Contact SAMSUNG WORLD-WIDE If you have any questions or comments relating to Samsung products, please contact the SAMSUNG customer care center. Contacte con SAMSUNG WORLD WIDE Si tiene alguna pregunta o comentario referente a nuestros productos, por favor contacte con nuestro Servicio de Atención al Cliente Country Customer Care Center Web Site CANADA 1-800-SAMSUNG (7267864) www.samsung.com/ca U.S.A 1-800-SAMSUNG (7267864) www.samsung.com Address Samsung Electronics Canada Inc.
Important Warranty Information Regarding Television Format Viewing Wide screen format PDP Displays (16:9, the aspect ratio of the screen width to height) are primarily designed to view wide screen format full-motion video. The images displayed on them should primarily be in the wide screen 16:9 ratio format, or expanded to fill the screen if your model offers this feature and the images are constantly moving.
User Instructions Screen Image retention Do not display a still image (such as on a video game) on the plasma display panel for more than several minutes as it can cause screen image retention. This image retention is also known as “screen burn”. To avoid such image retention, refer to page 23 of this manual to reduce the degree of brightness and contrast of the screen when displaying a still image. Altitude The PDP can only operate normally at heights under 6500ft.
English Contents General Information List of Features...................................................................5 Accessories.........................................................................5 Viewing the Control Panel...................................................6 Viewing the Connection Panel............................................7 Remote Control...................................................................8 Installing Batteries in the Remote Control.........................
General Information List of Features • • • • • Adjustable picture settings that can be stored in the TV’s memory. Automatic timer to turn the TV on and off. A special sleep timer. V-Chip function. Excellent Digital Interface & Networking : With a built-in HD digital tuner, non-subscription HD broadcasts can be viewed with no Set-Top Box needed. • Excellent Picture Quality - DNIe technology provides life-like clear images. • SRS TruSurround XT - SRS TruSurround XT provides a virtual Dolby surround system.
Viewing the Control Panel Buttons on the Lower-Right Part of the Panel The buttons on the lower-right panel control your TV’s basic features, including the on-screen menu. To use the more advanced features, you must use the remote control. ➢ The product color and shape may vary depending on the model. 1 SOURCE Toggles between all the available input sources (TV, AV1, AV2, S-Video, Component1, Component2, PC, HDMI1, HDMI2).
Viewing the Connection Panel Rear Panel Jacks Use the rear panel jacks to connect A/V components that will be connected continuously, such as VCR or DVD players. For more information on connecting equipment, see pages 9-15. The product color and shape may vary depending on the model. 1 POWER IN Connect the supplied power cord. 2 DIGITAL AUDIO OUT (OPTICAL) Connect to a Digital Audio component. 3 AUDIO OUT (R/L) Audio outputs to external devices.
Remote Control You can use the remote control up to a distance of about 23 feet from the TV. 1 POWER # SOURCE Turns the TV on and off. Press to display all of the available video sources. 2 TV $ PRE-CH Selects the TV mode directly. Tunes to the previous channel. 3 NUMERIC BUTTONS Press to directly select a channel. 4 – W.LINK W.LINK Press to select additional channels (digital and analog) being broadcast by the same station.
Installing Batteries in the Remote Control 1 Lift the cover at the back of the remote control upward as shown in the figure. 2 Install two AAA size batteries. ➢ Make sure to match the “+” and “–” ends of the batteries with the diagram inside the compartment. ➢ Do not mix battery types, i.e. alkaline and manganese. 3 Close the cover as shown in the figure. ➢ Remove the batteries and store them in a cool, dry place if you won’t be using the remote control for a long time.
Connecting Cable TV To connect to a cable TV system, follow the instructions below. Cable without a Cable Box 1 Plug the incoming cable into the ANT IN terminal on the back of the TV. ➢ Because this TV is cable-ready, you do not need a cable box to view unscrambled cable channels. ANT IN Connecting to a Cable Box that Descrambles All Channels 1 Find the cable that is connected to the ANT OUT terminal on your cable box. ➢ This terminal might be labeled “ANT OUT”, “VHF OUT” or simply, “OUT”.
Connecting a DVD Player or Cable Box / Satellite receiver (Set-Top Box) via HDMI This connection can only be made if there is an HDMI Output jack on the external device. This connection will provide the highest quality picture. 1 Connect an HDMI Cable between the HDMI IN(1 or 2) jack on the TV and the HDMI jack on the DVD Player or Cable Box / Satellite receiver (Set-Top Box).
Connecting a DVD Player or Cable Box / Satellite receiver (Set-Top Box) via Component cables The rear panel jacks on your TV make it easy to connect a DVD Player or Cable Box / Satellite receiver (Set-Top Box) to your TV. 1 Connect Component Cables between the COMPONENT IN (1 or 2) [Y, PB, PR] jacks on the TV and the COMPONENT [Y, PB, PR] jacks on the DVD Player or Cable Box / Satellite receiver(Set-Top Box).
Connecting a VCR Video Connection These instructions assume that you have already connected your TV to an antenna or a cable TV system (according to the instructions on pages ~10). Skip step 1 if you have not yet connected to an antenna or a cable system. 1 Unplug the cable or antenna from the back of the TV. Connect the cable or antenna to the ANT IN terminal on the back of the VCR. Connect an Antenna Cable between the ANT OUT terminal on the VCR and the ANT IN terminal on the TV.
Connecting a Digital Audio System The rear panel jacks on your TV make it easy to connect a Digital Audio System(Home theater/Receiver) to your TV. 1 Connect an Optical Cable between the DIGITAL AUDIO OUT (OPTICAL) jacks on the TV and the Digital Audio Input (OPTICAL) jacks on the Digital Audio System. When a Digital Audio System is connected to the DIGITAL AUDIO OUT (OPTICAL) terminal: Decrease the volume of the TV, and adjust the volume level with the system’s volume control.
Connecting a PC Using the D-Sub Cable 1 Connect a D-Sub Cable between PC IN [PC] jack on the TV and the PC output jack on your computer. Connect a PC Audio Cable between PC IN [AUDIO] jack on the TV and the Audio Out jack of the sound card on your computer. Using the D-Sub Cable TV Rear Panel PC PC Audio Cable (Not supplied) 1 D-Sub Cable (Not supplied) Using the HDMI/DVI Cable 1 Connect a HDMI/DVI cable between the HDMI IN 2 jack on the TV and the PC output jack on your computer. Connect a 3.
Operation Turning the TV On and Off Press the POWER button on the remote control. You can also use the POWER button on the TV. ➢ It may take a while before you see a full picture. Plug & Play Feature The first time you turn on your new TV, choose your basic settings for language, input source and channels, and time of day using the plug and play feature. The TV will store these settings in memory.
5 The TV will begin memorizing all of the available channels. ➢ To stop the search before it has finished, press the ENTER button with Stop selected. After all the available channels are stored, the TV starts to remove scrambled channels(see page37). The Auto program menu then reappears. Press the ENTER button when channel memorization is complete. Clock Mode menu is automatically displayed. Auto Program Auto Program in Progress.
If you want to reset this feature... 1 Press the MENU button to display the menu. Press the ▲ or ▼ button to select Setup, then press the ENTER button. Setup TV Plug & Play ► Language : English ► Time ► V-Chip ► Caption ► External Settings ► Entertainment : Off ► ▼ More Move Enter Return 2 Press the ENTER button to select Plug & Play. For further details on setting up options, refer to the pages 16~17. ➢ The Plug & Play feature is only available in the TV.
