User Manual

20
ENG
Contrast
Brightness
Sharpness
Color
Color Tone Normal
Move Adjust Exit
P I C T U R E
Select Custom
Your PDP has several settings which allow you to control picture
quality:
◆ Contrast, Brightness, Sharpness, Color,
Color Tone, Tint
(NTSC only) .
➣
When the Select is set to Custom, the following settings can
be adjusted.
1 Press the Menu button, then press the joystick button to enter the
PICTURE menu.
2 Move the joystick up or down to select the required option.
3 To adjust the... Move the joystick...
◆ Contrast ◆ left or right.
◆ Brightness Result: The horizontal bar is displayed.
◆ Sharpness
◆ Color
◆ Color Tone ◆ left or right to select the required option
(
Normal, Warm1, Warm2, Cool1, Cool2).
4 When you are satisfied with the settings, press the Menu button
repeatedly to return to normal viewing.
➣
◆ If you make any changes to these settings, the picture
standard is automatically switched to
Custom.
◆ In the PC mode, you can’t adjust the Color and Color
Tone
.
Customizing the Picture
Contrast 100
Contrast
Brightness
Sharpness
Color
Color Tone Normal
Move Select Exit
P I C T U R E
Select Custom
Normal
Press the “Still” button to freeze the picture on a given frame.
To return to normal viewing, press the “Still” button again.
➣
In the PIP mode, both the main and sub pictures freeze.
Freezing the Current Picture