User Manual
Table Of Contents
- User Instructions
- Contents
- Checking Parts
- Using the Stand-Base
- Control Panel
- Connection Panel
- Viewing the Remote Control
- Switching Your Television On and Off
- Viewing the Menus
- Plug & Play Feature
- Viewing External Signal Sources
- Editing Device Names
- Storing Channels Automatically
- Storing Channels Manually
- Adding / Locking Channels
- Sorting the Stored Channels
- Assigning Names to Channels
- Fine Tuning Channel Reception
- LNA (Low Noise Amplifier)
- Changing the Picture Standard
- Customizing the Picture Settings
- Configuring Detailed Settings on the Picture
- Selecting the Picture Size
- Selecting the Screen Mode
- Digital NR / Active Colour / DNIe / Movie Plus
- Freezing the Current Picture
- Sound Features
- Selecting the Sound Mode (depending on the model)
- Time Features
- Language / Blue Screen / Melody / Energy Saving /
- Using the Game Mode
- Wall- mount adjustment (Sold separately) (PS-50P96FD)
- Viewing the Picture in Picture (PIP)
- Screen Burn Protection
- Setting up Your PC Software (Based on Windows XP)
- Display Modes
- Setting the PC
- Setting the Home Theatre PC
- Previewing the DTV Menu System
- Displaying Programme Information
- Operating the DTV Menu
- What is Anynet+?
- Connecting Anynet+ Devices
- Setting Up Anynet+
- Scanning and Switching between Anynet+ Devices
- Recording
- Listening through a Receiver
- Check Points before Requesting Service
- Teletext Feature (depending on the model)
- Wall Mount Kit Specifications (VESA)
- Setting Up Your Remote Control
- How to assemble the Stand-Base (depending on the model)
- Troubleshooting
- Specifications
English - 44
4.5 System
This menu consists of 5 sub-menus:
Product Information, Signal Information, Software Upgrade,
Common Interface, and Reset.
− Product Information
You can view your product information. For service or repair,
please contact a Samsung approved dealer.
Press the ENTER/OK button with Product Information
selected. The product information menu is displayed.
− Software Version / Firmware Version
− Signal Information
You can get information about the signal status.
Press the ENTER/OK button with Signal Information
selected. The technical information for signal status is
displayed.
− Service / Service ID / Multiplex / Network / Bit error
level / Signal Strength
− Software Upgrade (Option)
To keep your product up-to-date with new digital television
features then software upgrades are periodically broadcast
as part of the normal television signal. It will automatically
detect these signals and display the software upgrade
banner. You are given the option to install the upgrade.
Software Inforamtion
Press the ENTER/OK button, then the current software
version is shown. To display the software version
information, press the ENTER/OK button again.
Manual Upgrade
Press the ENTER/OK button to search for new software
from the currently broadcasting channels.
Standby Mode upgrade : On / Off
Press the ENTER/OK button. To continue software
upgrade with master power on, Select On by pressing
the ▲ or ▼ button.
45 minutes after entering standby mode, a manual
upgrade is automatically conducted. Since the power
of the unit is turned on internally, the screen may be
on slightly for the PDP product. This phenomenon may
continue for more than 1 hour until the software upgrade
is completed.
Continued...
Digital Text : Enable
Time Zone
System
Setup
Move
Enter
Return
Product Information
Signal Information
Software Upgrade
Common Interface
Reset
System
Move
Enter
Return
Software Version: T_BDXPDEU00_0710
Firmware Version: T_STDEU7_102c
Product Information
Return
Service: ?
Service ID: 0000
Multiplex: ? (TSID 0000,ONID 0000)
Network: ? (ID 0000)
Bit error level: 10
Signal Strength: 0
Signal Information
Return
Software Information
Manual Upgrade
Standby Mode upgrade : On
Software Upgrade
Move
Enter
Return
BN68-01094R-00Eng.indd 44 2007-05-22 ¿ÀÀü 9:27:37