User Manual

English - 19
Configuring Detailed Settings on the Picture
You can set detailed picture settings.
1 Press the MENU button to display the menu.
2 Press the ENTER button to select Picture.
3 Press the ▲ or ▼ button to select Detailed Settings, then
press the ENTER button.
4 Select the required option by pressing the ▲ or ▼ button, then
press the ENTER button.
Available options: Black Adjust
, Dynamic Contrast, Gamma,
White Balance, My Colour Control, Edge Enhancement,
Colour Space
5 When you are satisfied with your setting, press the ENTER
button.
6 Press the EXIT button to exit.
➢
Detailed Settings is available in Standard or Movie mode.
If DNIe is Off, the Detailed Settings cannot be selected when
the Picture mode is in Standard mode.
 Black Adjust: Off/Low/Medium/High
You can directly select the black level on the screen to adjust
the screen depth.
 Dynamic Contrast: Off/Low/Medium/High
You can adjust the screen contrast so that the optimal contrast is provided.
 Gamma: -3 ~ +3
You can adjust the middle brightness of pictures.
Press the ◄ or ► button until you reach the optimal setting.
 White Balance: R-Offset/G-Offset/B-Offset/R-Gain/G-Gain/B-Gain/Reset
You can adjust the color temperature for more natural picture colors.
R-Offset/G-Offset/B-Offset/R-Gain/G-Gain/B-Gain: Changing the adjustment value will refresh the
adjusted screen.
Select the required option by pressing the ▲ or ▼ button, then press the ENTER button.
Press the ◄ or ► button until you reach the optimal setting.
Reset: The previously adjusted white balance will be reset to the factory defaults.
 My Colour Control: Pink/Green/Blue/White/Reset
This setting can be adjusted to suit your personal preferences.
Pink/Green/Blue/White: Changing the adjustment value will refresh the adjusted screen.
Select the required option by pressing the ▲ or ▼ button, then press the ENTER button.
Press the ◄ or ► button until you reach the optimal setting.
Reset: The previously adjusted colours will be reset to the factory defaults.
 Edge Enhancement: Off/On
You can emphasize object boundaries.
 Colour Space: Auto/Wide
You can set the colour reproduction space for the input signal to Auto or Wide.
Move Enter Return
Black Adjust : Off 
Dynamic Contrast : Off 
Gamma : 0 
White Balance 
My Colour Control 
Edge Enhancement : Off 
Colour Space : Auto 
Detailed Settings
T V
Move Enter Return
Mode :
Movie 
Contrast 80
Brightness 45
Sharpness 10
Colour 53
Tint G50 R50
Colour Tone :
Warm2 
Detailed Settings

Size : Auto Wide 
Screen Mode : 16:9

Digital NR : Auto

 More
Picture
T V
BN68-01337A-00Eng.indd 19 2007-09-21 ¿ÀÈÄ 4:27:07