User manual S22D360Q S22D391Q The color and the appearance may differ depending on the product, and the specifications are subject to change without prior notice to improve the performance.
Table Of Contents BEFORE USING THE PRODUCT PREPARATIONS CONNECTING AND USING A SOURCE DEVICE SCREEN SETUP 6 Copyright 6 Icons used in this manual 7 Cleaning 8 Securing the Installation Space 8 Precautions for storage 9 Safety Precautions 9 10 11 13 Symbols Electricity and Safety Installation and Safety Operation and Safety 17 Correct posture to use the product 18 Checking the Contents 18 Checking the Components 19 Parts 19 21 Frontal Buttons Reverse Side 22 Installation 22 23
Table Of Contents CONFIGURING TINT 32 Contrast 32 Configuring Contrast 33 Sharpness 33 Configuring Sharpness 34 Game Mode 34 Configuring Game Mode 35 SAMSUNG MAGIC Bright 35 Configuring SAMSUNG MAGIC Bright 37 SAMSUNG MAGIC Upscale 37 Configuring SAMSUNG MAGIC Upscale 38 Image Size 38 Changing the Image Size 40 HDMI Black Level 40 Configuring the HDMI Black Level Settings 41 Response Time 41 Configuring the Response Time 42 H-Position & V-Position 42 Configuring H-Positi
Table Of Contents COORDINATING OSD SETUP AND RESET INFORMATION MENU AND OTHERS 48 Color Tone 48 Configuring the Color Tone Settings 49 Gamma 49 Configuring Gamma 50 Language 50 Configuring Language 51 Menu H-Position & Menu V-Position 51 Configuring Menu H-Position & Menu VPosition 52 Display Time 52 Configuring Display Time 53 Transparency 53 Changing Transparency 54 Reset All 54 Initializing Settings (Reset All) 55 Eco Saving 55 Configuring Eco Saving 56 Off Timer 56
Table Of Contents 62 Configuring Brightness and Contrast in the Initial Screen INSTALLING THE SOFTWARE 63 Easy Setting Box 63 64 Installing the Software Removing the Software TROUBLESHOOTING GUIDE 65 Requirements Before Contacting Samsung Customer Service Center 65 65 65 Testing the Product Checking the Resolution and Frequency Check the following.
Before Using the Product Copyright The contents of this manual are subject to change without notice to improve quality. © 2014 Samsung Electronics Samsung Electronics owns the copyright for this manual. Use or reproduction of this manual in parts or entirety without the authorization of Samsung Electronics is prohibited. Microsoft and Windows are registered trademarks of Microsoft Corporation. VESA, DPM and DDC are registered trademarks of the Video Electronics Standards Association.
Before Using the Product Cleaning Exercise care when cleaning as the panel and exterior of advanced LCDs are easily scratched. Take the following steps when cleaning. 1. Power off the monitor and computer. 2. Disconnect the power cable from the monitor. Hold the power cable by the plug and do not touch the cable with wet hands. Otherwise, an electric shock may result. 3. Wipe the monitor screen using a clean, soft and dry cloth.
Before Using the Product Securing the Installation Space Ensure some space around the product for ventilation. An internal temperature rise may cause fire and damage the product. Be sure to allow the amount of space as shown below or greater when installing the product. The exterior may differ depending on the product. 3.93inches (10 cm) 3.93inches (10 cm) 3.93 inches (10 cm) 3.93 inches (10 cm) 3.
Before Using the Product Safety Precautions Caution RISK OF ELECTRIC SHOCK DO NOT OPEN Caution: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). THERE ARE NO USER SERVICEABLE PARTS INSIDE. REFER ALL SERVICING TO QUALIFIED PERSONNEL. This symbol indicates that high voltage is present inside. It is dangerous to make any kind of contact with any internal part of this product.
Before Using the Product Electricity and Safety The following images are for reference only. Real-life situations may differ from what is shown in the images. Warning Do not use a damaged power cable or plug, or a loose power socket. An electric shock or fire may result. Do not plug many products into the same power socket. Otherwise, the socket may overheat and cause a fire. Do not touch the power plug with wet hands. Otherwise, an electric shock may result.
Before Using the Product Caution Do not unplug the power cable when the product is in use. The product may become damaged by an electric shock. Do not use the power cable for products other than authorized products supplied by Samsung. ! An electric shock or fire may result. Keep the power socket where the power cable is connected unobstructed. If any problem occurs in the product, unplug the power cable to completely cut the power to the product.
