User Manual

English - 32
Setting the PC
➢
Preset to the PC mode by pressing the SOURCE button.
1 Press the MENU button to display the menu.
2 Press the ▲ or ▼ button to select Setup, then press the
ENTER button.
3 Press the ▲ or ▼ button to select PC, then press the
ENTER button.
4 Select the required option by pressing the ▲ or ▼ button, then
press the ENTER button.
Available options:
Image Lock, Position, Auto Adjustment,
Image Reset
5 When you are satisfied with your setting, press the ENTER
button.
6 Press the EXIT button to exit.
 Image Lock: Coarse/Fine
The purpose of picture quality adjustment is to remove or
reduce picture noise.
If the noise is not removed by Fine-tuning alone, then adjust the
frequency as best as possible (coarse) and Fine-tune again.
After the noise has been reduced, re-adjust the picture so that it
is aligned on the center of screen.
1 Press the ▲ or ▼ button to select Coarse or Fine, then
press the ENTER button.
2 Press the ◄ or ► button to adjust the screen quality,
vertical stripes may appear or the picture may be blurry.
Press the ENTER button.
 Position
Adjust the PC’s screen positioning if it does not fit the TV
screen.
1 Adjust the position by pressing the ▲/▼/◄/► button.
2 Press the ENTER button.
 Auto Adjustment
Auto adjustment allows the PC screen of set to self-adjust to the
incoming PC video signal.
The values of fine, coarse and position are adjusted
automatically.
 Image Reset
You can replace all image settings with the factory default
values.
Move Enter Return
Image Lock
Position
Auto Adjustment
Image Reset
PC
T V
Move Enter Return
Coarse 50
Fine 63
Image Lock
T V
Move Enter Return
Position
T V
Auto Adjustment in Progress
Please wait.
Move Enter Return
Plug & Play

Language : English 
Time 
Game Mode : On 
Blue Screen : Off 
Melody : Medium 
PC 
Home Theatre PC : Off 
Light Effect : In Standby 
Wall-Mount Adjustment 
Energy Saving : Off 
 More
Setup
T V
Image Reset is completed.
OK
BN68-01337A-00Eng.indd 32 2007-09-21 ¿ÀÈÄ 4:27:38