User manual S19E310HY S22E310HY S22E310H S24E310HL S27E310H The color and the appearance may differ depending on the product, and the specifications are subject to change without prior notice to improve the performance.
Table Of Contents BEFORE USING THE PRODUCT PREPARATIONS CONNECTING AND USING A SOURCE DEVICE 7 Copyright 7 Icons used in this manual 8 Cleaning 9 Securing the Installation Space 9 Precautions for storage 10 Safety Precautions 10 11 12 14 Symbols Electricity and Safety Installation and Safety Operation and Safety 18 Correct posture to use the product 19 Checking the Contents 19 Checking the Components 20 Parts 20 21 22 24 Control Panel Direct Key guide Function Key Guide Reverse Si
Table Of Contents SCREEN SETUP 35 Brightness 35 Configuring Brightness 36 Contrast 36 Configuring Contrast 37 Sharpness 37 Configuring Sharpness 38 Eye Saver Mode 38 Configuring Eye Saver Mode 39 Game Mode 39 Configuring Game Mode 40 SAMSUNG MAGIC Bright 40 Configuring SAMSUNG MAGIC Bright 42 SAMSUNG MAGIC Angle (S19E310HY / S22E310HY / S22E310H / S27E310H) 42 Configuring SAMSUNG MAGIC Angle 44 SAMSUNG MAGIC Upscale 44 Configuring SAMSUNG MAGIC Upscale 46 Image Size 46 C
Table Of Contents CONFIGURING TINT COORDINATING OSD SETUP AND RESET 55 Red 55 Configuring Red 56 Green 56 Configuring Green 57 Blue 57 Configuring Blue 58 Color Tone 58 Configuring the Color Tone Settings 59 Gamma 59 Configuring Gamma 60 Language 60 Configuring Language 61 Menu H-Position & Menu V-Position 61 Configuring Menu H-Position & Menu VPosition 62 Display Time 62 Configuring Display Time 63 Transparency 63 Changing Transparency 64 Reset All 64 Initializing
Table Of Contents 69 Key Repeat Time 69 Configuring Key Repeat Time 70 Source Detection 70 Configuring Source Detection 71 Power LED On 71 Configuring Power LED On 72 INFORMATION 72 Displaying INFORMATION 73 Configuring Brightness, Contrast and Sharpness from the Initial Screen INSTALLING THE SOFTWARE 74 Easy Setting Box 74 75 Installing the Software Removing the Software TROUBLESHOOTING GUIDE 76 Requirements Before Contacting Samsung Customer Service Center 76 76 76 Testing the
Table Of Contents APPENDIX 89 Responsibility for the Pay Service (Cost to Customers) 89 89 89 Not a product defect A Product damage caused by customer's fault Others 90 Correct Disposal 90 Correct Disposal of This Product (Waste Electrical & Electronic Equipment) 91 Terminology INDEX Table Of Contents 6
Before Using the Product Copyright The contents of this manual are subject to change without notice to improve quality. © 2015 Samsung Electronics Samsung Electronics owns the copyright for this manual. Use or reproduction of this manual in parts or entirety without the authorization of Samsung Electronics is prohibited. Microsoft, Windows and Windows NT are registered trademarks of Microsoft Corporation. VESA, DPM and DDC are registered trademarks of the Video Electronics Standards Association.
Before Using the Product Cleaning Exercise care when cleaning as the panel and exterior of advanced LCDs are easily scratched. Take the following steps when cleaning. 1. Power off the monitor and computer. 2. Disconnect the power cord from the monitor. Hold the power cable by the plug and do not touch the cable with wet hands. Otherwise, an electric shock may result. 3. Wipe the monitor screen using a clean, soft and dry cloth.
Before Using the Product Securing the Installation Space Ensure some space around the product for ventilation. An internal temperature rise may cause fire and damage the product. Be sure to allow the amount of space as shown below or greater when installing the product. The exterior may differ depending on the product. 10 cm (3.93 inches) 10 cm (3.93 inches) 10 cm (3.93 inches) 10 cm (3.93 inches) 10 cm (3.
Before Using the Product Safety Precautions Caution RISK OF ELECTRIC SHOCK DO NOT OPEN Caution: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). THERE ARE NO USER SERVICEABLE PARTS INSIDE. REFER ALL SERVICING TO QUALIFIED PERSONNEL. This symbol indicates that high voltage is present inside. It is dangerous to make any kind of contact with any internal part of this product.