Before Using the Product Do not install the product on an unstable or vibrating surface (insecure shelf, sloped surface, etc.). The product may fall and break or cause a personal injury. Using the product in an area with excess vibration may damage the product or cause a fire. Do not install the product in a vehicle or a place exposed to dust, moisture (water drips, etc.), oil, or smoke. ! An electric shock or fire may result.
Before Using the Product Put down the product carefully. The product may fall and break or cause a personal injury. ! SAMSUNG ! Installing the product in an unusual place (a place exposed to a lot of fine dust, chemical substances, extreme temperatures or a significant presence of moisture, or a place where the product will operate continuously for an extended period of time) may seriously affect its performance.
Before Using the Product If there is a thunderstorm or lightning strike, turn off the power and disconnect the power cable. ! An electric shock or fire may result. Do not drop objects on the product or apply impact. An electric shock or fire may result. ! Do not move the product by pulling the power cable or any cable. Otherwise, the cable may be damaged and product failure, an electric shock or fire may result. If a gas leakage is found, do not touch the product or power plug.
Before Using the Product Caution Leaving the screen fixed on a stationary image for an extended period of time may cause afterimage burn-in or defective pixels. ! If you are not going to use the product for an extended period of time, activate power-saving mode or a moving-picture screen saver. -_! Disconnect the power cable from the power socket if you do not plan on using the product for an extended period of time (vacation, etc.).
Before Using the Product Do not hold the monitor upside-down or move it by holding the stand. The product may fall and break or cause a personal injury. Do not use humidifiers or stoves around the product. An electric shock or fire may result. Rest your eyes for more than 5 minutes for every 1 hour of product use. Eye fatigue will be relieved. ! Do not touch the screen when the product has been turned on for an extended period of time as it will become hot.
Before Using the Product Correct posture to use the product Use the product in the correct posture as follows: Straighten your back. Allow a distance of 45 to 50 cm between your eye and the screen, and look slightly downward at the screen. Keep your eyes directly in front of the screen. Adjust the angle so light does not reflect on the screen. Keep your forearms perpendicular to your upper arms and level with the back of your hands. Keep your elbows at about a right angle.
1 1.1 Preparations Checking the Contents 1.1.1 Checking the Components Contact the dealer from whom you purchased the product if any item is missing. The appearance of the components and items sold separately may differ from the image shown.
1 1.2 Preparations Parts 1.2.1 Frontal Buttons The color and shape of parts may differ from what is shown. Specifications are subject to change without notice to improve quality. Function Key Guide MENU GAME MODE SOURCE AUTO AU MENU GAME MODE SOURCE AUTO MENU Icons GAME MODE SOURCE Description Open or close the onscreen display (OSD) menu, or return to the parent menu. OSD control lock: Maintain the current settings, or lock the OSD control to prevent unintended changes to settings.
1 Preparations Icons Description Use this button to control the brightness and contrast of the screen. Confirm a menu selection. Pressing the [ ] button when the OSD menu is not displayed will change the input source (Analog/HDMI). If you power on the product or change the input source by pressing the [ ] button, a message that shows the changed input source will appear at the top left corner of the screen. Press the [AUTO] button to automatically adjust the screen settings.
1 Preparations 1.2.2 Reverse Side The color and shape of parts may differ from what is shown. Specifications are subject to change without notice to improve quality. Port Description Connects to the DC power adapter. Connect to a source device using an HDMI cable. Connect to a PC using the D-SUB cable.
1 1.3 Preparations Installation 1.3.1 Attaching the Stand Before assembling the product, place the product down on a flat and stable surface so that the screen is facing downwards. The exterior may differ depending on the product. Insert the stand neck into the stand base in the direction shown in the figure. Check that the stand neck is firmly connected. Tightly fasten the connecting screw at the bottom of the stand base.
1 Preparations 1.3.2 Removing the Stand The exterior may differ depending on the product. Place a soft cloth over the table to protect the product and place the product onto the cloth so that the front of the product faces downwards. While holding the stand neck with one hand, pound the other fisted hand down onto the top of the stand base in the direction of the arrow to detach the stand base. Turn the connecting screw at the bottom of the stand base to separate it.
