User Manual

88_ operating
6. If you need to enter the IP Address, Subnet Mask, Gateway, and DNS manually, press the [User
Config] button on the IP Address screen. Then, select the [IP Address], [Subnet Mask], [Gateway],
and [DNS] buttons in turn and, using the keypad, enter the appropriate values. When you are done
with each entry, select the [OK] button on the keypad.
7. After entering the values for all four parameters, press the
[Apply] button.
TEMPERATURE UNIT CONVERTER
Lets you set the temperature display to Fahrenheit or Centigrade. The unit you select applies to the
Freezer / Fridge set temperature and the temperature displayed by the Weather function.
1. Press the
button in the bottom right corner of the Settings list.
2. Select the Temperature Unit Converter °C or °F button in the Settings list.
USA
CANADA
DA68-02935A-10.indb 88 2018. 7. 9. �� 4:54
operating _89
02 OPERATING
DISPENSER LIGHT
Lets you set the operation of the dispenser lamp light.
1. Press the button in the bottom right corner of the Settings list.
2. Select [Dispenser Light] in the Settings list.
USA
CANADA
3. Select the desired dispenser light status, and then press the [Save] button.
• On : The Dispenser lamp is always on.
• Auto : The Dispenser lamp lights up when you use the Dispenser. When you release the
Dispenser lever, the light goes off in 5 seconds.
• Off : The Dispenser lamp does not light up when you use the Dispenser.
DA68-02935A-10.indb 89 2018. 7. 9. �� 4:54
DA68-02935A-11.indd 88 2020-10-16  3:02:43