User Manual (ver.1.0)

English - 54
Setting the On/Off Timer
Use this feature to set the TV to turn on or off at a desired time. You must set
the clock first.
1
Press the MENU button to display the menu.
Press the ▲ or ▼ button to select Setup, then press the ENTER button.
Press the ▲ or ▼ button to select Time, then press the ENTER button.
2
Three different On/Off Timer Settings can be made.
Press the ▲ or ▼ button to select Timer1, Timer2,or Timer3, then press the
ENTER button. The timer menu is displayed.
Press the ▲ or ▼ button to adjust hour, then press the ► button to move to the
next step. Set other items using the same method as above.
3
Press the ◄ or ► button to select the desired item below.
Press the ▲ or ▼ button to adjust the setting.
Press the
EXIT button to exit.
On Time: Set the Hour, Minute, am/pm, and Activation/Inactivation.
(To activate timer with the setting you’ve chosen, set to Activate.)
Off Time: Set the Hour, Minute, am/pm, and Activation/Inactivation.
(To activate timer with the setting you’ve chosen, set to Activate.)
Volume: Set the required volume level.
Contents: When the On Time is activate, you can turn on a specic channel or
play back contents such as photo or audio les.
TV/USB: Select TV or USB. (Make sure that an USB device is connected to
your TV.)
Antenna: Select Air or Cable.
Channel: Select the desired channel.
Music: Select the folder containing MP3 les on the USB device.
Photo: Select the folder containing JPEG les on the USB device.
Repeat: Select Once, Everyday, Mon~Fri, Mon~Sat, Sat~Sun, or Manual.
➢
When Manual is selected, Press the ► button to select the desired day of the
week. Press the ENTER button over the desired day and the mark ( ) will
appear.
•
•
•
•
–
–
–
–
–
•
➢
You can set the hour, and minute directly by pressing the number buttons on
the remote control.
➢
Auto Power Off
When you set the timer
On, the television will eventually turn off, if no
controls are operated for 3 hours after the TV was turned on by the timer.
This function is only available in timer On mode and prevents overheating,
which may occur if a TV is on for too long time.
Continued...
Setup
Plug & Play
Language : English
Time ►
V-Chip
Caption
External Settings
Entertainment : Off
Energy Saving : Off
PIP
SW Upgrade
Clock
Clock : 7 : 30 am
Sleep Timer : Off
Timer 1 : Inactivated ►
Timer 2 : Inactivated
Timer 3 : Inactivated
ReturnEnter
Move
Timer 1
ReturnEnter
Adjust
Move
12 00 am Inactivate
On Time
12 00 am Inactivate
Off Time
10
TV
Volume Contents
Cable 3
Once
Repeat Sun Mon Tue Wed The Fri Sat
Contents
Adjust
Move
Enter Return
Cable
Antenna
3
Channel
TV
TV/USB
None
Music
None
Photo
Spinel_BN68-01411A_0214 (50-69).54 54 2008-02-15 ¿ÀÈÄ 5:20:17