1 Preparations 1.3.3 Adjusting the Product Tilt The color and shape of parts may differ from what is shown. Specifications are subject to change without notice to improve quality. -1° ( ±2°) ~ 20 ° (±2 °) You can adjust the tilt of your monitor. Hold the lower part of the product and adjust the tilt carefully.
1 Preparations 1.3.4 Anti-theft Lock An anti-theft lock allows you to use the product securely even in public places. The locking device shape and locking method depend on the manufacturer. Refer to the user guide provided with your anti-theft locking device for details. The lock device is sold separately. The color and shape of parts may differ from what is shown. Specifications are subject to change without notice to improve quality.
2 2.1 Connecting and Using a Source Device Before Connecting 2.1.1 Pre-connection Checkpoints Before connecting a source device, read the user manual provided with it. The number and locations of ports on source devices may differ from device to device. Do not connect the power cable until all connections are completed. Connecting the power cable during connection may damage the product. 2.2 Check the types of ports at the back of the product you want to connect. Connecting and Using a PC 2.
2 Connecting and Using a Source Device Connection Using the HDMI Cable Do not connect the power cable before connecting all other cables. Ensure you connect a source device first before connecting the power cable. HDMI IN 1 Connect the HDMI cable to the [HDMI IN] port on the back of the product and the HDMI port on the PC. 2 Connect the DC power adapter to the product and a power socket. Next, turn on the power switch on the PC. (For details, refer to "2.2.2 3 Press [ Connecting the Power".
2 Connecting and Using a Source Device 2.2.2 Connecting the Power Connecting parts may differ in different products. The exterior may differ depending on the product. Power connection using integrated DC power adapter Connect the DC power adapter to the [DC14V] port on the back of the product and to the power outlet. DC14V The input voltage is switched automatically. Power connection using detachable DC power adapter Connect the power cable to the DC power adapter.
2 Connecting and Using a Source Device 2.2.3 Driver Installation You can set the optimum resolution and frequency for this product by installing the corresponding drivers. An installation driver is contained on the CD supplied with the product. If the file provided is faulty, visit the Samsung homepage (http://www.samsung.com/) and download the file. 1 2 3 4 Insert the user manual CD provided with the product into the CD-ROM drive.
2 Connecting and Using a Source Device 2.2.4 Setting Optimum Resolution An information message about setting optimum resolution will appear if you power on the product for the first time after purchase. Select a language on the product and change the resolution on your PC to the optimum setting.
3 Screen Setup Configure the screen settings such as brightness. A detailed description of each function is provided. Refer to your product for details. 3.1 Brightness You can adjust the general brightness of the picture. (Range: 0~100) A higher value will make the picture appear brighter. SAMSUNG This menu is not available when MAGIC Bright is set to Dynamic Contrast mode. This menu is not available when Eco Saving is enabled.
3 3.2 Screen Setup Contrast Adjust the contrast between the objects and background. (Range: 0~100) A higher value will increase the contrast to make the object appear clearer. SAMSUNG This option is not available when MAGIC Bright is in Cinema or Dynamic Contrast mode. This menu is not available when Game Mode is enabled. The functions available on the monitor may vary depending on the model. Refer to the actual product. 3.2.
3 3.3 Screen Setup Sharpness Make the outline of objects more clear or blurry. (Range: 0~100) A higher value will make the outline of objects clearer. SAMSUNG This option is not available when MAGIC Bright is in Cinema or Dynamic Contrast mode. SAMSUNG This menu is not available when MAGIC Upscale is in Mode1 or Mode2. This menu is not available when Game Mode is enabled. The functions available on the monitor may vary depending on the model. Refer to the actual product. 3.3.
3 3.4 Screen Setup Game Mode Configure the product screen settings for game mode. Use this feature when playing games on a PC or when a game console such as PlayStation™ or Xbox™ is connected. The functions available on the monitor may vary depending on the model. Refer to the actual product. 3.4.1 Configuring Game Mode 1 Press any button on the front of the product to display the Key guide. Next, press [ MENU ] to display the corresponding menu screen.
3 3.5 Screen Setup SAMSUNG MAGIC Bright This menu provides an optimum picture quality suitable for the environment where the product will be used. This menu is not available when Eco Saving is enabled. This menu is not available when Game Mode is enabled. The functions available on the monitor may vary depending on the model. Refer to the actual product. You can customize the brightness to suit your preferences. 3.5.