Adjusting the Volume Using the Volume Buttons 1 Press the VOL or VOL W.LINK button to increase or decrease the volume. W.LINK Using the Mute Button At any time, you can cut off the sound using the MUTE button. 1 Press MUTE and the sound cuts off. Mute will displayed on the screen. 2 To turn mute off, press the MUTE button again, or simply press the VOL VOL button. W.LINK or W.LINK Using the TOOLS Button You can use the TOOLS button to select your frequently used functions quickly and easily.
Viewing the Menus 1 With the power on, press the MENU button. The main menu appears on the screen. Its left side has five icons: Picture, Sound, Channel, Setup, Input. TV Picture Mode Cell Light Contrast Brightness Sharpness Color Tint(G/R) G 50 ▼ More 2 Press the ▲ or ▼ button to select one of the icons. Then press the ENTER button to access the icon’s sub-menu. : Standard Move Enter ► 7 95 45 50 50 R 50 Exit 3 Press the EXIT button to exit.
Storing Channels in Memory (Automatic Method) 1 Press the MENU button to display the menu. Press the ▲ or ▼ button to select Channel, then press the ENTER button. TV Channel Antenna : Air Auto Program Clear Scrambled Channel Channel List Name Fine Tune Signal Strength 2 Press the ▲ or ▼ button to select Auto Program, then press the ENTER button. Move 3 Press the ▲ or ▼ button to select the antenna connection, then press the ENTER button. ➢ Air: Air antenna signal.
To Select the Source Use to select TV or other external input sources such as DVD players or Set-top/Cable boxes connected to the TV. Use to select the input source of your choice. 1 Press the MENU button to display the menu. Press the ▲ or ▼ button to select Input, then press the ENTER button. TV Input Source List : TV Edit Name Move 2 Press the ENTER button to select Source List. Press the ▲ or ▼ button to select signal source, then press the ENTER button.
Picture Control Changing the Picture Standard You can select the type of picture which best corresponds to your viewing requirements. 1 Press the MENU button to display the menu. Press the ENTER button to select Picture. TV 2 Press the ENTER button to select Mode. Press the ▲ or ▼ button to select Dynamic, Standard, or Movie. Press the ENTER button. • Dynamic: Select the picture for high-definition in a bright room. • Standard: Select the picture for the optimum display in a normal environment.
Adjusting the Detailed Settings Samsung’s new TVs allow you to make even more precise picture settings than previous models. See below to adjust detailed picture settings. Activating Detailed Settings 1 Press the MENU button to display the menu. Press the ENTER button to select Picture. TV 2 Press the ENTER button to select Mode. Press the ▲ or ▼ button to select Standard or Movie, then press the ENTER button. ➢ Detailed Settings is available in Standard or Movie mode.
Changing the Color Space Color space is a color matrix composed of red, green and blue colors. Select your favorite color space to experience the most natural color. TV Detailed Settings Black Adjust : Off Dynamic Contrast : Medium Gamma :0 Color Space White Balance Flesh Tone Edge Enhancement : On 10 Press the ▲ or ▼ button to select Color Space, then press the ENTER button. 11 Press the ENTER button again to select Color Space. 12 Press the ▲ or ▼ button to select Auto, Native or Custom.
Flesh Tone You can emphasize the pink flesh tone in the picture. 20 Press the ▲ or ▼ button to select Flesh Tone, then press the ENTER button. TV Detailed Settings Black Adjust : Off Dynamic Contrast : Off Gamma :0 Color Space White Balance Flesh Tone Edge Enhancement : On 21 Press the ◄ or ► button to decrease or increase the value. Press the ENTER button. ➢ Changing the adjustment value will refresh the adjusted screen.
Changing the Screen Size Occasionally, you may want to change the size of the image on your screen. Your TV comes with six screen size options, each designed to work best with specific types of video input. Your cable box or satellite receiver may have its own set of screen sizes as well. In general, though, you should view the TV in 16:9 mode as much as possible. 1 Follow the Activating Picture Options instructions numbers 1 and 2.
16:9 Sets the picture to 16:9 wide mode. Zoom1 The screen size when Wide screen is vertically enlarged. Zoom2 The screen size when the Zoom1 screen is vertically enlarged. Wide Fit Enlarges the aspect ratio of the picture to fit the entire screen. 4:3 Sets the picture to 4:3 normal mode. Just Scan Use the function to see the full image without any cutoff when HDMI (720p/1080i), Component (1080i) or DTV (1080i) signals are input.
DNIe (Digital Natural Image engine) This TV includes the DNIe function to provide high visual quality. If you set DNIe to on, you can view the screen with the DNIe feature activated. 1 TV Follow the Activating Picture Options instructions numbers 1 and 2. (Refer to page 26) 2 Press the ▲ or ▼ button to select DNIe, then press the ENTER button. 3 Press the ▲ or ▼ button to select On or Off or then press the ENTER button. • Off: Switches off the DNIe mode. • On: Switches on the DNIe mode.
Setting the Blue Only Mode This function is for AV device measurement experts. This function displays the blue signal only by removing the red and green signals from the video signal so as to provide a Blue Filter effect that is used to adjust the Color and Tint of video equipment such as DVD players, Home Theaters, etc.
Preventing Screen Burn-in To reduce the possibility of screen burn, this unit is equipped with screen burn prevention technology. This technology enables you to set picture movement up/down (Vertical Line) and side to side (Horizontal Dot). The Time setting allows you to program the time between movement of the picture in minutes. 1 Follow the Activating Picture Options instructions numbers 1 and 2.
Sound Control Changing the Sound Standard You can select the sound mode to best suit the programming you’re watching. 1 Press the MENU button to display the menu. Press the ▲ or ▼ button to select Sound, then press the ENTER button. TV Sound Mode : Custom Standard Equalizer Music Movie SRS TruSurround XT : Off Multi-Track Options Speech Custom Auto Volume : Off TV Speaker : Off 2 Press the ENTER button to select Mode.
Setting the TruSurround XT TruSurround XT is a patented SRS technology that solves the problem of playing 5.1 multichannel content over two-speakers. TruSurround delivers a compelling, virtual surround sound experience through any two-speaker playback system, including internal television speakers. It is fully compatible with all multi channel formats. 1 Press the MENU button to display the menu. Press the ▲ or ▼ button to select Sound, then press the ENTER button.
Choosing a Multi-Channel Sound (MTS) Track - Analog Depending on the particular program being broadcast, you can listen to Mono, Stereo or SAP. Multi-Track Sound 1 Press the MENU button to display the menu. Press the ▲ or ▼ button to select Sound, then press the ENTER button. TV Sound Mode : Custom Equalizer SRS TruSurround XT : Off Multi-Track Options Auto Volume : Off TV Speaker : Off 2 Press the ▲ or ▼ button to select Multi-Track Options, then press the ENTER button.
Setting the TV Speakers On/Off Sound output from the TV speakers is muted. 1 Press the MENU button to display the menu. Press the ▲ or ▼ button to select Sound, then press the ENTER button. TV Sound Mode : Custom Equalizer SRS TruSurround XT : Off Multi-Track Options Auto Volume : Off TV Speaker : Off 2 Press the ▲ or ▼ button to select TV Speaker, then press the ENTER button. Move 3 Press the ▲ or ▼ button to select Off or On, then press the ENTER button. Press the EXIT button to exit.
Channel Control Selecting the Antenna 1 Press the MENU button to display the menu. Press the ▲ or ▼ button to select Channel, then press the ENTER button. TV Channel Air Antenna : Air Auto Program Cable Clear Scrambled Channel Channel List Name Fine Tune Signal Strength 2 Press the ENTER button to select Antenna. Press the ▲ or ▼ button to select Air or Cable, then press the ENTER button. Press the EXIT button to exit.
