schedule is running. Selecting Stop will change the running mode from Local schedule to Network schedule. 1 Select Local Schedule Manager in the MagicInfo Lite menu screen. MagicInfo Lite MagicInfo Lite player Local Schedule Manager Content manager Close Settings Mode Server USB Local schedule Connected Connected Return 2 Select Stop. Local Schedule Manager Storage Internal Memory [Internal]2012.01.
10 MagicInfo Lite 10.3.6 Viewing the details of a Local schedule 1 Select Local Schedule Manager in the MagicInfo Lite menu screen. MagicInfo Lite MagicInfo Lite player Local Schedule Manager Content manager Close Settings Mode Server USB Local schedule Connected Connected Return 2 Select the local schedule you want to view the details of. Local Schedule Manager Storage Internal Memory No Playing Schedule Create Edit Delete All Schedule 2012.01.01_1834.
10 3 MagicInfo Lite The details of the schedule will be displayed. Information 2012.01.01_1834.lsch 12:00 am~12:00 pm, 2 File(s) - Menu1.jpg Menu2.
10 MagicInfo Lite 10.3.7 Copying a Local schedule 1 Select Local Schedule Manager in the MagicInfo Lite menu screen. MagicInfo Lite MagicInfo Lite player Local Schedule Manager Content manager Close Settings Mode Server USB Local schedule Connected Connected Return 2 Select a storage device where the local schedule files to copy are saved. Local Schedule Manager Internal Memory Internal Memory Storage Playing Schedule No P USB Create Edit Delete All Schedule 2012.01.01_1834.
10 3 MagicInfo Lite Select local schedule files and press Copy. Local Schedule Manager Storage Internal Memory No Playing Schedule Create Edit Delete All schedule 2012.01.01_1834.lsch Run Info Copy Close Return 4 A window appears asking if you want to copy the files to the Internal Memory or USB memory device. Select Yes to copy the files.
10 MagicInfo Lite 10.4 Content Manager 10.4.1 Copying content 1 Select Content manager in the MagicInfo Lite menu screen. MagicInfo Lite MagicInfo Lite player Local Schedule Manager Content manager Close Settings Mode Server USB Local schedule Connected Connected Return 2 Select the content you want to copy. Content manager Internal Memory USB No Item Folder1 Menu1.jpg Menu2.jpg Copy Free Space 5549.2MB Free Space 6227.2MB Selected File(s) 0.0MB (0) Selected File(s) 0.
10 MagicInfo Lite 10.4.2 Deleting content 1 Select Content manager in the MagicInfo Lite menu screen. MagicInfo Lite MagicInfo Lite player Local Schedule Manager Content manager Close Settings Mode Server USB Local schedule Connected Connected Return 2 Select the content you want to delete. Next, select Delete. Content under Internal Memory and USB memory can be deleted at the same time. Content manager Internal Memory Menu3.jpg USB Folder1 Menu4.jpg Menu1.jpg Menu2.
10 MagicInfo Lite 10.5 Settings The displayed image may differ depending on the model. Settings Server Network Settings Default content duration Content ratio Image Effect Random Default content Screen layout Schedule Name Close None Landscape YYYYMMDD Safety Remove USB Device Return 10.5.1 Server Network Setting To run MagicInfo Lite, connect to a network. Server Enter the MagicInfo Lite, server settings. (E.g.: http://192.168.0.
10 MagicInfo Lite If a Network Settings is running when USB memory is not connected, the default content will run. 10.5.2 Default content duration Specify the duration to play content. Image Viewer Time, PPT Viewer Time, PDF viewier time, Flash viewer time The duration must be at least 5 seconds. 10.5.3 Content ratio Specify the display aspect ratio by type when playing content. PPT ratio, PDF ratio, Video ratio Original: Display content with the original size.
10 MagicInfo Lite 10.5.8 Safety Remove USB Device(Safety Remove USB) Safely removes USB memory 10.5.9 Delete all content Delete all the content files in Internal Memory. 10.5.10 Reset Settings Restore all the values under Settings to the default when the product was purchased.
10 MagicInfo Lite 10.6 When Content is Running 10.6.1 Viewing the details of the content that is running The displayed image may differ depending on the model. Information Software Version : A-LUBXGDSP-0100.9 Device Name : Monitor Device ID : FF-FF-FF-FF-FF-FF Mode : Local schedule Server : Disconnected USB : Connected Schedule download : No Schedule to download Close Press the INFO button on the remote control.
