Contact SAMSUNG WORLD-WIDE If you have any questions or comments relating to Samsung products, please contact the SAMSUNG customer care center. Comment contacter Samsung dans le monde Si vous avez des suggestions ou des questions concernant les produits Samsung, veuillez contacter le Service Consommateurs Samsung. Country Customer Care Center Web Site CANADA 1-800-SAMSUNG (7267864) www.samsung.com/ca U.S.A 1-800-SAMSUNG (7267864) www.samsung.com/us Address Samsung Electronics Canada Inc.
Important Warranty Information Regarding Television Format Viewing Wide screen format PDP Displays (16:9, the aspect ratio of the screen width to height) are primarily designed to view wide screen format full-motion video. The images displayed on them should primarily be in the wide screen 16:9 ratio format, or expanded to fill the screen if your model offers this feature and the images are constantly moving.
User Instructions Screen Image retention Do not display a still image (such as on a video game) on the plasma display panel for more than several minutes as it can cause screen image retention. This image retention is also known as “screen burn”. To avoid such image retention, refer to page 32 of this manual to reduce the degree of brightness and contrast of the screen when displaying a still image. Altitude The PDP can only operate normally at heights under 6500ft.
English Contents General Information Function Description ■ ■ ■ ■ ■ ■ ■ Selecting a Menu Language................................................... 56 ■ Using the V-Chip..................................................................... 57 ■ Viewing Closed Captions (On-Screen Text Messages) - Digital.................................................................................... 65 ■ Viewing Closed Captions (On-Screen Text Messages) - Analog........................................................
General Information List of Features • • • • • Adjustable picture settings that can be stored in the TV’s memory. Automatic timer to turn the TV on and off. A special sleep timer. V-Chip function. Excellent Digital Interface & Networking : With a built-in HD digital tuner, non-subscription HD broadcasts can be viewed with no Cable Box/Satellite receiver (SetTop Box) needed. • HDMI/DVI connection of your PC to this TV. • Excellent Picture Quality - DNIe technology provides life-like clear images.
Viewing the Control Panel Buttons on the Lower-Right Part of the Panel The buttons on the lower-right panel control your TV’s basic features, including the on-screen menu. To use the more advanced features, you must use the remote control. ➢ The product color and shape may vary depending on the model. Front Panel buttons Touch each button to operate. 1 SOURCE Toggles between all the available input sources (TV, AV1, AV2, S-Video, Component1, Component2, PC, HDMI1, HDMI2/DVI, HDMI3, HDMI4, USB, DLNA).
Viewing the Connection Panel Rear Panel Jacks Use the rear panel jacks to connect A/V components that will be connected continuously, such as VCR or DVD players. For more information on connecting equipment, see pages 9~15. The product color and shape may vary depending on the model. 1 POWER IN Connect the supplied power cord. 2 DIGITAL AUDIO OUT (OPTICAL) Connect to a Digital Audio component. 3 AUDIO OUT (R/L) Audio outputs to external devices.
Remote Control You can use the remote control up to a distance of about 23 feet from the TV. 1 POWER % Use these buttons in theRETURNDMA, WISELINK and Anynet+ modes. ( : This remote can be used EXIT to control recording W.LINK on Samsung recorders with the Anynet+ feature) CH LIST INFO Turns the TV on and off. 2 TV Selects the TV mode directly. RETURN 3 NUMERIC BUTTONS W.
Installing Batteries in the Remote Control 1 Lift the cover at the back of the remote control upward as shown in the figure. 2 Install two AAA size batteries. ➢ Make sure to match the “+” and “–” ends of the batteries with the diagram inside the compartment. ➢ Using the remote control with the ON/OFF( ) light button set to On will reduce the battery usage time. 3 Close the cover as shown in the figure.
Connecting Cable TV To connect to a cable TV system, follow the instructions below. Cable without a Cable Box 1 Plug the incoming cable into the ANT IN terminal on the back of the TV. ➢ Because this TV is cable-ready, you do not need a cable box to view unscrambled cable channels. ANT IN Connecting to a Cable Box that Descrambles All Channels 1 Find the cable that is connected to the ANT OUT terminal on your cable box. ➢ This terminal might be labeled “ANT OUT”, “VHF OUT” or simply, “OUT”.
Connecting a DVD/Blu-Ray Player or Cable Box / Satellite receiver (Set-Top Box) via HDMI This connection can only be made if there is an HDMI Output jack on the external device. This connection will provide the highest quality picture. 1 Connect an HDMI Cable between the HDMI IN (1, 2, 3 or 4) jack on the TV and the HDMI jack on the DVD/BluRay Player or Cable Box / Satellite receiver (Set-Top Box).
Connecting a DVD/Blu-Ray Player or Cable Box / Satellite receiver (Set-Top Box) via Component cables The rear panel jacks on your TV make it easy to connect a DVD/Blu-Ray Player/Cable Box/Satellite receiver (SetTop Box) to your TV. 1 Connect a Component Cable between the COMPONENT IN (1 or 2) [Y, PB, PR] jacks on the TV and the COMPONENT [Y, PB, PR] jacks on the DVD/BluRay Player or Cable Box / Satellite receiver(Set-Top Box).
Connecting a VCR Video Connection These instructions assume that you have already connected your TV to an antenna or a cable TV system (according to the instructions on pages ~10). Skip step 1 if you have not yet connected to an antenna or a cable system. 1 Unplug the cable or antenna from the back of the TV. Connect the cable or antenna to the ANT IN terminal on the back of the VCR. Connect an Antenna Cable between the ANT OUT terminal on the VCR and the ANT IN terminal on the TV.
Connecting a Digital Audio System The rear panel jacks on your TV make it easy to connect a Digital Audio System(Home theater/Receiver) to your TV. 1 Connect an Optical Cable between the DIGITAL AUDIO OUT (OPTICAL) jacks on the TV and the Digital Audio Input (OPTICAL) jacks on the Digital Audio System.
Connecting a PC Using the D-Sub Cable 1 Connect a D-Sub Cable between PC IN [PC] jack on the TV and the PC output jack on your computer. Connect a PC Audio Cable between the PC IN [AUDIO] jack on the TV and the Audio Out jack of the sound card on your computer. Using the D-Sub Cable TV Rear Panel PC PC Audio Cable (Not supplied) 1 D-Sub Cable (Not supplied) Using the HDMI/DVI Cable 1 Connect a HDMI/DVI cable between the HDMI IN 2 jack on the TV and the PC output jack on your computer.
Operation Turning the TV On and Off Press the POWER button on the remote control. You can also use the POWER button on the TV. ➢ It may take a little while before you see a full picture. Plug & Play Feature The first time you turn on your new TV, choose your basic settings for language, input source and channels, and time of day using the plug and play feature. The TV will store these settings in memory.
5 The TV will begin memorizing all of the available channels. After all the available channels are stored, the TV starts to remove scrambled channels (see page 47). The Auto program menu then reappears. Press the ENTER button when channel memorization is complete. The Clock Mode menu is displayed. ➢ Plug & Play Auto Program in Progress. DTV Air : 02 Air:11 DTV Cable : 23 Cable: 21 To stop the search before it has finished, press the ENTER button with stop selected.
If you want to reset this feature... 1 2 Press the ENTER button to select Plug & Play. For further details on setting up options, refer to the pages 16~17. ➢ The Plug & Play feature is only available in the TV mode. Setup Press the MENU button to display the menu. Press the ▲ or ▼ button to select Setup, then press the ENTER button.
Adjusting the Volume Using the Volume Buttons RETURN 1 RETURN Press the VOL or VOL button to increase or decrease the volume. EXIT W.LINK To turn the volume up, turn the wheel clockwise when the Volume ➢ W.LINK EXIT CH LIST INFO Control window is displayed. To turn the volume down, turn the wheel TOOLS CH LIST INFO counterclockwise. TOOLS Using the Mute Button At any time, you can cut off the sound using the MUTE button. 1 Press MUTE and the sound cuts off. will displayed on the screen.
Using the Remote Control Backlight Buttons Use this feature in dark surroundings and when you are unable to see the remote control buttons clearly. 1 Press the ON/OFF light button Pressing the ON/OFF light button toggles between ON and OFF. ➢ ➢ When ON, the button backlight is turned on for a moment. ➢ Pressing a remote control button when the remote control is on turns the button backlight on for a moment.
Easy Setting 1 Tools Press the TOOLS button on the remote control. Anynet+(HDMI-CEC) Multi-Track Sound : Stereo Picture Size : 16:9 Picture Mode : Standard Sound Mode : Custom Sleep Timer : Off Add to Favorite Switch to Cable 2 Press the ▲ or ▼ button to select Switch to Cable or Switch to Air. 3 Press the ENTER button. Move Enter Exit Storing Channels in Memory (Automatic Method) 1 Antenna Channel Press the MENU button to display the menu.
To Select the Source Use to select TV or other external input sources such as DVD/Blu-Ray players or Cable Box/Satellite receivers (Set-Top Box) connected to the TV. Use to select the input source of your choice. 1 Input Press the MENU button to display the menu. Press the ▲ or ▼ button to select Input, then press the ENTER button. Source List Edit Name Press the ENTER button to select Source List. Press the ▲ or ▼ button to select the signal source, then press the ENTER button.
Picture Control Changing the Picture Standard 1 Press the MENU button to display the menu. Press the ENTER button to select Picture. Picture You can select the type of picture which best corresponds to your viewing requirements. 2 Press the ENTER button to select Mode. Press the ▲ or ▼ button to select Dynamic, Standard, or Movie. Press the ENTER button.
Adjusting the Detailed Settings Samsung’s new TVs allow you to make even more precise picture settings than previous models. See below to adjust detailed picture settings. Activating Detailed Settings 1 Picture Press the MENU button to display the menu. Press the ENTER button to select Picture. 2 Press the ENTER button to select Mode. Press the ▲ or ▼ button to select Standard or Movie, then press the ENTER button. ➢ Detailed Settings is available in Standard or Movie mode.
Changing the Color Space Color space is a color matrix composed of red, green and blue colors. Select your favorite color space to experience the most natural color. Detailed Settings 10 Press the ▲ or ▼ button to select Color Space, then press the ENTER button. Black Adjust : Off Dynamic Contrast : Medium Gamma :0 Color Space : Native White Balance Flesh Tone :0 Edge Enhancement : On Move 11 Press the ENTER button again to select Color Space.
Activating White Balance You can adjust the color temperature for more natural picture colors. Detailed Settings 17 Press the ▲ or ▼ button to select White Balance, then press the ENTER button. 18 Select the required option by pressing the ▲ or ▼ button, then press the ENTER button.
Activating xvYCC Setting the xvYCC mode to On increases detail and color space when watching movies from an external device (ie. DVD player) connected to the HDMI or Component IN jacks. 24 Press the ▲ or ▼ button to select xvYCC, then press the ENTER button. 25 Press the ▲ or ▼ button to select Off or On. Press the ENTER button. ➢ x vYCC is available when the picture mode is set to Movie, and the external input is set to Component or HDMI mode.
Changing the Screen Size Occasionally, you may want to change the size of the image on your screen. Your TV comes with six screen size options, each designed to work best with specific types of video input. Your cable box or satellite receiver may have its own set of screen sizes as well. In general, though, you should view the TV in 16:9 mode as much as possible. 1 Follow the Activating Picture Options instructions numbers 1 and 2. 2 Press the ▲ or ▼ button to select Size, then press the ENTER button.
16:9 Sets the picture to 16:9 wide mode. Zoom1 The screen size when Wide screen is vertically enlarged. Zoom2 The screen size when the Zoom1 screen is vertically enlarged. Wide Fit Enlarges the aspect ratio of the picture to fit the entire screen. 4:3 Sets the picture to 4:3 normal mode. Just Scan Use this function to see the full image without any cutoff when HDMI(720p/1080i/1080p), Component(1080i/1080p) or DTV(1080i) signals are input.
DNIe (Digital Natural Image engine) This TV includes the DNIe function to provide high visual quality. If you set DNIe to on, you can view the screen with the DNIe feature activated. 1 2 Follow the Activating Picture Options instructions numbers 1 and 2. (Refer to page 27) Press the ▲ or ▼ button to select DNIe, then press the ENTER button.
Setting the Advanced Film Mode The TV can be set to automatically sense and process film signals from all sources and adjust the picture for optimum quality. 1 2 Follow the Activating Picture Options instructions numbers 1 and 2. (Refer to page 27) Press the ▲ or ▼ button to select Advanced Film Mode, then press the ENTER button.
Reducing the Effects of Screen Burn If screen burn has occurred, you can select a white screen or scrolling to help remove screen burn artifacts. 1 Follow the Activating Picture Options instructions numbers 1 and 2. (Refer to page 27) 2 Press the ▲ or ▼ button to select Screen Burn Protection, then press the ENTER button.
Preventing Screen Burn-in To reduce the possibility of screen burn, this unit is equipped with screen burn prevention technology. This technology enables you to set picture movement up/ down (Vertical Line) and side to side (Horizontal Dot). The Time setting allows you to program the time between movement of the picture in minutes. 1 Follow the Activating Picture Options instructions numbers 1 and 2.
Resetting the Picture Settings to the Factory Defaults 2 Press the ▲ or ▼ button to select Picture Reset, then press the ENTER button. Press the ◄ or ► button to select Reset Picture Mode or Cancel then press the ENTER button. Press the EXIT button to exit. ➢ Detailed Settings Picture Options Picture 1 To select the desired picture mode, follow the Changing the Picture Standard instructions numbers 1 and 2. (see page 23) Picture Reset ► Each mode can be reset.
Changing the Position of the PIP Window 4 Press the ▲ or ▼ button to select Position, then press the ENTER button. Press the ▲ or ▼ button to select the desired PIP window position, then press the ENTER button. ➢ In Double Window ( ) and Double Wide ( ) modes, Position cannot be selected. PIP PIP : Size : On Position : Air/Cable : Cable Channel : Cable 3 Enter Move Return Air/Cable 5 Press the ▲ or ▼ button select Air/Cable, then press the ENTER button.
Sound Control Changing the Sound Standard You can select the sound mode to best suit the programming you’re watching. 1 Sound Press the MENU button to display the menu. Press the ▲ or ▼ button to select Sound, then press the ENTER button. Mode : Custom ► Equalizer 2 Press the ENTER button to select Mode. Press the ▲ or ▼ button to select Standard, Music, Movie, Speech, or Custom sound setting, then press the ENTER button.
4 Press the ▲ or ▼ button to select a particular frequency to adjust. Press the ◄ or ► button to increase or decrease the level of the particular frequency. • Mode: Selects the sound mode among the predefined settings. • Balance L/R: Adjusts the balance between the right and left speaker. • Bandwidth Adjustment (100Hz, 300Hz, 1kHz, 3kHz, 10kHz): To adjust the level of different bandwidth frequencies.
Choosing Preferred Language The digital-TV transmission system is capable of simultaneous transmission of many audio tracks (for example, simultaneous translations of the program into foreign languages). 1 Equalizer SRS TruSurround XT Sound Press the MENU button to display the menu. Press the ▲ or ▼ button to select Sound, then press the ENTER button. 2 Press the ▲ or ▼ button to select Preferred Language, then press the ENTER button. Press the EXIT button to exit.