3 Screen Setup PICTURE 100 Brightness 75 Contrast 60 Sharpness Dynamic Custom 50 SAMSUNG Standard Off 50 SAMSUNG Movie Off 2200 Custom Wide 0 Game Mode MAGIC Bright MAGIC Upscale Image Size Set to an optimum picture quality suitable for the working environment. AUTO SAMSUNG When the external input is connected through HDMI and PC/AV Mode is set to AV, MAGIC Bright has four automatic picture settings (Dynamic, Standard, Movie and Custom) that are preset at the factory.
3 3.6 Screen Setup SAMSUNG MAGIC Upscale SAMSUNG MAGICUpscale function can enhance the layers of the picture details and the vividness of the picture. The function has more obvious effects on low-resolution pictures. SAMSUNG This menu is not available when MAGIC Bright is in Cinema or Dynamic Contrast mode. This menu is not available when Game Mode is enabled. The functions available on the monitor may vary depending on the model. Refer to the actual product. 3.6.
3 3.7 Screen Setup Image Size Change the picture size. The functions available on the monitor may vary depending on the model. Refer to the actual product. 3.7.1 Changing the Image Size 1 Press any button on the front of the product to display the Key guide. Next, press [ MENU ] to display the corresponding menu screen. 2 3 Press [ ] to move to PICTURE and press [ Press [ ] to move to Image Size and press [ ] on the product. ] on the product. The following screen will appear.
3 Screen Setup In AV mode PICTURE Brightness 100 Contrast 75 Sharpness 60 Game Mode Off SAMSUNG MAGIC Bright SAMSUNG MAGIC Upscale Image Size 4:3 Auto 16:9 Wide Screen Fit Choose the size and aspect ratio of the picture displayed on screen. Wide AUTO 4 5 4:3: Display the picture with an aspect ratio of 4:3. Suitable for videos and standard broadcasts. 16:9: Display the picture with an aspect ratio of 16:9.
3 3.8 Screen Setup HDMI Black Level If a DVD player or set-top box is connected to the product via HDMI, image quality degradation (contrast/ color degradation, black level, etc.) may occur, depending on the connected source device. In such case, HDMI Black Level can be used to adjust the image quality. If this is the case, correct the degraded picture quality using HDMI Black Level. This function is only available in HDMI mode.
3 3.9 Screen Setup Response Time Accelerate the panel response rate to make video appear more vivid and natural. It is best to set Response Time to Standard or Faster when you are not viewing a movie. The functions available on the monitor may vary depending on the model. Refer to the actual product. 3.9.1 Configuring the Response Time 1 Press any button on the front of the product to display the Key guide. Next, press [ MENU ] to display the corresponding menu screen.
3 Screen Setup 3.10 H-Position & V-Position H-Position: Move the screen to the left or right. V-Position: Move the screen up or down. This menu is available in Analog mode only. This menu is only available when Image Size is set to Screen Fit in AV Mode. When a 480P or 576P or 720P or 1080P signal is input in AV mode and the monitor can display normally, select Screen Fit to adjust horizontal position in 0-6 levels. The functions available on the monitor may vary depending on the model.
3 Screen Setup 3.11 Coarse Adjust the screen frequency. This menu is available in Analog mode only. The functions available on the monitor may vary depending on the model. Refer to the actual product. 3.11.1 Adjusting Coarse 1 Press any button on the front of the product to display the Key guide. Next, press [ MENU ] to display the corresponding menu screen. 2 3 Press [ ] to move to PICTURE and press [ Press [ ] to move to Coarse and press [ ] on the product. ] on the product.
3 Screen Setup 3.12 Fine Fine-adjust the screen to obtain a vivid picture. This menu is available in Analog mode only. The functions available on the monitor may vary depending on the model. Refer to the actual product. 3.12.1 Adjusting Fine 1 Press any button on the front of the product to display the Key guide. Next, press [ MENU ] to display the corresponding menu screen. 2 3 Press [ ] to move to PICTURE and press [ Press [ ] to move to Fine and press [ ] on the product.
4 Configuring Tint A detailed description of each function is provided. Refer to your product for details. SAMSUNG Adjust the tint of the screen. This menu is not available when MAGIC Bright is set to Cinema or Dynamic Contrast mode. This menu is not available when Game Mode is enabled. 4.1 Red Adjust the value of the color red in the picture. (Range: 0~100) A higher value will increase the intensity of the color. 4.1.