Before Using the Product Electricity and Safety The following images are for reference only. Real-life situations may differ from what is shown in the images. Warning Do not use a damaged power cord or plug, or a loose power socket. An electric shock or fire may result. Do not plug many products into the same power socket. Otherwise, the socket may overheat and cause a fire. Do not touch the power plug with wet hands. Otherwise, an electric shock may result.
Before Using the Product Caution Do not unplug the power cord when the product is in use. The product may become damaged by an electric shock. Do not use the power cord for products other than authorized products supplied by Samsung. ! An electric shock or fire may result. Keep the power socket where the power cord is connected unobstructed. If any problem occurs in the product, unplug the power cable to completely cut the power to the product.
Before Using the Product Do not install the product on an unstable or vibrating surface (insecure shelf, sloped surface, etc.). The product may fall and break or cause a personal injury. Using the product in an area with excess vibration may damage the product or cause a fire. Do not install the product in a vehicle or a place exposed to dust, moisture (water drips, etc.), oil, or smoke. ! An electric shock or fire may result.
Before Using the Product Put down the product carefully. The product may fall and break or cause a personal injury. ! SAMSUNG ! Installing the product in an unusual place (a place exposed to a lot of fine dust, chemical substances, extreme temperatures or a significant presence of moisture, or a place where the product will operate continuously for an extended period of time) may seriously affect its performance.
Before Using the Product If there is a thunderstorm or lightning strike, turn off the power and disconnect the power cable. ! An electric shock or fire may result. Do not drop objects on the product or apply impact. An electric shock or fire may result. ! Do not move the product by pulling the power cord or any cable. Otherwise, the cable may be damaged and product failure, an electric shock or fire may result. If a gas leakage is found, do not touch the product or power plug.
Before Using the Product Caution Leaving the screen fixed on a stationary image for an extended period of time may cause afterimage burn-in or defective pixels. ! If you are not going to use the product for an extended period of time, activate power-saving mode or a moving-picture screen saver. -_! Disconnect the power cord from the power socket if you do not plan on using the product for an extended period of time (vacation, etc.).
Before Using the Product Do not hold the monitor upside-down or move it by holding the stand. The product may fall and break or cause a personal injury. Do not use humidifiers or stoves around the product. An electric shock or fire may result. Rest your eyes for more than 5 minutes for every 1 hour of product use. Eye fatigue will be relieved. ! Do not touch the screen when the product has been turned on for an extended period of time as it will become hot.
Before Using the Product Correct posture to use the product Use the product in the correct posture as follows: Straighten your back. Allow a distance of 45 to 50 cm between your eye and the screen, and look slightly downward at the screen. Keep your eyes directly in front of the screen. Adjust the angle so light does not reflect on the screen. Keep your forearms perpendicular to your upper arms and level with the back of your hands. Keep your elbows at about a right angle.
1 1.1 Preparations Checking the Contents 1.1.1 Checking the Components Contact the dealer from whom you purchased the product if any item is missing. The appearance of the components and items sold separately may differ from the image shown.
1 1.2 Preparations Parts 1.2.1 Control Panel The color and shape of parts may differ from what is shown. Specifications are subject to change without notice to improve quality. To activate the button on the product, press the [ ] etching position exactly. Press the other position may cause wrong action.
1 Preparations 1.2.2 Direct Key guide For guidance on shortcut keys, the OSD (On Screen Display) will appear if you press any button of [ ]. Brightness Auto Adjustment Features Eye Saver Mode Off Press [ ] button: Adjust Brightness. Press [ ] button: Adjust the screen settings automatically. Changing the resolution in Display Properties will activate the Auto Adjustment function. This function is only available in Analog mode. Press [ ] button: Display Function Key Guide.
1 Preparations 1.2.3 Function Key Guide To enter the main menu or to use other items, press the [ You can exit by pressing the [ ] button to display the Function Key Guide. ] button again. Return Press button: Move to the item you want. The description for each item will appear when the focus changes. Press [ ] button: The selected item will be applied. Icons Description Select [ ] to change the input signal by pressing the [ ] button on the Function Key Guide screen.
1 Preparations Icons Description Select [ ] by pressing the [ ] button on the function key guide screen. Press to enable or disable Eye Saver Mode. The items below are not available if the Eye Saver Mode function is enable. SAMSUNG SAMSUNG Brightness, Game Mode, MAGIC Bright, MAGIC Angle PICTURE COLOR SETUP&RESET Eco Saving Plus Select [ ] to turn the Monitor off by pressing the [ function key guide screen.