Automatic Volume Control Reduces the difference in volume level among broadcasters. 1 Press the MENU button to display the menu. Press the ▲ or ▼ button to select Sound, then press the ENTER button. Preferred Language Sound 2 Press the ▲ or ▼ button to select Auto Volume, then press the ENTER button. 3 Press the ▲ or ▼ button to select Off or On, then press the ENTER button.
Listening to the Sound of the Sub (PIP) Picture When the PIP feature is activated, you can listen to the sound of the sub (PIP) picture. 1 Sound Press the MENU button to display the menu. Press the ▲ or ▼ button to select Sound, then press the ENTER button. Auto Volume : Off Select Speaker : TV Speaker Sound Select : Main ► Sound Reset 2 Press the ▲ or ▼ button to select Sound Select, then press the ENTER button. 3 Press the ▲ or ▼ button to select Main or Sub, then press the ENTER button.
Channel Control Managing Channels Using this menu, you can Add/Delete or set Favorite channels and use the program guide for digital broadcasts. 1 Press the MENU button. Press the ▲ or ▼ button to select Channel, then press the ENTER button. Press the ▲ or ▼ button to select Channel List, then press the ENTER button. 2 Auto Program Clear Scrambled Channel Channel Viewing All Channels Show all currently available channels. To use the Channel List function, first run Auto Program (see page 21).
Erasing and Adding Channels You can delete or add a channel to display the channels you want. 2 3 Press the MENU button. Press the ▲ or ▼ button to select Channel, then press the ENTER button. Press the ▲ or ▼ button to select Channel List, then press the ENTER button. Signal Strength Press the ▲ or ▼ button to select All Channels. Shows all currently available channels. Press the ENTER button. 6 6-1 Press the ▲ or ▼ button to select a channel to delete, then press the TOOLS button.
Setting Your Favorite Channels You can set channels you watch frequently as favorites. Press the MENU button. Press the ▲ or ▼ button to select Channel, then press the ENTER button. Press the ▲ or ▼ button to select Channel List, then press the ENTER button. 2 Press the ◄ button to select Added Channels. 3 Press the ▲ or ▼ button to select All Channels, then press the ENTER button. Shows all currently available channels.
Press the MENU button. Press the ▲ or ▼ button to select Channel, then press the ENTER button. Press the ▲ or ▼ button to select Channel List, then press the ENTER button. 2 Press the ▲ or ▼ button to select a channel, then press the TOOLS button.
Confirming a Viewing Reservation You can view, modify or delete a reservation. Auto Program Press the MENU button. Press the ▲ or ▼ button to select Channel, then press the ENTER button. Press the ▲ or ▼ button to select Channel List, then press the ENTER button. Channel List Fine Tune Signal Strength 2 Press the ◄ button to select Added Channels. 3 ress the ▲ or ▼ button to select Programmed, then press the ENTER button. P You can view the program reservations.
Labeling Channels - Analog Channels can labeled so that their call letters appear whenever the channel is selected. 1 Auto Program Clear Scrambled Channel Channel Press the MENU button. Press the ▲ or ▼ button to select Channel, then press the ENTER button. Press the ▲ or ▼ button to select Channel List, then press the ENTER button. Channel List Fine Tune Signal Strength Press the ▲ or ▼ button to select the channel to be assigned a new name, then press the TOOLS button.
Clearing Scrambled Channels - Digital The Clear Scrambled Channel function is used to filter out scrambled channels after Auto Program is completed. This process may take up to 20-30 minutes. 1 Antenna Channel ➢ Press the MENU button. Press the ▲ or ▼ button to select Channel, then press the ENTER button. Press the ▲ or ▼ button to select Clear Scrambled Channel, then press the ENTER button. It searches scrambled channels, which are to be removed from the list. Press the EXIT button to exit.
Checking the Digital-Signal Strength Unlike analog channels, which can vary in reception quality from “snowy” to clear, digital (HDTV) channels have either perfect reception quality or you will not receive them at all. So, unlike analog channels, you cannot fine tune a digital channel. You can, however, adjust your antenna to improve the reception of available digital channels. 1 2 Press the ▲ or ▼ button to select Signal Strength, then press the ENTER button.
PC Display Using Your TV as a Computer (PC) Display Setting Up Your PC Software (Based on Windows XP) The Windows display-settings for a typical computer are shown below. The actual screens on your PC will probably be different, depending upon your particular version of Windows and your particular video card. However, even if your actual screens look different, the same basic set-up information will apply in almost all cases. (If not, contact your computer manufacturer or Samsung Dealer.
Setting up the TV with your PC How to Auto Adjust ➢ Preset: Press the SOURCE button to select PC mode. 1 Press the MENU button to display the menu. Press the ▲ or ▼ button to select Picture, then press the ENTER button. Press the ▲ or ▼ button to select Auto Adjustment, then press the ENTER button. Picture Use the Auto Adjust function to have the TV set automatically adjust the video signals it receives from the PC.
Changing the Screen Position Adjust the PC’s screen positioning if it does not fit the TV Screen. Preset: Press the SOURCE button to select PC mode. 1 Press the MENU button to display the menu. Press the ▲ or ▼ button to select Picture, then press the ENTER button. Press the ▲ or ▼ button to select Screen, then press the ENTER button.
Time Setting Setting the Time Setting the clock is necessary in order to use the various timer features of the TV. Also, you can check the time while watching the TV. (Just press the INFO button.) Option 1: Setting the Clock Manually 1 Plug & Play Language Setup Press the MENU button to display the menu. Press the ▲ or ▼ button to select Setup, then press the ENTER button. Press the ▲ or ▼ button to select Time, then press the ENTER button.
Option 2: Setting the Clock Automatically The Clock can be set automatically if you are receiving a digital signal. Press the MENU button to display the menu. Press the ▲ or ▼ button to select Setup, then press the ENTER button. Press the ▲ or ▼ button to select Time, then press the ENTER button.
Setting the On/Off Timer 1 Press the MENU button to display the menu. Press the ▲ or ▼ button to select Setup, then press the ENTER button. Press the ▲ or ▼ button to select Time, then press the ENTER button. Plug & Play Language Setup Use this feature to set the TV to turn on or off at a desired time. You must set the clock first.
Setting the Sleep Timer 1 Press the MENU button to display the menu. Press the ▲ or ▼ button to select Setup, then press the ENTER button. Press the ▲ or ▼ button to select Time, then press the ENTER button. Plug & Play Language Setup The sleep timer automatically shuts off the TV after a preset time (30, 60, 90, 120, 150 and 180 minutes).
Function Description Selecting a Menu Language 1 Plug & Play Setup Press the MENU button to display the menu. Press the ▲ or ▼ button to select Setup, then press the ENTER button. Press the ▲ or ▼ button to select Language, then press the ENTER button. Language : English ► Time Network Selection : Cable Cable Network Setup Wireless Network Setup V-Chip Caption External Settings Press the EXIT button to exit.
Using the V-Chip The V-Chip feature automatically locks out programs that are deemed inappropriate for children. The user must enter a PIN (personal ID number) before any of the V-Chip restrictions are set up or changed. ➢ V-Chip function is not available in HDMI, Component or PC mode. Setting Up Your Personal ID Number (PIN) 1 Cable Network Setup Wireless Network Setup Setup Press the MENU button to display the menu. Press the ▲ or ▼ button to select Setup, then press the ENTER button.
How to Enable/Disable the V-Chip 1 Press the MENU button to display the menu. Press the ▲ or ▼ button to select Setup, then press the ENTER button. V-Chip Enter PIN 2 Press the ▲ or ▼ button to select V-Chip, then press the ENTER button. The message Enter PIN will appear. Enter your 4 digit PIN number. * * * * 0~9 Enter PIN 3 The V-Chip screen will appear. To enable the V-Chip feature, press the ENTER button so that the V-Chip Lock field is On.
4 The TV Parental Guidelines screen will appear. Press the ▲ or ▼ button to select one of the six aged based categories: • TV-Y: All children. The themes and elements in this program are specifically designed for a very young audience, including children from ages two to six. • TV-Y7: Directed to older children. The themes and elements in this program may include mild physical or comedic violence, or may frighten children under the age of seven. • TV-G: General audience.
How to Set up Restrictions Using “MPAA Ratings” (G, PG, PG-13, R, NC-17, X, NR ) 1 Cable Network Setup Wireless Network Setup Setup The MPAA rating system uses the Motion Picture Association of America (MPAA) system, and its main application is for movies. When the V-Chip lock is on, the TV will automatically block any programs that are coded with objectionable ratings (either MPAA or TV-Ratings). V-Chip ► Caption Press the MENU button to display the menu.
How to Set up Restrictions Using “Canadian English” 1 Cable Network Setup Wireless Network Setup Setup Press the MENU button to display the menu. Press the ▲ or ▼ button to select Setup, then press the ENTER button. V-Chip ► Caption External Settings Entertainment : Off Energy Saving : Off PIP Software Upgrade 2 Press the ▲ or ▼ button to select V-Chip, then press the ENTER button. The message Enter PIN will appear. Enter your 4 digit PIN number.
How to Set up Restrictions Using “Canadian French” 1 Cable Network Setup Wireless Network Setup Setup Press the MENU button to display the menu. Press the ▲ or ▼ button to select Setup, then press the ENTER button. V-Chip ► Caption External Settings Entertainment : Off Energy Saving : Off PIP Software Upgrade 2 Press the ▲ or ▼ button to select V-Chip, then press the ENTER button. The message Enter PIN will appear. Enter your 4 digit PIN number.
Using the V-Chip for Digital channels Parental restriction information can be used while watching DTV channels. Press the MENU button to display the menu. Press the ▲ or ▼ button to select Setup, then press the ENTER button. Wireless Network Setup Setup 1 Cable Network Setup V-Chip ► Caption External Settings Entertainment : Off Energy Saving : Off PIP Software Upgrade 2 Press the ▲ or ▼ button to select V-Chip, then press the ENTER button. The message Enter PIN will appear.
How to Reset the TV after the V-Chip Blocks a Channel (“Emergency Escape”) If the TV is tuned to a restricted channel, the V-Chip will block it. The screen will go blank and the following message will appear: 1 Enter your PIN. To resume normal viewing, tune to a different channel using CH or CH button. Under certain conditions (depending on the rating of the local TV programs) the V-Chip might lock out all the channels.
Viewing Closed Captions (On-Screen Text Messages) - Digital The Digital Captions function operates on digital channels. 1 Wireless Network Setup V-Chip Setup Press the MENU button to display the menu. Press the ▲ or ▼ button to select Setup, then press the ENTER button. Caption ► External Settings 2 Press the ▲ or ▼ button to select Caption, then press the ENTER button. Entertainment : Off Energy Saving : Off PIP 3 Press the ENTER button to select Caption.
Viewing Closed Captions (On-Screen Text Messages) - Analog The Analog Caption function operates in either analog TV channel mode or when a signal is supplied from an external device. (Depending on the broadcasting signal, the Analog Caption function may operate on digital channels.) 1 Wireless Network Setup V-Chip Setup Press the MENU button to display the menu. Press the ▲ or ▼ button to select Setup, then press the ENTER button.
Adjusting the TV On/Off Melody Sound The TV power on/off melody sound volume can be adjusted. 1 V-Chip Caption Setup Press the MENU button to display the menu. Press the ▲ or ▼ button to select Setup, then press the ENTER button. 2 Press the ▲ or ▼ button to select External Settings, then press the ENTER button. External Settings Entertainment : Off Energy Saving : Off ► PIP Software Upgrade 3 Press the ENTER button to select Melody.
Setting the Entertainment mode The Entertainment mode enables you to select the optimal display and sound for sports, cinema and games. Press the MENU button to display the menu. Press the ▲ or ▼ button to select Setup, then press the ENTER button. 2 Press the ▲ or ▼ button to select Entertainment, then press the ENTER button. 3 Press the ▲ or ▼ button to select Off, Sports, Cinema or Game, then press the ENTER button.
Upgrading the Software Samsung may offer upgrades for your TV’s firmware in the future. Please contact the Samsung call center at 1-800-SAMSUNG to receive information about downloading upgrades and using a USB drive. Upgrades will be possible by connecting a USB drive to the USB port. 1 Insert a USB drive containing the firmware upgrade into the USB Upgrade Port on the side of the TV. ➢ TV side Panel Software can not be upgraded through the LAN connection.
Self diagnosis Picture Test If you think you have a picture problem, perform the picture test. Check the color pattern on the screen to see if the problem still exists. 1 Press the - button for more than 5 seconds. ➢ The Self Diagnostic Test menu appears. 2 Press the ▲ or ▼ button to select Picture Test, then press the ENTER button. ➢ The message Does the problem still exist with this test pattern? is displayed. 3 Press the ◄ or ► button to select Yes or No.
WISELINK PRO Using the WISELINK Pro Function Connecting a USB Device TV Side Panel You can view movies and photos and listen to music files stored on a USB Mass Storage Class (MSC) device. 1 Press the POWER button on the remote control or front panel. ➢ The TV is powered on. 2 Connect a USB device containing JPEG and/or MP3 files to the WISELINK jack (USB jack) on the side of the TV. ➣ If you enter the WISELINK Pro mode with no USB device connected USB Drive the message No external storage device found.
Using the WISELINK Pro Menu 1 Press the MENU button. Press the ▲ or ▼ button to select Application, then press the ENTER button. 2 Press the ▲ or ▼ button to select WISELINK Pro, then press the ENTER button. ➢ The WISELINK Pro menu is diplayed. WISELINK Pro 851.98MB/995.00MB Free SUM PHOTO Photo Music Movie Setup SUM Device Exit Press the W.LINK button on the remote control to display the WISELINK Pro menu.
Screen Display 1File(s) Selected5 Photo 1 Image001.jpg ★★★ Preference Monthly 2 SUM4 Nov3 Jan ▲ Timeline Device Favorites Setting Select Jump Option 6 1 Currently selected photo Shows the currently selected photo. 2 Current Sort Standard Press the ▲ or ▼ button to change the standard for sorting photos. (Monthly, Timeline, Color, Composition, Folder, Preference) The item that is selected as the sorting standing is highlighted in the Photo Information Window.
Sorting Photo List You can sort photos in the Photo List by a particular standard. 1 Press the W.LINK button on the remote control to display the WISELINK Pro menu. 2 P ress the ◄ or ► button to select Photo, then press the ENTER button. ➣ Photo files are displayed. 3 Press the ▲ or ▼ button to select a sorting standard. (Monthly, Timeline, Color, Composition, Folder, Preference) ➣ The photos are sorted according to the newly selected sorting standard.
Color You can play and sort photos by color. Photo To play photos by Color group 1 Select Color as the sorting standard in the Photo List. 2 Press the ◄ or ► button to select from the sublist of photos grouped by color. RETURN RETURN ➣ To move to the previous / next group, press the (REW) or (FF) button. Color 3 Press the TOOLS button. Press the ▲ or ▼ button to select Play EXIT EXIT Current Group. W.LINK W.LINK SUM 4 Press ENTER to play the selected group of photo files from the sublist.
