User Manual
Table Of Contents
- overview
- installation & connection
- network connection and setup
- Connecting the Camera Directly to Local Area Networking
- Connecting the Camera Directly to a DHCP Based DSL/Cable Modem
- Using Device Manager
- Automatically searching camera
- Configuring IP address
- Manually registering camera
- Automatically configuring IP
- Port Range Forward (Port Mapping) Setup
- Connecting to the Camera from a Shared Local PC
- Connecting to the Camera from a Remote PC via the Internet
- web viewer
- appendix
English _5
! OVERVIEW
CONTENTS
OVERVIEW
3
3 Important Safety Instructions
6 Recommended PC Specifications
6 Recommended Micro SD/SDHC/SDXC
Memory Card Specifications
6 NAS recommended specs
7 What’s Included (PNM-9000QB)
7 What’s Included (Lens module -Optional)
10 At a Glance
INSTALLATION & CONNECTION
12
12 Installation
16 Inserting/Removing a Micro SD card
17 Connecting with other Device
NETWORK CONNECTION AND
SETUP
20
20 Connecting the Camera Directly to Local
Area Networking
20 Connecting the Camera Directly to a DHCP
Based DSL/Cable Modem
21 Using Device Manager
21 Automatically searching camera
21 Configuring IP address
22 Manually registering camera
22 Automatically configuring IP
23 Port Range Forward (Port Mapping) Setup
24 Connecting to the Camera from a Shared
Local PC
24 Connecting to the Camera from a Remote
PC via the Internet
WEB VIEWER
25
25 Connecting to the Camera
26 Password setting
26 Login
26 Camera Web Viewer Setup
APPENDIX
27
27 Troubleshooting