10 MagicInfo Lite 10.6.2 Changing the settings for the content that is running The displayed image may differ depending on the model. Tools Picture Mode Standard Sound Mode Standard PIP Off Background Music Off Background Music Setting Safely Remove USB Device Return Press the TOOLS button on the remote control.
11 MagicInfo Premium S 11.1 File Formats Compatible with MagicInfo Premium S Player A licence needs to be purchased to use MagicInfo Premium S. To download the software, go to the Samsung homepage at http://www.samsunglfd.com. To purchase a licence, contact a Customer Server Centre. To launch MagicInfo Premium S, select MagicInfo Premium S for the Play Mode(Player Mode) on the System. [Read before using MagicInfo Premium S Player] The file system supports FAT16, FAT32 and NTFS.
11 MagicInfo Premium S Video 3D video is not supported. Content with a resolution larger than the resolution specified in the table above is not supported. Video content with a Bit rate or Frame rate larger than the rate specified in the table above can cause choppy video during playback. Video content will not play, or not play correctly, if there is an error in the content or the container. Some USB/digital camera devices may not be compatible with the player. Supports up to H.
11 MagicInfo Premium S Flash Compatible with Flash 10.1 Flash Animation Compatible file format : SWF Recommended resolution : 960 x 540 Caution - Performance comparable to Flash Player on a Windows operating system cannot be guaranteed Optimization is needed during content creation Flash Video Compatible file format : FLV Video - Codec : H.264 BP - Resolution : 1920 x 1080 Audio - Codec : H.
11 MagicInfo Premium S PDF Compatible document file formats Extension : pdf Functions not supported Content less than 1 pixel not supported because of performance degradation issue. Masked Image, Tiled Image content not supported. Content with Rotated Text, not supported. 3D Shadow Effects not supported. Some characters not supported (Special characters may be corrupted) WORD Compatible document file formats Extension : .doc, .
11 MagicInfo Premium S 11.1.1 Network Schedule Multiframe Playback restrictions A maximum of two video (Videos) files can be played. If PIP mode is enabled, more than one video (Videos) file cannot be played. More than one Flash files cannot be played. For Office files (PPT and Word files) and PDF files, only one file type is supported at a time. LFD(.lfd) files are not supported. Sound output restrictions More than one sound output cannot be used.
11 MagicInfo Premium S Sound output restrictions More than one sound output cannot be used. Playback priority: Flash file > network BGM > local BGM > video file in the main frame selected by the user. User-selected main frame: Sound output can be selected in step 3 while authoring in Template Manager 11.1.3 Others Flash performance can be slower on a PC (H/W performance restrictions) PIP function restrictions PIP function is not available during Flash playback.
11 MagicInfo Premium S Approving a connected device from the server 1 Access the server you have assigned to your device. 2 3 Enter your ID and password to log in. 4 Select Premium from the menus on the left. Select Device from the top menu bar.
11 MagicInfo Premium S 5 Select Unapproved from the sub-menus of Premium. 6 7 Select the Approve button for your device from the list of unapproved Lite devices. Enter the information required to approve the device. Device Name: Enter the device name. Device Group: Select Location: Enter the current location of the device. to specify the group. Pressing the INFO button on the remote when a network schedule is running will display the details of the schedule.
11 MagicInfo Premium S 8 Select the All menu to check that the device has been registered. 9 When the device is approved by the server, the schedule registered in the selected group will be downloaded to the device. The schedule will run after it is downloaded. For further details on how to configure a schedule, refer to the . If a device is deleted from the list of devices approved by the server, the device will reboot to reset its settings.
11 MagicInfo Premium S Setting the current time A schedule may not run if the time set on the device is different from the server's current time. 1 Go to the tabs Device 2 3 Select your device. Time. Select Clock Set, and sync the time with the server. When connecting to the server for the first time, the time on the product is set using the GMT time of the region where the server is installed The time on the product can be changed from the server as shown in step 3.
11 MagicInfo Premium S 11.2 MagicInfo Premium S MENU [m] Support Contents Home MagicInfo Premium S ENTER [ ] To launch MagicInfo Premium S, select MagicInfo Premium S for the Play Mode(Player Mode) on the System. Press the MagicInfo Lite/S button on the remote control. 11.2.1 Network Schedule You can view whether the server is connected (approval) in the MagicInfo Premium S menu screen. To view whether the server is connected when a Network schedule is running, press INFO on the remote.
