Quick Guide
English - 47
Selecting the Sound Mode (depending on the model)
The “DUAL I-II” button displays/controls the processing and output
of the audio signal. When power is switched on, the mode is
automatically preset to either “DUAL-I ” or “Stereo”, depending on
the current transmission.
➢
◆ If the receiving conditions deteriorate, listening will be
easier if the mode is set to
Mono.
◆ If the stereo signal is weak and automatic switching
occurs, switch to
Mono.
◆ When receiving mono sound in AV mode, connect to the
“AUDIO-L” input connector on the panel (front or side,
depending on the model). If mono sound only comes out
of the left speaker, press the
DUAL I-II button.
Type of broadcast
Regular broadcast
(Standard audio)
Regular +
NICAM Mono
NICAM stereo
NICAM DUAL-I/II
Regular broadcast
(Standard audio)
Bilingual or DUAL-I/II
Stereo
On-screen indication
Mono
(Normal use)
NICAM Mono
↔
Mono
NICAM stereo
↔
Mono
(Forced mono)
Mono
DUAL-
I
↔
DUAL-II
Stereo
↔
Mono
(Forced mono)
NICAM DUAL-I
→
NICAM DUAL-II
→
Mono
NICAM
Stereo
A2
Stereo
BN68-00951A-00Eng 8/3/05 3:07 PM Page 47