Adding and Erasing Channels You can add or delete a channel to display the channels you want. 1 Press the MENU button to display the menu. Press the ▲ or ▼ button to select Channel, then press the ENTER button. TV Channel Antenna : Air Auto Program Clear Scrambled Channel Channel List Name Fine Tune Signal Strength 2 Press the ▲ or ▼ button to select Channel List, then press the ENTER button. Move 3 Press the ▲ or ▼ button to select Added, then press the ENTER button.
Viewing the Channel Lists You can display a list of all channels, added channels or your favorite channels. 1 TV Channel Antenna : Air Auto Program Clear Scrambled Channel Channel List Name Fine Tune Signal Strength Press the MENU button to display the menu. Press the ▲ or ▼ button to select Channel, then press the ENTER button. 2 Press the ▲ or ▼ button to select Channel List, then press the ENTER button.
5 Press the ▲ or ▼ button to select Favorite, then press the ENTER button. The “ ” symbol will be highlighted and the channel will be set as a Favorite. To cancel your Favorite channel selection, press the ENTER button until the “ ” symbol disappears. Press the EXIT button to exit. ➢ Only memorized channels can be set as favorite channels. ➢ All favorite channels will be shown on the Favorite menu.
Fine Tuning Analog Channels Use fine tuning to manually adjust a particular channel for optimal reception. 1 Press the MENU button to display the menu. Press the ▲ or ▼ button to select Channel, then press the ENTER button. TV Channel Antenna : Air Auto Program Clear Scrambled Channel Channel List Name Fine Tune Signal Strength Move 2 Press the ▲ or ▼ button to select Fine Tune, then press the ENTER button.
PC Display Using Your TV as a Computer (PC) Display Setting Up Your PC Software (Based on Windows XP) The Windows display-settings for a typical computer are shown below. The actual screens on your PC will probably be different, depending upon your particular version of Windows and your particular video card. However, even if your actual screens look different, the same basic set-up information will apply in almost all cases. (If not, contact your computer or Video Card manufacturer.
• The interlace mode is not supported. • The TV operates abnormally if a non-standard video format is selected. • The table above conforms to IBM/VESA regulations and is based on using the Analog Input. • “ ✔ ” mark means that this mode is supported. ➢ • For the PN42A410C1D, PC text quality is optimum in VESA mode (1024 x 768@60Hz). • F or the PN50A410C1D, PC text quality is optimum in VESA mode (1360 x 768@60Hz).
2 Press the ENTER button to select Image Lock. TV Image Lock Coarse Fine 3 Press the ▲ or ▼ button to select Coarse or Fine, then press the ENTER button. Press the ◄ or ► button to adjust the screen quality, then press the ENTER button. Press the EXIT button to exit. ➢ Vertical stripes may appear or the picture may be blurry. Move Enter 50 49 Return Coarse 50 Move Adjust Return Changing the Screen Position Adjust the PC’s screen positioning if it does not fit the TV Screen.
Time Setting Setting the Time Setting the clock is necessary in order to use the various timer features of the TV. Also, you can check the time while watching the TV. (Just press the INFO button.) Option 1: Setting the Clock Manually 1 Press the MENU button to display the menu. Press the ▲ or ▼ button to select Setup, then press the ENTER button. Press the ▲ or ▼ button to select Time, then press the ENTER button. 2 Press the ENTER button to select Clock.
Option 2: Setting the Clock Automatically The Clock can be set automatically if you are receiving a digital signal. 1 Press the MENU button to display the menu. Press the ▲ or ▼ button to select Setup, then press the ENTER button. Press the ▲ or ▼ button to select Time, then press the ENTER button. 2 Press the ENTER button to select Clock.
2 Three different On/Off Timer Settings can be made. Press the ▲ or ▼ button to select Timer1, Timer2,or Timer3, then press the ENTER button. The timer menu is displayed. Press the ▲ or ▼ button to adjust hour, then press the ► button to move to the next step. Set other items using the same method as above. TV Time 1/1/2008 5:30 am Clock Sleep Timer : Off Timer1 : Inactivated Timer2 : Inactivated Timer3 : Inactivated 3 Press the ◄ or ► button to select the desired item below.
Function Description Selecting a Menu Language Setting the clock is necessary in order to use the various timer features of the TV. Also, you can check the time while watching the TV. (Just press the INFO button.) 1 Press the MENU button to display the menu. Press the ▲ or ▼ button to select Setup, then press the ENTER button. Press the ▲ or ▼ button to select Language, then press the ENTER button.
4 Press the ▲ or ▼ button to select Caption Mode, then press the ENTER button. Press the ▲ or ▼ button to select submenu (Default, Service1~Service6, CC1~CC4 or Text1~Text4) you want, then press the ENTER button. ➢ Service1~6 in digital caption mode may not be available depending on the broadcast. ➢ Digital Caption Option are available only when Default, Service1~Service6 can be selected in Caption Mode.
Viewing Closed Captions (On-Screen Text Messages) - Analog The Analog Caption function operates in either analog TV channel mode or when a signal is supplied from an external device. (Depending on the broadcasting signal, the Analog Caption function may operate on digital channels.) 1 Press the MENU button to display the menu. Setup TV Press the ▲ or ▼ button to select Setup, then press the ENTER button.
Adjusting the TV On/Off Melody Sound The TV power on/off melody sound volume can be adjusted. 1 Press the MENU button to display the menu. Press the ▲ or ▼ button to select Setup, then press the ENTER button. Plug & Play ► Language : English ► Time ► V-Chip ► Caption ► External Settings ► Entertainment : Off ► ▼ More Move Enter Return 2 Press the ▲ or ▼ button to select External Settings, then press the ENTER button. 3 Press the ENTER button to select Melody.
Setting the Entertainment mode The Entertainment mode enables you to select the optimal display and sound for sports, cinema and games. 1 Press the MENU button to display the menu. Press the ▲ or ▼ button to select Setup, then press the ENTER button. 2 Press the ▲ or ▼ button to select Entertainment, then press the ENTER button. 3 Press the ▲ or ▼ button to select Off, Sports, Cinema or Game, then press the ENTER button.
Upgrading the Software Samsung may offer upgrades for your TV’s firmware in the future. Please contact the Samsung call center at 1-800-SAMSUNG to receive information about downloading upgrades and using a USB drive. Upgrades will be possible by connecting a USB drive to the USB port. 1 Insert a USB drive containing the firmware upgrade into the USB Upgrade Port on the rear of the TV. TV Rear Panel ($-) ). USB Drive 2 Press the MENU button to display the menu.
Using the V-Chip U.S.A Only This product is covered by the following U.S. patents : US4,930,158 US4,930,160 The V-Chip feature automatically locks out programs that are deemed inappropriate for children. The user must enter a PIN (personal ID number) before any of the V-Chip restrictions are set up or changed. ➢ V-Chip function is not available in HDMI, Component or PC mode. Setting Up Your Personal ID Number (PIN) 1 Press the MENU button to display the menu.
How to Enable/Disable the V-Chip 1 Press the MENU button to display the menu. Press the ▲ or ▼ button to select Setup, then press the ENTER button. 2 Press the ▲ or ▼ button to select V-Chip, then press the ENTER button. The message Enter PIN will appear. Enter your 4 digit PIN number. TV V-Chip Enter PIN * * 0 .. 9 3 The V-Chip screen will appear. To enable the V-Chip feature, press the ENTER button so that the V-Chip Lock field is On. (Pressing the ▲ or ▼ button will alternate between On and Off.