11 2 MagicInfo Premium S Select Network Schedule in the MagicInfo Premium S Player menu. MagicInfo Premium S Player Network schedule Local schedule Template Player Close Internal AutoPlay USB AutoPlay Mode Server USB Local schedule Connected Connected Return 11.2.2 Local Schedule Go to Local Schedule Manager Select the content you want to run This menu is disabled if there was no schedule run previously in Local Schedule Manager.
11 MagicInfo Premium S 11.2.3 Template Player Go to Template Manager Select the content you want to run This menu is disabled if there was no schedule run previously in Template Manager. 1 Select Template Player in the MagicInfo Premium S Player menu screen. Run schedules created in Template Manager.
11 MagicInfo Premium S 11.2.4 Internal AutoPlay The option is enabled only when there is at least one content item, except for music files, in Internal Memory. 1 Select Internal AutoPlay in the MagicInfo Premium S Player menu screen. Play content, which has been copied to Internal Memory, in alphabetical order.
11 MagicInfo Premium S 11.2.5 1 USB AutoPlay The option is enabled only when there is at least one content item, except for music files, in the "MagicInfoSlide" folder on USB Storage. Ensure a USB device is inserted. Be sure to create a folder named "MagicInfoSlide" in the USB device and put content in the folder. USB AutoPlay automatically runs when a USB device is connected, regardless of whether the Internal AutoPlay is running.
11 MagicInfo Premium S 11.3 Local Schedule Manager Configure the settings for playback from Local Schedule. Alternatively, select and play content from internal or USB memory according to the customized playback sequence. 11.3.1 Registering a Local Schedule 1 Select Local Schedule Manager in the MagicInfo Premium S menu screen.
11 3 MagicInfo Premium S Select Time to set the time you want to play content. Create Time 12 : --:-- am ~ --:-- pm 00 am ~ Contents 12 : 00 pm No Item Time --:-- am~ --:-- pm Contents No Items Save Cancel Return A maximum of 24 schedules can be created. If more than one schedule is created, the start time must be different for each schedule.
11 5 MagicInfo Premium S Select Duration Duration Contents Duration Menu1.jpg 00:00:05 Menu2.jpg 00:00:05 Up Down Save Cancel Return Specify the sequence and time duration to play content files. Changing the playing sequence Select a content file and change the sequence using the Up or Down button. Duration Set the duration to play content. Duration cannot be specified for videos. Duration must be at least 5 seconds. Press Save to save the settings. 6 Select Save.
11 7 MagicInfo Premium S Check that the schedule has been added to the Local Schedule Manager. Local Schedule Manager Storage Internal Memory No Playing Schedule Create Edit Delete All Schedules 2012.01.01_1834.
11 MagicInfo Premium S 11.3.2 Modifying a Local Schedule Ensure at least one Local Schedule is registered. 1 Select Local Schedule Manager in the MagicInfo Premium S menu screen. MagicInfo Premium S MagicInfo Premium S Player Local Schedule Manager Template Manager Close Content Manager Settings Mode Server USB Local schedule Connected Connected Return 2 Select the local schedule you want to modify.
11 3 MagicInfo Premium S Select Edit. Edit Time Contents Time Contents Time Contents 12:00 am~ 12:00 pm Delete Menu1.jpg Menu2.jpg --:-- am ~ --:-- pm No Items Save Cancel --:-- am ~ --:-- pm No Items Return 4 Change the details of the local schedule. Next, select Save.
11 MagicInfo Premium S 11.3.3 Deleting a Local schedule Ensure at least one Local schedule is registered. 1 Select Local Schedule Manager in the MagicInfo Premium S menu screen. MagicInfo Premium S MagicInfo Premium S Player Local Schedule Manager Template Manager Close Content Manager Settings Mode Server USB Local schedule Connected Connected Return 2 Select the local schedule you want to delete.
11 MagicInfo Premium S 11.3.4 Running a Local Schedule Ensure at least one Local schedule is registered. 1 Select Local Schedule Manager in the MagicInfo Premium S menu screen. MagicInfo Premium S MagicInfo Premium S Player Local Schedule Manager Template Manager Close Content Manager Settings Mode Server USB Local schedule Connected Connected Return 2 Select the local schedule you want to run. Next, select Run.
11 MagicInfo Premium S 11.3.5 Stopping a Local Schedule This function is enabled only when a schedule is running. Selecting Stop will change the running mode from to Local schedule to Network schedule 1 Select Local Schedule Manager in the MagicInfo Premium S menu screen. MagicInfo Premium S MagicInfo Premium S Player Local Schedule Manager Template Manager Close Content Manager Settings Mode Server USB Local schedule Connected Connected Return 2 Select Stop.
