User Manual

47
Controlling the Power
ENG
Click “Power Control” of the main icons and the Power Control screen appears.
Info Grid shows some basic information
necessary to Power Control.
ΠPower Status
´ Input Source
ˇ Aspect Ratio
¨ On Timer Status
ˆ Off Timer Status
Click “Select All” or mark ‘ ✔ ’ in the check box to select the display you want to control.
Power Control can control some functions of
the ‘
✔’ marked display.
ΠPower On/Off
- Turns On/Off the power of the selected
display.
- Turns on each set at one second interval to
prevent the power overload that might occur
when many sets turn on at the same time.
´ Volume Control
- Controls the volume of the selected display.
- It receives the volume value of the selected
display from the sets and displays it in the
slider. (When you release the selection or
choose Select All, the value will return to
default 10.)
ˇ Mute On/Off
- Turns On/Off the mute of the selected display.
- When selecting one set at a time, if the selected set is already set on MUTE, you must mark the MUTE
display. (if you undo the selections or choose
Select All, the values are returned to default settings).
➣
The Volume and Mute functions are available for only the displays are powered ON.
➣
The Power Control function is available for all the displays are
connected.