4 The TV Parental Guidelines screen will appear. Press the ▲ or ▼ button to select one of the six aged based categories: • TV-Y: All children. The themes and elements in this program are specifically designed for a very young audience, including children from ages two to six. • TV-Y7: Directed to older children. The themes and elements in this program may include mild physical or comedic violence, or may frighten children under the age of seven. • TV-G: General audience.
How to Set up Restrictions Using “MPAA Ratings” (G, PG, PG-13, R, NC-17, X, NR ) The MPAA rating system uses the Motion Picture Association of America (MPAA) system, and its main application is for movies. When the V-Chip lock is on, the TV will automatically block any programs that are coded with objectionable ratings (either MPAA or TV-Ratings). 1 Press the MENU button to display the menu. Press the ▲ or ▼ button to select Setup, then press the ENTER button.
How to Set up Restrictions Using “Canadian English” (for Canada Models) 1 Press the MENU button to display the menu. Press the ▲ or ▼ button to select Setup, then press the ENTER button. 2 Press the ▲ or ▼ button to select V-Chip, then press the ENTER button. The message Enter PIN will appear. Enter your 4 digit PIN number. Setup TV Plug & Play ► Language : English ► Time ► V-Chip ► Caption ► External Settings ► Entertainment : Off ► ▼ More Move Return Enter TV V-Chip Enter PIN * * 0 ..
How to Set up Restrictions Using “Canadian French” (for Canada Models) 1 Press the MENU button to display the menu. Press the ▲ or ▼ button to select Setup, then press the ENTER button. 2 Press the ▲ or ▼ button to select V-Chip, then press the ENTER button. The message Enter PIN will appear. Enter your 4 digit PIN number. Setup TV Plug & Play ► Language : English ► Time ► V-Chip ► Caption ► External Settings ► Entertainment : Off ► ▼ More Return Move Enter TV V-Chip Enter PIN * * 0 ..
Using the V-Chip for Digital channels Parental restriction information can be used while watching DTV channels. 1 Press the MENU button to display the menu. Press the ▲ or ▼ button to select Setup, then press the ENTER button. 2 Press the ▲ or ▼ button to select V-Chip, then press the ENTER button. The message Enter PIN will appear. Enter your 4 digit PIN number.
How to Reset the TV after the V-Chip Blocks a Channel (“Emergency Escape”) If the TV is tuned to a restricted channel, the V-Chip will block it. The screen will go blank and the following message will appear: 1 W.LINK Enter your PIN. To resume normal viewing, tune to a different channel using CH or CH button. Under certain conditions (depending on the rating of the local TV W.LINK programs) the V-Chip might lock out all the channels.
Appendix 경고 주의 Securing the TV to the Wall Pulling, pushing, or climbing on the TV may cause the TV to fall. In particular, ensure your children do not 경고 hang over or destabilize the TV; doing so may cause the TV to tip over, causing serious injuries or death. 주의 Follow all safety precautions provided on the included Safety Flyer. For added stability, install the anti-fall device for safety purposes, as follows.
Troubleshooting If the TV seems to have a problem, first try this list of possible problems and solutions. If none of these troubleshooting tips apply, call Samsung customer service at 1-800-SAMSUNG. Problem Poor picture quality. Poor sound quality. No picture or sound. No sound or sound is too low at maximum volume. Picture rolls vertically. The TV operates erratically. The TV won’t turn on. Remote control malfunctions Possible Solution Try another channel. Adjust the antenna. Check all wire connections.
Wall- mount adjustment (Sold separately) Once the wall mount is installed, the position of your TV can be easily adjusted. TV Rear Panel Auto Wall-Mount EX-LINK Cable (Not supplied) Entering the menu 1 Press the ▲, ▼, ◄ or ► button on your remote control. ➢ The Wall Mount Adjustment screen is displayed.
Moving to the remembered position ➢ ➢ Position Adjust ► Wall-Mount Adjustment ► ► ➢ ➢ Complete Step 1 of Entering the menu. Pressing a Color (Red, Green, Yellow) button moves the auto wall mount to the saved position. ➢ You can move the wall mount to one of the 3 pre-set positions by pressing the Red (Position 1), Green (Position 2) or Yellow (Position 3) buttons. ➢ If you adjust the positon after moving to a pre-set position, the position display will disappear.
Wall Mount Kit Specifications (VESA) Install your wall mount on a solid wall perpendicular to the floor. When attaching to other building materials, please contact your nearest dealer. If installed on a ceiling or slanted wall, it may fall and result in severe personal injury. Product Family inch VESA Spec.
How to assemble the Stand-Base Using the 6 screws for securing the stand base and the monitor, firmly attach the monitor to the stand base. (The exterior of the set may be different than the picture.) When mounting your TV on a wall, install the cover (1) on the stand-base using two screws. Warning Firmly secure the stand to the TV before moving it, as the stand may fall and could cause serious injury. ➢ Two or more people should carry the TV.
Dimensions (PN42A410C1D) TOP VIEW FRONT VIEW JACK PANEL DETAIL 3.7”H x 7.2”W SIDE VIEW REAR VIEW NOTE: All drawings not necessarily to scale. Some dimensions are subject to change without prior notice. Refer to dimensions on each unit prior to performing any carpentry. Not responsible for typographical or printed errors. © 2008 Samsung Electronics America, Inc. English - 67 BN68-01428A_01531A-00Eng_61-67.
Dimensions (PN50A410C1D) TOP VIEW FRONT VIEW JACK PANEL DETAIL 3.7”H x 7.2”W SIDE VIEW REAR VIEW NOTE: All drawings not necessarily to scale. Some dimensions are subject to change without prior notice. Refer to dimensions on each unit prior to performing any carpentry. Not responsible for typographical or printed errors. © 2008 Samsung Electronics America, Inc. English - 68 BN68-01428A_01531A-00Eng_61-67.
This page is intentionally left blank. BN68-01428A_01531A-00Eng_61-67.
BN68-01428A_01531A-00Eng_61-67.
Información importante sobre la garantía relativa al formato de visualización del televisor Las pantallas PDP con formato de pantalla panorámica (16:9, la relación de aspecto ancho:alto de la pantalla) están diseñadas principalmente para visualizar vídeos de movimiento de formato panorámico. En estas pantallas debe ver las imágenes en el formato 16:9 de pantalla panorámica o ampliadas para llenar la pantalla si el modelo tiene esta opción, y en movimiento constante.
Instrucciones para el usuario Retención de imágenes en la pantalla No deje imágenes fijas visibles (como las de un videojuego) en el panel de la pantalla de plasma durante mucho tiempo, ya que se podría producir la retención de la imagen en la misma. Este fenómeno de retención de imágenes también se denomina “quemadura de pantalla”. Para evitar dicha retención de la imagen, consulte la página 31 de este manual para reducir el grado de brillo y contraste de la pantalla al mostrar una imagen fija.
Español Índice Información general Control de los canales ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ Características...............................................................5 Accesorios.....................................................................5 Aspecto general del panel de control............................. 6 Aspecto general del panel de conexiones..................... 7 Mando a distancia..........................................................8 Instalación de las pilas en el mando a distancia....
Información general Características • • • • • Valores ajustables de la imagen que se pueden almacenar en la memoria del televisor. Temporizador automático para encender o apagar el televisor. Temporizador de desconexión especial. Función V-chip. Excelente interfaz digital y capacidad de trabajo en red: El sintonizador digital HD incorporado permite ver las emisiones HD que no exigen una suscripción sin que sea necesario disponer de un decodificador. • Calidad excelente de la imagen.
