User Manual (ver.1.0)
English - 53
Option 2: Setting the Clock Automatically
The Clock can be set automatically if you are receiving a digital signal.
1
Press the MENU button to display the menu.
Press the ▲ or ▼ button to select Setup, then press the ENTER button.
Press the ▲ or ▼ button to select Time, then press the ENTER button.
2
Press the ENTER button to select Clock.
3
Press the ENTER button to select Clock Mode.
Press the ▲ or ▼ button to select Auto, then press the ENTER button.
4
Press the ▲ or ▼ button to select Time Zone, then press the ENTER button.
5
Press the ▲ or ▼ button to highlight the time zone for your local area, then
press the ENTER button.
6
Press the ▲ or ▼ button to select DST (Daylight Saving Time), then press the
ENTER button.
Press the ▲ or ▼ button to select On or Off, then press the ENTER button.
Press the
EXIT button to exit.
➢
Depending on the broadcast station and signal, the auto time may not be set
correctly. If this occurs, set the time manually.
➢
Antenna or Cable must be connected in order to set the time automatically.
Continued...
Setup
Plug & Play
Language : English
Time ►
V-Chip
Caption
External Settings
Entertainment : Off
Energy Saving : Off
PIP
SW Upgrade
Time Zone
Newfoundland
Atlantic
Eastern
Central
Mountain
Pacific
ReturnEnter
Move
▼
Clock
Clock : 7 : 30 am ►
Sleep Timer : Off
Timer 1 : Inactivated
Timer 2 : Inactivated
Timer 3 : Inactivated
ReturnEnter
Move
Clock
Clock Mode : Auto ►
Clock Set ►
Time Zone ►
DST : Off
ReturnEnter
Auto
Manual
Move
Clock
Clock Mode : Auto
Clock Set
Time Zone
DST :
ReturnEnter
Off
On
Move
Clock
Clock Mode : Auto
Clock Set
Time Zone ►
DST : Off
ReturnEnter
Move
Spinel_BN68-01411A_0214 (50-69).53 53 2008-02-15 ¿ÀÈÄ 5:20:16