4 4.2 Configuring Tint Green Adjust the value of the color green in the picture. (Range: 0~100) A higher value will increase the intensity of the color. 4.2.1 Configuring Green 1 Press any button on the front of the product to display the Key guide. Next, press [ MENU ] to display the corresponding menu screen. 2 3 Press [ ] to move to COLOR and press [ Press [ ] to move to Green and press [ ] on the product. ] on the product. The following screen will appear.
4 4.3 Configuring Tint Blue Adjust the value of the color blue in the picture. (Range: 0~100) A higher value will increase the intensity of the color. 4.3.1 Configuring Blue 1 Press any button on the front of the product to display the Key guide. Next, press [ MENU ] to display the corresponding menu screen. 2 3 Press [ ] to move to COLOR and press [ Press [ ] to move to Blue and press [ ] on the product. ] on the product. The following screen will appear.
4 4.4 Configuring Tint Color Tone Adjust the general color tone of the picture. SAMSUNG This option is not available when MAGIC Bright is in Cinema or Dynamic Contrast mode. This menu is not available when Game Mode is enabled. The functions available on the monitor may vary depending on the model. Refer to the actual product. 4.4.1 Configuring the Color Tone Settings 1 Press any button on the front of the product to display the Key guide.
4 4.5 Configuring Tint Gamma Adjust the mid-range brightness (Gamma) of the picture. SAMSUNG This option is not available when MAGIC Bright is in Cinema or Dynamic Contrast mode. This menu is not available when Game Mode is enabled. The functions available on the monitor may vary depending on the model. Refer to the actual product. 4.5.1 Configuring Gamma 1 Press any button on the front of the product to display the Key guide. Next, press [ MENU ] to display the corresponding menu screen.
5 5.1 Coordinating OSD A detailed description of each function is provided. Refer to your product for details. Language Set the menu language. A change to the language setting will only be applied to the onscreen menu display. It will not be applied to other functions on your PC. 5.1.1 Configuring Language 1 Press any button on the front of the product to display the Key guide. Next, press [ MENU ] to display the corresponding menu screen.
5 5.2 Coordinating OSD Menu H-Position & Menu V-Position Menu H-Position: Move the menu position to the left or right. Menu V-Position: Move the menu position up or down. 5.2.1 Configuring Menu H-Position & Menu V-Position 1 Press any button on the front of the product to display the Key guide. Next, press [ MENU ] to display the corresponding menu screen. 2 3 Press [ ] to move to MENU SETTINGS and press [ ] on the product.
5 5.3 Coordinating OSD Display Time Set the on-screen display (OSD) menu to automatically disappear if the menu is not used for a specified period of time. Display Time can be used to specify the time after which you want the OSD menu to disappear. 5.3.1 Configuring Display Time 1 Press any button on the front of the product to display the Key guide. Next, press [ MENU ] to display the corresponding menu screen.
5 5.4 Coordinating OSD Transparency Set the transparency for the menu windows. 5.4.1 Changing Transparency 1 Press any button on the front of the product to display the Key guide. Next, press [ MENU ] to display the corresponding menu screen. 2 3 Press [ ] to move to MENU SETTINGS and press [ Press [ ] to move to Transparency and press [ ] on the product. ] on the product. The following screen will appear.
6 6.1 Setup and Reset A detailed description of each function is provided. Refer to your product for details. Reset All Return all the settings for the product to the default factory settings. 6.1.1 Initializing Settings (Reset All) 1 Press any button on the front of the product to display the Key guide. Next, press [ MENU ] to display the corresponding menu screen. 2 3 Press [ ] to move to SETUP&RESET and press [ Press [ ] to move to Reset All and press [ ] on the product. ] on the product.
6 6.2 Setup and Reset Eco Saving The Eco Saving function reduces power consumption by controlling the electric current used by the monitor panel. SAMSUNG This menu is not available when MAGIC Bright is in Dynamic Contrast mode. This menu is not available when Game Mode is enabled. 6.2.1 Configuring Eco Saving 1 Press any button on the front of the product to display the Key guide. Next, press [ MENU ] to display the corresponding menu screen.
6 6.3 Setup and Reset Off Timer You can set the product to automatically turn off. 6.3.1 Configuring Off Timer 1 Press any button on the front of the product to display the Key guide. Next, press [ MENU ] to display the corresponding menu screen. 2 3 4 Press [ ] to move to SETUP&RESET and press [ ] on the product. Press [ ] to move to Off Timer and press [ ] on the product. Press [ ] to move to Off Timer and press [ ] on the product. The following screen will appear.