11 MagicInfo Premium S 11.3.6 Viewing the details of a Local Schedule 1 Select Local Schedule Manager in the MagicInfo Premium S menu screen. MagicInfo Premium S MagicInfo Premium S Player Local Schedule Manager Template Manager Close Content Manager Settings Mode Server USB Local schedule Connected Connected Return 2 Select the local schedule you want to view the details of. Local Schedule Manager Storage Internal Memory No Playing Schedule Create Edit Delete All Schedule 2012.01.
11 3 MagicInfo Premium S The details of the schedule will be displayed. Information 2012.01.01_1834.lsch 12:00 am~12:00 pm, 2 File(s) - Menu1.jpg Menu2.
11 MagicInfo Premium S 11.3.7 Copying a Local Schedule 1 Select Local Schedule Manager in the MagicInfo Premium S menu screen. MagicInfo Premium S MagicInfo Premium S Player Local Schedule Manager Template Manager Close Content Manager Settings Mode Server USB Local schedule Connected Connected Return 2 Select a storage device where the local schedule files to copy are saved.
11 3 MagicInfo Premium S Select local schedule files and press Copy. Local Schedule Manager Storage Internal Memory No Playing Schedule Create Edit Delete All schedule 2012.01.01_1834.lsch Run Info Copy Close Return 4 A window appears asking if you want to copy the files to the Internal Memory or USB memory device. Select Yes to copy the files.
11 MagicInfo Premium S 11.4 Template Manager 11.4.1 Registering a Template 1 Select Template Manager in the MagicInfo Premium S menu screen. MagicInfo Premium S MagicInfo Premium S Player Local Schedule Manager Template Manager Close Content manager 4FUUJOHT Mode Server Local schedule Connected USB Connected Return 2 Select Create in the Template Manager screen.
11 3 MagicInfo Premium S Select a template in Landscape or Portrait mode. Create Select a template. Landscape Portrait Next Cancel Interlaced signal rotation is not supported. 4 Organize a template by inserting text, video, photo, or PDF files as desired. Create Select the position and the background.
11 MagicInfo Premium S Content Content Type None Content No Item Size Fit to screen Source PC OK Cancel Return Type: Select a file type to use to organize a template. PIP / Videos / Image / Flash / Office / PDF Content: Select a file saved in Internal Memory or a USB device. Size: Specify the screen size when displaying a content file on the template page. Fit to screen / Lock Aspect Ratio Source: This option is enabled when Type is set to PIP.
11 5 MagicInfo Premium S Select sound or background music. Create Create Select sound or background music. Background Music Priview Previous Next Cancel If two Videos files are assigned, select the file with the sound you want to use. 6 If one of the video files includes PIP content, sound from the PIP content can be selected. If one of the files is a Flash file, sound from the Flash file will be enabled. Select Save. Select the memory space you want to save the content to.
11 7 MagicInfo Premium S Check that the template has been added to the Template Manager. Template Manager Storage Internal Memory No Playing Template Create Edit Copy All Templates Delete 20130101_2222.
11 MagicInfo Premium S 11.5 Content Manager 11.5.1 Copying content 1 Select Content manager in the MagicInfo Premium S menu screen. MagicInfo Premium S MagicInfo Premium S Player Local Schedule Manager Template Manager Close Content manager Setting Mode Server USB Local schedule Connected Connected Return 2 Select the content you want to copy. Content manager Internal Memory USB No Item Folder1 Menu1.jpg Menu2.jpg Copy Free Space 5549.2MB Free Space 6227.2MB Selected File(s) 0.
11 MagicInfo Premium S 11.5.2 Deleting content 1 Select Content Manager in the MagicInfo Premium S menu screen. MagicInfo Premium S MagicInfo Premium S Player Local Schedule Manager Template Manager Close Content manager Setting Mode Server USB Local schedule Connected Connected Return 2 Select the content you want to delete. Next, select Delete. Content under Internal Memory and USB memory can be deleted at the same time. Content manager Internal Memory Menu3.jpg USB Folder1 Menu4.
11 MagicInfo Premium S 11.6 Settings The displayed image may differ depending on the model. Settings Server Network Settings Default content duration Content ratio Image Effect Random Default content None Screen layout Schedule Name Close Landscape YYYYMMDD Safety Remove USB Device Return 11.6.1 Server Network Setting To run MagicInfo Premium S, connect to a network. Server Enter the MagicInfo Premium S, server settings.
