User Manual

English - 18
Customizing the Picture Settings
Your television has several setting options that allow you to
control the picture quality.
1 Press the MENU button to display the menu.
2 Press the ENTER button to select Picture.
3 Press the ENTER button again to select Mode.
4 Select the required mode by pressing the ▲ or ▼ button, then
press the ENTER button.
Available modes:
Dynamic, Standard, Movie
5 Select the required option by pressing the ▲ or ▼ button, then
press the ENTER button.
6 When you are satisfied with your setting, press the ENTER
button.
7 Press the EXIT button to exit.
 Contrast – Brightness – Sharpness – Colour – Tint
➢
In TV mode of the PAL system, you cannot use the Tint
Function.
Contrast – Brightness – Colour Tone : PC Mode
Press the ◄ or ► button until you reach the optimal setting.
 Colour Tone: Cool2/Cool1/Normal/Warm1/Warm2
➢
When the picture mode is set to Dynamic or Standard, Warm1 and Warm2 cannot be selected.
 Reset: Cancel/OK
Select
OK. You can return to the factory defaults picture settings.
➢
The reset function is set for each picture mode and colour tone.
Move Enter Return
Mode :
Dynamic 
Contrast 100
Brightness 45
Sharpness 75
Colour 55
Tint G50 R50
Colour Tone :
Cool1 
Detailed Settings

Size : Auto Wide 
Screen Mode : 16:9

Digital NR : Auto

 More
Picture
T V
Move Enter Return
Mode : Dynamic
Contrast 100
Brightness 45
Sharpness 75
Colour 55
Tint G50 R50
Colour Tone : Cool1
Detailed Settings
Size : Auto Wide
Screen Mode : 16:9
Digital NR : Auto
 More
Picture
T V
Cool2
Cool1
Normal
Warm1
Warm2
BN68-01337A-00Eng.indd 18 2007-09-21 ¿ÀÈÄ 4:27:06