User Manual

66
English
Anynet+
Anynet
+
Menu
The Anynet+ menu changes depending on the type and status of the Anynet+ devices
connected to the TV.
Option Description
View TV
Anynet
+
mode changes to TV broadcast mode.
Device List
Shows the Anynet
+
device list.
(device_name) MENU
Shows the connected device menus.
E.g. If a DVD recorder is connected, the disc menu of the
DVD recorder will appear.
(device_name) INFO
Shows the play menu of the connected device.
E.g. If a DVD recorder is connected, the play menu of the
DVD recorder will appear.
Recording : (*recorder)
Starts recording immediately using the recorder.
(This is only available for devices that support the
recording function.)
(*recorder) Reserve
Recording
Enables reserving a recording for the recorder. (This is only
available for devices that support the recording reservation
function.)
Stop Recording:
(*recorder)
Stops recording.
Receiver
Sound is played through the receiver.
TV Remote Control Buttons Available in Anynet+ Mode
Device Type Operating Status Available Buttons
Anynet
+
Device
After switching to the device,
when the menu of the
corresponding device is displayed
on the screen.
Numeric buttons
▲/▼/◄/►/ENTER
E
buttons
Colour buttons / EXIT button
After switching to the device,
while playing a file
(Backward search) /
(Forward search) /
(Stop) /
(Play) /
(Pause)
Device with built-in
Tuner
After switching to the device,
when you are watching a TV
programme
P / button
Audio Device
When Receiver is activated
= / button
M MUTE button
The Anynet+ function only works when the active source on the TV remote control is set
to TV.
The button works only while in the recordable state.
You cannot control Anynet+ devices using the buttons on the TV. You can control
Anynet+ devices only using the TV remote control.
The TV remote control may not work under certain conditions. In this case, reselect the
Anynet+ device.
The Anynet+ functions do not operate with other manufacturers’ products.
The , operations may differ depending on the device.
■
■
■
■
■
■
If more than one recording
device is connected, they
are displayed as (*recorder)
and if only one recording
device is connected, it will
be represented as (*device_
name).
■
BN68-02113G_Eng.indb 66 2009-04-09 오후 5:33:00