SIDEBYSIDE REFRIGERATOR RS2533SW RS2555SW RS2555SL RS2577SW RS2577SL Write the model and serial number here: Model # Serial # Find these numbers on a label of the refrigerator cabinet at the left hand-side wall. OWNER'S MANUALAND INSTALLATION CONTENTS SAFETY WARNING OPERATING SIGNS ............................................................... 2 INSTRUCTIONS ........................................................ 4 SETTINGUPTHE REFRIGERATOR........................................................
• Before operating the appliance, please read this manual thoroughly and retain it for your reference. //_ • Because refrigeratormay these following differ slightlyfrom operatingthose instructionscover described invarious this manual models, the characteristicsof your • The applianceis not intendedfor use by childrenor infirmpersonswithoutadultsupervision. WARNING • Childrenshouldbe supervisedto ensurethat they do not playwith the appliance.
//_ CAUTION SIGNS Q o not overfill the refrigerator with food. • When you open the door, an item may fall out and cause personal injury or material damage. f Do not put bottlesor glass containersin the freezer. • When the contents freeze, the glass may break and cause personal injury. If the wall socket is loose, do not insert the power plug. • There is a risk of electric shock or fire. Q Do notdisconnectthe powercord bypullingon it.
Once you have performedthe following steps, your refrigeratorshould be fully operational. If not, check the power supply and electricity source. If you have any questions, contact your 8AMSUNG service center. Place the refigerator in an appropriate location with reasonable clearance between the wall and the refigerator. (refer to installationinstructionsin this mannal) Set the temperature control to the coldest temperature and wait for an hour.
RS2533 PowerFreeze SAMSUNG PowerCool Child Lock Ice Watel iiiiiiiiiiiiiiiiiiiii_, RS2555, RS2577 FREEZER TEME BUTTON Toset the freezer temperature, press the button repeatedly to change the set temperature in sequence between 8°F and -14°F. POWER FREEZER BUTTON peeds up the freezing process in I FRIDGE TEMP. BUTTON Toset the fridge temperature, press the button repeatedlyto change the set temperature in sequence between 34°F and 46°F.
or RS2533 RS2555,RS2577 Freezer Temp. indicates the current freezer temperature. Fridge Temp. indicates the current refrigerator temperature. Quick Cool, Thaw, and Select show the status of the CoolSelect Zone TM Drawer l-,ower I-reeze r_ • This light is on when you press the Power Freeze button. Press this button to quickly return the freezer to the set temperature. • if you need much ice, you can get ice faster. • Press the button again to cancel the Power Freezer mode.
Freezer Refrigerator • The freezer temperature can be set between 8°F and -14°F. • Press the Freezer Temp. button repeatedly until the desired set temperature is shown in the temperature display. • The temperaturedisplay changes in sequence between 8°F and -14°F. When the display reaches 8°F,it returns to -14°F. • After five seconds, the display reverts to the actual freezer temperature. The unit will then work to adjust to the new desired temperature.
Freezer Xtra SpaceTM Door Bin -Ice Maker- E z Light Ice Chute Glass Shelf -Wire Shelf Light Switch -Tilt Pockets '_ Wire Drawers Front Leg Cover RS2533 Model RS2577Model with CoolSelectZoneTM RS2555Model with CoolSelectZoneTM Refrigerator Water Filter -- Dairy Compartment Light (upper) -- Wine Rack (RS2577) Spill-proof glass Shelf -- Gallon Door Bin -- BeverageStation(RS2577) Light Switch Foldable Shelf (RS2577) Twin Deodorizer -- Lights (lower) (RS2555,2577) Egg Container CoolSelect
FROZEN FOOD STORAGE IN FREEZER Xtra SpaceTM • Can be used for frozen foods such as pizza, pasta, burri tos, and fajitas. • In order to prevent odor penetrationto the ice, stored food should be wrapped securely. ...... Tempered Glass Shelf( Wire Shelf) • Can be used to store all types of frozen food. Door Bin (Tilt Pocket) • Can be used for small packagesof frozen food. Plastics Drawer (Wire Drawer ) • Can be used to store meat and dry foods.
CHILLED FOOD STORAGE IN REFRIGERATOR Tempered Spill Proof Glass Shelf • Can be used to store all types of chilledfood. • Safe and hard to break resistant. • Circular marks on the glass surface are a normal phenomenon. Chilled Bin or CoolSelect ZoneTM Drawer • Helps to preserve the taste of food and prolongs its freshness. Use to store cheese, meat, poultry,fish or any other foods used quickly. iiii ............. 8 Fruit & Vegetable Drawer (Upper and Lower) • Is used to store fruits and vegetables.