Folder Sorts photos by folder. ➣ If there are many folders in USB, the photos files are shown in order in each folder. The photo file in the Root folder is shown first and the others are shown in alphabetical order by name. 1 Select Folder as the sorting standard in the Photo List. 2 Press the ◄ or ► button to select from the sublist of files grouped by folder. (REW) or ➣ To move to the previous / next group, press the (FF) button. 3 Press the TOOLS button.
Deleting the Photo files 1 Press the ◄ or ► button to select the desired photo in the Photo list. 2 Press the TOOLS button. 3 4 Photo Image001.jpg ▲ Play Current Group Rotate Delete Information Press the ▲ or ▼ button to select Delete, then press the ENTER button. ➢ The Delete this file? message appear. Press the ◄ or ►button to select OK, then press the ENTER button. ➢ The photo is deleted. ➢ When a read-only file is deleted, the Read-only file(s). Delete the file(s)? message appear.
Viewing a Photo or Slide Show Viewing a Slide Show Photo Image001.jpg 1 Press the W.LINK button on the remote control to display the WISELINK Pro menu. 2 Silde Show Play Current Group Rotate Delete Press the ◄ or ► button to move to Photo, then press the ENTER button. ➢ Photo files are displayed. 3 Press the ◄ or ► button to select the desired photo in the Photo list. 4 Press the TOOLS button. 5 ress the ▲ or ▼ button to select Slide Show, then press the ENTER P button.
Viewing a photo 1 Press the W.LINK button on the remote control to display the WISELINK Pro menu. 2 Press the ◄ or ► button to move to Photo, then press the ENTER button. ➢ Photo files are displayed. Press the ◄ or ► button to select the desired photo in the Photo list. Then press the Yellow button to select only one file. 3 4 Press the ENTER button over a photo icon. ➢ The currently selected photo is displayed in full screen. 1/1 Image001.jpg 440x440 2.
Zoom You can zoom into images in full screen mode. Press the ▲ or ▼ button to select Zoom, then press the ENTER button. Press the ◄ or ► button repeatedly to increase or decrease the Zoom effect. (x1 → x2 → x4) To move the enlarged photo image, press the ENTER button, then press the ▲/▼/◄/► buttons. ➢ Note that when the enlarged picture is smaller than the original screen size, the location change function doesn’t work. x2 ➢ The enlarged file is not saved.
Background Music Setting You can set the background music. Press the ▲ or ▼ button to select Background Music Setting, then press the ENTER button. ➣ If you turn off the Background Music, even if the Background Music Settings have been set up, the background music will not be played. Tools Stop Slide Show Rotate Zoom Slide Show Speed : Normal Background Music : Off Background Music Setting Picture Setting Sound Setting Information Move ➣ Music files must be loaded and playing to change the BGM mode.
Using the Music List This menu shows MP3 files from among the files saved on a USB memory device. 1 Press the W.LINK button on the remote control to display the WISELINK Pro menu. WISELINK Pro 851.98MB/995.00MB Free SUM Music Photo Music Movie Setup SUM 2 ress the ◄ or ► button to select Music, then press the ENTER P button. ➣ Music files are displayed.RETURN (Play) / ENTER button over a music icon to play the ➣ Press the EXIT music. W.
5 Item Selection Information Shows the number of music files that are selected by pressing the Yellow button. 6 Help Items • Red(Device) button: Selects a connected device. • Green(Favorites Setting) button: Changes the favorites setting for the selected music. Press this button repeatedly until the desired value appears. (Refer to page 85) • Yellow(Select) button: Selects music files from the music list. Selected music files are marked with a symbol on the left.
Artist Sorts music files by the artist. ➣ It sorts the music file by artist in alphabetical order. Select Artist as the sorting standard in the Music List. Press the ◄ or ► button to select from the sublist of files grouped in alphabetical order. (REW) or ➣ To move to the previous / next group, press the (FF) button. 3 Press the TOOLS button. W.LINK W.LINK 4 Press the ▲ or ▼ button to select Play Current Group. 5 Press ENTER to play the selected group of music files from the sublist.
Folder Sorts music files by the folder. ➣ If there are many folders in USB, the files are shown in order in each folder. The music file in the Root folder is shown first and the others are shown in alphabetical order by name. 1 Select Folder as the sorting standard in the Music List. 2 Press the ◄ or ► button to select from the sublist of files grouped by Folder. (REW) or ➣ To move to the previous / next group, press the (FF)RETURN button. 3 Press the TOOLS button. W.
Deleting the Music file 1 Press the ◄ or ► button to select the desired music file in the music list. 2 Press the TOOLS button. 3 Press the ▲ or ▼ button to select Delete, then press the ENTER button. ➣ The (for example) Delete this file? message appear. 4 Press the ◄ or ► button to select OK, then press the ENTER button. ➣ The music is deleted. ➣ When a read-only file is deleted, the Read-only file(s). Delete the file(s)? message appear. ➣ If you select Cancel, the deletion is cancelled.
Playing a Music File Playing a music file 1 Press the W.LINK button on the remote control to display the Music WISELINK Pro menu. Thanks 2 P ress the ◄ or ► button to select Music, then press the ENTER button. Jee ➣ Music files are displayed. ★★★ 3 Pressing the ◄ or ► button to select a music file to be played, then Energetic press the ENTER button. Title ➣ This menu only shows files with the MP3 file extension.
Playing the selected music files 1 Press the W.LINK button on the remote control to display the WISELINK Pro menu. 2 Press the ◄ or ► button to select Music, then press the ENTER button. 3 Press the ◄ or ► button to select the desired music file, then press the yellow button. Repeat the above operation to select multiple music files. the left of the selected music file.
Using the Movie List This menu shows Movies files and folders saved on an USB memory device. Movie List 1 Press the W.LINK button on the remote control to display the WISELINK Pro menu. 2 Press the ◄ or ► button to select Movie, then press the ENTER button. RETURN ➣ Movie files are displayed. (Play) / ENTER button over a movie icon to play the ➣ Press the EXIT movie. W.LINK ➣ When moving to a movie, loading may take a few seconds. At this CH LIST INFO point, the loading icon will appear on the screen.
3 View Groups Shows the sorting groups. The sorting group including the currently selected movie is highlighted. 4 Current Device Shows the currently selected device name. Press the Red button to select a device. 5 Item Selection Information Shows the number of movie files that are selected by pressing the Yellow button. 6 Help Items • Red(Device) button: Selects a connected device. • Green(Favorites Setting) button: Changes the favorites setting for the selected movie.
Timeline Sorts movies by time. ➣ It sorts and shows movies by date. It sorts by year and month from the earliest movie. 1 Select Timeline as the sorting standard in the Movie List. 2 Press the ◄ or ► button to select from the sublist of files grouped by Timeline. (REW) or ➣ To move to the previous / next group, press the (FF)RETURN button. 3 Press the TOOLS button. Press the ▲ or ▼ button to select Play Current Group. W.LINK EXIT W.
Deleting a Movie file 1 2 3 Press the ◄ or ► button to select the desired movie in the Movie list. Press the TOOLS button. Press the ▲ or ▼ button to select Delete, then press the ENTER button. ➣ The Delete this file? message appear. ➣ When a read-only file is deleted, the Read-only file(s). Delete the file(s)? message appear. 4 Press the ◄ or ►button to select OK, then press the ENTER button. ➣ The movie is deleted. ➣ If you select Cancel, the deletion is cancelled.
Playing a Movie File Playing a movie fi le 1 4 Press the W.LINK button on the remote control to display the WISELINK Pro menu. Press the ◄ or ► button to select Movie, then press the ENTER button. Pressing the ◄ or ► button to select a movie to be played, then press the ENTER button. RETURN ➣ The selected file is played. (Play) / ENTER button over a movie icon to play the ➣ Press the EXIT movie. RETURN W.
Playing the selected movie fi les 1 4 5 Press the W.LINK button on the remote control to display the WISELINK Pro menu. Press the ◄ or ► button to select Movie, then press the ENTER button. Press the ◄ or ► button to select the desired movie file, then press the yellow button. Repeat the above operation to select multiple movie files. RETURN ➣ The mark appears to the left of the selected movie file. Press the (Play) / RETURN ENTER button. EXIT file is played. ➣ Only the selected W.
Using the Setup Menu Setup displays the user settings of the WISELINK Pro menu. 1 Press the W.LINK button on the remote control to display the WISELINK Pro menu. 2 Press the ◄ or ► button to select Setup, then press the ENTER button. 3 Press the ▲ or ▼ button to select the desired option. (Slide Show Speed, Music Repeat Mode, Movie Repeat Mode, Screen Saver Run Time, Information, Safe Remove) 4 Press the ◄ or ► button to select the option, then press the ENTER button.
WISELINK Pro-DLNA Setting the DLNA Network DLNA allows you to watch videos and pictures saved on your PC on your TV through a network connection in Wiselink Pro mode. This removes the need to copy them to a USB storage device and then connect the device to your TV. To use DLNA, the TV must be connected to the network and the DLNA application must be installed on your PC.
Installing the DLNA Application To play content on the PC on the TV, you have to first install the application. System Requirements 1 Insert the Program CD supplied with this TV into your PC. 2 20MB of free hard disk space is needed for the program installation. ➣ If you share files, up to 20MB of hard disk drive space is required for each 100 files. ➣ If you cancel file sharing, the hard disk drive space used for the thumbnail information is also freed.
Using the DLNA Application The Program Screen Layout 1 8 2 3 4 5 6 7 1 Menus: The following application menus are provided : File, Share, Server, and Help. 2 Click to share the selected PC server folder (see page 100) 3 Click to cancel sharing (see page 100) 4 Click to refresh the PC folder and files. 5 Click to synchronize the share status (see page 101) 6 The folders and files of the PC to be shared are listed. 7 Folders shared by the user are listed.
File Property: Shows information on the selected file or folder. Method 1: Select a file or folder and select the File menu and then select the Property sub-menu. Method 2: Select a file or folder, right-click over the selected file or folder and then select Property from the pop-up menu. Exit: E xits the DLNA application. If you select Exit without applying the changes after changing the shared status, a message will appear asking if you want to apply the changed settings to the PC.
Share Sharing a Folder You can share a folder from your PC to the TV. The maximum number of folders that can be shared is 32. ➣Your PC will operate as a server to the TV. Method 1: Select a folder in My Computer, select the Share menu and then select the Share Folder sub-menu. Method 2: Select a folder in My Computer, right-click over the selected folder and then select Share Folder from the pop-up menu.
Applying the Current Settings Perform this when synchronization is necessary due to a new shared folder or canceling a shared folder. The Set Changed State menu applies changes to shared folders to the data saved with the PC share program. Since applying changes to the internal data is a timeconsuming process, this function enables users to apply changes to the data only when required. Until the Set Changed State menu is selected, the changed state of the shared folder is not applied to the server.
Server Server You can run or stop using your PC as a server. Start Server at Windows start You can determine whether to start the PC server automatically when Windows starts. Change server name You can rename the PC server. Enter a new name and click OK. The new name will appear at the top right of the window and will appear on the TV. Help Version The program version information message box appears. English - 102 BN68-01653A-Eng.
Using the DLNA Function Using the DLNA Menu DLNA (Digital Living Network Alliance) enables content saved on a DLNA server (usually your PC) connected to your TV or over a network to be played. Wiselink Pro enables playing content saved on a USB memory device connected to the TV, while DLNA enables playing content saved on a DLNA server (your PC) connected to your TV or over the network. The procedures to use the content are the same as those for WISELINK Pro.
Movie Movie ♦ Movie List – Sorting Movie List: Refer to page 90 – Viewing the Information: Refer to page 92 – Playing a Movie file: Refer to page 93 ABC.
Content Library Using the Content Library Application The Content Library enables you to view or play the built-in contents on the TV or stored on your USB device. ➣ The Delete, Move and Update functions will not work with the built-in content on the TV. Using the Content Library Menu WISELINK Pro 1 Press the MENU button. Press the ▲ or ▼ button to select Application, Anynet+ (HDMI-CEC) then press the ENTER button.
Using the Remote Control Button in Content Library Menu Button Operations Move the cursor and select an item. (Wheel) Select the currently selected item. (ENTER) Return to the previous menu. Stop the current function and return to the Content Library main menu. CH Stop Content Library mode and Returns to TV mode. Keys that provide functions are described on the corresponding page. VOL You can control the volume of the played content. Exit Content Library mode.
Cooking You can view various recipes that you can then easily follow step by step. Enjoy these contents which give you great ideas for meals. 1 2 Press the ◄ or ► button to select Cooking in the Content Library main menu. Then press the ENTER button. Content Library Cooking ress the ▲ or ▼ button to select Daily Meals, International or P Dessert, then press the ENTER button. • Daily Meals: Try special recipes for everyday meals.
Children This is educational and interactive content that children can watch repeatedly. Enjoy existing stories, songs and games with the Boowa and Kwala characters. 1 2 Press the ◄ or ► button to select Children in the Content Library main menu. Then press the ENTER button. ress the ▲ or ▼ button to select Story, Song or Play, then press the P ENTER button. • Story: You can watch storytelling content with the Boowa and Kwala characters.
Fitness This is beneficial health management content that provides stretching and massage exercises that can be enjoyed by the whole family. 1 Content Library Press the ◄ or ► button to select Fitness in the Content Library main menu. Then press the ENTER button. Fitness Gallery Cooking Setup 2 ress the ▲ or ▼ button to select Basic Stretches, Advanced P Stretches or Massage, then press the ENTER button.
Using Additional Content Using External USB Memory Storage You can download contents onto a USB memory device and play them on your TV. (The contents on the external USB device are played directly without being copied to the built-in Flash memory of the TV.) Playing and Exiting New Content 1 Press the Red button in the Content Library main menu. ➣ The USB Browser main screen is displayed. ➣ A list of files saved on the USB device is displayed.
Network Settings and InfoLink To access Samsung’s Infolink network feature, you must make one of the connections on the following pages. Network Connection - Cable LAN Connection for a DHCP Environment The procedures to set up the network using Dynamic Host Configuration Protocol (DHCP) are described below. Since an IP address, subnet mask, gateway, and DNS are automatically allocated when DHCP is selected, you do not have to enter them manually.
LAN Connection for Static IP Environment The procedures to set up the network using a static IP address are described below. You have to manually enter the IP address, subnet mask, gateway, and DNS that are provided by your Internet Service Provider (ISP). TV Rear Panel The LAN Port on the Wall 1 LAN Cable 1 Connect the [LAN] port on the rear panel of the TV and the LAN port on the wall using the LAN cable. You can connect the LAN via a Sharer (Router).
Network Connection - Wireless You can connect to the Samsung’s Infolink network wirelessly through a wireless IP sharer. TV Side Panel The LAN Port on the Wall Wireless IP sharer Wireless LAN Adapter for InfoLink LAN Cable 1 Connect the Samsung Infolink Wireless adapter into the Wiselink terminal of the TV. ➣ You must use the Samsung Wireless LAN Adapter for InfoLink(WIS-08BG) to use a wireless network. ➣ The Samsung Wireless LAN Adapter for InfoLink is sold separately.
