User Manual
Table Of Contents
- overview
- installation & connection
- network connection and setup
- Connecting the Camera Directly to Local Area Networking
- Connecting the Camera Directly to a DHCP Based DSL/Cable Modem
- Using Device Manager
- Automatically searching camera
- Configuring IP address
- Manually registering camera
- Automatically configuring IP
- Port Range Forward (Port Mapping) Setup
- Connecting to the Camera from a Shared Local PC
- Connecting to the Camera from a Remote PC via the Internet
- web viewer
- appendix
English _7
! OVERVIEW
WHAT’S INCLUDED (PNM-9000QB)
Please check if your camera and accessories are all included in the product package.
(As for each sales country, accessories are not the same.)
Appearance Item Name Quantity Description
Main Unit
1
Quick Guide
(Optional)
1
Installation bracket
1
Used to install the main unit on the wall/
ceiling.
Power Terminal Block
1
Plugged in the power plug
Alarm terminal block
1
Used by inserting it into the alarm output
terminal.
Tapping Screw
4
Used for installation on the wall or ceiling
Screw
4
Used to fasten the Main Unit to the Installation Bracket
Ferrite Core
1
Used to block the high-frequency component(s)
contained in the power supply and the signal end from
being radiated to the outside
WHAT’S INCLUDED (LENS MODULE -OPTIONAL)
This is a lens module separately sold that is mounted to PNM-9000QB.
Please check if your camera and accessories are all included in the product package.
(As for each sales country, accessories are not the same.)
Model Name Appearance Item Name Quantity Description
SLA-T1080FA
Lens Module
1
Quick Guide
(Optional)
1
Nut for mounting the lens
module
1
Used to fix the lens module on a ceiling or
wall.
Cable to connect lens module
1
Use this when connecting the main Unit
and lens module
RJ12 Plug
1
Use this when adjusting the length of the
cable to connect the lens module