Aspecto general del panel de control Botones de la parte inferior derecha del panel Los botones del panel inferior derecho controlan las funciones básicas del televisor, incluido el menú en pantalla. Para utilizar las funciones más avanzadas debe usarse el mando a distancia. ➢ El color y la forma del producto pueden variar según el modelo. 1 SOURCE Cambia entre todas las fuentes de entrada disponibles (TV, AV1, AV2, S-Video1, S-Video2, Componente1, Componente2, PC, HDMI1, HDMI2).
Aspecto general del panel de conexiones Tomas del panel posterior Use las tomas del panel posterior para conectar componentes de A/V que estarán disponibles permanentemente, como un vídeo o un reproductor de DVD. Si desea más información sobre la conexión del equipo, consulte las páginas 9-15. El color y la forma del producto pueden variar, según el modelo. 1 Botón de encendido Conexión para el cable de alimentación suministrado. 2 DIGITAL AUDIO OUT (OPTICAL) Se conecta al componente de audio digital.
Mando a distancia Puede utilizar el mando a una distancia de hasta 7 metros del televisor. 1 POWER # SOURCE Enciende y apaga el televisor. Pulse este botón para ver y seleccionar las fuentes de vídeo disponibles. 2 TV Selecciona directamente el modo TV. $ PRE-CH Sintoniza el canal anterior. 3 BOTONES NUMÉRICOS Se utilizan para cambiar el canal. 4 – W.LInK W.LInK W.LInK Pulse este botón para seleccionar canales adicionales (digitales y analógicos) emitidos por la misma emisora.
Instalación de las pilas en el mando a distancia 1 Levante la tapa de la parte posterior del mando a distancia, como se muestra en la ilustración. 2 Instale dos baterías de tamaño AAA. ➢ Asegúrese de que los extremos “+” y “-” de las pilas concuerdan con el diagrama del interior del compartimiento. ➢ No mezcle distintos tipos de pilas; por ejemplo, alcalinas y de manganeso. 3 Cierre la tapa, como se muestra en la ilustración.
Conexión de TV por cable Para conectar a un sistema de TV por cable, siga estas instrucciones. Cable sin decodificador de cable 1 Enchufe el cable de entrada en el terminal ANT IN en la parte posterior del televisor. ➢ Dado que el TV tiene previsto el uso de televisión por cable, no se necesita un decodificador para ver canales de cable no codificados. ANT IN Conexión al decodificador que decodifica todos los canales 1 ANT IN Busque el cable conectado al terminal ANT OUT del decodificador.
Conexión de un reproductor de DVD o receptores de televisión por cable/ satélite (decodificadores) a través de HDMI Esta conexión sólo se puede realizar si hay una toma de salida de HDMI en el dispositivo externo. Esta conexión proporciona una imagen de la mayor calidad. 1 Conecte un cable HDMI entre el terminal HDMI IN (1 o 2) del televisor y el terminal HDMI del reproductor de DVD o del receptor de televisión por cable/satélite (decodificador).
Conexión de un reproductor de DVD o receptores de televisión por cable/ satélite (decodificadores) a través de los cables de componentes Las tomas del panel posterior del televisor facilitan la conexión al televisor de un reproductor de DVD/receptor de cable/satélite (decodificador).
Conexión de un aparato de vídeo Conexión de vídeo En estas instrucciones se asume que ya ha conectado el TV a una antena o a un sistema de TV por cable (de acuerdo con las instrucciones de las páginas 9 y 10). Ignore el paso 1 si aún no ha conectado una antena o un sistema de cable. 1 Desenchufe el cable o la antena de la parte posterior del TV. 2 Conecte el cable o la antena al terminal ANT IN en la parte posterior del aparato de vídeo.
Conexión de un sistema de audio digital Las tomas del panel posterior del televisor facilitan la conexión de un sistema de audio digital (Home Cinema/ Receptor) al televisor. 1 Conecte un cable óptico entre el terminal DIGITAL AUDIO OUT (OPTICAL) del televisor y el terminal Digital Audio Input (OPTICAL) del sistema de audio digital.
Conexión a un PC Uso del cable D-Sub 1 Conecte un cable D-Sub entre el terminal PC IN [PC] del televisor y el terminal de salida PC del ordenador. 2 Conecte un cable de audio PC entre el terminal PC IN [AUDIO] del televisor y el terminal de salida de audio de la tarjeta de sonido del ordenador.
Funcionamiento Encendido y apagado del televisor Pulse el botón POWER del mando a distancia. También puede usar el botón POWER del televisor. ➢ El televisor puede tardar unos segundos en encenderse. Función Plug & Play La primera vez que se enciende el nuevo televisor, se debe elegir la configuración básica del idioma, fuente de entrada y canales, y la hora del día por medio de la función plug and play. El televisor almacenará esta configuración en la memoria.
5 El televisor empezará a memorizar todos los canales disponibles. ➢ Para detener la búsqueda antes de que finalice, pulse el botón ENTER con Detener seleccionado. Una vez guardados todos los canales disponibles, el televisor inicia la eliminación de los canales codificados (ver página 37). A continuación, vuelve a mostrarse el menú Prog. Auto. Auto. Pulse el botón ENTER cuando se complete la memorización de canales. Se visualiza automáticamente el menú Modo Reloj. Prog. Auto La prog.
Si desea reiniciar esta función... 1 Pulse el botón MENU para ver el menú. Pulse los botones ▲ o ▼ para seleccionar Configuración y, a continuación, pulse el botón ENTER. 2 Pulse el botón ENTER para seleccionar Plug & Play. Si desea más detalles sobre las opciones de configuración, consulte las páginas 16 y 17. ➢ La función Plug & Play está disponible sólo en los modos TV y DTV.
Ajuste del volumen Utilización de los botones de volumen 1 Pulse los botones VOL W.LInK o VOL para subir o bajar el volumen. W.LInK Uso del botón Mute Puede interrumpir el sonido en cualquier momento pulsando el botón MUTE. 1 Pulse MUTE para interrumpir el sonido. Mute se visualizará en la pantalla. 2 Para recuperar el sonido, vuelva a pulsar el botón MUTE o pulse los botones VOL W.LInK o VOL . W.
Visualización de los menús 1 Con el aparato encendido, pulse el botón MENU. En la pantalla aparece el menú principal. En el lado izquierdo hay cinco iconos: Imagen, Sonido, Canal, Configuración, Entrada. TV Imagen Modo Luz de la celda Contraste Brillo Definición Color Tinte V 50 ▼ Más 2 Pulse losbotones ▲ o ▼ para seleccionar uno de los iconos. Después pulse el botón ENTER para acceder al submenú del icono.
Almacenamiento de los canales en la memoria (método automático). 1 Pulse el botón MENU para ver el menú. Pulse los botones ▲ o ▼ para seleccionar Canal y, a continuación, pulse el botón ENTER. TV Canal Antena : Aire Prog. Auto Borrar canal encriptado Lista de canales Nombre Sintonia Fina Intensidad señal 2 Pulse los botones ▲ o ▼ para seleccionar Prog. Auto y pulse el botón ENTER. Mover 3 Pulse los botones ▲ o ▼para seleccionar la conexión de la antena y pulse el botón ENTER.
Para seleccionar la fuente Úselo para seleccionar TV u otras fuentes de entrada externas como reproductores de DVD o decodificadores de cable y digital, conectados al televisor. Permite seleccionar la fuente de entrada que se prefiera. 1 Pulse el botón MENU para ver el menú. Pulse los botones ▲ o ▼ para seleccionar Entrada y, a continuación, pulse el botón ENTER. 2 Pulse el botón ENTER para seleccionar Lista de Origen.