1 Preparations 1.2.4 Reverse Side The color and shape of parts may differ from what is shown. Specifications are subject to change without notice to improve quality. The exterior may differ depending on the product. Port About ports Connect to a source device using an HDMI cable. Connect to a PC using the D-SUB cable. Connects to the DC power adapter.
1 1.3 Preparations Installation 1.3.1 Attaching the Stand Before assembling the product, place the product down on a flat and stable surface so that the screen is facing downwards. The exterior may differ depending on the product. Insert the stand neck into the stand base in the direction shown in the figure. Check that the stand neck is firmly connected. Tightly fasten the connecting screw at the bottom of the stand base.
1 Preparations 1.3.2 Removing the Stand The exterior may differ depending on the product. Place a soft cloth over the table to protect the product and place the product onto the cloth so that the front of the product faces downwards. While holding the stand neck with one hand, pound the other fisted hand down onto the top of the stand base in the direction of the arrow to detach the stand base. Turn the connecting screw at the bottom of the stand base to separate it.
1 Preparations 1.3.3 Adjusting the Product Tilt The color and shape of parts may differ from what is shown. Specifications are subject to change without notice to improve quality. -2° (±2.0°) - 20° (±2.0°) You can adjust the tilt of your monitor. Hold the lower part of the product and adjust the tilt carefully.
1 Preparations 1.3.4 Installing a Wall-mount Kit or Desktop Stand Power the product off and remove the power cable from the power socket. 1 2 A 3 4 B A Attach the wall-mount kit or desktop stand here B Bracket (sold separately) Align the grooves and tightly fasten the screws on the bracket on the product with the corresponding parts on the wall-mount kit or desktop stand you want to attach. Notes Using a screw longer than the standard length can damage the internal components of the product.
1 Preparations 1.3.5 Anti-theft Lock An anti-theft lock allows you to use the product securely even in public places. The locking device shape and locking method depend on the manufacturer. Refer to the user guide provided with your anti-theft locking device for details. The lock device is sold separately. The color and shape of parts may differ from what is shown. Specifications are subject to change without notice to improve quality.
2 2.1 Connecting and Using a Source Device Before Connecting 2.1.1 Pre-connection Checkpoints Before connecting a source device, read the user manual provided with it. The number and locations of ports on source devices may differ from device to device. Do not connect the power cable until all connections are completed. Connecting the power cable during connection may damage the product. 2.2 Check the types of ports at the back of the product you want to connect. Connecting and Using a PC 2.
2 Connecting and Using a Source Device Connection Using the HDMI Cable Do not connect the power cable before connecting all other cables. Ensure you connect a source device first before connecting the power cable. HDMI IN 1 Connect the HDMI cable to the [HDMI IN] port on the back of the product and the HDMI port on the PC. 2 Connect the DC power adapter to the product and a power socket. Next, turn on the power switch on the PC. (For details, refer to "2.2.2 3 Connecting the Power".
2 Connecting and Using a Source Device 2.2.2 Connecting the Power Connecting parts may differ in different products. The exterior may differ depending on the product. Power connection using integrated DC power adapter Connect the DC power adapter to [DC 14V] port on the back of the product and to the power outlet. DC 14V The input voltage is switched automatically. Power connection using detachable DC power adapter Connect the power cable to the DC power adapter.
2 Connecting and Using a Source Device 2.2.3 Driver Installation You can set the optimum resolution and frequency for this product by installing the corresponding drivers. An installation driver is contained on the CD supplied with the product. If the file provided is faulty, visit the Samsung homepage (http://www.samsung.com/) and download the file. 1 2 3 4 Insert the user manual CD provided with the product into the CD-ROM drive.
2 Connecting and Using a Source Device 2.2.4 Setting Optimum Resolution An information message about setting optimum resolution will appear if you power on the product for the first time after purchase. Select a language on the product and change the resolution on your PC to the optimum setting. 6HWXS *XLGH 7KH RSWLPDO UHVROXWLRQ IRU WKLV PRQLWRU LV DV IROORZV ****x**** **Hz 8VH WKH DERYH VHWWLQJV WR VHW WKH UHVROXWLRQ RQ \RXU 3& (QJOLVK 5HWXUQ 1 2 Select a language by pressing the [ ] button.