11 MagicInfo Premium S If a Network schedule is running when USB memory is not connected, the default content will run. 11.6.2 Default content duration Specify the duration to play content. Image Viewer Time, PPT Viewer Time, PDF Viewer time, Flash viewer time The duration must be at least 5 seconds. 11.6.3 Content ratio Specify the display aspect ratio by type when playing content. PPT ratio, PDF ratio, Video ratio Original: Display content with the original size.
11 MagicInfo Premium S 11.6.9 Delete all content Delete all the content files in Internal Memory. 11.6.10 Reset Settings Restore all the values under Settings to the default when the product was purchased.
11 MagicInfo Premium S 11.7 When Content is Running 11.7.1 Viewing the details of the content that is running The displayed image may differ depending on the model. Information Software Version : A-LUBXGDSP-0100.9 Device Name : Monitor Device ID : FF-FF-FF-FF-FF-FF Mode : Local schedule Server : Disconnected USB : Connected Schedule download : No Schedule to download Close Press the INFO button on the remote control.
11 MagicInfo Premium S 11.7.2 Changing the settings for the content that is running The displayed image may differ depending on the model. Tools Picture Mode Standard Sound Mode Standard PIP Off Background Music Off Background Music Setting Safely Remove USB Device Return Press the TOOLS button on the remote control.
12 MagicInfo Videowall S 12.1 File Formats Compatible with MagicInfo Videowall S Player A licence needs to be purchased to use MagicInfo Videowall S. To download the software, go to the Samsung homepage at http://www.samsunglfd.com. To purchase a licence, contact a Customer Server Centre. To launch MagicInfo Videowall S, select MagicInfo Videowall S for the Play Mode(Player Mode) on the System.
12 MagicInfo Videowall S Video 3D video is not supported. Content with a resolution larger than the resolution specified in the table above is not supported. Video content with a Bit rate or Frame rate larger than the rate specified in the table above can cause choppy video during playback. Video content will not play, or not play correctly, if there is an error in the content or the container. Some USB/digital camera devices may not be compatible with the player. Supports up to H.
12 MagicInfo Videowall S 12.1.1 Restrictions Only one video (Videos) file can be played per client. Different content files can be played on the displays of a video wall. Two video (Videos) files cannot be played on a single display of a video wall.
12 MagicInfo Videowall S 12.2 MagicInfo Videowall S MENU [m] ENTER [ ] Support Return [ Contents Home MagicInfo Videowall S ] To launch MagicInfo Videowall S, select MagicInfo Videowall S for the Play Mode(Player Mode) on the System. Press the MagicInfo Lite/S button on the remote control. 12.2.1 Settings The displayed image may differ depending on the model.
12 MagicInfo Videowall S 12.2.4 Screen Layout Change the screen orientation to landscape or portrait view. Landscape / Portrait 12.2.5 Port Check the port number of the server. Use 51001 as the port number. If unable to connect to the server using port number 51001, check with your server administrator to find the correct port number and then change the port number. 12.2.6 Safety Remove USB Device(Safely Remove USB) Safely removes USB memory 12.2.
12 MagicInfo Videowall S 12.3 When Content is Running The displayed image may differ depending on the model. Information Software Version : A-LUBXGDSP-0100.18 Device Name : Monitor Device ID : FF-FF-FF-FF-FF-FF USB : Connected Cancel Press the INFO button on the remote control.
13 Troubleshooting Guide 13.1 Requirements Before Contacting Samsung Customer Service Centre 13.1.1 Testing the Product Before calling Samsung Customer Service Centre, test your product as follows. If the problem persists, contact Samsung Customer Service Centre. Check if your product is operating normally by using the product test function. If the screen remains blank while the power LED blinks even when the product is correctly connected to a PC, perform product testing.
13 Troubleshooting Guide 13.1.3 Check the followings. Installation issue (PC mode) The screen keeps switching on and off. Check the cable connection between the product and PC, and ensure the connection is secure. Blank spaces are found at the top and bottom of the screen when an HDMI or HDMI-DVI cable is connected to the product and PC. Blank spaces on the screen are not caused by the product.
13 Troubleshooting Guide Screen issue The screen is not clear. The screen is blurry. Adjust Coarse and Fine. Remove any accessories (video extension cable, etc) and try again. Set the resolution and frequency to the recommended level. The screen appears unstable and shaky. There are shadows or ghost images left on the screen. Check that the resolution and frequency of the PC and graphics card are set within a range compatible with the product.