"Select" Button (RS2555, RS2577) iiiiiil_ ......... SoftFreeze • When "Soft Freeze" is chosen, the temperatureon the digtal panel displays 23°F(-5°C)regardless of the set temperatured the refrigerator. • "Soft-Freeze"temperature helps keep meats and fishes fresh longer. • Can cut meat easily without drips. 2 Chill • When "Chill" is chosen, the temperature d the CoolSelect ZoneTM Drawer is kept at 30°F(-1°C)regardless d the set refrigerator temperature.
"Quick Cool" Button • You can use the Quick Cool feature with the CoolSelectZoneTM. • "QuickCool" allows 1~3 canned beverages to cool within 60 min. • To cancel this option, press the "Quick Cool" button again. CoolSelectZoneTM returns to the previous temperature. • When "Quick Cool" ends, it returns to the "Cool" temperaturesetting. NOTE Dependingon the beverages,the cool-down time may vary. \_ck _o Cool Soft Freeze Ohill NOTE el • For "Quick Cool" option, food stored in the CoolSelectZoneTM Draw
Ice Maker Bucket ......• Removethe bucket by lifting up and pulling out. GlassShelf • Pulltheshelfoutasfaras itgoes.Thenliftitupand remove it. 5 Door Bin • Hold the door bin with both hands and then lift it up. Front Leg Cover • Open the freezer and refrigerator doors, remove three screws and detach the cover. • To reassemblethe cover leg front, put it back to original position and tighten the three screws. Plastic Drawer (Wire Drawer) • Removethe drawer by pulling it out and lifting it up Ib .........
To openthe BeverageStationTM,holdthe BeverageStationTMdoor handleand pull it downward. • The BeverageStationTMis convenient and reducesenergyconsumption, becauseyou do not need to open the refrigeratordoor to accessstored beveragesand snacks. • It is recommendedthat you use the BeverageStationTMfor storingmost frequentlyneededfoods • The door of the Beverage Station should never be removed.The Beverage Station cannot function if its door is missing.
TwinDeodorizer • Removethe coverwith a fiat bladescrewdriveras shown. • Takeoutthe cartridgefrom the cover and soak it in cleanand warm water at least than4 hrs.Completelydry outthe cartridgewith sunlightfor at least 8 hrs in an open area. idge • Repeatthis processonceor twicea year. NOTE • If it is dried in a confinedarea,odor may be spreadto that area. • Keepthe childrenaway fromyellow water,they may drinkwater. Before changing the interiorthe light, unplug theyour refrigeratorfrom the power supply.
INTERIORLIGHT IN THE FREEZER. The freezer light is located in the bottom of the auger motor case. Use a screwdriver to remove the light cover ((_). NOTE :2, Change the bulb with a new one (@) Reattach the light cover To replace freezer and refrigerator light bulbs (Bulb size E14, 30 watts), please contact ADDRESS : SAMSUNG ELECTRONICS AMERICA, INC. SERVICE DIVISION 400 VALLEY ROAD, SUITE 201, MT.
Checking the Dimensions of your Entrance Door Check the dimensions of your entrance door to determine whether the refrigerator can pass through it. Model Capacity RS2533, RS2555, RS2577 25.2 (Cu. Ft) Width Dimension (inch) Case Height Depth 36 without Hinge 69 with Hinge with door without door 70 35 29 Selecting the Location for the Refrigerator • Select a location with easy access to the water supply. • Select a location with enough space for the refrigerator.
When you can remave the doors if, you can remove the doors. Removing the Front Leg Cover Open the freezer and refrigerator doors, and then take off the front leg cover by turning the three screws counter-clockwise. FRONT LEG COVER / _. _ tj SCREW L_ Separating the Water Supply Line from the Refrigerator 1) Remove the screw from clamp (®). 2) Remove the water tube by pressing the coupler (@) and pulling the water tube (qb) away. NOTE Donotcut thewatertubebutseparateitfromthecoupler.
• Liftthedoorstraight up. NOTE • Becareful nottopinchthewatertubing andwireharness onthedoor. • Place doors onaprotected surface. Removing the Freezer Door 1) With the door closed, remove the upper hinge cover (qb) using a screwdriver, and then disconnect the wires (@). i 2) Remove bolts (®) and ground screw (®) counter-clockwise, and take off the upper hinge (®) along the arrow (®). Take care when removing the door to ensure that it does not fall on you.
