Smart Signage User Manual (By Model) This manual provides information about your Smart Signage including supported types and product specifications per model. QBN (QB43N QB49N QB55N QB65N QB75N) QMN (QM43N QM49N QM55N QM65N QM75N QM85N QM98N) The color and the appearance may differ depending on the product, and the content in the manual is subject to change without prior notice to improve the performance. Recommended hours of use per day for the QBN models is less than 16 hours.
Table of contents Preparations Specifications Checking the Components 3 General 15 Parts Q*43N/Q*49N/Q*55N/Q*65N/Q*75N QM85N QM98N Anti-theft Lock 4 4 5 6 7 Preset Timing Modes 17 Ports Q*43N/Q*49N/Q*55N/Q*65N/Q*75N QM85N/QM98N 8 8 9 License Appendix 19 Control menu 10 Q*43N/Q*49N/Q*55N/Q*65N/Q*75N/QM98N 10 QM85N 11 Before Installing the Product (Installation Guide) Tilting Angle and Rotation Ventilation 12 12 12 Installing the Wall Mount Preparing before installing Wall-Mount Installing the
Chapter 01 Preparations Checking the Components "" Contact the vendor where you purchased the product if any components are missing. "" The appearance of the components may differ from the images shown. Quick Setup Guide Warranty card (Not available in some locations) Regulatory guide Power cord "" A stand is not provided with the product. To install a stand, you can purchase one separately. "" The RS232C adapter can be used to connect to another monitor using the D-SUB (9-pin) type RS232C cable.
Parts "" The color and shape of parts may differ from what is shown. Specifications are subject to change without notice to improve quality. Q*43N/Q*49N/Q*55N/Q*65N/Q*75N Remote sensor Parts Remote sensor Power button Description Press a button on the remote control pointing at the sensor on the front of the product to perform the corresponding function.
QM85N "" The color and shape of parts may differ from what is shown. Specifications are subject to change without notice to improve quality. Buttons Description Power on the product. Network box mounting hole If you press the displayed. button when the product is turned on, the control menu will be "" To exit the OSD menu, press and hold the Speaker button for at least one second. Move to the upper or lower menu. You can also adjust the value of an option. Move to the left or right menu.
QM98N "" The color and shape of parts may differ from what is shown. Specifications are subject to change without notice to improve quality. Parts ON/OFF Spacer logo Description Do not pull on the spacer logo using force. The logo may tear or break off. Press a button on the remote control pointing at the bottom of the product face to perform the function. The remote control sensor is located on the bottom of the product.
Anti-theft Lock "" An anti-theft lock allows you to use the product securely even in public places. "" The locking device shape and locking method depend on the manufacturer. Refer to the user guide provided with your anti-theft locking device for details. "" The following images are for reference only. Real-life situations may differ from what is shown in the images. "" This function may not be supported depending on the model.
Ports Port Description Connect to a USB memory device. Q*43N/Q*49N/Q*55N/Q*65N/Q*75N "" The color and shape of parts may differ from what is shown. Specifications are subject to change without notice to improve quality. QBN QM43N / QM49N / QM55N / QM65N / QM75N USB 1 ¨(1.0A) "" The USB ports on the product accept a maximum constant current of 1.0A. If the maximum value is exceeded, USB ports may not work. Connects to MDC using a LAN cable.
QM85N/QM98N "" The color and shape of parts may differ from what is shown. Specifications are subject to change without notice to improve quality. Port Description Connects to MDC using a LAN cable. (10/100 Mbps) RJ45 QM85N "" Use Cat7(*STP Type) cable for the connection. *Shielded Twist Pair. Connect to a USB memory device. USB 1 ¨(1.0A) QM98N "" The USB ports on the product accept a maximum constant current of 1.0A. If the maximum value is exceeded, USB ports may not work.