3 Screen Setup Configure the screen settings such as brightness. A detailed description of each function is provided. Refer to your product for details. 3.1 Brightness You can adjust the general brightness of the picture. (Range: 0~100) A higher value will make the picture appear brighter. SAMSUNG This menu is not available when MAGIC Bright is set to Dynamic Contrast mode. This menu is not available when Eco Saving Plus is enabled. This menu is not available when Eye Saver Mode is enabled.
3 3.2 Screen Setup Contrast Adjust the contrast between the objects and background. (Range: 0~100) A higher value will increase the contrast to make the object appear clearer. SAMSUNG This option is not available when MAGIC Bright is in Cinema or Dynamic Contrast mode. This menu is not available when Game Mode is enabled. The functions available on the monitor may vary depending on the model. Refer to the actual product. 3.2.
3 3.3 Screen Setup Sharpness Make the outline of objects more clear or blurry. (Range: 0~100) A higher value will make the outline of objects clearer. SAMSUNG This option is not available when MAGIC Bright is in Cinema or Dynamic Contrast mode. SAMSUNG This menu is not available when MAGIC Upscale is in Mode1 or Mode2. This menu is not available when Game Mode is enabled. The functions available on the monitor may vary depending on the model. Refer to the actual product. 3.3.
3 3.4 Screen Setup Eye Saver Mode Set to an optimum picture quality suitable for eye relaxation. TÜV Rheinland “Low Blue Light Content” is a certification for products which meet requirements for lower blue light levels. When Eye Saver Mode is 'On', the blue light that wavelength is around 400nm will decrease, and it will provide an optimum picture quality suitable for eye relaxation.
3 3.5 Screen Setup Game Mode Configure the product screen settings for game mode. Use this feature when playing games on a PC or when a game console such as PlayStation™ or Xbox™ is connected. This menu is not available when Eye Saver Mode is enabled. The functions available on the monitor may vary depending on the model. Refer to the actual product. 3.5.1 Configuring Game Mode 1 When the Function Key Guide appears, select [ ] by pressing [ ] button on the DOME Type JOG Button.
3 3.6 Screen Setup SAMSUNG MAGIC Bright This menu provides an optimum picture quality suitable for the environment where the product will be used. This menu is not available when Eco Saving Plus is enabled. This menu is not available when Game Mode is enabled. This menu is not available when Eye Saver Mode is enabled. The functions available on the monitor may vary depending on the model. Refer to the actual product. You can customize the brightness to suit your preferences. 3.6.
3 Screen Setup PICTURE 100 Brightness 75 Contrast 60 Sharpness Eye Saver Mode Game Mode Dynamic Standard Custom 50 Off 50 SAMSUNG Movie Off 2200 SAMSUNG Custom Wide 0 MAGIC Bright MAGIC Angle PICTURE 100 Brightness 75 Contrast Game Mode Dynamic Standard Custom 50 Off 50 SAMSUNG Movie Off 2200 SAMSUNG Custom Wide 0 MAGIC Bright MAGIC Upscale Set to an optimum picture quality suitable for the working environment.
3 3.7 Screen Setup SAMSUNG MAGIC Angle (S19E310HY / S22E310HY / S22E310H / S27E310H) SAMSUNG MAGICAngle allows you to configure the settings to obtain the optimum picture quality according to your viewing angle. SAMSUNG This option is not available when MAGIC Bright is in Cinema or Dynamic Contrast mode. This menu is not available when Game Mode or Eye Saver Mode is enabled. The functions available on the monitor may vary depending on the model. Refer to the actual product.
3 Screen Setup 4 Group View: Select this option for more than one viewer to view from places ① , ④ and ⑤ . Custom: Lean Back Mode 1 will be applied by default if Custom is selected. Move the focus to the desired option by pressing [ Press [ 5 ] button on the DOME Type JOG Button. ] button. The selected option will be applied.
3 3.8 Screen Setup SAMSUNG MAGIC Upscale SAMSUNG MAGICUpscale function can enhance the layers of the picture details and the vividness of the picture. The function has more obvious effects on low-resolution pictures. SAMSUNG This menu is not available when MAGIC Bright is in Cinema or Dynamic Contrast mode. This menu is not available when Game Mode is enabled. The functions available on the monitor may vary depending on the model. Refer to the actual product. 3.8.
