User Manual

41
Power Saver (PC Mode Only)
ENG
➢
Preset to the PC mode by using the Source button.
1 Press the Menu button.
Result:
The menus available are displayed.
2 Move the joystick up or down to select the PIP menu and press
the joystick button.
Result:
The Select option is selected.
3 Set to On by moving the joystick left or right.
Result:
The options available in the PIP group are displayed.
4 Move the joystick up or down to select the Sound option and move
the joystick left or right repeatedly.
Result:
The followings are displayed. You can select your
required sound of main or sub picture.
Main ↔ Sub
5 Move the joystick up or down to select the Locate option and
move the sub picture where you want by using the joystick.
6 When you have selected, press the Menu button repeatedly to
return to normal viewing.
➣
◆ The size of sub picture can depend on the resolution of PC.
◆ For selecting the external source and size of the sub
picture, refer to page 26.
Enjoying the PIP Feature in PC mode
Source AV1(V)
Sound
Main
Size Large
Locate
Move Select Exit
P I P
Select On
Source AV1(V)
Sound Main
Size Large
Locate
Move Select Exit
P I P
Select On
Adjust Exit
PIP Panning
This monitor has a built-in power management system called Power Saver. This power management system
saves energy by switching your monitor into a low-power mode when it has not been used for a certain
amount of time. This power management system operates with a VESA DPMS compliant video card installed
in your computer. You use a software utility installed on your computer to set up this feature.
Power-Saving Function mode
State
Normal
Stand-by Mode Suspend Mode Power-Off ModeOperation
Position A1 Position A2
Horizontal Sync Active Inactive Active Inactive
Vertical Sync Active Active Inactive Inactive
Video Active Blanked Blanked Blanked
Power Indicator Green
Red Blinking Red Blinking Red Blinking
(1 sec interval) (1 sec interval) (1 sec interval)
➣
◆ This monitor automatically returns to normal operation when horizontal and vertical sync return.
◆ This occurs when moving the computer’s mouse or pressing a key on the keyboard.
◆ For energy conservation, turn your monitor OFF when it is not needed, or when leaving it
unattended for long periods.