User Manual

English - 51
Serial Cable(1P to 1P)(Not supplied)
Rear Panel
Auto Wall-Mount
Auto Wall- mount adjustment (Sold separately)
Once the auto wall mount is installed, the position of your TV can be easily adjusted.
Plug & Play ►
Language : English
Time
Change PIN
Parental Lock
Subtitle
Teletext Language : ----
Preference
Setup
Entering the menu
1
Press the ▲, ▼, ◄ or ► button on your remote control.
®
The Wall Mount Adjustment screen is displayed.
®
If the Wall Mount Adjustment screen is not displayed when
clicking on a direction button while watching your TV, use the
menu to display that screen.
• Press the
MENU button to display the menu. Press the ▲
or ▼ button to select Setup, then press the ENTER button.
• Press the ▲ or ▼ button to select
Wall-Mount
Adjustment, then press the ENTER button.
Remembering the Position
2 Adjust to the desired position using the ▲, ▼, ◄, ► buttons.
®
If you press an arrow button when no OSD is displayed on the
TV screen, the Adjustment screen appears.
®
Press the INFO button to reset. Press the ◄ or ► button to
select Yes, then press the ENTER button. The position is
initialized to the default setting.
3 Press the blue button.
Press the ▲ and ▼ buttons to select a save mode from either
Position1, Position2 or Position3 in order to save the current
position.
®
To not save the current position, press the RETURN button.
®
When selecting a save mode, you cannot use the Color
buttons.
4
Press the ENTER button to save.
®
When Position1 is selected, the message Current position
saved as Position1 is displayed.
5
Press the ENTER button.
®
The saved Position appears on the left side of the OSD.
Continued...
Save
Move
Enter
Select a mode to save.
Position1
Position2
Position3
Return
Wall-Mount Adjustment
Adjust
Position
123
Centre
►
►
►
►
►
►
►
►
Save
wOw[\WPiu]_TWX\[^hUGGG\X YWW_TW\TX\GGG㝘䟸GZaYXaW[