Control de la imagen Utilización de los ajustes de imagen automáticos El televisor tiene tres ajustes de imagen automáticos (Dinámico, Normal y Cine) preajustados en fábrica. Puede activar cada uno seleccionándolo en el menú. 1 Pulse el botón MENU para ver el menú. Pulse el botón ENTER para seleccionar Imagen. TV Imagen Modo Luz de la celda Contraste Brillo Definición Color Tinte V 50 ▼ Más 2 Pulse el botón ENTER para seleccionar Modo.
Ajuste de la configuración detallada Los nuevos televisores Samsung permiten una configuración más precisa de la imagen que los modelos anteriores. Consulte más adelante cómo realizar una configuración detallada. Activación de la configuración detallada 1 TV Pulse el botón MENU para ver el menú. Pulse el botón ENTER para seleccionar Imagen. Imagen Más Configuración detallada Opciones de imagen Reiniciar : Aceptar ▲ 2 Pulse el botón ENTER para seleccionar Modo.
Cambio del espacio de color Espacio de color es una matriz de color compuesta por los colores rojo, verde y azul. Seleccione su gama favorita de color y disfrute de unos colores auténticamente naturales. 10 P ulse los botones ▲ o ▼ para seleccionar Espacio de color, y pulse el botón ENTER. 11 Pulse de nuevo el botón ENTER para seleccionar Espacio de color. 12 Pulse los botones ▲ o ▼ para seleccionar Auto, Nativo o Favorito. Pulse el botón ENTER.
Tono de la piel Permite acentuar el tono rosa en las imágenes. TV Configuración detallada Ajuste del negro : Apagado Contraste Dinám. : Apagado Gamma :0 Espacio de color Bal. blanco Tono Piel Mejora de perfiles : Encendido 20 Pulse los botones ▲ o ▼ para seleccionar Tono Piel, y pulse el botón ENTER. 21 Pulse los botones ◄ o ► para disminuir o aumentar el valor. Pulse el botón ENTER. ➢ El cambio del valor de ajuste renovará la pantalla ajustada.
Cambio del tamaño de la pantalla Es posible que alguna vez desee cambiar el tamaño de la imagen en la pantalla. El televisor se suministra con seis opciones de tamaño de la pantalla, cada una diseñada para que funcione lo mejor posible con tipos específicos de entrada de vídeo. Es posible que el receptor de cable o satélite tenga también su propia gama de tamaños de pantalla. Sin embargo, en general, debe ver el televisor en el modo 16:9 tanto como sea posible.
16:9 Establece la imagen en modo panorámico 16:9. Zoom1 Tamaño de pantalla cuando se amplía verticalmente el formato amplio. Zoom2 Tamaño de pantalla cuando se amplía verticalmente el formato Zoom1 (Zoom1). Ajuste ancho Amplía la relación de aspecto de la imagen para que se ajuste al ancho total de la pantalla. 4:3 Ajusta la imagen en modo normal 4:3.
DNIe (motor digital de imágenes naturales) Este televisor incluye la función DNIe con el fin de conseguir una gran calidad visual. Si ajusta DNIe en Encendido, podrá ver la pantalla con la función DNIe activada. 1 2 3 Siga las instrucciones 1 y 2 de Activación de las opciones de la imagen. (Consulte la página 26) Pulse los botones ▲ o ▼ para seleccionar DNIe y, a continuación, pulse el botón ENTER. Pulse los botones ▲ o ▼ para seleccionar Apagado o Encendido o pulse el botón ENTER.
Configuración de la función del modo sólo azul Esta función es para expertos en la medición de dispositivos AV. Esta función muestra sólo la señal azul ya que se eliminan las señales rojas y verdes de la señal de vídeo a fin de proporcionar un efecto de filtro azul que se usa para ajustar el color y el matiz de los equipos de vídeo, como reproductores DVD, sistemas Home Cinema, etc.
Prevención del desgaste de la pantalla Esta pantalla está equipada con tecnología de prevención para reducir la posibilidad de que se queme. Esta tecnología permite definir el movimiento de la imagen arriba o abajo (línea vertical) y de lado a lado (punto horizontal). El ajuste del tiempo permite programar intervalos temporales entre los movimientos de la imagen en minutos. TV Opciones de imagen Tono Color Tamaño Digital NR DNle N.
Control del sonido Cambio del estándar de sonido Puede seleccionar el modo de sonido que se ajuste al programa que se está viendo. 1 Pulse el botón MENU para ver el menú. Pulse los botones ▲ o ▼ para seleccionar Sonido y, a continuación, pulse el botón ENTER. TV Sonido Modo : Favoritos Normal Ecualizador Música Cine Trusurround SRS XT : Apagado Opc. Multi-track Diálogo Favorito Vol. Auto : Apagado Altavoz TV : Apagado 2 Pulse el botón ENTER para seleccionar Modo.
Ajuste de TruSurround XT TruSurround XT es una tecnología SRS patentada que solventa el problema de reproducir contenido multicanal 5.1 en dos altavoces. TruSurround proporciona una experiencia de sonido virtual convincente a través de cualquier sistema de reproducción con dos altavoces, incluso con los altavoces internos del televisor. Es totalmente compatible con todos los formatos multicanal. 1 Pulse el botón MENU para ver el menú.
Selección de una pista de sonido multicanal (MTS) - Analógico En función del programa concreto emitido, puede escuchar en mono o estéreo o escuchar un programa de audio secundario (SAP). Sonido multipistas 1 Pulse el botón MENU para ver el menú. Pulse los botones ▲ o ▼ para seleccionar Sonido y, a continuación, pulse el botón ENTER. TV 2 Pulse los botones ▲ o ▼ para seleccionar Opc. Multi-track y, a continuación, pulse el botón ENTER.
Encendido/apagado del altavoz del televisor Se silencia la salida de sonido del Altavoz TV. 1 Pulse el botón MENU para ver el menú. Pulse los botones ▲ o ▼ para seleccionar Sonido y, a continuación, pulse el botón ENTER. TV Sonido Modo : Favorito Ecualizador Trusurround SRS XT : Apagado Opc. Multi-track Vol. Auto : Apagado Altavoz TV : Apagado 2 Pulse los botones ▲ o ▼ para seleccionar Altavoz TV y, a continuación, pulse el botón ENTER.
Control de los canales Selección de la antena 1 Pulse el botón MENU para ver el menú. Pulse los botones ▲ o ▼ para seleccionar Canal ; a continuación pulse el botón ENTER. TV Canal Aire Antena : Aire Prog. Auto Cable Borrar canal encriptado Lista de canales Nombre Sintonia Fina Intensidad señal 2 Pulse el botón ENTER para seleccionar Antena. Pulse los botones ▲ o ▼ para seleccionar Aire o Cable y, a continuación, pulse el botón ENTER. Pulse el botón EXIT para salir.
Adición y supresión de canales Puede añadir o suprimir un canal para que se muestren los canales que desee. 1 Pulse el botón MENU para ver el menú. Pulse los botones ▲ o ▼ para seleccionar Canal ; a continuación pulse el botón ENTER. TV Canal Antena : Aire Prog. Auto Borrar canal encriptado Lista de canales Nombre Sintonia Fina Intensidad señal 2 Pulse los botones ▲ o ▼ para seleccionar Lista de canales ; a continuación pulse el botón ENTER. Mover TV Pulse el botón MENU para volver.
Visualización de las listas de canales Puede mostrar una lista de todos los canales, los agregados o de los favoritos. 1 Pulse el botón MENU para ver el menú. Pulse los botones ▲ o ▼ para seleccionar Canal ; a continuación pulse el botón ENTER. TV Canal Antena : Aire Prog. Auto Borrar canal encriptado Lista de canales Nombre Sintonia Fina Intensidad señal 2 Pulse los botones ▲ o ▼ para seleccionar Lista de canales ; a continuación pulse el botón ENTER.
