2009 Samsung TV F/W Upgrade Guide Samsung Electronics
¾ Model List LCD TV . LB360 series : LN19B360C5D, LN22B360C5D, LN22B360C8D, LN26B360C5D, LN32B360C5D . LB361 series : LN19B361C5D . LB460 series : LN22B460B2D, LN26B460B2D, LN32B460B2D . LB530 series : LN32B530P7F, LN32B530P7N, LN37B530P7F LN40B530P7F, LN40B530P7N, LN46B530P7F LN46B530P7N, LN52B530P7F . LB540 series : LN32B540P8D, LN40B540P8F, LN46B540P8F LN52B540P8F . LB550 series : LN32B550K1F, LN37B550K1F, LN40B550K1F LN46B550K1F, LN52B550K1F . LB650 series : LN19B650T6D, LN22B650T6D PDP TV .
Step1. How to prepare the USB Memory Drive 1. Save the firmware file into your computer. File Name : 2009 DTV S4 firmware.exe 2. Connect the USB Memory Drive to the USB port of your PC. Copy the file into the USB Memory Drive. 3. Go to the USB Memory Drive and then double click the file. 4. Click on the “Unzip” button. 5. Unzipping is in progress. 6. After completing, click on the 7. Two folders containing the firmware files “OK” and “Close” buttons. have been added to the USB memory drive.
9. Turn your TV on, and then insert the USB Memory Drive containing the firmware into the USB port on the rear of the TV 10. Press the MENU button to display the menu. Press the ▲ or ▼ button to select “Support”, then press the ENTER button 12. The message “Scanning for USB. 11. Press the ▲ or ▼ button to select “Software Upgrade”, then press the ENTER button. 13. Then, the message “Upgrade It may take up to 30 seconds” Version XXXX to version XXXX? is displayed.
※ Do not pull the USB drive out or unplug the power cable until complete 14. When the software upgrade is complete; the TV will turn off and then back on by itself. Proceed with the ‘Plug & Play’ setup. 15. Once ‘Plug & Play’ is complete; “Enjoy your watching.” is displayed. Press the ‘Enter’ key and you are done. ※ Important If the firmware version you downloaded from the Samsung website or received from Samsung is older than or has a lower version number than the version on your TV, do not install it.