13 Troubleshooting Guide Screen issue The screen display does not look normal. Encoded video content may cause the display to appear corrupted in scenes featuring fast moving objects such as in a sports event or action video. Low signal level or low picture quality may cause the display to appear corrupted. This does not mean the product is defective. A cell phone within a distance of one-meter radius may cause static on analogue and digital products. The brightness and colour do not look normal.
13 Troubleshooting Guide Screen issue The screen cannot be displayed in full screen. A scaled SD (4:3) content file can cause black bars on both sides of an HD channel screen. A video with an aspect ratio different from the product can cause black bars at the top and bottom of the screen. Change the screen size setting to full screen on the product or source device. Sound issue There is no sound. Check the connection of the audio cable or adjust the volume. Check the volume. The volume is too low.
13 Troubleshooting Guide Sound issue There is static coming from the speakers. Check the cable connection. Make sure a video cable is not connected to an audio input port. Check the signal strength after connecting a cable. Low signal level can cause corrupted sound. There is audible sound when the volume is muted. When Speaker Select is set to External, the volume button and mute function are disabled. Adjust the volume for the external speakers.
13 Troubleshooting Guide Other issue The product smells like plastic. The plastic smell is normal and disappears over time. The monitor appears tilted. Remove and then attach the stand again to the product. Audio or video cuts out intermittently. Check the cable connection and connect it again if required. Using a very hard or thick cable may corrupt audio and video files. Make sure cables are flexible enough to ensure durability.
13 Troubleshooting Guide Other issue There is no sound in HDMI mode. Displayed picture colours may not look normal. Video or sound may not be available. This can occur if a source device that only supports an older version of the HDMI standard is connected to the product. If these issues occur, connect an audio cable along with the HDMI cable. Some PC graphics cards may not automatically recognize HDMI signals that do not include sound. In this case, manually select a sound input.
13 Troubleshooting Guide Other issue In power-saving mode, when the input source is DP,PC display settings cannot be saved. Go to System General and set Max power saving to off. Alternatively, configure the PC display output settings again. Ensure the set is turned on. When booting the PC with the input source set to DP, the BIOS and booting screens do not appear.
13 Troubleshooting Guide 13.2 Q & A Question How can I change the frequency? Answer Set the frequency on your graphics card. Windows XP: Go to Control Panel Themes Display Settings Appearance and Advanced Monitor and adjust the frequency in Monitor settings. Windows ME/2000: Go to Control Panel Settings Advanced Display Monitor and adjust the frequency in Monitor settings.
13 Troubleshooting Guide Question How can I change the resolution? Answer Windows XP: Go to Control Panel Themes Display Appearance and Settings and adjust the resolution. Windows ME/2000: Go to Control Panel Display Settings and adjust the resolution. Windows Vista: Go to Control Panel Personalization Personalize Appearance and Display Settings and adjust the resolution.
14 Specifications 14.1 General Model Name Panel PE40C Size 40 Class (40 inches /101 cm) Display area 885.6 mm (H) x 498.15 mm (V) 34.866 inches (H) x 19.612 inches (V) Dimensions (W x H x D) 919.6 x 532.0 x 35.1 mm 36.2 x 20.9 x 1.4 inches Weight 13.7 kg / 30.2 Ibs VESA 200 x 200 mm / 7.9 x 7.9 inches Model Name Panel PE46C PE55C Size 46 Class (45.9 inches /116 cm) 55 Class (54.6 inches /138 cm) Display area 1018.08 mm (H) x 572.67 mm (V) 1209.6 mm (H) x 680.4 mm (V) 40.
14 Specifications Model Name Signal connectors PE40C / PE46C / PE55C Input AV IN/COMPONENT IN(common), RGB IN(PC D-Sub), DVI IN, HDMI IN, DP IN, RGB/DVI/HDMI/AV/COMPONENT AUDIO IN, RJ45, RS232C IN, IR/AMBINET SENSOR IN Output IR OUT, AUDIO OUT, DP OUT(LOOP OUT), RS232C OUT USB 2 DOWN Environmental considerations Operating Temperature : 32˚F ~ 104˚F (0˚C ~ 40˚C) Humidity : 10% ~ 80%, non-condensing Storage Temperature : -4˚F ~ 113˚F (-20˚C ~ 45˚C) Humidity : 5% ~ 95%, non-condensing Plug-and-P
14 Specifications 14.2 PowerSaver The power-saving function of this product reduces power consumption by switching off the screen and changing the colour of the power LED if the product is not used for a specified period of time. The power is not turned off in power-saving mode. To switch the screen back on, press any key on the keyboard or move the mouse. Power-savign mode only functions when the product is connected to a PC with a power-saving function.