6 Setup and Reset 6.3.2 Configuring Turn Off After 1 Press any button on the front of the product to display the Key guide. Next, press [ MENU ] to display the corresponding menu screen. 2 3 4 Press [ ] to move to SETUP&RESET and press [ Press [ ] to move to Off Timer and press [ Press [ ] to move to Turn Off After and press [ ] on the product. ] on the product. ] on the product. The following screen will appear.
6 6.4 Setup and Reset PC/AV Mode Set PC/AV Mode to AV. The picture size will be enlarged. This option is useful when you view a movie. This function does not support Analog mode. Supplied for the wide models only such as 16:9 or 16:10. If the monitor (when set to HDMI) is in power saving mode or is displaying the message Check Signal Cable, press the MENU button to display the On Screen Display(OSD). You can select PC or AV. 6.4.
6 6.5 Setup and Reset Key Repeat Time Control the response rate of a button when the button is pressed. 6.5.1 Configuring Key Repeat Time 1 Press any button on the front of the product to display the Key guide. Next, press [ MENU ] to display the corresponding menu screen. 2 3 Press [ ] to move to SETUP&RESET and press [ Press [ ] to move to Key Repeat Time and press [ ] on the product. ] on the product. The following screen will appear.
6 6.6 Setup and Reset Source Detection You can activate Source Detection. 6.6.1 Configuring Source Detection 1 Press any button on the front of the product to display the Key guide. Next, press [ MENU ] to display the corresponding menu screen. 2 3 Press [ ] to move to SETUP&RESET and press [ Press [ ] to move to Source Detection and press [ ] on the product. ] on the product. The following screen will appear. SETUP&RESET Decide how input sources will be detected.
7 7.1 INFORMATION Menu and Others A detailed description of each function is provided. Refer to your product for details. INFORMATION View the current input source, frequency and resolution. 7.1.1 Displaying INFORMATION 1 Press any button on the front of the product to display the Key guide. Next, press [ MENU ] to display the corresponding menu screen. 2 Press [ ] to move to INFORMATION. The current input source, frequency and resolution will appear.
7 7.2 INFORMATION Menu and Others Configuring Brightness and Contrast in the Initial Screen Adjust the Brightness, Contrast using the [ ] buttons when the initial screen (that displays no menu screen) is displayed. Brightness : SAMSUNG This menu is not available when MAGIC Bright is set to Dynamic Contrast mode. This menu is not available when Eco Saving is enabled. Contrast : 1 SAMSUNG This option is not available when MAGIC Bright is in Cinema or Dynamic Contrast mode.
8 8.1 Installing the Software Easy Setting Box Easy Setting Box "Easy Setting Box" enables users to use the monitor by partitioning multiple sections. 8.1.1 Installing the Software 1 2 Insert the installation CD into the CD-ROM drive. Select the "Easy Setting Box" setup program. If the pop-up screen for the software installation does not appear on the main screen, find and double-click the "Easy Setting Box" setup file on the CD-ROM. 3 4 When the Installation Wizard appears, click Next.
8 Installing the Software 8.1.2 Removing the Software Click Start, select Settings/Control Panel, and then double-click Add or Remove Programs. Select "Easy Setting Box" from the program list and click the Add/Delete button.
9 9.1 Troubleshooting Guide Requirements Before Contacting Samsung Customer Service Center 9.1.1 Testing the Product Before calling Samsung Customer Service Center, test your product as follows. If the problem persists, contact Samsung Customer Service Center. Check if your product is operating normally by using the product test function. If the screen is turned off and the power indicator blinks even though the product is properly connected to a PC, perform a self-diagnosis test.
9 Troubleshooting Guide Screen issue Issues The power LED is off. The screen will not switch on. Solutions Check that the power cable is connected properly. (Refer to "2.2 Connecting and Using a PC") The message Check Signal Cable appears. Check that the cable is properly connected to the product. (Refer to "2.2 Connecting and Using a PC") Check that the device connected to the product is powered on. Not Optimum Mode is displayed.
9 Troubleshooting Guide Source device issue Issues Solutions A beeping sound is heard when my PC is booting. If a beeping sound is heard when your PC is booting, have your PC serviced. The LED lights on the frame of the product may be seen depending on the user's viewing angle. The light is harmless to people and has no bearing on product features and performance. The product is safe to use.