Removing the Refrigerator Door 1) With the door closed, remove the upper hinge cover (qb) using a screwdriver, and then disconnect the wires (@). I 2) Remove bolts (®) and ground screw (@) counter-clockwise, and take off the upper hinge (®) in the direction of the arrow (®). Take care when removing the door to ensure that it does not fall on you. 3) Remove the door from the lower hinge (@) by 4) Remove the lower hinge (®) from the bracket lifting the door (®).
Reattaching the Freezer Door 1) Insert the lower hinge (qb)in the bracket lower 2) Reattach the freezer door by inserting the hose hinge (@). (®) in the lower side of the door into the hole in the lower hinge (®) and pulling the hose down. d:P 3) Insert the upper hinge shaft (®) into the hole (®). After levelling between the upper hinge hole (@) and the hole of the cabinet (®). Reattach bolts (®) and screw (®) in a clockwise direction. (9 4) Connect the wires.
Reattaching the Refrigerator Door Insert the lower hinge (qb) in the bracket lower 2) Place the hole in the refrigerator door (®) over hinge (®). the lower hinge (®). J 3) Insert the upper hinge shaft (®) into the hole (®). After levelling between the upper hinge hole (@) and the hole of the cabinet (®). Reattach bolts (®) and screw (®) in the clockwise direction. 4) Connect the wires.
Reattaching the Water Supply Line 1) While pressing the front face of coupler (@), insert the water line (qb) in the coupler. 2) Tighten the screw on the clamp (®). I Reattaching the Front Leg Cover Put on the front leg cover by turning the three screws clockwise, as shown in the figure.
Please level the refrigerator first. The doors will be uneven if the refrigerator is not level. Case 1) Freezer door is lower than that of the refrigerator Insert a straight screwdriver (-) (¢) into a slot of the control lever (@), turn it clockwise and level the refrigerator. DRIVER(-) °.,°°.J -.,j Case 2) Freezer door is higher than that of the refrigerator (_ CONTROL LEVER Insert a straight screwdriver (-) (¢) into a slot of the control lever (@), turn it clockwise and level the refrigerator.
Making small adjustments between doors. If the door of the freezer is lower than that of the If the door of freezer is higher than that of the refrigerator, refrigerator. f _, f tdjustment part J Please open the doors and adjust the doors as follows: 1) Release the nut (@)on the lower hinge until the upper end of the bolt (@). (_ When you release the nut(@), use enclosed hex wrench (@)to turn the bolt(@) a little counterNOTE clockwise to make the nut(@) loose with your fingers.
1) In order to operate the ice maker properly, water pressure of 20 ~125 psi is required. In this range a 170 cc paper cup can be filled in 10 secs. 2) The water filter removes particles. It does not sterilize or destroy any micro-organisms. 3) If the refrigerator is installed in area with low water pressure (below 20psi), you should install a booster pump to compensate for the low pressure.
Connect the water tube to the refrigerator. 1 Connect to the 3/16" white plastic tube on the back of the refrigerator. Nut 2) Slip the compression nut onto the white plastic tube. 3) Screw the union into the white plastic tube and tighten the '_J_ compression nut. @ Union }leeve Do not overtighten the compression nut. NOTE Nut 4) Silp the compression sleeve and compression nut on copper tubing as shown. Tighten the comperssion nut onto the union. 5) Turn water on and check for any leakege.
Removeany residualmatterinsidethewatersupplyline afterinstallingfilter. 1 ) Turn on the main water supply & shut-off valve of the water supply line. 2) Run water through the dispenser until the water runs clear (6~7 minutes). This will clean the water supply system and clear air from the lines. 3) Additional flushing may be required in some households. ICE 4) Open the refrigerator door and check if water leaks around the water filter.
Adjust the amount of water supplied. 1) In order to set the display panel to the option mode, press the Freeze Temp. and Power Cool buttons at the same time for about 12 seconds until the temperature display panel switches to the option mode and you hear a beep. 2) A number under "Fridge Temp." corresponds to the option number. Press the Fridge Temp. button to increase the number and the Power Cool button to decrease the number. Set the option number 3.
The refrigerator does not work at all or it does not chill sufficiently ° Check that the power plug is properly connected. ° Is the temperature control on the display panel set to the correct temperature? Try seting it to a lower temperature.
SAMSUNG REFRIGERATOR (18 Cubic Feet and Larger Capacity) This SAMSUNG brand product, as supplied and distributed by Samsung ElectronicsAmerica, Inc.
ADDRESS : SAMSUNG ELECTRONICS SERVICE DIVISION TELEPHONE: AMERICA, INC. 400 VALLEY ROAD, SUITE 201, MT.