14 Specifications 14.3 Standard Signal Mode Table This product can be set to only one resolution for each screen size to obtain the optimum picture quality due to the nature of the panel. Using a resolution other than the specified resolution may degrade the picture quality. To avoid this, it is recommended that you select the optimum resolution specified for your monitor. Check the frequency when you exchange a CDT monitor (connected to a PC) for an LCD monitor.
14 Specifications Display Mode Horizontal Frequency (kHz) Vertical Frequency (Hz) Pixel Clock (MHz) Sync Polarity (H/V) VESA, 1366 x 768 47.712 59.790 85.500 +/+ VESA, 1440 x 900 55.935 59.887 106.500 -/+ VESA, 1600 x 900(RB) 60.000 60.000 108.000 +/+ VESA, 1680 x 1050 65.290 59.954 146.250 -/+ VESA, 1920 x 1080 67.500 60.000 148.500 +/+ Horizontal Frequency The time required to scan a single line from the left to the right side of the screen is called a horizontal cycle.
14 Specifications 14.4 Licence Manufactured under licence from Dolby Laboratories. Dolby and the double-D symbol are trademarks of Dolby Laboratories. Ⓡ Manufactured under a licence from U.S. Patent No’s: 5,956,674, 5,974,380, 5,978,762, 6,487,535, 6,226,616, 7,212,872, 7,003,467, 7,272,567, 7,668,723, 7,392,195, 7,930,184, 7,333,929 and 7,548,853. DTS, the Symbol, and DTS and the Symbol together are registered trademarks & DTS Premium Sound | 5.1 is a trademark of DTS, Inc. ¯ 2012 DTS, Inc.
Appendix Contact SAMSUNG WORLD WIDE If you have any questions or comments relating to Samsung products, please contact the SAMSUNG customer care centre. NORTH AMERICA U.S.A 1-800-SAMSUNG (726-7864) http://www.samsung.com CANADA 1-800-SAMSUNG (726-7864) http://www.samsung.com/ca (English) http://www.samsung.com/ca_fr (French) MEXICO 01-800-SAMSUNG (726-7864) http://www.samsung.com LATIN AMERICA ARGENTINE 0800-333-3733 http://www.samsung.com BOLIVIA 800-10-7260 http://www.samsung.
Appendix LATIN AMERICA GUATEMALA 1-800-299-0013 http://www.samsung.com/latin (Spanish) http://www.samsung.com/latin_en (English) HONDURAS 800-27919267 http://www.samsung.com/latin (Spanish) http://www.samsung.com/latin_en (English) JAMAICA 1-800-234-7267 http://www.samsung.com NICARAGUA 00-1800-5077267 http://www.samsung.com/latin (Spanish) http://www.samsung.com/latin_en (English) PANAMA 800-7267 http://www.samsung.com/latin (Spanish) http://www.samsung.
Appendix EUROPE CYPRUS 8009 4000 only from landline http://www.samsung.com (+30) 210 6897691 from mobile and land line CZECH 800 - SAMSUNG (800-726786) http://www.samsung.com Samsung Electronics Czech and Slovak, s.r.o., Oasis Florenc, Sokolovská 394/17, 180 00, Praha 8 till 8.2.2013 . From 8.2.2013: Samsung Electronics Czech and Slovak, s.r.o. V Parku 2343/24, 148 00 - Praha 4 DENMARK 70 70 19 70 http://www.samsung.com EIRE 0818 717100 http://www.samsung.com ESTONIA 800-7267 http://www.
Appendix EUROPE PORTUGAL 808 20 - SAMSUNG (808 20 7267) http://www.samsung.com ROMANIA 08008 SAMSUNG (08008 726 7864) http://www.samsung.com TOLL FREE No. SERBIA +381 11 321 6899 http://www.samsung.com (old number still active 0700 7267864) SLOVAKIA 0800 - SAMSUNG (0800-726 786) http://www.samsung.com SPAIN 902 - 1 - SAMSUNG (902 172 678) http://www.samsung.com SWEDEN 0771 726 7864 (SAMSUNG) http://www.samsung.com SWITZERLAND 0848-SAMSUNG (7267864, CHF 0.08/min) http://www.samsung.
