User Manual
Table Of Contents
- User Instructions
- Contents
- Checking Parts
- Using the Stand-Base
- Control Panel
- Connection Panel
- Viewing the Remote Control
- Switching Your Television On and Off
- Viewing the Menus
- Plug & Play Feature
- Viewing External Signal Sources
- Editing Device Names
- Storing Channels Automatically
- Storing Channels Manually
- Adding / Locking Channels
- Sorting the Stored Channels
- Assigning Names to Channels
- Fine Tuning Channel Reception
- LNA (Low Noise Amplifier)
- Changing the Picture Standard
- Customizing the Picture Settings
- Configuring Detailed Settings on the Picture
- Selecting the Picture Size
- Selecting the Screen Mode
- Digital NR / Active Colour / DNIe / Movie Plus
- Freezing the Current Picture
- Sound Features
- Selecting the Sound Mode (depending on the model)
- Time Features
- Language / Blue Screen / Melody / Energy Saving /
- Using the Game Mode
- Wall- mount adjustment (Sold separately) (PS-50P96FD)
- Viewing the Picture in Picture (PIP)
- Screen Burn Protection
- Setting up Your PC Software (Based on Windows XP)
- Display Modes
- Setting the PC
- Setting the Home Theatre PC
- Previewing the DTV Menu System
- Displaying Programme Information
- Operating the DTV Menu
- What is Anynet+?
- Connecting Anynet+ Devices
- Setting Up Anynet+
- Scanning and Switching between Anynet+ Devices
- Recording
- Listening through a Receiver
- Check Points before Requesting Service
- Teletext Feature (depending on the model)
- Wall Mount Kit Specifications (VESA)
- Setting Up Your Remote Control
- How to assemble the Stand-Base (depending on the model)
- Troubleshooting
- Specifications
English - 19
Configuring Detailed Settings on the Picture
You can set detailed picture settings.
1 Press the MENU button to display the menu.
2 Press the ENTER/OK button to select Picture.
3 Press the ▲ or ▼ button to select Detailed Settings, then
press the ENTER/OK button.
4 Select the required option by pressing the ▲ or ▼ button, then
press the ENTER/OK button.
Available options: Black Adjust
, Dynamic Contrast, Gamma,
White Balance, My Colour Control, Edge Enhancement,
Colour Space, xvYCC
5 When you are satisfied with your setting, press the ENTER/OK
button.
6 Press the EXIT button to exit.
➢
When the picture mode is set to Movie or Standard, Detailed
Settings can be selected.
➢
If DNIe is Off, the Detailed Settings cannot be selected when
the Picture mode is in Standard mode.
Black Adjust: Off/Low/Medium/High
You can directly select the black level on the screen to adjust the screen depth.
Dynamic Contrast: Off/Low/Medium/High
You can adjust the screen contrast so that the optimal contrast is provided.
Gamma: -3 ~ +3
You can adjust the middle brightness of pictures.
Press the ◄ or ► button until you reach the optimal setting.
White Balance: R-Offset/G-Offset/B-Offset/R-Gain/G-Gain/B-Gain/Reset
You can adjust the colour temperature for more natural picture colors.
R-Offset/G-Offset/B-Offset/R-Gain/G-Gain/B-Gain: Changing the adjustment value will refresh the
adjusted screen.
Select the required option by pressing the ▲ or ▼ button, then press the ENTER/OK button. Press
the ◄ or ► button until you reach the optimal setting.
Reset: The previously adjusted white balance will be reset to the factory defaults.
My Colour Control: Pink/Green/Blue/White/Reset
This setting can be adjusted to suit your personal preferences.
Pink/Green/Blue/White: Changing the adjustment value will refresh the adjusted screen.
Select the required option by pressing the ▲ or ▼ button, then press the ENTER/OK button. Press
the ◄ or ► button until you reach the optimal setting.
Reset: The previously adjusted colours will be reset to the factory defaults.
Edge Enhancement: Off/On
You can emphasize object boundaries.
Colour Space: Auto/Wide
You can set the colour reproduction space for the input signal to Auto or Wide.
xvYCC: Off/On
Setting the xvYCC mode to On increases detail and colour space when watching movies from an
external device (ie. DVD player) connected to the HDMI or Component IN jacks. You must set the
Picture Mode to Movie to enjoy this feature.
➢
The xvYCC function works only in Component or HDMI mode.
Move
Enter
Return
Mode :
Movie
Contrast 80
Brightness 45
Sharpness 10
Colour 53
Tint G 50 R 50
Colour Tone :
Warm2
Detailed Settings
More
Picture
T V
Move
Enter
Return
Black Adjust : Off
Dynamic Contrast :
Off
Gamma :
0
White Balance
My Colour Control
Edge Enhancement
: Off
Colour Space :
Auto
xvYCC : Off
Detailed Settings
T V
BN68-01094R-00Eng.indd 19 2007-05-22 ¿ÀÀü 9:26:57