Control menu Buttons Description Power off the product. Q*43N/Q*49N/Q*55N/Q*65N/Q*75N/ QM98N Power Off Select the connected input source. "" The power button is located on the bottom of the product. "" If you press the button on the product when the product is turned on, the control menu will be displayed. •• With the control menu screen displayed, briefly press the power button to move the cursor to Power Off , and then press and hold the power button to turn off the product.
QM85N Buttons "" If you press the button on the product when the product is turned on, the control menu will be displayed. Home Description Enter MagicInfo or URL Launcher mode. •• Move the power button up to select Home in the control menu. Select the connected input source. Source Home •• Move the power button right to select Source in the control menu. When the list of input sources is displayed, move the power button left or right to select the desired input source. Next, press the power button.
Before Installing the Product (Installation Guide) Ventilation "" Contact Samsung Customer Service Centre for further details. Installation on a Perpendicular Wall To prevent injury, this apparatus must be securely attached to the floor/wall in accordance with the installation instructions. A Minimum 40 mm •• Ensure that an authorised installation company installs the wall mount. B Ambient temperature: Under 35 °C •• Otherwise, it may fall and cause personal injury.
Installing the Wall Mount Preparing before installing Wall-Mount To install a wall-mount from another manufacturer, use the Holder-Ring. Installing the Wall Mount •• The wall mount kit (sold separately) allows you to mount the product on the wall. •• The provided image is only for reference. For detailed information on installing the wall mount, see instructions provided with the wall mount. •• We recommend you contact a technician for assistance when installing the wall mount bracket.
Wall Mount Kit Specifications (VESA) •• Samsung wall mount kits contain a detailed installation manual and all parts necessary for assembly are provided. "" Install your wall mount on a solid wall perpendicular to the floor. To install the product on the other wall area, contact the nearest agency. If you install the product on a slanted wall, it may fall and result in severe personal injury.
Chapter 02 Specifications General Model Name Panel QB43N / QM43N QB49N / QM49N QB55N / QM55N Size 43 CLASS (42.5 inches / 107.9 cm) 49 CLASS (48.5 inches / 123.2 cm) 55 CLASS (54.6 inches / 138.7 cm) Display area 941.184 mm (H) x 529.416 mm (V) 37.1 inches (H) x 20.8 inches (V) 1073.78 mm (H) x 604.0 mm (V) 42.3 inches (H) x 23.8 inches (V) 1209.6 mm (H) x 680.4 mm (V) 47.6 inches (H) x 26.8 inches (V) Model Name Panel QB65N / QM65N QB75N / QM75N Size 65 CLASS (64.5 inches / 163.
AC100-240V~ 50/60Hz Refer to the label at the back of the product as the standard voltage can vary in different countries. Power Supply Operating Temperature: 32 °F – 104 °F (0 °C – 40 °C) * For installing the housing, keep the internal temperature at 40 °C or below. Humidity: 10% – 80%, non-condensing Storage Temperature: -4 °F – 113 °F (-20 °C – 45 °C) Humidity: 5% – 95%, non-condensing * Applicable before the product package is unpacked.
Preset Timing Modes "" This product can be set to only one resolution for each screen size to obtain the optimum picture quality due to the nature of the panel. Using a resolution other than the specified resolution may degrade the picture quality. To avoid this, it is recommended that you select the optimum resolution specified for your product. "" Horizontal Frequency The time required to scan a single line from the left to the right side of the screen is called a horizontal cycle.
The screen will automatically be adjusted if a signal that belongs to the following standard signal modes is transmitted from your PC. If the signal transmitted from the PC does not belong to the standard signal modes, the screen may be blank with the power indicator on. In such a case, change the settings according to the following table by referring to the graphics card user manual.
Chapter 03 Appendix License Manufactured under license from Dolby Laboratories. Dolby, Dolby Audio, Pro Logic, and the double-D symbol are trademarks of Dolby Laboratories. The terms HDMI and HDMI High-Definition Multimedia Interface, and the HDMI Logo are trademarks or registered trademarks of HDMI Licensing LLC in the United States and other countries. Open Source Licence Notice In the case of using open source software, Open Source Licences are available on the product menu.
