User Manual

28
ENG
1 Press the MENU button.
Result
: The main menu is displayed.
2 Press the or button to select Picture.
Result
:
The options available in the
Picture
group are
displayed.
3 Press the ENTER () button.
4 Press the or button to select Custom. Press the ENTER
() button.
Result
: The Custom menu is displayed.
5 Press the or button to select the option (Contrast,
Brightness, Sharpness) to be adjusted. Press the ENTER ()
button.
Result
: The horizontal bar is displayed. Move the horizontal
bar’s cursor left or right by pressing the
œ or button.
6 Press the MENU button to confirm your choice.
7 Press the MENU button.
Result
: The options available in the Picture group are
displayed again.
8 Press the or button to select Colour Tone. Press the
ENTER () button.
9 Select the option by pressing the or button.
The colour tones are displayed in the following order.
Custom (PC mode only)
-
Colour1
-
Colour2
-
Colour3
10 Press the MENU button.
Result
: The options available in the Picture group are
displayed again.
11 Press the or button to select Colour Control.
Press the
ENTER () button.
Result
: The
Colour Control menu is displayed.
12 Press the or button to select the option (R, G, B) to be
adjusted. Press the
ENTER () button.
Result
: The horizontal bar is displayed. Move the horizontal
bar’s cursor left or right by pressing the
œ or button.
The Colour Control is not available in the DVI Mode.
Adjusting the Picture Settings (PC or DVI Mode)
Preset to the PC or DVI mode by using the TV/VIDEO button.(or
SOURCE button on the front of the PDP)
Custom
TV
Contrast 70
Brightness 50
Sharpness 70
Colour 50
Tint G50 R50
Mode : Middle
Custom
Colour Tone : Custom
Colour Control
Film Mode : Off
Size : 16 : 9
DNIe : On
PIP
Picture
Move Enter Return
TV
Move Enter Return
Mode : Middle
Custom
Colour Tone : Normal
Colour Control
Film Mode : Off
Size : 16 : 9
DNIe : On
PIP
Picture
Move Enter Return
TV
Custom
Colour1
Colour2
Colour3
Colour Control
TV
R70
G50
B70
Move Enter Return
BN68-00699A-00_Eng 4/13/04 11:18 AM Page 28