5 Pulse el botón ▲ o ▼ para seleccionar Favoritos y, a continuación, pulse el botón ENTER. Se resaltará el símbolo “ ” y el canal se configurará como favorito. Si desea cancelar la selección de un canal como favorito, pulse el botón ENTER hasta que el símbolo “ ” desaparezca. Pulse el botón EXIT para salir. ➢ Sólo pueden seleccionarse como favoritos los canales memorizados. ➢ Todos los canales seleccionados se mostrarán en el menú Favoritos.
Sintonización fina de los canales analógicos Utilice la sintonización fina para ajustar manualmente un determinado canal a fin de que la recepción sea óptima. 1 Pulse el botón MENU para ver el menú. Pulse los botones ▲ o ▼ para seleccionar Canal ; a continuación pulse el botón ENTER. TV Canal Antena : Aire Prog. Auto Borrar canal encriptado Lista de canales Nombre Sintonia Fina Intensidad señal 2 Pulse los botones ▲ o ▼ para seleccionar Sintonía Fina y, a continuación, pulse el botón ENTER.
Pantalla de ordenador Uso del televisor como pantalla del PC Configuración del software del PC (basado en Windows XP) A continuación se muestra la configuración de visualización de Windows para un ordenador típico. Probablemente la pantalla real de su PC sea distinta; dependerá de la versión concreta de Windows y de la tarjeta de vídeo que tenga. Aunque las pantallas reales sean diferentes, la información de configuración básica que se aplica en casi todos los casos es la misma.
• No se admite el modo entrelazado. • El televisor no funciona correctamente si se selecciona un formato de vídeo que no sea estándar. • La tabla anterior está conforme con la normativa de IBM/VESA y se basa en la utilización de una entrada analógica. • “ ✔ ” indica que se puede admitir este modo. ➢ • La calidad de texto del PC para PN42A410C1D es óptima en modo VESA (1024 x 768 @ 60 Hz). • La calidad de texto del PC para PN50A410C1D es óptima en modo VESA (1360 x 768 @ 60Hz).
2 Pulse el botón ENTER para seleccionar Fijar la imagen. TV Pulse el botón EXIT para salir. Es posible que aparezcan rayas verticales en la imagen o que ésta aparezca borrosa. Fijar la Imagen Grueso Fino 3 Pulse los botones ▲ o ▼ para seleccionar Grueso o Fino y, a continuación, pulse el botón ENTER. Pulse los botones ◄ o ► para seleccionar la calidad de imagen que desee ajustar y, a continuación, pulse el botón ENTER.
Ajuste de la hora Configuración de la hora El ajuste del reloj es necesario para utilizar las distintas funciones de temporización del televisor. Además, podrá ver la hora mientras ve la televisión. (Pulse el botón INFO.) Opción 1: Ajuste manual del reloj 1 Pulse el botón MENU para ver el menú. Pulse los botones ▲ o ▼ para seleccionar Configuración y, a continuación, pulse el botón ENTER. Pulse los botones ▲ o ▼ para seleccionar Tiempo y, a continuación, pulse el botón ENTER.
Opción 2: Ajuste automático del reloj El reloj puede ajustarse automáticamente cuando se recibe una señal digital. 1 Plug & Play ► Idioma : Español ► Tiempo ► V-Chip ► Subtítulo ► Configuración externa ► Entretenimiento : Apagado ► ▼ Más Mover Ingresar Regresar Pulse el botón MENU para ver el menú. Pulse los botones ▲ o ▼ para seleccionar Configuración y, a continuación, pulse el botón ENTER. Pulse los botones ▲ o ▼ para seleccionar Tiempo y, a continuación, pulse el botón ENTER.
2 Hay tres opciones diferentes para configurar la activación y desactivación del temporizador. Pulse los botones ▲ o ▼ para seleccionar Temporizador 1, Temporizador 2 o Temporizador 3 y, a continuación, pulse el botón ENTER. Aparece el menú del temporizador. Pulse los botones ▲ o ▼ para ajustar la hora y pulse el botón ► para ir al paso siguiente. Ajuste otras opciones utilizando este mismo método.
Descripción de las funciones Selección del idioma de los menús 1 Pulse el botón MENU para ver el menú. Pulse los botones ▲ o ▼ para seleccionar Configuración y, a continuación, pulse el botón ENTER. Pulse los botones ▲ o ▼ para seleccionar Idioma y, a continuación, pulse el botón ENTER. 2 Pulse los botones ▲ o ▼ para seleccionar el idioma: English, Español o Français y, a continuación, pulse el botón ENTER.
4 Pulse los botones ▲ o ▼ para seleccionar Modo de Subtítulo y, a continuación, pulse el botón ENTER. Pulse los botones ▲ o ▼ para seleccionar un submenú (Programado, Servicio1 ~ Servicio6, CC1 ~CC4 o Texto1 ~Texto4) y, a continuación, pulse el botón ENTER. ➢ Los modos de subtitulación digital Servicio1~6 pueden no estar disponibles según el tipo de emisión. ➢ Las Opciones - Subtítulos Dig. sólo están disponibles cuando puede seleccionarse Predeterminado, Servicio1-Servicio6 en Modo Subtítulo.
Visión de subtítulos (mensajes de texto en pantalla) - Analógico La función Subtítulo analógico funciona tanto en el modo de canal de televisión analógica como cuando la señal proviene de un dispositivo externo. (Dependiendo de la señal de transmisión, la función de Subtítulos analógicos puede funcionar en canales digitales.) 1 Pulse el botón MENU para ver el menú. Pulse los botones ▲ o ▼ para seleccionar Configuración y, a continuación, pulse el botón ENTER.
Ajuste de la melodía de encendido y apagado del televisor El volumen del sonido de la melodía del encendido y del apagado del televisor se puede configurar. 1 Pulse el botón MENU para mostrar el menú. Pulse los botones ▲ o ▼ para seleccionar Configuración y, a continuación, pulse el botón ENTER.
Configuración del modo Entretenimiento El modo Entretenimiento permite seleccionar la mejor visualización y el sonido óptimo para ver deportes y películas y para los juegos. 1 Pulse el botón MENU para mostrar el menú. Pulse los botones ▲ o ▼ para seleccionar Configuración y, a continuación, pulse el botón ENTER. 2 Pulse los botones ▲ o ▼ para seleccionar Entretenimiento y, a continuación, pulse el botón ENTER.
Actualización del software Samsung puede ofrecer actualizaciones del firmware del televisor en el futuro. Póngase en contacto con el centro de llamadas de Samsung en 1-800-SAMSUNG para recibir información acerca de la descarga de las actualizaciones y del uso de un controlador USB. Las actualizaciones se pueden realizar conectando una unidad USB al puerto USB. 1 Inserte una unidad USB que contenga la actualización del firmware en el puerto de actualización USB de la parte posterior del televisor.
Uso del V-Chip Sólo EE.UU. Este producto está protegido por las siguientes patentes de EE.UU.: US4,930,158 US4,930,160 La opción V-Chip bloquea automáticamente los programas que no se consideran apropiados para los menores. El usuario debe introducir primero un código PIN (número de identificación personal) para configurar o cambiar las limitaciones de V-Chip. ➢ La función V-Chip no está disponible en los modos HDMI o componente.
