User Manual

English - 28
Picture Options
You can set detailed picture settings.
1 Press the MENU button to display the menu.
2 Press the ENTER button to select Picture.
3 Press the ▲ or ▼ button to select Picture Options, then
press the ENTER button.
4 Select the required option by pressing the ▲ or ▼ button,
then press the ENTER button.
5 When you are satisfied with your setting, press the
ENTER button.
6 Press the EXIT button to exit.
®
In PC mode, you can only make changes to the Colour
Tone, Size and Screen Burn Protection from among the
items in Picture Options.
 Colour Tone: Cool2/Cool1/Normal/Warm1/Warm2
®
When the picture mode is set to Dynamic or
Standard, Warm1 and Warm2 cannot be selected.
 Size: Auto Wide/16:9/Wide Zoom/Zoom/4:3/Just Scan
You can select the picture size which best corresponds to
your viewing requirements.
−
Auto Wide: Expanding and pulling up the picture from
4:3 to 16:9 ratio.
Auto Wide function is available only in TV, Ext.1, Ext.2,
AV and S-Video mode.
− 16:9
: Sets the picture to 16:9 wide mode.
−
Wide Zoom:
Magnify the size of the picture more than 4:3.
Move the screen up/down using the ▲ or ▼ button after
selecting the Position by pressing the ► or ENTER button.
− Zoom: Magnify the size of the picture vertically on screen.
− 4:3: Sets the picture to 4:3 normal mode.
−
Just Scan: Use this function to see the full image without any cutoff when HDMI(720p/1080i),
Component(1080i) signals are input.
After selecting Just Scan in HDMI (1080i) or Component (1080i) mode: Press the ◄ or ► button
to select Position, then press the ENTER button. Press the ▲, ▼, ◄ or ► button to move the
picture. Reset: Press the ◄ or ► button to select Reset, then press the ENTER button. You can initialize the setting.
®
With the HDMI Just Scan picture size, depending on the AV devices, the screen may be cut off
or a specific colour appears on the screen.
®
For an HDMI (1080p) connection of 24, 25, 30, 50, and 60 Hz, and for a Component (1080p)
connection of 50 and 60Hz, only the input source is supported.
®
You can change the picture size simply by pressing the P.SIZE button on the remote control.
®
Depending on the input source, the picture size options may vary.
®
The items available may differ depending on the selected mode.
®
In PC Mode, only "16:9" and "4:3" mode can be adjusted. Continued...
 Flesh Tone:-15~+15
You can emphasize the pink tone in the picture.
Press the ◄ or ► button until you reach the optimal setting.
®
Changing the adjustment value will refresh the adjusted screen.
 Edge Enhancement: Off/On
You can emphasize object boundaries.
Picture
Tint (G/R) : G50/R50
Detailed Settings
Picture Options ►
Picture Reset
ReturnEnter
Picture Options
Colour Tone :
Size :
Screen Mode
Digital NR :
DNIe
HDMI Black Level
: 2min
Real 100Hz Demo : Off
Move
Cool2
Cool1
Normal
Warm1
Warm2
wOw[\WPiu]_TWX\[^hUGGGY_ YWW_TW\TX\GGG㝘䟸GZaYWa\X