9 9.2 Troubleshooting Guide Q&A Question How can I change the frequency? Answer Set the frequency on your graphics card. Windows XP: Go to Control Panel Themes Display Settings Appearance and Advanced Monitor, and adjust Refresh rate under Monitor settings. Windows ME/2000: Go to Control Panel Settings Advanced Display Monitor, and adjust Refresh rate under Monitor settings.
9 Troubleshooting Guide Question How can I change the resolution? Answer Windows XP: Go to Control Panel Themes Display Appearance and Settings, and adjust the resolution. Windows ME/2000: Go to Control Panel Display Settings, and adjust the resolution. Windows Vista: Go to Control Panel Personalization Personalize Appearance and Display Settings, and adjust the resolution.
10 Specifications 10.1 General Model Name Panel S22D360Q Size 21.5 Inches (54 cm) Display area 476.64 mm (H) x 268.11 mm (V) S22D391Q 18.77 Inches (H) x 10.56 Inches (V) Pixel Pitch 0.24825 mm (H) x 0.24825 mm (V) 0.00977 Inches (H) x 0.00977 Inches (V) Power Supply Dimensions (W x H x D) / Weight This product supports 100-240 V. Since the standard voltage may differ from country to country, please check the label on the back of the product. Without Stand 513.7 x 322.8 x 81.7 mm 20.2 x 12.
10 Specifications 10.2 PowerSaver The power-saving function of this product reduces power consumption by switching off the screen and controlling the power LED status if the product is not used for a specified period of time. The power is not turned off in power-saving mode. To switch the screen back on, press any key on the keyboard or move the mouse. Power-saving mode functions only when the product is connected to a PC that has a power-saving function.
10 Specifications 10.3 Standard Signal Mode Table This product can be set to only one resolution for each screen size to obtain the optimum picture quality due to the nature of the panel. Therefore, a resolution other than the specified resolution may degrade the picture quality. To avoid this, it is recommended that you select the optimum resolution specified for the screen size of your product. Check the frequency when you exchange a CDT monitor (connected to a PC) for an LCD monitor.
10 Specifications Resolution Horizontal Frequency (kHz) Vertical Frequency (Hz) Pixel Clock (MHz) Sync Polarity (H/V) VESA, 1280 x 720 45.000 60.000 74.250 +/+ VESA, 1280 x 800 49.702 59.810 83.500 -/+ VESA, 1280 x 1024 63.981 60.020 108.000 +/+ VESA, 1280 x 1024 79.976 75.025 135.000 +/+ VESA, 1440 x 900 55.935 59.887 106.500 -/+ VESA, 1600 x 900RB 60.000 60.000 108.000 +/+ VESA, 1680 x 1050 65.290 59.954 146.250 -/+ VESA, 1920 x 1080p 67.500 60.000 148.
Appendix Contact SAMSUNG WORLD WIDE If you have any questions or comments relating to Samsung products, please contact the SAMSUNG customer care center. NORTH AMERICA U.S.A 1-800-SAMSUNG (726-7864) http://www.samsung.com/us CANADA 1-800-SAMSUNG (726-7864) http://www.samsung.com/ca (English) http://www.samsung.com/ca_fr (French) LATIN AMERICA ARGENTINE 0800 333 3733 http://www.samsung.com.ar BOLIVIA 800-10-7260 http://www.samsung.
Appendix LATIN AMERICA GUATEMALA 1-800-299-0013 http://www.samsung.com/latin (Spanish) http://www.samsung.com/latin_en (English) HONDURAS 800-27919267 http://www.samsung.com/latin (Spanish) http://www.samsung.com/latin_en (English) JAMAICA 1-800-234-7267 http://www.samsung.com NICARAGUA 001-800-5077267 http://www.samsung.com/latin (Spanish) http://www.samsung.com/latin_en (English) MEXICO 01-800-SAMSUNG (726-7864) http://www.samsung.com PANAMA 800-7267 http://www.samsung.
Appendix EUROPE CZECH 800 - SAMSUNG (800-726786) http://www.samsung.com Samsung Electronics Czech and Slovak, s.r.o. V Parku 2343/24, 148 00 - Praha 4 DENMARK 70 70 19 70 http://www.samsung.com EIRE 0818 717100 http://www.samsung.com ESTONIA 800-7267 http://www.samsung.com/ee FINLAND 030-6227 515 http://www.samsung.com FRANCE 01 48 63 00 00 http://www.samsung.com/fr GERMANY 0180 6 SAMSUNG bzw. http://www.samsung.com 0180 6 7267864* (*0,20 €/Anruf aus dem dt.