Activación/desactivación de V-Chip 1 Pulse el botón MENU para ver el menú. Pulse los botones ▲ o ▼ para seleccionar Configuración y, a continuación, pulse el botón ENTER. TV V-Chip Ingresar código * 2 Pulse los botones ▲ o ▼ para seleccionar V-Chip y pulse el botón ENTER. Aparecerá el mensaje Ingresar código. Escriba su código PIN de 4 dígitos. 3 Aparecerá la pantalla V-Chip. Para activar la función V-Chip, pulse el botón ENTER para que el campo Bloqueo V-Chip se ajuste en Encendido.
4 Aparecerá la pantalla Guías pater. TV. Pulse los botones ▲ o ▼ para seleccionar una de las seis categorías basadas en la edad: • TV-Y : Todos los niños. Los temas y elementos de este programa están diseñados específicamente para audiencia muy joven, incluidos niños de edad entre los dos y seis años. • TV-Y7 : Dirigido a niños más mayores. Los temas y elementos de este programa pueden incluir violencia física o cómica suave, o puede asustar a niños con una edad inferior a los 7 años.
Cómo configurar las limitaciones utilizando Clas. MPAA (G, PG, PG-13, R, NC-17, X, NR) El sistema de clasificación MPAA utiliza el sistema de la Asociación americana de cinematografía y se aplica principalmente en las películas. Cuando el bloqueo V-Chip está activado, el televisor bloquea automáticamente cualquier programa que tenga una determinada clasificación (ya sea según la clasificación MPAA o según la guía de programas de TV). 1 Pulse el botón MENU para ver el menú.
Cómo configurar las limitaciones utilizando la opción “Inglés Canadiense” (para modelos del Canadá) 1 Pulse el botón MENU para ver el menú. Pulse los botones ▲ o ▼ para seleccionar Configuración y, a continuación, pulse el botón ENTER. 2 Pulse los botones ▲ o ▼ para seleccionar V-Chip y pulse el botón ENTER. Aparecerá el mensaje Ingresar código. Escriba su código PIN de 4 dígitos.
Cómo configurar las limitaciones utilizando la opción “Francés Canadiense” (para modelos del Canadá) 1 Pulse el botón MENU para ver el menú. Pulse los botones ▲ o ▼ para seleccionar Configuración y, a continuación, pulse el botón ENTER. 2 Pulse los botones ▲ o ▼ para seleccionar V-Chip y pulse el botón ENTER. Aparecerá el mensaje Ingresar código. Escriba su código PIN de 4 dígitos.
Uso de V-Chip (V-Chip) con los canales digitales La información de la restricción de bloqueo se puede usar mientras se ven los canales DTV. 1 Plug & Play ► Idioma : Español ► Tiempo ► V-Chip ► Subtítulo ► Configuración externa ► Entretenimiento : Apagado ► ▼ Más Mover Ingresar Regresar Pulse el botón MENU para ver el menú. Pulse los botones ▲ o ▼ para seleccionar Configuración y, a continuación, pulse el botón ENTER. 2 Pulse los botones ▲ o ▼ para seleccionar V-Chip y pulse el botón ENTER.
Cómo reiniciar el televisor después de que V-Chip bloquee un canal (“Salida de emergencia”) Si el televisor sintoniza un canal restringido, el V-Chip lo bloqueará. La pantalla quedará en blanco y aparecerá el siguiente mensaje: 1 Escriba su código PIN. Para volver al modo de visualización normal, sintonice un canal diferente con los botonesW.LInK CH o CH . En ciertas condiciones (según la clasificación de los programas de televisión locales) la función V-Chip puede bloquear todos los W.LInK canales.
경고 Apéndice 주의 Fijación del televisor a la pared Precaución: Tirar del televisor, empujarlo o colgarse de él puede provocar su caída. En especial, procure que los niños no se cuelguen del televisor ni lo desestabilicen; éste podría caerse sobre ellos y causarles lesiones graves o incluso la muerte. Siga las precauciones de seguridad del folleto de seguridad incluido con el producto. Para mejorar la estabilidad instale un dispositivo antivuelco, como se explica a continuación.
Identificación de problemas Si cree que el televisor tiene un problema, compruebe primero esta lista de posibles problemas y soluciones. Si ninguno de los consejos funciona, póngase en contacto con el centro de atención al cliente de Samsung o llame al 1-800-SAMSUNG. Problema Mala calidad de imagen. Sonido de mala calidad. No hay imagen ni sonido. No hay sonido o se oye demasiado bajo con el volumen al máximo. La imagen se mueve verticalmente. El televisor funciona de forma inestable.
Ajuste de montaje en la pared (se vende por separado) Una vez instalado el montaje mural, la posición del televisor se puede ajustar fácilmente. Panel posterior del TV Automatique Mur-Montez Cable de EX-LINK (no suministrado) Acceso al menú Configuración externa TV Melodía : Medio ► Efecto de luz : Viendo la TV ► Ajuste de montaje en pared ► Mover 4 Pulse el botón EntEr para guardar. ➢ Cuando se selecciona la Posición1, se muestra el mensaje Pos. act. guardada como Posición 1..
Desplazamiento a la posición memorizada ► Posición Ajuste ► Ajuste de montaje en pared ► 1 Complete el paso 1 de Acceso al menú. 2 Pulse un botón de color (rojo, verde, amarillo) para mover el montaje mural a la posición guardada. ➢ Se puede mover el montaje mural a una de las tres posiciones preconfiguradas con los botones rojo (posición 1), verde (posición 2) o amarillo (posición 3). ➢ Si después de usar una posición preconfigurada se ajusta ésta, la visualización de la posición desaparece.
Especificaciones del equipo de montaje en la pared (VESA) Instale el montaje mural en una pared sólida, perpendicular al suelo. Para colocarlo en otros materiales de construcción, póngase en contacto con el distribuidor más cercano. Si se instala en el techo o en una pared inclinada, puede caerse y causar graves lesiones personales.
Cómo montar el soporte base Utilizando los 6 tornillos para asegurar el soporte y el monitor, fije firmemente el monitor al soporte. Es posible que el exterior del EQUIPO sea diferente del que se muestra en la imagen. Cuando instale el televisor en una pared, fije la tapa (1) del soporte con dos tornillos. Advertencia Sujete firmemente el soporte al televisor antes de moverlo, ya que el soporte puede caer y podría causar lesiones graves. ➢ El televisor lo deben transportar dos o más personas.
Dimensiones (PN42A410C1D) VISTA SUPERIOR VISTA FRONTAL DETALLE DE PANEL DE CONECTORES 3,7 Al x 7,2 An VISTA LATERAL VISTA POSTERIOR NOTA: No todos los dibujos están necesariamente a escala. Algunas dimensiones están sujetas a cambio sin previo aviso. Consulte las dimensiones de cada unidad antes adaptar el mueble para el televisor. La empresa no se responsabiliza de cualquier error tipográfico o de impresión. © 2008 Samsung Electronics America, Inc. Español - 67 Carnelian Spa _ BN68-01428A-01.
Dimensiones ( PN50A410C1D) VISTA SUPERIOR VISTA FRONTAL DETALLE DE PANEL DE CONECTORES 3,7 Al x 7,2 An VISTA LATERAL VISTA POSTERIOR NOTA: No todos los dibujos están necesariamente a escala. Algunas dimensiones están sujetas a cambio sin previo aviso. Consulte las dimensiones de cada unidad antes adaptar el mueble para el televisor. La empresa no se responsabiliza de cualquier error tipográfico o de impresión. © 2008 Samsung Electronics America, Inc. Español - 68 Carnelian Spa _ BN68-01428A-01.
Esta página se ha dejado en blanco expresamente. Carnelian Spa _ BN68-01428A-01.
Esta página se ha dejado en blanco expresamente. Carnelian Spa _ BN68-01428A-01.