3 Screen Setup 4 Move the focus to the desired option by pressing [ Press [ 5 ] button on the DOME Type JOG Button. ] button. The selected option will be applied.
3 3.9 Screen Setup Image Size Change the picture size. The functions available on the monitor may vary depending on the model. Refer to the actual product. 3.9.1 Changing the Image Size 1 When the Function Key Guide appears, select [ ] by pressing [ ] button on the DOME Type JOG Button. Next, press the [ 2 3 ] button. Press [ ] button to move to PICTURE and press [ Press [ ] button to move to Image Size and press [ ] button on the monitor. ] button on the monitor.
3 Screen Setup In AV mode PICTURE Choose the size and aspect ratio of the picture displayed on screen. SAMSUNG MAGIC Upscale Image Size HDMI Black Level Response Time 4:3 16:9 Screen Fit H-Position V-Position Coarse PICTURE Image Size HDMI Black Level Response Time Choose the size and aspect ratio of the picture displayed on screen. 4:3 16:9 Screen Fit H-Position V-Position Coarse Fine PICTURE Choose the size and aspect ratio of the picture displayed on screen.
3 Screen Setup 3.10 HDMI Black Level If a DVD player or set-top box is connected to the product via HDMI, image quality degradation (contrast/ color degradation, black level, etc.) may occur, depending on the connected source device. In such case, HDMI Black Level can be used to adjust the image quality. If this is the case, correct the degraded picture quality using HDMI Black Level. This function is only available in HDMI mode.
3 Screen Setup 4 Normal: Select this mode when there is no contrast ratio degradation. Low: Select this mode to reduce the black level and increase the white level when there is a contrast ratio degradation. Move the focus to the desired option by pressing [ Press [ 5 ] button on the DOME Type JOG Button. ] button. The selected option will be applied. HDMI Black Level may not be compatible with some source devices.
3 Screen Setup 3.11 Response Time (S24E310HL / S27E310H) Accelerate the panel response rate to make video appear more vivid and natural. It is best to set Response Time to Standard or Faster when you are not viewing a movie. The functions available on the monitor may vary depending on the model. Refer to the actual product. 3.11.1 Configuring the Response Time 1 When the Function Key Guide appears, select [ ] by pressing [ ] button on the DOME Type JOG Button.
3 Screen Setup 3.12 H-Position & V-Position H-Position: Move the screen to the left or right. V-Position: Move the screen up or down. This menu is available in Analog mode only. This menu is only available when Image Size is set to Screen Fit in AV Mode. When a 480P or 576P or 720P or 1080P signal is input in AV mode and the monitor can display normally, select Screen Fit to adjust horizontal position in 0-6 levels. The functions available on the monitor may vary depending on the model.
3 Screen Setup PICTURE SAMSUNG MAGIC Upscale Image Size Off Wide HDMI Black Level PICTURE SAMSUNG Wide Image Size 50 H-Position 50 V-Position Use the [ Move the image displayed on the screen up or down. HDMI Black Level V-Position Fine Off MAGIC Upscale H-Position Coarse 4 Move the image displayed on the screen to the left or right. 2200 0 50 50 Coarse 2200 Fine 0 ] buttons to adjust the H-Position or V-Position, then press the [ ] button on the monitor.
3 Screen Setup 3.13 Coarse Adjust the screen frequency. This menu is available in Analog mode only. The functions available on the monitor may vary depending on the model. Refer to the actual product. 3.13.1 Adjusting Coarse 1 When the Function Key Guide appears, select [ ] by pressing [ ] button on the DOME Type JOG Button. Next, press the [ 2 3 ] button. Press [ ] button to move to PICTURE and press [ Press [ ] button to move to Coarse and press [ ] button on the monitor.
3 Screen Setup 3.14 Fine Fine-adjust the screen to obtain a vivid picture. This menu is available in Analog mode only. The functions available on the monitor may vary depending on the model. Refer to the actual product. 3.14.1 Adjusting Fine 1 When the Function Key Guide appears, select [ ] by pressing [ ] button on the DOME Type JOG Button. Next, press the [ 2 3 ] button.
4 Configuring Tint A detailed description of each function is provided. Refer to your product for details. SAMSUNG Adjust the tint of the screen. This menu is not available when MAGIC Bright is set to Cinema or Dynamic Contrast mode. This menu is not available when Game Mode or Eye Saver Mode is enabled. 4.1 Red Adjust the value of the color red in the picture. (Range: 0~100) A higher value will increase the intensity of the color. 4.1.