Cable Network Setup ➣ First, the Network selection must be set to Cable. (See page 113) Auto Setup Setup If you connect the LAN cable and it supports DHCP, the Internet Protocol (IP) Settings are automatically configured. ➣ Please check if the LAN cable is connected. (See page 111) 1 Press the MENU button to display the menu. Time Press the ▲ or ▼ button to select Setup, then press the ENTER button.
Network Test You can test or confirm the network connection status after setting up the network. Network Selection Setup 1 Press the MENU button to display the menu. Press the ▲ or ▼ button to select Setup, then press the ENTER button. 2 Press the ▲ or ▼ button to select Cable Network Setup, then press the ENTER button.
Wireless Network Setup ➣ The menu is activated only if the Samsung Infolink Wireless adapter is connected. (See page 113) Auto Setup Network Selection Setup ➣ If you connect the LAN cable and it supports DHCP, the Internet Protocol (IP) Settings are automatically configured. ➣ The wireless IP sharer to be connected to this product must support DHCP. : Wireless Cable Network Setup Wireless Network Setup ► V-Chip Caption 1 Press the MENU button to display the menu.
Access Point Select You can select the IP sharer to use when using a wireless network. Network Selection : Wireless Cable Network Setup Setup 1 Press the MENU button to display the menu. Press the ▲ or ▼ button to select Setup, then press the ENTER button. 2 Press the ▲ or ▼ button to select Wireless Network Setup, then press the ENTER button.
Network Test You can test or confirm the network connection status after setting up the network. Network selection : Wireless Cable Network Setup Setup 1 Press the MENU button to display the menu. Press the ▲ or ▼ button to select Setup, then press the ENTER button. 2 Press the ▲ or ▼ button to select Wireless Network Setup, then press the ENTER button.
Using InfoLink You can view news, stock market and weather information services using SAMSUNG’s InfoLink service. ➣ Set up the network. (Refer to pages 111~118) ➣ Information provided by USA TODAY via Infolink is for the United States only. Information for other countries is not provided. Activating InfoLink Anynet+ (HDMI-CEC) 2 Press the ▲ or ▼ button to select InfoLink, then press the ENTER button.
Using the Weather Service 1 Press the INFO.L button on the remote control. 2 Press the ◄ or ► button to move to the Weather service and press the ENTER button. Set up the Region 3 Press Yellow button. Input the postal (zip) code of the region by pressing the number buttons on the remote, then press the ENTER button. ➣ You can check the weather of the selected region. ➣ If you select the Weather service when no region is set, a message will appear asking if you want to set up the region.
Using the Stock Service 1 Press the INFO.L button on the remote control. 2 Press the ◄ or ► button to move to the Stock service and press the ENTER button. 3 Press the Red button while using the service to change the Stock service option. 4 Press ▲ or ▼ button and select Stock service option, then press the ENTER button. 1/2 Wed 6:09 Stock NASDAQ ▲ 21.51 2713.50 0.80% Quotes delayed at least 15 minutes. Data provided by interastive Data.
InfoLink Setup 1 Press the INFO.L button on the remote control. 2 Press the ◄ or ► button to select Setup, then press the ENTER button. 3 4 ress the ▲ or ▼ button to select the desired option. (Auto Launch, P Display Time, Font Size, Background Color, InfoLink’s Position) Press the ▲ or ▼ button to select an option, then press the ENTER button • Auto Launch: Determines whether to launch InfoLink automatically when the TV is turned on. You can select either Off or On.
Product Guide Application The Product Guide gives you information on the most important features of this TV. 1 Press the MENU button to display the menu. Press the ▲ or ▼ button to select Application, then press the ENTER button. 2 Press the ▲ or ▼ button to select Product Guide, then press the ENTER button. 3 ress the ◄ or ► button to select a Guide (Picture Quality, P Entertainment or Connectivity) and press the ENTER button.
About Anynet+ What is Anynet+? Anynet+ is a function that enables you to control all connected Samsung devices that support Anynet+ with your Samsung TV’s remote. Connecting Anynet+ Devices The Anynet+ system can be used only with Samsung devices that have the Anynet+ feature. To be sure your Samsung device has this feature, check if there is an Anynet+ logo on it. To connect to a TV Anynet+ Device Anynet+ Device 1 TV HDMI 1. Cable HDMI 1. Cable Anynet+ Device Anynet+ Device 4 HDMI 1.
Setting Up Anynet+ The following settings help set the Anynet+ functions. To use the Anynet+ Function, Anynet+ (HDMI-CEC) must be set to On 1 2 Press the ▲ or ▼ button to select Anynet+ (HDMI-CEC), then press the ENTER button. WISELINK Pro Application Press the MENU button. Press the ▲ or ▼ button to select Application, then press the ENTER button. Anynet+ (HDMI-CEC) 3 Press the ▲ or ▼ button to select Setup, then press the ENTER button.
Scanning and Switching between Anynet+ Devices 1 Press the TOOLS button. Press the ENTER button to select Anynet+ (HDMI-CEC). 2 Press the ▲ or ▼ button to select Device List, then press the ENTER button. ➢ Anynet+ devices connected to the TV are listed. If you cannot find a device you want, press the red button to scan for devices. ➢ Only when you set Anynet+ (HDMI-CEC) to On in the Setup menu, the Device List menu appears.
Anynet+ Menu The Anynet+ menu changes depending on the type and status of the Anynet+ devices connected to the TV. Anynet+ Menu Description View TV Anynet+ mode changes to TV broadcast mode. Device List Shows the Anynet+ device list. (Device_Name) Menu Shows the connected device menus. E.g. If a DVD recorder is connected, the disc menu of the DVD recorder will appear. (Device_Name) Operation Shows the play menu of the connected device. E.g.
Listening through a Receiver (Home theater) You can listen to sound through a receiver instead of the TV speaker. 1 Press the TOOLS button. Press the ENTER button to select Anynet+ (HDMI-CEC). 2 Press the ▲ or ▼ button to select Receiver. Press the ◄ or ► button to select On or Off. View TV Device List Recording : DVDR DVDR Operation Receiver Setup ◄ On ► 3 Press the EXIT button to exit.
Appendix Troubleshooting If the TV seems to have a problem, first try this list of possible problems and solutions. If none of these troubleshooting tips apply, call your nearest Samsung service center. Problem Poor picture quality. Poor sound quality. No picture or sound. No sound or sound is too low at maximum volume. Picture rolls vertically. There is a problem with the picture. There is a problem with the Sound. The TV operates erratically. The TV won’t turn on.
Auto Wall-mount adjustment (Sold separately) (PN50A 0T1F) Once the auto wall mount is installed, the position of your TV can be easily adjusted. Auto Wall-Mount TV Rear Panel EX-LINK Cable (Not supplied) Entering the menu 1 Press the ▲, ▼, ◄ or ► button on your remote control. ➢ The Wall Mount Adjustment screen is displayed. ➢ If the Wall Mount Adjustment screen is not displayed when clicking on a direction button while watching your TV, use the menu to display that screen.
Wall Mount Kit Specifications (VESA) Install your wall mount on a solid wall perpendicular to the floor. When attaching to other building materials, please contact your nearest dealer. If installed on a ceiling or slanted wall, it may fall and result in severe personal injury. Product Family inch VESA Spec.
Preparing before installing Wall- Mount on the wall Case A. Installing SAMSUNG Wall-Mount Case B. Installing other company’s Wall-Mount 1 Install Wall Mount with the torque range of 15kgf·cm or less. Make sure that parts can be damaged if the torque is out of the specified range. 2 Accessory Kit contains Holder–Ring [①] for installing other company’s Wall-Mount on Samsung TV.
Specifications Model Name PN50A760T1F PN58A760T1F PN63A760T1F 50 inch (49.9 inches measured diagonally) 58 inch (58.0 inches measured diagonally) 63 inch (62.9 inches measured diagonally) PC Resolution 1920 x 1080 @ 60 Hz 1920 x 1080 @ 60 Hz 1920 x 1080 @ 60 Hz Sound (Output) 10W x 2 15W x 2 15W x 2 48.8 x 30.2 x 3.8 inches (1240.0 x 765.5 x 96.0 mm) 48.8 x 32.7 x 12.4 inches (1240.0 x 829.8 x 314.5 mm) 55.8 x 34.1 x 4.0 inches ( 1417.5 x 866.0 x 100.4 mm) 55.8 x 36.6 x 13.6 inches ( 1417.
Dimensions (PN50A760T1F) 48.8 43.8 30.2 32.7 TOP VIEW FRONT VIEW JACK PANEL DETAIL 7.2 x 3.7 inches SIDE VIEW REAR VIEW NOTE: All drawings not necessarily to scale. Some dimensions are subject to change without prior notice. Refer to dimensions on each unit prior to performing any carpentry. Not responsible for typographical or printed errors. © 2008 Samsung Electronics America, Inc. English - 134 BN68-01653A-Eng.
Dimensions (PN58A760T1F) 55.8 51.7 28.6 TOP VIEW 34.1 FRONT VIEW JACK PANEL DETAIL 7.2 x 3.7 inches 4.0 SIDE VIEW REAR VIEW NOTE: All drawings not necessarily to scale. Some dimensions are subject to change without prior notice. Refer to dimensions on each unit prior to performing any carpentry. Not responsible for typographical or printed errors. © 2008 Samsung Electronics America, Inc. English - 135 BN68-01653A-Eng.
Dimensions (PN63A760T1F) 60.3 55.1 31.1 TOP VIEW 36.7 FRONT VIEW JACK PANEL DETAIL 7.2 x 3.7 inches 3.9 SIDE VIEW REAR VIEW NOTE: All drawings not necessarily to scale. Some dimensions are subject to change without prior notice. Refer to dimensions on each unit prior to performing any carpentry. Not responsible for typographical or printed errors. © 2008 Samsung Electronics America, Inc. English - 136 BN68-01653A-Eng.
The GNU General Public License (GPL) Version 2, June 1991 Copyright (C) 1989, 1991 Free Software Foundation, Inc. 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA Everyone is permitted to copy and distribute verbatim copies of this license document, but changing it is not allowed. Preamble The licenses for most software are designed to take away your freedom to share and change it.
These requirements apply to the modified work as a whole. If identifiable sections of that work are not derived from the Program, and can be reasonably considered independent and separate works in themselves, then this License, and its terms, do not apply to those sections when you distribute them as separate works.
9. The Free Software Foundation may publish revised and/or new versions of the General Public License from time to time. Such new versions will be similar in spirit to the present version, but may differ in detail to address new problems or concerns. Each version is given a distinguishing version number.
GNU Lesser General Public License (LGPL) Version 2.1, February 1999 Copyright (C) 1991, 1999 Free Software Foundation, Inc. 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA Everyone is permitted to copy and distribute verbatim copies of this license document, but changing it is not allowed. [This is the first released version of the Lesser GPL. It also counts as the successor of the GNU Library Public License, version 2, hence the version number 2.1.
TERMS AND CONDITIONS FOR COPYING, DISTRIBUTION AND MODIFICATION 0. This License Agreement applies to any software library or other program which contains a notice placed by the copyright holder or other authorized party saying it may be distributed under the terms of this Lesser General Public License (also called “this License”). Each licensee is addressed as “you”.
5. A program that contains no derivative of any portion of the Library, but is designed to work with the Library by being compiled or linked with it, is called a “work that uses the Library”. Such a work, in isolation, is not a derivative work of the Library, and therefore falls outside the scope of this License.
10. Each time you redistribute the Library (or any work based on the Library), the recipient automatically receives a license from the original licensor to copy, distribute, link with or modify the Library subject to these terms and conditions. You may not impose any further restrictions on the recipients’ exercise of the rights granted herein. You are not responsible for enforcing compliance by third parties with this License. 11.
END OF TERMS AND CONDITIONS How to Apply These Terms to Your New Libraries If you develop a new library, and you want it to be of the greatest possible use to the public, we recommend making it free software that everyone can redistribute and change. You can do so by permitting redistribution under these terms (or, alternatively, under the terms of the ordinary General Public License). To apply these terms, attach the following notices to the library.
This page is intentionally left blank. BN68-01653A-Eng.
Información importante sobre la garantía relativa al formato de visualización del televisor Las pantallas PDP con formato de pantalla panorámica (16:9, la relación de aspecto ancho:alto de la pantalla) están diseñadas principalmente para visualizar vídeos de movimiento de formato panorámico. En estas pantallas debe ver las las imágenes en el formato 16:9 de pantalla panorámica o ampliadas para llenar la pantalla si el modelo tiene esta opción, y en movimiento constante.
Instrucciones para el usuario Retención de imágenes en la pantalla No deje imágenes fijas visibles (como las de un videojuego) en el panel de la pantalla de plasma durante mucho tiempo, ya que se podría producir la retención de la imagen en la misma. Este fenómeno de retención de imágenes también se denomina “quemadura de pantalla”. Para evitar dicha retención de la imagen, consulte la página 32 de este manual para reducir el grado de brillo y contraste de la pantalla al mostrar una imagen fija.
Índice Información general Español ■ ■ ■ ■ ■ ■ Características.......................................................................... 5 Accesorios................................................................................. 5 Aspecto general del panel de control........................................ 6 Aspecto general del panel de conexiones................................. 7 Mando a distancia.....................................................................
Información general Características • • • • • Valores ajustables de la imagen que se pueden almacenar en la memoria del televisor. Temporizador automático para encender o apagar el televisor. Temporizador de desconexión especial. Función V-chip. Excelente interfaz digital y capacidad de trabajo en red: El sintonizador digital HD incorporado permite ver las emisiones HD que no exigen una suscripción sin que sea necesario disponer de un receptor de televisión por cable/satélite (decodificador).
Aspecto general del panel de control Botones de la parte inferior derecha del panel Los botones de la parte inferior derecha del panel controlan las funciones básicas del televisor, incluidos los menús en pantalla. Para utilizar las funciones más avanzadas debe usarse el mando a distancia. ➢ El color y la forma del producto pueden variar según el modelo.
Aspecto general del panel de conexiones Tomas del panel posterior Use las tomas del panel posterior para conectar componentes de A/V que estarán disponibles permanentemente, como un vídeo o un reproductor de DVD. Si desea más información sobre la conexión del equipo, consulte las páginas 9-15. El color y la forma del producto pueden variar, según el modelo. 1 Botón de encendido Conexión para el cable de alimentación suministrado. 2 DIGITAL AUDIO OUT (OPTICAL) Conexión para un componente de audio digital.
Mando a distancia Puede utilizar el mando a una distancia del televisor de hasta 7 metros. 1 POWER usar para controlar la grabación en las grabadoras de Samsung con la función Anynet+.) ^ ON/OFF Pulse este botón para activar la luz de fondo de los botones del mando a distancia. Esta función es útil cuando se usa de noche o en una sala a oscuras. (El uso del mando a distancia con los botones de iluminación ON/OFF ( ) activados reduce el tiempo de uso de las pilas.) Enciende y apaga el televisor.
