User Manual

Table Of Contents
English36
Maintenance
Door reversal (applicable models only)
WARNING
Tilting/laying the refrigerator requires minimum of 2 people.
Disconnect power source and water line before reversing the doors.
If the unit is allowed to lay on its back or side for more than an hour, let it stand for 15
minutes after it is returned to the upright position before plugging it in.
Tools required (not provided)
Phillips screwdriver Flat-head screwdriver
7
/16" (11 mm) spanner
(for hinge shaft)
5
/16" (8 mm) socket wrench
(for bolts)
3
/8" (10 mm) socket wrench
(for bolts)
3
/16" (5 mm) Allen wrench
(for middle hinge)
Accessories (provided)
Hinge Cover (L) Middle-Hinge Screw cap Bottom-Hinge Screw cap
CAUTION
Throughout the entire reversing procedure, keep all the small parts (screws, caps, etc.) of
the refrigerator away from children or infants for safety reasons.
Maintenance
Untitled-1 36 2021-05-25  2:18:47