Appendix ASIA PACIFIC AUSTRALIA 1300 362 603 http://www.samsung.com CHINA 400-810-5858 http://www.samsung.com HONG KONG (852) 3698 - 4698 http://www.samsung.com/hk (Chinese) http://www.samsung.com/hk_en (English) INDIA 1800 3000 8282 1800 266 8282 http://www.samsung.com/in INDONESIA 0800-112-8888 021-5699-7777 http://www.samsung.com/id JAPAN 0120-327-527 http://www.samsung.com MALAYSIA 1800-88-9999 http://www.samsung.com/my NEW ZEALAND 0800 SAMSUNG (0800 726 786) http://www.samsung.
Appendix MENA KUWAIT 183-2255 (183-CALL) http://www.samsung.com/ae (English) http://www.samsung.com/ae_ar (Arabic) MOROCCO 080 100 2255 http://www.samsung.com OMAN 800-SAMSUNG (726-7864) http://www.samsung.com/ae (English) http://www.samsung.com/ae_ar (Arabic) QATAR 800-2255 (800-CALL) http://www.samsung.com/ae (English) http://www.samsung.com/ae_ar (Arabic) SAUDI ARABIA 9200-21230 http://www.samsung.com/sa (Arabic) SYRIA 18252273 http://www.samsung.
Appendix Responsibility for the Pay Service (Cost to Customers) When the service is requested, in spite of in warranty, we may charge you for a visit from a service technician in the following cases. Not a product defect Cleaning of the product, Adjustment, Explanation, Re-installation and etc. If a service technician gives instructions on how to use product or simply adjusts options without disassembling product. If a defect is caused by external environmental factors.
Appendix Optimum Picture Quality and Afterimage Burn-in Prevention Optimum Picture Quality To enjoy the optimum picture quality, go to Control Panel on your PC and adjust the resolution and refresh rate as follows. The picture quality of TFT-LEDs may degrade if the optimum resolution is not selected.
Appendix Prevention of Afterimage Burn-in What is afterimage burn-in? Afterimage burn-in should not occur when the LCD panel is operating normally. Normal operation refers to a continuously changing video pattern. If the LCD panel displays a fixed pattern for an extended period of time (more than 12 hours), a slight voltage difference may occur between the electrodes in pixels that control the liquid crystals.
Appendix Regular colour Change Type 1 Type 2 FLIGHT TIME FLIGHT TIME OZ348 20:30 OZ348 20:30 UA102 21:10 UA102 21:10 Use 2 colours Switch between 2 colours every 30 minutes as shown above. Avoid combinations of a text colour and background colour of contrasting brightness. Avoid using grey as it may contribute to afterimage burn-in. Avoid using colours of contrasting brightness (black and white; grey).
Appendix Correct Disposal Correct Disposal of This Product (Waste Electrical & Electronic Equipment) (Applicable in countries with separate collection systems) This marking on the product, accessories or literature indicates that the product and its electronic accessories (e.g. charger, headset, USB cable) should not be disposed of with other household waste at the end of their working life.
Appendix Terminology Dot Pitch The product and screen consist of red, green and blue dots. A shorter distance between the dots produces a higher resolution. Dot pitch refers to the distance between the shortest distance between dots of the same colour. Dot pitch is measured in millimeters. Vertical Frequency The product displays a single image many times per second (like a fluorescent light that flickers) to display an image for a viewer to see.
Appendix Multiple Display Control (MDC) MDC (Multiple Display Control) is an application that allows multiple display devices to be controlled simultaneously using a PC. Communication between a PC and monitor takes place using RS232C (serial data transmission) and RJ45 (LAN) cables. DVD (Digital Versatile Disc) DVD refers to a CD-sized mass storage disk where you can save multimedia (audio, video or game) applications using MPEG-2 video compression technology.
Index B Port 30 Batteries 33 Problem report 267 C R Contact SAMSUNG WORLD WIDE 284 Remote Control 32 Content Manager 214, 254 Reset All 166 Contents Home 168 Responsibility for the Pay Service (Cost to Customers) 290 Correct Disposal 294 Custom settings screen 117 S E Edit Name 170 Screen Adjustment 119 Screen Position 157 Settings 216, 256, 264 Sleep Timer 146 I Software Update 167 Items sold separately 26 Source AutoSwitch Settings 158 Standard 117 L Local Schedule Manager 201, 236 T
Index WPS(PBC) 141 Index 298