Instalación de las pilas en el mando a distancia 1 Levante la tapa de la parte posterior del mando a distancia, como se muestra en la ilustración. 2 Instale dos baterías de tamaño AAA. ➢ Asegúrese de que los extremos “+” y “-” de las pilas concuerdan con el diagrama del interior del compartimiento. ➢ El uso del mando a distancia con los botones de iluminación ON/OFF( ) establecidos en Encendidoreduce el tiempo de uso de las pilas. 3 Cierre la tapa, como se muestra en la ilustración.
Conexión de TV por cable Para conectar a un sistema de TV por cable, siga estas instrucciones. Cable sin decodificador de cable 1 Conecte el cable de entrada al terminal ANT IN de la parte posterior del televisor. ➢ Dado que el televisor tiene previsto el uso de televisión por cable, no se necesita un decodificador para ver canales de cable no codificados. ANT IN Conexión al decodificador de cable que decodifica todos los canales 1 Busque el cable conectado al terminal ANT OUT del decodificador.
Conexión de un DVD/Blu-Ray o receptores de televisión por cable/satélite (decodificadores) a través de HDMI Esta conexión sólo se puede realizar si hay una toma de salida de HDMI en el dispositivo externo. Esta conexión proporciona una imagen de la mayor calidad. 1 Conecte un cable HDMI entre el terminal HDMI IN (1, 2, 3 o 4) del televisor y el terminal HDMI del DVD/Blu-Ray o del receptor de televisión por cable/satélite (decodificador).
Conexión de un DVD/Blu-Ray o receptores de televisión por cable/satélite (decodificadores) a través de los cables de componentes Las tomas del panel posterior del televisor facilitan la conexión al televisor de un DVD/Blu-Ray/receptor de cable/ satélite (decodificador). 1 Conecte los cables de los componentes entre los terminales COMPONENT IN (1 o 2) [Y, PB, PR] del televisor y los terminales COMPONENT [Y, PB, PR] del DVD/Blu-Ray o receptor de televisión por cable/satélite (decodificador).
Conexión de un aparato de vídeo Conexión de vídeo En estas instrucciones se asume que ya ha conectado el TV a una antena o a un sistema de TV por cable (de acuerdo con las instrucciones de las páginas y 10). Ignore el paso 1 si aún no ha conectado una antena o un sistema de cable. 1 Desenchufe el cable o la antena de la parte posterior del TV. Conecte el cable o la antena al terminal ANT IN en la parte posterior del aparato de vídeo.
Conexión de un sistema de audio digital Las tomas del panel posterior del televisor facilitan la conexión de un sistema de audio digital (Home Cinema/ Receptor) al televisor. 1 Conecte un cable óptico entre el terminal DIGITAL AUDIO OUT (OPTICAL) del televisor y el terminal Digital Audio Input (OPTICAL) del sistema de audio digital.
Conexión a un PC Uso del cable D-Sub 1 Conecte un cable D-Sub entre el terminal PC IN [PC] del televisor y el terminal de salida PC del ordenador. Conecte un cable de audio PC entre el terminal PC IN [AUDIO] del televisor y el terminal de salida de audio de la tarjeta de sonido del ordenador.
Funcionamiento Encendido y apagado del televisor Pulse el botón POWER del mando a distancia. También puede usar el botón de encendido del televisor. ➢ Puede tardar unos segundos en verse una imagen completa. Función Plug & Play La primera vez que se enciende el nuevo televisor, se debe elegir la configuración básica del idioma, fuente de entrada y canales, y la hora del día por medio de la función plug and play. El televisor almacenará esta configuración en la memoria.
5 El televisor empezará a memorizar todos los canales disponibles. Una vez guardados todos los canales disponibles, el televisor inicia la eliminación de los canales codificados (ver página 47). Vuelve a mostrarse el menú Prog. Auto. Pulse el botón ENTER cuando se complete la memorización de canales. Aparece el menú Modo Reloj. ➢ Para detener la búsqueda antes de que finalice, pulse el botón ENTER con la opción de detener seleccionada. Plug & Play La programación automática está en progreso.
1 Pulse el botón MENU para mostrar el menú. Pulse los botones ▲ o ▼ para seleccionar Configuración; a continuación pulse el botón ENTER. Configuración Si desea reiniciar esta función... Plug & Play Idioma Tiempo Selección de red 2 Pulse el botón ENTER para seleccionar Plug & Play. Si desea más detalles sobre las opciones de configuración, consulte las páginas 16 y 17. ➢ La función Plug & Play está disponible sólo en el modo TV.
Ajuste del volumen Utilización de los botones de volumen RETURN 1 RETURN Pulse los botones VOL o VOL para subir o bajar el volumen. EXIT W.LINK Para subir el volumen gire la rueda hacia la derecha cuando se muestre la ➢ EXIT CH LIST INFO ventana deW.LINKcontrol del volumen. Para bajar el volumen gire la rueda hacia la TOOLS izquierda. CH LIST INFO TOOLS Utilización del botón Mute Puede interrumpir el sonido en cualquier momento pulsando el botón MUTE. 1 Pulse el botón MUTE y se corta el sonido.
Uso del botón de la luz de fondo del mando a distancia Use esta función en un entorno oscuro donde no sea posible ver los botones del mando a distancia con claridad. 1 Pulse el botón de iluminación ON/OFF . Si se pulsa el botón ON/OFF se cambia entre Activado y Desactivado. Si está en activado, el botón de iluminación se enciende un momento. Si se pulsa un botón del mando a distancia, la iluminación del botón se enciende un momento.
Configuración sencilla 1 Pulse el botón TOOLS del mando a distancia. 2 Herramientas Anynet+(HDMI-CEC) Sonido Multi-track : Estéreo Tamaño de la imagen : 16:9 Imagen Modo : Normal Sonido Modo : Favorito Temporizador : Apagado Agregar a Favoritos Cambiar a Cable Pulse los botones ▲ o ▼ para seleccionar Cambiar a Cable o Cambiar a Aereos. 3 Pulse el botón ENTER.
Para seleccionar la fuente Úselo para seleccionar TV u otras fuentes de entrada externas como reproductores de DVD/Blu-Ray o receptores de cable y satélite (decodificadores), conectados al televisor. Permite seleccionar la fuente de entrada que se prefiera. Pulse el botón MENU para mostrar el menú. Pulse los botones ▲ o ▼ para seleccionar Entrada; a continuación pulse el botón ENTER. Pulse el botón ENTER para seleccionar Lista de Origen.
Control de la imagen Cambio del formato de la imagen Puede seleccionar el tipo de imagen que mejor cumpla sus requisitos de visualización. 1 Imagen Pulse el botón MENU para mostrar el menú. Pulse el botón ENTER para seleccionar Imagen. Modo : Normal Luz de la celda :7 Contraste : 95 Brillo : 45 Definicón : 50 Color : 50 Tinte (V/R) : V50/R50 ► Configuración detallada Imagen 2 Pulse el botón ENTER para seleccionar Modo. Pulse los botones ▲ o ▼ para seleccionar Dinámico, Normal o Cine.
Ajuste de la configuración detallada Los nuevos televisores Samsung permiten una configuración más precisa de la imagen que los modelos anteriores. Consulte más adelante cómo realizar una configuración detallada. Activación de la configuración detallada Pulse el botón MENU para ver el menú. Pulse el botón ENTER para seleccionar Imagen. 2 Pulse el botón ENTER para seleccionar Modo. Pulse los botones ▲ o ▼ para seleccionar Normal o Película, a continuación, pulse el botón ENTER.
Cambio del espacio de color Espacio de color es una matriz de color compuesta por los colores rojo, verde y azul. Seleccione su gama favorita de color y disfrute de unos colores auténticamente naturales. 10 P ulse los botones ▲ o ▼ para seleccionar Espacio de color, y pulse el botón ENTER. Configuración detallada Ajuste del negro : Apagado Contraste Dinám.
Activación del balance de blanco Se puede ajustar la temperatura del color para conseguir colores más naturales. Configuración detallada Ajuste del negro 17 P ulse los botones ▲ o ▼ para seleccionar Balanceo de blanco y, a continuación, pulse el botón ENTER. 18 Seleccione la opción adecuada pulsando los botones ▲ o ▼ y, a continuación, pulse el botón ENTER. : Apagado Contraste Dinám.
Activación de xvYCC Si ajusta el modo xvYCC como Encendido, se aumenta el detalle y el espacio de color mientras se ven películas desde un dispositivo externo (por ejemplo, un reproductor de DVD) conectado a los terminales HDMI o Component IN. 24 P ulse los botones ▲ o ▼ para seleccionar xvYCC y, a continuación, pulse el botón ENTER. Configuración detallada Contraste Dinám.
Cambio del tamaño de la pantalla Es posible que alguna vez desee cambiar el tamaño de la imagen en la pantalla. El televisor se suministra con seis opciones de tamaño de la pantalla, cada una diseñada para que funcione lo mejor posible con tipos específicos de entrada de vídeo. Es posible que el receptor de cable o satélite tenga también su propia gama de tamaños de pantalla. Sin embargo, en general, debe ver el televisor en el modo 16:9 tanto como sea posible.
Ajustar 16:9 Establece la imagen en modo panorámico 16:9. Zoom1 Tamaño de pantalla cuando se amplía verticalmente el formato amplio. Zoom2 Tamaño de pantalla cuando se amplía verticalmente el formato Zoom1. Ajuste ancho Amplía la relación de aspecto de la imagen para que se ajuste al ancho total de la pantalla. 4:3 Ajusta la imagen en modo normal 4:3.
DNIe (motor digital de imágenes naturales) Este televisor incluye la función DNIe con el fin de conseguir una gran calidad visual. Si ajusta DNIe en Encendido, podrá ver la pantalla con la función DNIe activada. 1 Siga las instrucciones 1 y 2 de Activación de las opciones de la imagen. (Consulte la página 27) 2 ulse los botones ▲ o ▼ para seleccionar DNIe y, a continuación, pulse el P botón ENTER. 3 ulse los botones ▲ o ▼ para seleccionar Apagado o Encendido o pulse el P botón ENTER.
Configuración de la función del modo de película El televisor se puede configurar para detectar automáticamente y procesar las señales de las películas procedentes de todas las fuentes y ajustar la imagen para conseguir una calidad óptima. 1 Siga las instrucciones 1 y 2 de Activación de las opciones de la imagen. (Consulte la página 27) Opciones de imagen Tono Color : Normal Tamaño : 16:9 Digital NR : Auto DNle : Apagado N.
Reducción de los efectos de una pantalla quemada Si la pantalla se ha quemado, puede seleccionar una pantalla blanca o un patrón de señal para que le ayude a retirar los elementos quemados. 1 Siga las instrucciones 1 y 2 de Activación de las opciones de la imagen. (consulte la página 27) Opciones de imagen Tamaño : 16:9 Digital NR : Auto DNle : Apagado N.
Prevención del desgaste de la pantalla Esta pantalla está equipada con tecnología de prevención para reducir la posibilidad de que se queme. Esta tecnología permite definir el movimiento de la imagen arriba o abajo (línea vertical) y de lado a lado (punto horizontal). El ajuste del tiempo permite programar intervalos temporales entre los movimientos de la imagen en minutos. 1 Siga las instrucciones 1 y 2 de Activación de las opciones de la imagen.
Reajuste de los valores de la imagen a los valores predefinidos de fábrica 2 P ulse los botones ▲ o ▼ para seleccionar Reinicio de la imagen y pulse el botón ENTER. Pulse los botones ◄ o ► para seleccionar Reinic. modo imagen o Cancelar y, a continuación, pulse el botón ENTER. Pulse el botón EXIT para salir. ➢ Configuración detallada Opciones de imagen Imagen 1 Para seleccionar el modo de imagen deseado, siga las instrucciones 1 y 2 de Cambio del formato de la imagen.
Cambio de la posición de la ventana PIP 4 Pulse los botones ▲ o ▼ para seleccionar Posición y, a continuación, pulse el botón ENTER. Pulse los botones ▲ o ▼ para seleccionar la posición de la ventana PIP que desea y pulse el botón ENTER. ➢ En los modos Ventana Doble ( ) y Ancho Doble ( ) la opción Posición no se puede seleccionar.
Control del sonido Cambio del estándar de sonido Puede seleccionar el modo de sonido que se ajuste al programa que se está viendo. 1 Sonido Pulse el botón MENU para mostrar el menú. Pulse los botones ▲ o ▼ para seleccionar Sonido; a continuación pulse el botón ENTER. Modo : Favorito ► Ecualizador Pulse el botón EXIT para salir. • • • • • Sonido 2 Pulse el botón ENTER para seleccionar Modo.
4 Pulse los botones ▲ o ▼ para elegir la frecuencia que desee ajustar. Pulse los botones ◄ o ► para aumentar o reducir el nivel de una frecuencia concreta. • Modo: Selecciona el modo de sonido entre los valores predefinidos. • Balance L/R: Ajusta el balance entre los altavoces izquierdo y derecho. • Ajuste del ancho de banda (100Hz, 300Hz, 1kHz, 3kHz, 10kHz): Para ajustar el nivel de las diferentes frecuencias de ancho de banda.
Elección del idioma preferido El sistema de transmisión de TV digital permite transmitir simultáneamente muchas pistas de audio (por ejemplo, traducciones simultáneas del programa en otros idiomas). 1 Equalizer Trusurround SRS XT Sonido Pulse el botón MENU para mostrar el menú. Pulse los botones ▲ o ▼ para seleccionar Sonido; a continuación pulse el botón ENTER. 2 Pulse los botones ▲ o ▼ para seleccionar Idioma preferido y, a continuación, pulse el botón ENTER.
Control automático de volumen Reduce las diferencias en el nivel de volumen entre las emisoras. 1 Sonido Pulse el botón MENU para mostrar el menú. Pulse los botones ▲ o ▼ para seleccionar Sonido; a continuación pulse el botón ENTER. 2 Pulse los botones ▲ o ▼ para seleccionar Vol. Auto.; a continuación pulse el botón ENTER. Pulse el botón EXIT para salir. : Español Sonido Multi-track : Estéreo Vol. Auto : Apagado Seleccionar altavoz : Altavoz de TV Sel.
Audición del sonido de la imagen secundaria (PIP) Cuando se activa la función PIP se puede escuchar el sonido de la imagen secundaria (PIP). 1 Sonido Pulse el botón MENU para mostrar el menú. Pulse los botones ▲ o ▼ para seleccionar Sonido; a continuación pulse el botón ENTER. Vol.Auto : Apagado Seleccionar altavoz : Altavoz de TV Sel. Sonido : Principal ► Reinicio del sonido 2 Pulse los botones ▲ o ▼ para seleccionar Sel. Sonido y, a continuación, pulse el botón ENTER.
Control de los canales Gestión de los canales Con este menú puede agregar y borrar los canales o configurarlos como favoritos y usar la guía de programas de las emisoras digitales. 1 Pulse el botón MENU para mostrar el menú. Pulse los botones ▲ o ▼ para seleccionar Canal; a continuación pulse el botón ENTER. Pulse los botones ▲ o ▼ para seleccionar Lista de canales y, a continuación, pulse el botón ENTER. 2 Prog.
