User Manual

English - 5
➢
The product colour and shape may vary depending on the model.
Connection Panel
Rear Panel
ˇ´
∏
¨
ˆØ
Cable Television
Network
.
ns
or
”
or
Œ
Œ ANT IN VHF/UHF (75Ω)
- 75Ω Coaxial connector for Aerial/Cable Network.
´ Connecting external Audio Devices
- Connect RCA audio signals from the TV to an external
source, such as Audio equipment.
ˇ COMPONENT IN
- Video (Y/P
B/PR) and audio (AUDIO L/R) inputs for
Component.
¨ PC IN / AUDIO
- Connect to the video and audio output jack on your PC.
ˆ EXT 1, EXT 2
- Inputs or outputs for external devices, such as VCR,
DVD, video game device or video disc players.
Ø HDMI/DVI IN
- Connect to the HDMI jack of a device with HDMI
output. These inputs can also be used as a DVI
connection with separate analog audio inputs. An
optional HDMI/DVI cable will be necessary to make
this connection. When using the optional HDMI/DVI
adapter, the DVI analog audio inputs on your TV allow
you to receive left and right audio from your DVI
device. (Not compatible with PC)
- When connecting this product via HDMI or DVI to a
Set Top Box, DVD Player or Games Console etc,
make sure that it has been set to a compatible video
output mode as shown in the table below.
Failure to observe this may result in picture distortion,
image breakup or no picture.
- Do not attempt to connect the HDMI/DVI connector to
a PC or Laptop Graphics Card.
(This will result in a blank screen being displayed)
DVI AUDIO IN L/R
- DVI audio outputs for external devices.
∏ POWER IN
- Connect the supplied power cord.
” SERVICE
- Connector for service only.
➢
Supported modes for HDMI/DVI and Component
☛
Whenever you connect an audio or video system to your set, ensure that all elements are switched off.
☛
When connecting an external device, match the colour of the connection terminal to the cable.
HDMI/DVI 50Hz
HDMI/DVI 60Hz
Component
480i
X
X
O
480p
O
O
O
576i
X
X
O
576p
O
X
O
720p
O
O
O
1080i
O
O
O
BN68-01042A-00Eng_0316 3/16/06 9:56 AM Page 5