4 4.2 Configuring Tint Green Adjust the value of the color green in the picture. (Range: 0~100) A higher value will increase the intensity of the color. 4.2.1 Configuring Green 1 When the Function Key Guide appears, select [ ] by pressing [ ] button on the DOME Type JOG Button. Next, press the [ 2 3 ] button. Press [ ] button to move to COLOR and press [ Press [ ] button to move to Green and press [ ] button on the monitor. ] button on the monitor. The following screen will appear.
4 4.3 Configuring Tint Blue Adjust the value of the color blue in the picture. (Range: 0~100) A higher value will increase the intensity of the color. 4.3.1 Configuring Blue 1 When the Function Key Guide appears, select [ ] by pressing [ ] button on the DOME Type JOG Button. Next, press the [ 2 3 ] button. Press [ ] button to move to COLOR and press [ Press [ ] button to move to Blue and press [ ] button on the monitor. ] button on the monitor. The following screen will appear.
4 4.4 Configuring Tint Color Tone Adjust the general color tone of the picture. 4.4.1 Configuring the Color Tone Settings 1 When the Function Key Guide appears, select [ ] by pressing [ ] button on the DOME Type JOG Button. Next, press the [ 2 3 ] button. Press [ ] button to move to COLOR and press [ ] button on the monitor. Press [ ] button to move to Color Tone and press [ ] button on the monitor. The following screen will appear.
4 4.5 Configuring Tint Gamma Adjust the mid-range brightness (Gamma) of the picture. 4.5.1 Configuring Gamma 1 When the Function Key Guide appears, select [ ] by pressing [ ] button on the DOME Type JOG Button. Next, press the [ 2 3 ] button. Press [ ] button to move to COLOR and press [ ] button on the monitor. Press [ ] button to move to Gamma and press [ ] button on the monitor. The following screen will appear.
5 5.1 Coordinating OSD A detailed description of each function is provided. Refer to your product for details. Language Set the menu language. A change to the language setting will only be applied to the onscreen menu display. It will not be applied to other functions on your PC. 5.1.1 Configuring Language 1 When the Function Key Guide appears, select [ ] by pressing [ ] button on the DOME Type JOG Button. Next, press the [ 2 3 ] button.
5 5.2 Coordinating OSD Menu H-Position & Menu V-Position Menu H-Position: Move the menu position to the left or right. Menu V-Position: Move the menu position up or down. 5.2.1 Configuring Menu H-Position & Menu V-Position 1 When the Function Key Guide appears, select [ ] by pressing [ ] button on the DOME Type JOG Button. Next, press the [ 2 3 ] button. Press [ ] button to move to MENU SETTINGS and press [ ] button on the monitor.
5 5.3 Coordinating OSD Display Time Set the on-screen display (OSD) menu to automatically disappear if the menu is not used for a specified period of time. Display Time can be used to specify the time after which you want the OSD menu to disappear. 5.3.1 Configuring Display Time 1 When the Function Key Guide appears, select [ ] by pressing [ ] button on the DOME Type JOG Button. Next, press the [ 2 3 ] button.
5 5.4 Coordinating OSD Transparency Set the transparency for the menu windows. 5.4.1 Changing Transparency 1 When the Function Key Guide appears, select [ ] by pressing [ ] button on the DOME Type JOG Button. Next, press the [ 2 3 ] button. Press [ ] button to move to MENU SETTINGS and press [ Press [ ] button to move to Transparency and press [ ] button on the monitor. ] button on the monitor. The following screen will appear.
6 6.1 Setup and Reset A detailed description of each function is provided. Refer to your product for details. Reset All Return all the settings for the product to the default factory settings. The functions available on the monitor may vary depending on the model. Refer to the actual product. 6.1.1 Initializing Settings (Reset All) 1 When the Function Key Guide appears, select [ ] by pressing [ ] button on the DOME Type JOG Button. Next, press the [ 2 3 ] button.
6 6.2 Setup and Reset Eco Saving Plus The Eco Saving Plus function reduces power consumption by controlling the electric current used by the monitor panel. SAMSUNG This menu is not available when MAGIC Bright is in Dynamic Contrast mode. This menu is not available when Game Mode is enabled. This menu is not available when Eye Saver Mode is enabled. The functions available on the monitor may vary depending on the model. Refer to the actual product. 6.2.