Appendix EUROPE SLOVAKIA 0800 - SAMSUNG (0800-726 786) http://www.samsung.com SPAIN 902172678 http://www.samsung.com SWEDEN 0771 726 7864 (SAMSUNG) http://www.samsung.com SWITZERLAND 0848-SAMSUNG (7267864, CHF 0.08/min) http://www.samsung.com/ch (German) http://www.samsung.com/ch_fr (French) U.K 0330 SAMSUNG (7267864) http://www.samsung.com CIS ARMENIA 0-800-05-555 http://www.samsung.com AZERBAIJAN 088-55-55-555 http://www.samsung.com BELARUS 810-800-500-55-500 http://www.samsung.
Appendix ASIA PACIFIC INDIA 1800 3000 8282 1800 266 8282 http://www.samsung.com/in INDONESIA 0800-112-8888 (Toll Free) (021) 56997777 http://www.samsung.com/id JAPAN 0120-327-527 http://www.samsung.com MALAYSIA 1800-88-9999 http://www.samsung.com/my NEW ZEALAND 0800 SAMSUNG (0800 726 786) http://www.samsung.com/nz PHILIPPINES 1-800-10-7267864 [PLDT] http://www.samsung.
Appendix MENA PAKISTAN 0800-Samsung (72678) http://www.samsung.com/pk/ QATAR 800-2255 (800-CALL) http://www.samsung.com/ae (English) http://www.samsung.com/ae_ar (Arabic) SAUDI ARABIA 920021230 http://www.samsung.com/sa SYRIA 18252273 http://www.samsung.com/Levant (English) TUNISIA 80-1000-12 http://www.samsung.com/n_africa TURKEY 444 77 11 http://www.samsung.com U.A.E 800-SAMSUNG (726-7864) http://www.samsung.com AFRICA BOTSWANA 8007260000 http://www.samsung.
Appendix Responsibility for the Pay Service (Cost to Customers) When the service is requested, in spite of in warranty, we may charge you for a visit from a service technician in the following cases. Not a product defect Cleaning of the product, Adjustment, Explanation, Re-installation and etc. If a service technician gives instructions on how to use product or simply adjusts options without disassembling product. If a defect is caused by external environmental factors.
Appendix Correct Disposal Correct Disposal of This Product (Waste Electrical & Electronic Equipment) (Applicable in countries with separate collection systems) This marking on the product, accessories or literature indicates that the product and its electronic accessories (e.g. charger, headset, USB cable) should not be disposed of with other household waste at the end of their working life.
Appendix Terminology OSD (On Screen Display) On screen display (OSD) allows you to customize on-screen settings to optimize the picture quality as required. You can change the screen brightness, tint, size and many other settings using menus displayed on the screen. Gamma The Gamma menu adjusts the grey scale that represents middle tones on the screen. Adjusting the brightness brightens the whole screen, but adjusting Gamma only brightens the medium brightness.
Appendix Resolution Resolution is the number of horizontal pixels and vertical pixels that form a screen. It represents the level of display detail. A higher resolution displays a greater amount of information on the screen and is suitable for performing multiple tasks at the same time. E.g. A resolution of 1920 x 1080 consists of 1920 horizontal pixels (horizontal resolution) and 1080 vertical lines (vertical resolution).
Index B H Before Connecting 26 HDMI Black Level 40 Blue 47 Brightness 31 I Image Size 38 C INFORMATION 61 Checking the Contents 18 Installation 22 Cleaning 7 Coarse 43 Color Tone 48 K Key Repeat Time 59 Connecting and Using a PC 26 Contact SAMSUNG WORLD WIDE 74 Contrast 32 Copyright 6 L Language 50 Correct Disposal 81 Correct posture to use the product 17 O Off Timer 56 D Display Time 52 P Parts 19 E Easy Setting Box 63 PC/AV Mode 58 PowerSaver 71 Eco Saving 55 Q F Q & A 68 Fine 44
Index S Safety Precautions 9 SAMSUNG MAGIC Bright 35 SAMSUNG MAGIC Upscale 37 Sharpness 33 Source Detection 60 Standard Signal Mode Table 72 T Terminology 82 Transparency 53 Index 85