User Manual

38
English
Using the Menus
Setup
Option Description
Network Setup
Cable Network Setup-Manual
To connect the TV to the LAN using a static IP address, you
must set up the Internet Protocol (IP).
1. Set Network Type to Cable.
2. Select Cable Network Setup.
3. Set Internet Protocol Setup to Manual.
4. Set up IP Address, Subnet Mask, Gateway and DNS
Server.
Press the number buttons on the remote control when
you set the Network manually.
5. Select Network Test to check the network connectivity.
Wireless Network Setup
Internet Protocol Setup → Auto / Manual
Network Test: You can test or confirm the network
connection status after setting up the network.
Select a network: Access Point: You can select the IP
sharer to use when using a wireless network.
If a wireless Access Point is not in the Access Point
list, press the Red button.
When the connection is made, you will be returned
to the screen automatically.
If you have selected an Access Point with a security
authentication: The Security Key input screen
appears. Enter the security key and press the Blue
button on the remote control.
If security encryption type is WEP, 0~9, A~F will be
available when you input security key.
Connecting WPS (Wi-Fi Protected Setup)
If Security Key is already set: In access point list, select
WPS.
You can select PBC, PIN, Security Key.
Connecting by using PBC: Select a PBC (Push Button
Configuration). Press the PBC button on the AP
(access point) within 2minutes, and wait for connection.
Connecting by using PIN: Select a PIN (Personal
Identification Number).
The message showing the PIN Code is displayed.
Input the PIN Code at AP device within 2minutes.
Select OK and wait for connection.
Try again if connecting operation doesn’t work.
When the connection is not established although
tried again, reset the access point. Please refer to a
manual of each access point.
Connecting by using Security Key: When selecting
Security Key, the input window is displayed. Input the
security key and press ENTERE button.
Try again if connecting operation doesn’t work.
If Security Key is not set: When security setting of
AP that supports WPS is NONE, you can select PBC,
PIN, None Security. None Security is capable of
connecting to AP directly without using WPC function.
Process of PBC, PIN is same as above.
Refer to if Security Key is already set.
Try again if connecting operation doesn’t work.
■
•
■
•
•
•




■
•
•



•

•


The menu is activated only if
the ‘Samsung Wireless LAN
Adapter’ is connected.
■
*
* *
*
*
Wireless Network Setup
Select a network
n Move E Enter R Return
Search
Ad-hoc
AP_1
AP_2
AP_3
AP_4
*
PBC
PIN
Security Key
3/9
*
Press the PBC button on the access point.
Access Point Name : AP_3
Cancel
*
Press OK After input TV’s Pincode in the access
point’s setup.
Access Point Name : AP_3
PIN Code : 12345678
Cancel
OK
*
* *
*
*
Wireless Network Setup
Select a network
n Move E Enter R Return
Search
Ad-hoc
AP_1
AP_2
AP_3
AP_4
*
PBC
PIN
Security Key
3/9
* *
*
*
* *
* *
Wireless Network Setup
Security Key
n Move Number E Enter R Return
_
A B C D E F G
H I J K L M N
O P Q R S T U
V W X Y Z
0~9
Number
Lowercase
Delete
Done
BN68-02113G_Eng.indb 38 2009-04-09 오후 5:32:31