Supresión y adición de canales Puede suprimir o añadir un canal para que se muestren los canales que desee. Pulse el botón MENU. Pulse los botones ▲ o ▼ para seleccionar Canal; a continuación pulse el botón ENTER. Pulse los botones ▲ o ▼ para seleccionar Lista de canales y, a continuación, pulse el botón ENTER. Pulse el botón ◄ para seleccionar Canales agregados. 3 Pulse los botones ▲ o ▼ para seleccionar Todos los canales.
Prog. Auto Borrar canal encriptado Canal Ajuste de los canales favoritos Puede configurar como favoritos los canales que vea con más frecuencia. 1 Pulse el botón MENU. Pulse los botones ▲ o ▼ para seleccionar Canal y, a continuación, pulse el botón ENTER. Pulse los botones ▲ o ▼ para seleccionar Lista de canales y, a continuación, pulse el botón ENTER. Lista de canales Sintonia Fina Intensidad señal 2 Pulse el botón ◄ para seleccionar Canales agregados.
Pulse el botón MENU. ulse los botones ▲ o ▼ para seleccionar Canal y, a continuación, pulse el P botón ENTER. Pulse los botones ▲ o ▼ para seleccionar Lista de canales y, a continuación, pulse el botón ENTER. 2 ulse los botones ▲ o ▼ para seleccionar un canal como favorito y pulse el P botón TOOLS. Borrar canal encriptado Intensidad señal 3 P ulse los botones ▲ o ▼ para seleccionar Visual. tempor. y pulse el botón ENTER. Aparece la pantalla Reservar un programa visualización de la hora.
Confirmación de una reserva de visualización Se puede ver, cambiar o borrar una reserva. Pulse el botón MENU. Pulse los botones ▲ o ▼ para seleccionar Canal y, a continuación, pulse el botón ENTER. Pulse los botones ▲ o ▼ para seleccionar Lista de canales y, a continuación, pulse el botón ENTER. Pulse el botón ◄ para seleccionar Canales agregados. 3 Pulse los botones ▲ o ▼ para seleccionar Programados, y pulse el botón ENTER. Puede ver las reservas de programas.
1 3 Intensidad señal Pulse los botones ▲ o ▼ para seleccionar Editar nombre de canal y pulse el botón ENTER. ulse los botones ▲/▼/◄/► para seleccionar una letra y, a continuación, pulse P el botón ENTER. • • • • • Lista de canales Sintonia Fina 6 Aire Botones numéricos: Permiten introducir números. Botón rojo: Permite cambiar entre letras y caracteres en inglés. Botón verde: Permite borrar una letra o un carácter introducidos. Botón amarillo: Permite introducir un espacio vacío.
Supresión de los canales codificados digitales La función Borrar canal encriptado se usa para filtrar los canales codificados después de realizar una búsqueda automática. Puede tardar de 20 a 30 minutos. 1 Antena Borrar canal encriptado ► Lista de canales Sintonia Fina Intensidad señal Para detener la búsqueda de canales codificados: Pulse el botón ENTER para seleccionar Detener. Pulse el botón ◄ para seleccionar Sí y, a continuación, pulse el botón ENTER.
Comprobación de la potencia de la señal digital A diferencia de los canales analógicos, cuya calidad de recepción puede variar desde “nebuloso” a claro, los canales digitales (HDTV) tienen una calidad de recepción perfecta o no se reciben en absoluto. Por tanto, a diferencia de los canales analógicos, no puede sintonizar ningún canal digital. Puede, no obstante, ajustar la antena para mejorar la recepción de los canales digitales disponibles.
Pantalla del PC Utilización del televisor como pantalla del PC Configuración del software del PC (basado en Windows XP) A continuación se muestra la configuración de visualización de Windows para un ordenador típico. Probablemente la pantalla real de su PC sea distinta; dependerá de la versión concreta de Windows y de la tarjeta de vídeo que tenga. Aunque las pantallas reales sean diferentes, la información de configuración básica que se aplica en casi todos los casos es la misma.
Ajuste del televisor con el ordenador Cómo realizar un ajuste automático 1 Imagen Mediante la función de ajuste automático se puede establecer que el televisor se ajuste automáticamente de acuerdo con las señales de vídeo que recibe del ordenador. Esta función también ajusta automáticamente la configuración, los valores de frecuencia y la posición. ➢ Esta función no se puede utilizar en modo DVI-Digital. ➢ Preselección: Pulse el botón SOURCE para seleccionar el modo PC.
Cambio de la posición de la pantalla ➢ 1 Preselección: Pulse el botón SOURCE para seleccionar el modo PC. Definición Pantalla ► Configuración detallada Pulse el botón MENU para ver el menú. Pulse los botones ▲ o ▼ para seleccionar Imagen y, a continuación, pulse el botón ENTER. Pulse los botones ▲ o ▼ para seleccionar Pantalla y, a continuación, pulse el botón ENTER. 2 Pulse los botones ▲ o ▼ para seleccionar Posición y, a continuación, pulse el botón ENTER.
Ajuste de la hora Configuración de la hora El ajuste del reloj es necesario para utilizar las distintas funciones de temporización del televisor. Además, podrá ver la hora mientras ve la televisión. (Pulse el botón INFO.) Opción 1: Ajuste manual del reloj 1 Plug & Play Idioma Configuración Pulse el botón MENU para ver el menú. Pulse los botones ▲ o ▼ para seleccionar Configuración y, a continuación, pulse el botón ENTER.
Opción 2: Ajuste automático del reloj El reloj puede ajustarse automáticamente cuando se recibe una señal digital. Pulse el botón MENU para ver el menú. Pulse los botones ▲ o ▼ para seleccionar Configuración y, a continuación, pulse el botón ENTER. Pulse los botones ▲ o ▼ para seleccionar Tiempo y, a continuación, pulse el botón ENTER.
Activación y desactivación del temporizador 1 Pulse el botón MENU para ver el menú. Pulse los botones ▲ o ▼ para seleccionar Configuración y, a continuación, pulse el botón ENTER. Pulse los botones ▲ o ▼ para seleccionar Tiempo y, a continuación, pulse el botón ENTER. Plug & Play Configuración Utilice esta función para que el televisor se encienda o apague a una hora concreta. Debe ajustar el reloj en primer lugar.
Ajuste del temporizador de desconexión 1 Pulse el botón MENU para ver el menú. Pulse los botones ▲ o ▼ para seleccionar Configuración y, a continuación, pulse el botón ENTER. Pulse los botones ▲ o ▼ para seleccionar Tiempo y, a continuación, pulse el botón ENTER. Plug & Play Configuración El temporizador de desconexión apaga automáticamente el televisor después de un período prefijado (30, 60, 90, 120, 150 y 180 minutos).
Descripción de las funciones Selección del idioma de los menús 1 Configuración Pulse el botón MENU para ver el menú. Pulse los botones ▲ o ▼ para seleccionar Configuración y, a continuación, pulse el botón ENTER. Pulse los botones ▲ o ▼ para seleccionar Idioma y, a continuación, pulse el botón ENTER. Plug & Play Idioma : Español ► Tiempo Selección de red : Cable Configuración red cableada Configuración de red inalámbrica V-Chip Subtítulo Configuración externa Pulse el botón EXIT para salir.
Uso de V-Chip La opción V-Chip bloquea automáticamente los programas que no se consideran apropiados para los menores. El usuario debe introducir primero un código PIN (número de identificación personal) para configurar o cambiar las restricciones de V-Chip. ➢ La función V-Chip no está disponible en los modos HDMI, Componente o PC. Configuración del código de identificación personal (PIN) 1 Configuración red cableada Configuración Pulse el botón MENU para mostrar el menú.
Activación/desactivación de V-Chip 1 Pulse el botón MENU para mostrar el menú. Pulse los botones ▲ o ▼ para seleccionar Configuración y, a continuación, pulse el botón ENTER. V-Chip Ingresar Código * 2 Pulse los botones ▲ o ▼ para seleccionar V-Chip; a continuación pulse el botón ENTER. Se muestra el mensaje Ingresar Código. Escriba su código PIN de 4 dígitos. * * * 0~9 Ingresar Código 3 Aparece la pantalla V-Chip.
4 Aparecerá la pantalla Guías pater. TV. Pulse los botones ▲ o ▼ para seleccionar una de las seis categorías basadas en la edad: • TV-Y:Todos los niños. Los temas y elementos de este programa están diseñados específicamente para audiencia muy joven, incluidos niños de edad entre los dos y seis años. • TV-Y7: Dirigido a niños más mayores. Los temas y elementos de este programa pueden incluir violencia física o cómica suave, o puede asustar a niños con una edad inferior a los 7 años.
Cómo configurar las restricciones utilizando “Clas. MPAA” (G, PG, PG-13, R, NC-17, X, NR) 1 Configuración red cableada Configuración El sistema de clasificación MPAA utiliza el sistema de la Asociación americana de cinematografía y se aplica principalmente en las películas. Cuando el bloqueo V-Chip está activado, el televisor bloquea automáticamente cualquier programa que tenga una determinada clasificación (ya sea según la clasificación MPAA o según la guía de programas de TV).
Cómo configurar las restricciones utilizando el sistema inglés canadiense Pulse el botón MENU para mostrar el menú. Pulse los botones ▲ o ▼ para seleccionar Configuración y, a continuación, pulse el botón ENTER.
Cómo configurar las restricciones utilizando el sistema francés canadiense 1 Configuración red cableada Configuración Pulse el botón MENU para mostrar el menú. Pulse los botones ▲ o ▼ para seleccionar Configuración y, a continuación, pulse el botón ENTER.
Uso de V-Chip (V-Chip) con los canales digitales 1 Pulse el botón MENU para mostrar el menú. Pulse los botones ▲ o ▼ para seleccionar Configuración y, a continuación, pulse el botón ENTER. Configuración red cableada Configuración La información de la restricción paterna se puede usar mientras se ven los canales DTV.
Cómo reiniciar el televisor cuando el V-Chip bloquea un canal (“Escape de emergencia”) Si el televisor sintoniza un canal restringido, el V-Chip lo bloqueará. La pantalla quedará en blanco y aparecerá el siguiente mensaje: 1 Escriba su código PIN Para volver al modo de visualización normal, sintonice un canal diferente con los botones CH o CH . En ciertas condiciones (según la clasificación de los programas de televisión locales) la función V-Chip puede bloquear todos los canales.
Visión de subtítulos (mensajes de texto en pantalla) - Digital La función digital Subtítulo funciona en canales digitales. Pulse el botón MENU para mostrar el menú. Pulse los botones ▲ o ▼ para seleccionar Configuración y, a continuación, pulse el botón ENTER. 2 Pulse los botones ▲ o ▼ para seleccionar Subtítulo y, a continuación, pulse el botón ENTER. Configuración de red inalámbrica Configuración 1 3 Pulse el botón ENTER para seleccionar Subtítulo.
Visión de subtítulos (mensajes de texto en pantalla) - Analógico La función Subtítulo analógico funciona tanto en el modo de canal de televisión analógica como cuando la señal proviene de un dispositivo externo. (Dependiendo de la señal de transmisión, la función de Subtítulos analógicos puede funcionar en canales digitales.) Pulse el botón MENU para mostrar el menú. Pulse los botones ▲ o ▼ para seleccionar Configuración y, a continuación, pulse el botón ENTER.
Ajuste de la melodía de encendido y apagado del televisor El volumen del sonido de la melodía del encendido y del apagado del televisor se puede configurar. 1 V-Chip Configuración Pulse el botón MENU para mostrar el menú. Pulse los botones ▲ o ▼ para seleccionar Configuración y, a continuación, pulse el botón ENTER. 2 Pulse los botones ▲ o ▼ para seleccionar Configuración externa y, a continuación, pulse el botón ENTER. 3 Pulse el botón ENTER para seleccionar Melodía.
Configuración del modo Entretenimiento El modo Entretenimiento permite seleccionar la mejor visualización y el sonido óptimo para ver deportes y películas y para los juegos. Pulse el botón MENU para mostrar el menú. Pulse los botones ▲ o ▼ para seleccionar Configuración y, a continuación, pulse el botón ENTER. 2 Pulse los botones ▲ o ▼ para seleccionar Entretenimiento y, a continuación, pulse el botón ENTER.
Actualización del software Samsung puede ofrecer actualizaciones del firmware del televisor en el futuro. Póngase en contacto con el centro de llamadas de Samsung en 1-800-SAMSUNG para recibir información acerca de la descarga de las actualizaciones y del uso de un controlador USB. Las actualizaciones se pueden realizar conectando una unidad USB al puerto USB. 1 Inserte la unidad USB que contenga la actualización del firmware en el puerto de actualización USB del lateral del televisor.
Autodiagnóstico Prueba de imagen Si cree que hay algún problema con la imagen, realice la prueba de imagen. Compruebe el patrón de color de la pantalla para ver si el problema persiste. 1 Pulse el botón - durante más de 5 segundos. ➢ Aparece el menú Self Diagnostic Test (Prueba de autodiagnóstico). 2 Pulse los botones ▲ o ▼ para seleccionar Picture Test (Prueba de imagen) y pulse el botón ENTER.
WISELINK PRO Uso de la función WISELINK Pro Conexión de un dispositivo USB Panel lateral del TV Se pueden ver películas y fotografías y escuchar archivos de música almacenados en un dispositivo de clase de almacenamiento masivo (MSC) USB. 1 Pulse el botón POWER del mando a distancia o del panel frontal. ➢ El televisor está encendido. 2 Conecte un dispositivo USB que contenga archivos JPEG o MP3 al terminal WISELINK Pro (conector USB) que se encuentra en el lateral del televisor.
Uso del menú WISELINK Pro 1 Pulse el botón MENU. Pulse los botones ▲ o ▼ para seleccionar Aplicación y, a continuación, pulse el botón ENTER. WISELINK Pro 851.98MB/995.00MB Iibre SUM PHOTO 2 Pulse los botones ▲ o ▼ para seleccionar WISELINK Pro y, a continuación, pulse el botón ENTER. ➢ Se muestra el menú WISELINK Pro. Photo Music Movie Setup SUM Dispositivo Salir Pulse el botón W.LINK del mando a distancia para mostrar el menú WISELINK Pro.
Pantalla de visualización Photo 1archivos selecc.5 1 Image001.jpg ★★★ Preferencias Mensual 2 SUM4 Nov3 Jan ▲ Fecha Dispositivo Conf fav Selección Saltar Opción 6 1 Foto actualmente seleccionada Muestra la foto actualmente seleccionada. 2 Norma de clasificación actual Pulse los botones ▲ o ▼ para cambiar la norma de clasificación de las fotos.
Clasificación de la lista de fotos Se pueden clasificar las fotos de la lista según una norma particular. 1 WISELINK Pro ulse el botón W.LINK del mando a distancia para mostrar el menú P WISELINK Pro. SUM 851.98MB/995.00MB Iibre PHOTO 2 Pulse los botones ◄ o ► para seleccionar Photo y pulse el botón ENTER. ➢ Se muestran los archivos de fotos. 3 Pulse los botones ▲ o ▼ para seleccionar una norma de clasificación.
Color Se pueden reproducir y ordenar fotos por color. Para reproducir fotos por grupo de color 1 Seleccione Color como orden estándar de la lista de fotos. 2 Pulse los botones ◄ o ► para seleccionar en la lista secundaria de fotos agrupados por color. (REW) o (FF).RETURN ➢ Para ir al grupo anterior/siguiente, pulse los botones 3 Pulse el botón TOOLS. Pulse los botones ▲ o ▼ para seleccionar Repr. grupo actual. EXIT W.LINK W.
Carpeta Ordena las fotos por carpetas. ➣ Si hay varias carpetas en USB, los archivos de fotos se muestran ordenados en cada carpeta. El archivo de fotos de la carpeta raíz se muestra primero y los otros se muestran ordenados alfabéticamente por nombre. 1 Seleccione Carpeta como orden estándar de la lista de fotos. 2 Pulse los botones ◄ o ► para seleccionar en la lista secundaria de archivos agrupados por carpeta. ➣ Para ir al grupo anterior/siguiente, pulse los botones (REW) o (FF).
Eliminación de archivos de fotos 1 2 3 Pulse los botones ◄ o ► para seleccionar la foto que desee de la lista. Pulse el botón TOOLS. Pulse los botones ▲ o ▼ para seleccionar Borrar y, a continuación, pulse el botón ENTER. ➢ A parece el mensaje Archivo(s) seleccionado(s) : ¿Borrar arch. sel.?. 4 Pulse los botones ◄ o ► para seleccionar Aceptar y pulse el botón ENTER. ➢ L a foto se borra. ➢ C uando se borra un archivo de solo lectura, aparece el mensaje Archivo(s) de sólo lectura. ¿Borrarlo(s)?.
Visualización de una foto o una presentación Visualización de una foto 1 Pulse el botón W.LINK del mando a distancia para mostrar el menú WISELINK Pro. 2 Pulse los botones ◄ o ► para ir a Photo y pulse el botón ENTER. ➢ Se muestran los archivos de fotos. 3 Pulse los botones ◄ o ► para seleccionar la foto que desee de la lista. 4 Pulse el botón TOOLS. 5 Pulse los botones ▲ o ▼ para seleccionar Visionado automático y pulse el botón ENTER.
Visualización de una foto 1 1/1 Image001.jpg 440x440 2.0KB 2008/1/1 Pulse el botón W.LINK del mando a distancia para mostrar el menú WISELINK Pro. Pulse los botones ◄ o ► para ir a Photo y pulse el botón ENTER. Se muestran los archivos de fotos. ➢ Pulse los botones ◄ o ► para seleccionar la foto que desee de la lista. A continuación pulse el botón amarillo para seleccionar sólo un archivo. Pulse el botón ENTER sobre el icono de la foto. ➢ La foto seleccionada se muestra en toda la pantalla.
Ampliación de una imagen Puede ampliar las imágenes en el modo de pantalla completa. Pulse los botones ▲ o ▼ para seleccionar Zoom, a continuación pulse el botón ENTER. Pulse los botones ◄ o ► para disminuir o aumentar el efecto de la ampliación. (x1 → x2 → x4) Para mover una foto ampliada, pulse el botón ENTER y a continuación los botones ▲/▼/◄/►. ➣ Tenga en cuenta que si una imagen ampliada es menor que el tamaño de la pantalla original, la función de cambio de ubicación no está operativa.
Configuración de la música de fondo Se puede configurar la música de fondo. Pulse los botones ▲ o ▼ para seleccionar Configuración de la música de fondo y, a continuación, pulse el botón ENTER. ➣ Si Música de fondo está configurado como Apagado, aunque se haya configurado Configuración de la música de fondo, la música no se reproducirá. ➣ Los archivos de música se deben cargar y reproducir para cambiar el modo BGM ➣ Se muestra el menú Configuración de la música de fondo.
Uso de la lista de música El menú muestra los archivos MP3 que se encuentran entre los archivos guardados en un dispositivo de memoria USB. 1 Pulse el botón W.LINK del mando a distancia para mostrar el menú WISELINK Pro. WISELINK Pro 851.98MB/995.00MB Free SUM Music Photo Music Movie Setup SUM 2 ulse los botones ◄ o ► para seleccionar Music, a continuación P pulse el botón ENTER. ➣ Se muestran los archivos de música.
5 Información de selección del elemento Muestra el número de archivos de música seleccionados cuando se pulsa el botón amarillo. 6 Elementos de ayuda • Botón rojo (Dispositivo): Selecciona el dispositivo conectado. • Botón verde (Conf fav): Cambia la configuración de favorito de la música seleccionada. Pulse este botón varias veces hasta que se muestre el valor que desee. (Consulte la página 78) • Botón amarillo (Selección): Selecciona archivos de música en la lista.
Artista Ordena los archivos de música por el artista. ➣ Ordena los archivos de música por artista y en orden alfabético. 1 Seleccione Artista como orden estándar de la lista de música. 2 Pulse los botones ◄ o ► para seleccionar en la lista secundaria de archivos agrupados alfabéticamente. ➣ Para ir al grupo anterior/siguiente, pulse los botones (REW) o (FF). 3 Pulse el botón TOOLS. 4 Pulse los botones ▲ o ▼ para seleccionar Repr. grupo actual.
Carpeta Ordena los archivos de música por carpetas. ➣ Si hay varias carpetas en USB, los archivos se muestran ordenados en cada carpeta. El archivo de música en la carpeta raíz se muestra primero y los otros se muestran ordenados alfabéticamente por nombre. Orden de los archivos de música por carpeta 1 Seleccione Carpeta como orden estándar de la lista de música. 2 Pulse los botones ◄ o ► para seleccionar en la lista secundaria de archivos agrupados por carpeta.
Supresión de archivos de música 1 Pulse los botones ◄ o ► para seleccionar la música que desee de la lista. 2 Pulse el botón TOOLS. 3 Pulse los botones ▲ o ▼ para seleccionar Borrar y, a continuación, pulse el botón ENTER. ➢ Por ejemplo, aparece el mensaje ¿Borrar arch. sel.? 4 Pulse los botone ◄ o ► para seleccionar Aceptar y, a continuación, pulse el botón ENTER. ➢ La música se borra. ➢ Cuando se borra un archivo de solo lectura, aparece el mensaje Readonly file(s). Es un archivo de sólo lectura.
Reproducción de un archivo de música Reproducción de un archivo de música 1 Pulse el botón W.LINK del mando a distancia para mostrar el menú WISELINK Pro. 2 Pulse los botones ◄ o ► para seleccionar Music, a continuación pulse el botón ENTER. ➣ Se muestran los archivos de música. 3 Pulse el botón ◄ o ► para seleccionar la música que se desea reproducir y, a continuación, pulse el botón ENTER. ➣ Este menú sólo muestra archivos con la extensión MP3.
Reproducción de los archivos de música seleccionados 1 Pulse el botón W.LINK del mando a distancia para mostrar el menú WISELINK Pro. 2 Pulse los botones ◄ o ► para seleccionar Music y pulse el botón ENTER. 3 Pulse los botones ◄ o ► para seleccionar el archivo de música que desee y, a continuación, pulse el botón amarillo. Repita el proceso anterior para seleccionar varios archivos de música. ➢ L a marca ( ) aparece a la izquierda de los archivos de música seleccionados.
Uso de la lista de películas Este menú muestra archivos y carpetas de películas guardadas en un dispositivo de memoria USB. Lista de películas 1 Pulse el botón W.LINK del mando a distancia para mostrar el menú WISELINK Pro. 2 Pulse los botones ◄ o ► para seleccionar Movie y después pulse el botón ENTER. ➣ Se muestran los archivos de películas. ➣ Pulse el botón (reproducir) / ENTER sobre un icono de película para que se reproduzca la película.
3 Ver grupos Muestra los grupos de clasificación. El grupo de clasificación que incluye la película seleccionada se resalta. 4 Dispositivo actual Muestra el nombre del dispositivo actualmente seleccionado. Pulse el botón rojo para seleccionar un dispositivo. 5 Información de selección del elemento Muestra el número de archivos de música seleccionados cuando se pulsa el botón amarillo. 6 Elementos de ayuda • Botón rojo (Dispositivo): Selecciona el dispositivo conectado.
Fecha Ordena las películas por fechas. ➣ Ordena y muestra las películas por fechas. Ordena por años y meses empezando por las películas más antiguas. 1 Seleccione Fecha como orden estándar de la lista de películas. 2 Pulse los botones ◄ o ► para seleccionar en la lista secundaria de archivos agrupados por fechas. ➣ Para ir al grupo anterior/siguiente, pulse los botones (REW) o (FF). 3 Pulse el botón TOOLS. Pulse los botones ▲ o ▼ para seleccionar Repr. grupo actua.
Eliminación de un archivo de película 1 ulse los botones ◄ o ► para seleccionar la película que desee en la P lista. 2 Pulse el botón TOOLS. 3 Pulse los botones ▲ o ▼ para seleccionar Borrar y después pulse el botón ENTER. ➣ Aparece el mensaje ¿Borrar arch. sel.?. ➣ Cuando se borra un archivo de solo lectura, aparece el mensaje Archivo(s) de sólo lectura. ¿Borrar arch. sel.?. 4 Pulse los botones ◄ o ► para seleccionar Aceptar y después pulse el botón ENTER. ➣ La película se borra.
Reproducción de un archivo de película Reproducción de un archivo de película 1 Pulse el botón W.LINK del mando a distancia para mostrar el menú WISELINK Pro. Pulse los botones ◄ o ► para seleccionar Movie y después pulse el botón ENTER. Pulse los botones ◄ o ► para seleccionar una película que reproducir y después pulse el botón ENTER. ➣ El archivo seleccionado se reproduce. ➣ Pulse el botón (reproducir) / ENTER sobre un icono de película para que se reproduzca la película.
Reproducción de archivos de películas seleccionados 1 5 Pulse el botón W.LINK del mando a distancia para mostrar el menú WISELINK Pro. Pulse los botones ◄ o ► para seleccionar Movie y después pulse el botón ENTER. Pulse los botones ◄ o ► para seleccionar el archivo de película que desee y, a continuación, pulse el botón amarillo. Repita el proceso anterior para seleccionar varios archivos de películas. ➣ La marca aparece a la izquierda de los archivos de película seleccionados.
Uso del menú de configuración El menú de configuración muestra al usuario la configuración del menú WISELINK Pro. 1 Pulse el botón W.LINK del mando a distancia para mostrar el menú WISELINK Pro. 2 Pulse los botones ◄ o ► para seleccionar Setup, a continuación pulse el botón ENTER. 3 Pulse los botones ▲ o ▼ para seleccionar la opción deseada. (Velocidad visionado automático, Música Modo de repetición, Película Modo de repetición, Tiemp ejec.protect.pant.
WISELINK Pro-DLNA Configuración de la red DLNA DLNA permite ver en el televisor vídeos e imágenes guardados en el ordenador a través de una conexión de red en modo Wiselink Pro. De esta forma se elimina la necesidad de copiarlos en un dispositivo de almacenamiento USB y después conectar éste al televisor. Para utilizar DLNA, es necesario conectar el televisor a la red e instalar la aplicación DLNA en el ordenador.
Instalación de la aplicación DLNA Para reproducir contenidos del ordenador en el televisor, primero hay que instalar la aplicación. Requisitos del sistema 1 Inserte en el ordenador el CD del programa suministrado con el televisor. 2 Para instalar el programa se necesitan 20 MB libres de espacio en disco duro. ➣ Si se comparten archivos, se necesitan hasta 20 MB de espacio en disco duro por cada 100 archivos.
Uso de la aplicación DLNA Diseño de la pantalla del programa 1 8 2 3 4 5 6 7 1 Menús: La aplicación incluye los menús siguientes: Archivo, Compartición, Servidor y Ayudar. 2 Haga clic para compartir la carpeta del servidor PC seleccionado (consulte la página 100) 3 Haga clic para cancelar el acceso compartido (consulte la página 100) 4 Haga clic para actualizar la carpeta y los archivos del ordenador.
Archivo Pertenencia: Muestra información sobre el archivo o la carpeta seleccionados. Método 1: Seleccione un archivo o una carpeta, seleccione el menú Archivo y, a continuación, seleccione el submenú Pertenencia. Método 2: Seleccione un archivo o una carpeta, haga clic con el botón derecho sobre el archivo o la carpeta seleccionados y después seleccione Pertenencia desde el menú emergente. Salir: S ale de la aplicación DLNA.
Compartición Acceso compartido a una carpeta Se pueden compartir carpetas entre el ordenador y el televisor. El número máximo de carpetas que se pueden compartir es de 32. ➣ El ordenador actuará como servidor del televisor. Método 1: Seleccione una carpeta desde Mi ordenador, seleccione el menú Compartición y, a continuación, seleccione el submenú Compartición Carpeta.
Aplicación de los ajustes actuales Realice este procedimiento cuando sea necesario sincronizar debido a la creación de una nueva carpeta compartida o a la cancelación de una carpeta compartida. El menú Aplicar los cambios del PC al servidor aplica los cambios a las carpetas compartidas según los datos guardados con el programa de acceso compartido del ordenador.
Servidor Servidor La función de servidor del ordenador se puede iniciar o detener. Auto Empezar Puede determinar si desea que el servidor del ordenador se inicie automáticamente cuando Windows se inicie. Cambiar Servidor Nombre Es posible cambiarle el nombre al servidor del ordenador. Escriba un nombre nuevo y haga clic en OK. El nombre nuevo aparecerá en la parte superior derecha de la ventana y se mostrará en el televisor.
Uso de la función DLNA Uso del menú DLNA DLNA (Digital Living Network Alliance) permite reproducir el contenido guardado en un servidor DLNA (normalmente un ordenador) conectado al televisor o a través de una red. Wiselink Pro permite reproducir contenidos guardados en un dispositivo de memoria USB conectado al televisor, mientras que DLNA permite reproducir contenido guardado en un servidor DLNA (el ordenador) conectado al televisor o a través de la red.
Movie ♦ Lista de películas – Clasificación de la lista de películas: Consulte la página 90. – Visualización de la información: Consulte la página 92. – Reproducción de un archivo de película: Consulte la página 93. ♦ Mientras se reproduce un archivo de película – Reproducir & Pausa: Consulte la página 94. – Modo rep.: Consulte la página 94. Movie ABC.
Biblioteca de contenido Uso de la biblioteca de contenido Aplicación La biblioteca de contenidos permite ver o reproducir los contenidos incorporados en el TV o almacenados en un dispositivo USB. ➣ Las funciones de borrar, mover y actualizar no funcionarán con los contenidos incorporados en el TV. Uso del menú Contents Library WISELINK Pro 1 Pulse el botón MENU. Pulse los botones ▲ o ▼ para seleccionar Anynet+ (HDMI-CEC) Aplicación y, a continuación, pulse el botón ENTER.
Uso de los botones del mando a distancia con el menú Content Library Botón Función Mover el cursor y seleccionar una opción. (Rueda) Seleccionar la opción marcada. (ENTER) Volver al menú anterior. Detiene la función actual y vuelve al menú principal de Content Library. CH Detiene el modo Biblioteca de contenidos y vuelve al modo TV. Las teclas que ofrece cada función se describen en su página correspondiente. Se puede controlar el volumen del contenido que se reproduce.
Cooking Muestra varias recetas que después se pueden seguir fácilmente paso a paso. Disfrute de estos contenidos que le ofrecen excelentes sugerencias para preparar comidas. 1 2 Pulse los botones ◄ o ► para seleccionar Cooking en el menú principal de Content Library. A continuación, pulse el botón ENTER. Content Library Cooking ulse los botones ▲ o ▼ para seleccionar Daily Meals, International P o Desert y después pulse el botón ENTER.
Children Incluye contenido educativo e interactivo que pueden ver los niños indefinidamente. Disfrute de las historias, las canciones y los juegos incluidos con los personajes Boowa y Kwala. Content Library 1 2 Pulse los botones ◄ o ► para seleccionar Children en el menú principal de Content Library. A continuación, pulse el botón ENTER. ulse los botones ▲ o ▼ para seleccionar Story, Song o Play y, P después, pulse el botón ENTER.
Fitness Incluye contenidos para un estilo de vida saludable, como ejercicios de estiramientos y masajes, de los que puede disfrutar toda la familia. Content Library 1 Pulse los botones ◄ o ► para seleccionar Fitness en el menú principal de Content Library. A continuación, pulse el botón ENTER. Fitness Gallery 2 ulse los botones ▲ o ▼ para seleccionar Basic Stretches, P Advanced Stretches o Massage, y después pulse el botón ENTER.
Uso de contenidos adicionales con almacenamiento de memoria USB externa Se pueden descargar contenidos adicionales en un dispositivo de memoria USB y reproducirlos en el televisor. (Los contenidos del dispositivo USB externo se reproducen directamente, sin copiarlos en la memoria Flash incorporada en el televisor.) Cómo reproducir y salir de contenidos nuevos 1 Content Library Pulse el botón rojo en el menú principal de Content Library. ➣ Aparecerá la pantalla principal del explorador USB.
Configuración de la red e InfoLink Para acceder a la función de red Infolink de Samsung, necesitará realizar una de las conexiones que se indican en las páginas siguientes. Conexión con la red - Cable Conexión LAN para un entorno DHCP A continuación se describe el procedimiento para configurar la red mediante el protocolo de configuración dinámica de host (DHCP).
Conexión LAN para un entorno IP estático A continuación se describe el procedimiento para configurar la red con una dirección IP estática. Se debe introducir manualmente la dirección IP, la máscara de subred, la puerta de enlace y el DNS proporcionados por el proveedor de servicios de Internet (ISP). Panel posterior del TV Puerto LAN en la pared 1 Cable LAN 1 Conecte el puerto [LAN] del panel posterior del televisor y el puerto LAN de la pared con un cable LAN.
Conexión con la red - Inalámbrica Es posible conectar a la red Infolink de Samsung de manera inalámbrica a través de un compartidor IP inalámbrico. Panel lateral del televisor Puerto LAN en la pared Compartidor IP inalámbrico Adaptador de LAN inalámbrica para Infolink Cable LAN 1 C onecte el adaptador inalámbrico Infolink de Samsung en el terminal Wiselink del televisor. ➣ Para utilizar una red inalámbrica, es necesario usar el adaptador de LAN inalámbrica para Infolink de Samsung (WIS-08BG).
Configuración de la red de cable ➣ En primer lugar, es necesario ajustar Selección de red en Cable. (Consulte la página 113.) Configuración automática Configuración Si se conecta el cable LAN en una ubicación que admita DHCP, los ajustes del protocolo de Internet (IP) se configurarán automáticamente. ➣ Compruebe si el cable LAN está conectado. (Consulte la página 111.) Tiempo Selección de red : Cable 1 Pulse el botón MENU para que se muestre el menú.
Prueba de red Puede comprobar o confirmar el estado de conexión de la red después de configurarla. Tiempo Configuración 1 Pulse el botón MENU para que se muestre el menú. Pulse los botones ▲ o ▼ para seleccionar Configuración y después pulse el botón ENTER. 2 Pulse los botones ▲ o ▼ para seleccionar Configuración red cableada y a continuación pulse el botón ENTER.
Configuración de red inalámbrica ➣ El menú sólo se activa si está conectado el adaptador inalámbrico para Infolink de Samsung. (Consulte la página 113) Configuración automática ➣ Si se conecta el cable LAN en una ubicación que admita DHCP, los ajustes del protocolo de Internet (IP) se configurarán automáticamente. ➣ El compartidor IP inalámbrico que se conecte a este producto debe admitir DHCP. Selección de red Configuración 1 Pulse el botón MENU para que se muestre el menú.
Selección del punto de acceso Se puede seleccionar el compartidor IP que utilizar cuando se configura una red inalámbrica. Selección de red : Inalámbrica Configuración red cableada Configuración 1 Pulse el botón MENU para que se muestre el menú. Pulse los botones ▲ o ▼ para seleccionar Configuración y después pulse el botón ENTER. 2 Pulse los botones ▲ o ▼ para seleccionar Configuración de red inalámbrica y a continuación pulse el botón ENTER.
Prueba de red Puede comprobar o confirmar el estado de conexión de la red después de configurarla. Selección de red Configuración 1 Pulse el botón MENU para que se muestre el menú. Pulse los botones ▲ o ▼ para seleccionar Configuración y después pulse el botón ENTER. 2 Pulse los botones ▲ o ▼ para seleccionar Configuración de red inalámbrica y a continuación pulse el botón ENTER.
Uso de InfoLink Puede ver servicios de noticias, bursátiles y meteorológicos con el servicio InfoLink de Samsung. ➣ Configure la red. (Consulte las páginas 111-118) ➣ Información proporcionada por USA TODAY a través de Infolink sólo para Estados Unidos. No se proporciona información de otros países. Activación de InfoLink 2 ulse los botones ▲ o ▼ para seleccionar InfoLink y pulse el botón P ENTER.
Uso del servicio meteorológico 1 Pulse el botón INFO.L del mando a distancia. 2 Pulse los botones ◄ o ► para acceder al servicio Tiempo y pulse el botón ENTER. Ajuste de la región. 3 Pulse el botón amarillo. Escriba el código postal de la región con los botones numéricos del mando a distancia y pulse el botón ENTER . ➣ Podrá consultar el tiempo de la región seleccionada. ➣ Si selecciona el servicio Tiempo y la región no está configurada, verá un mensaje que le solicita si desea configurar la región.
Uso del servicio bursátil 1 Pulse el botón INFO.L del mando a distancia. 2 Pulse los botones ◄ o ► para acceder al servicio Valores y pulse el botón ENTER. 3 Pulse el botón rojo mientras usa el servicio para cambiar la opción del servicio Valores. 4 Pulse los botones ▲ o ▼, seleccione la opción del servicio Valores y, a continuación, pulse el botón ENTER. 1/2 Mié 6:09 Valores NASDAQ ▲ 21.51 2713.50 0.80% Servicio retrasado al menos 15 minutos. Datos facilitados por interastive Data.
Configuración de InfoLink 1 Pulse el botón INFO.L del mando a distancia. 2 Pulse los botones ◄ o ► para seleccionar Configuración y, a continuación, pulse el botón ENTER. 3 4 ulse los botones ▲ o ▼ para seleccionar la opción deseada. P (Arranque automático, Tiempo visualización, Tamaño fuente, Color de fondo, Posición de InfoLink) Pulse los botones ▲ o ▼ para seleccionar una opción y pulse el botón ENTER.
Guía del producto Aplicación La guía del producto proporciona información sobre las características más importantes del televisor. Content Library 1 Pulse el botón MENU para que se muestre el menú. InfoLink Pulse los botones ▲ o ▼ para seleccionar Aplicación y después pulse el botón ENTER. Product Guide 2 Pulse los botones ▲ o ▼ para seleccionar Product Guide y después pulse el botón ENTER.
Acerca de Anynet+ ¿Qué es Anynet+? Anynet+ es una función que permite controlar todos los dispositivos de Samsung conectados que sean compatibles con Anynet+ con el mando a distancia del televisor Samsung. Conexión de dispositivos Anynet+ El sistema Anynet+ sólo se puede usar con dispositivos de Samsung que tengan la función Anynet+. Para asegurarse de que el dispositivo de Samsung tenga dicha función, compruebe si lleva el logotipo Anynet+.
Configuración de Anynet+ Los parámetros siguientes ayudan a configurar las funciones Anynet+. Para usar la función Anynet+, Anynet+ (HDMI-CEC) debe estar configurado como Encendido (On). 1 2 Pulse los botones ▲ o ▼ para seleccionar Anynet+ (HDMI-CEC) y, a continuación, pulse el botón ENTER. 3 Pulse los botones ▲ o ▼ para seleccionar Configuración y pulse el botón ENTER. 4 Pulse los botones ▲ o ▼ para seleccionar Anynet+ (HDMI-CEC) y, a continuación, pulse el botón ENTER.
Búsqueda y cambio de dispositivos Anynet+ 1 Pulse el botón TOOLS. Pulse el botón ENTER para seleccionar Anynet+ (HDMI-CEC). 2 Pulse los botones ▲ o ▼ para seleccionar Lista de dispositivos y, a continuación, pulse el botón ENTER. ➢ Se muestran todos los dispositivos Anynet+ conectados al televisor. Si no encuentra el dispositivo que desea, pulse el botón rojo para volver a buscar los dispositivos.
Menú Anynet+ El menú Anynet+ cambia según el tipo y el estado de los dispositivos Anynet+ conectados al televisor. Menu Anynet+ Descripción Ver TV Cambia de Anynet+ al modo de emisión de TV. Lista Disp. Muestra la lista de dispositivos de Anynet+. Menú (Nombre_dispositivo)) Muestra el menú del dispositivo conectado. Ejemplo: Cuando hay un grabador de DVD conectado, aparece el menú de títulos del grabador de DVD.
Escucha a través de un receptor (sistema Home Cinema) Se puede escuchar sonido a través de un receptor en lugar de hacerlo mediante el altavoz del TV. 1 Pulse el botón TOOLS. Pulse el botón ENTER para seleccionar Anynet+ (HDMI-CEC). 2 Pulse los botones ▲ o ▼ para seleccionar Receptor. Pulse los botones ◄ o ► para seleccionar Encendido o Apagado. Ver TV List Disp. Grabar : DVDR DVDR Funcionamiento Receptor ◄ Encendido ► Configuración 3 Pulse el botón EXIT para salir.
Apéndice Resolución de problemas Si cree que el televisor tiene un problema, compruebe primero esta lista de posibles problemas y soluciones. Si no funciona ninguno de estos consejos, llame al centro de servicio técnico Samsung más cercano. Problema Posible solución Mala calidad de imagen. Pruebe con otro canal. Ajuste la antena. Compruebe las conexiones de todos los cables. Pruebe con otro canal. Ajuste la antena. Pruebe con otro canal. Pulse el botón SOURCE. Compruebe que el televisor esté enchufado.
Ajuste de montaje mural automático (se vende por separado) (PN50A 50T1F) Una vez instalado el montaje mural automático, la posición del televisor se puede ajustar fácilmente. Panel posterior del TV Montaje mural automático Cable EX-LINK (no suministrado) Acceso al menú 1 Pulse los botones ▲, ▼, ◄ o ► del mando a distancia. ➢ Se muestra la pantalla Ajuste de montaje en pared.
Especificaciones del equipo de montaje mural (VESA) Instale el montaje mural en una pared sólida, perpendicular al suelo. Para colocarlo en otros materiales de construcción, póngase en contacto con el distribuidor más cercano. Si se instala en el techo o en una pared inclinada, puede caerse y causar graves lesiones personales.
Preparación para instalar el montaje mural Caso A. Instalación del montaje mural de SAMSUNG Caso B. Instalación del montaje mural de otra empresa 1 Instale el montaje mural con un par de apriete de 15 kgf cm o menos. Tenga en cuenta que las piezas se pueden dañar si el par de apriete es diferente del especificado. 2 El juego de accesorios incluye soporte y anilla [①] para la instalación de un televisor SAMSUNG en un montaje mural de otra empresa.
Especificaciones Nombre del modelo PN50A760T1F PN58A760T1F PN63A760T1F 50 pulgadas (49.9 pulgadas medidas diagonalmente) 58 pulgadas (58.0 pulgadas medidas diagonalmente) 63 pulgadas (62.9 pulgadas medidas diagonalmente) 1920 x 1080 @ 60 Hz 1920 x 1080 @ 60 Hz 1920 x 1080 @ 60 Hz 10W x 2 15W x 2 15W x 2 48.8 x 30.2 x 3.8 pulgadas (1240 x 765.5 x 96.0 mm) 48.8 x 32.9 x 12.6 pulgadas (1240 x 835.5 x 320.0 mm) 55.8 x 34.1 x 4.0 pulgadas (1417.5 x 866 x 100.4 mm) 55.8 x 36.6 x 13.6 pulgadas (1417.
Dimensiones (PN50A760T1F) 48.8 43.7 30.2 32.9 VISTA SUPERIOR VISTA FRONTAL DETALLE DEL PANEL DE TERMINALES 7.2 x 3.7 pulgadas VISTA LATERAL VISTA POSTERIOR NOTA: No todos los dibujos están necesariamente a escala. Algunas dimensiones están sujetas a cambio sin previo aviso. Consulte las dimensiones de cada unidad antes adaptar el mueble para el televisor. La empresa no se responsabiliza de los errores tipográficos o de impresión. © 2008 Samsung Electronics America, Inc.
Dimensiones (PN58A760T1F) 55.8 51.0 28.6 VISTA SUPERIOR 34.1 VISTA FRONTAL DETALLE DEL PANEL DE TERMINALES 7.2 x 3.7 pulgadas 4.0 VISTA LATERAL VISTA POSTERIOR NOTA: No todos los dibujos están necesariamente a escala. Algunas dimensiones están sujetas a cambio sin previo aviso. Consulte las dimensiones de cada unidad antes adaptar el mueble para el televisor. La empresa no se responsabiliza de los errores tipográficos o de impresión. © 2008 Samsung Electronics America, Inc.
Dimensiones (PN63A760T1F) 60.3 55.1 31.1 VISTA SUPERIOR 36.7 VISTA FRONTAL DETALLE DEL PANEL DE TERMINALES 7.2 x 3.7 pulgadas 3.9 VISTA LATERAL VISTA POSTERIOR NOTA: No todos los dibujos están necesariamente a escala. Algunas dimensiones están sujetas a cambio sin previo aviso. Consulte las dimensiones de cada unidad antes adaptar el mueble para el televisor. La empresa no se responsabiliza de los errores tipográficos o de impresión. © 2008 Samsung Electronics America, Inc.
Esta página se ha dejado en blanco expresamente. BN68-01653A-Spa.
Esta página se ha dejado en blanco expresamente. BN68-01653A-Spa.