6 6.3 Setup and Reset Off Timer You can set the product to automatically turn off. The functions available on the monitor may vary depending on the model. Refer to the actual product. 6.3.1 Configuring Off Timer 1 When the Function Key Guide appears, select [ ] by pressing [ ] button on the DOME Type JOG Button. Next, press the [ 2 3 Press [ Use the [ ] button. ] button to move to SETUP&RESET and press [ ] button to move to Off Timer, then press the [ ] button on the monitor.
6 Setup and Reset 6.3.2 Configuring Turn Off After 1 When the Function Key Guide appears, select [ ] by pressing [ ] button on the DOME Type JOG Button. Next, press the [ 2 3 4 ] button. Press [ ] button to move to SETUP&RESET and press [ Press [ ] button to move to Off Timer and press [ Press [ ] button to move to Turn Off After and press [ ] button on the monitor. ] button on the monitor. ] button on the monitor. The following screen will appear.
6 6.4 Setup and Reset PC/AV Mode Set PC/AV Mode to AV. The picture size will be enlarged. This option is useful when you view a movie. This function does not support Analog mode. Supplied for the wide models only such as 16:9 or 16:10. If the monitor (when set to HDMI) is in power saving mode or is displaying the message Check Signal Cable, press the MENU button to display the On Screen Display(OSD). You can select PC or AV.
6 6.5 Setup and Reset Key Repeat Time Control the response rate of a button when the button is pressed. The functions available on the monitor may vary depending on the model. Refer to the actual product. 6.5.1 Configuring Key Repeat Time 1 When the Function Key Guide appears, select [ ] by pressing [ ] button on the DOME Type JOG Button. Next, press the [ 2 3 ] button.
6 6.6 Setup and Reset Source Detection You can activate Source Detection. The functions available on the monitor may vary depending on the model. Refer to the actual product. 6.6.1 Configuring Source Detection 1 When the Function Key Guide appears, select [ ] by pressing [ ] button on the DOME Type JOG Button. Next, press the [ 2 3 ] button. Press [ ] button to move to SETUP&RESET and press [ ] button on the monitor.
6 6.7 Setup and Reset Power LED On Configure the settings to enable or disable the power LED located at the lower part of the product. The functions available on the monitor may vary depending on the model. Refer to the actual product. 6.7.1 Configuring Power LED On 1 When the Function Key Guide appears, select [ ] by pressing [ ] button on the DOME Type JOG Button. Next, press the [ 2 3 ] button.
7 7.1 INFORMATION Menu and Others A detailed description of each function is provided. Refer to your product for details. INFORMATION View the current input source, frequency and resolution. The functions available on the monitor may vary depending on the model. Refer to the actual product. 7.1.1 Displaying INFORMATION 1 When the Function Key Guide appears, select [ ] by pressing [ ] button on the DOME Type JOG Button. Next, press the [ 2 Press [ ] button.
7 7.2 INFORMATION Menu and Others Configuring Brightness, Contrast and Sharpness from the Initial Screen When the shortcut button page is displayed, adjust the Brightness, Contrast and Sharpness settings from the initial screen using the DOME Type JOG Button. Brightness : SAMSUNG This menu is not available when MAGIC Bright is set to Dynamic Contrast mode. This menu is not available when Eco Saving Plus is enabled. This menu is not available when Eye Saver Mode is enabled.
8 8.1 Installing the Software Easy Setting Box Easy Setting Box "Easy Setting Box" enables users to use the monitor by partitioning multiple sections. 8.1.1 Installing the Software 1 2 Insert the installation CD into the CD-ROM drive. Select the "Easy Setting Box" setup program. If the pop-up screen for the software installation does not appear on the main screen, find and double-click the "Easy Setting Box" setup file on the CD-ROM. 3 4 When the Installation Wizard appears, click Next.
8 Installing the Software 8.1.2 Removing the Software Click Start, select Settings/Control Panel, and then double-click Add or Remove Programs. Select "Easy Setting Box" from the program list and click the Add/Delete button.
9 9.1 Troubleshooting Guide Requirements Before Contacting Samsung Customer Service Center 9.1.1 Testing the Product Before calling Samsung Customer Service Center, test your product as follows. If the problem persists, contact Samsung Customer Service Center. Check if your product is operating normally by using the product test function. If the screen is turned off and the power indicator blinks even though the product is properly connected to a PC, perform a self-diagnosis test.
9 Troubleshooting Guide Screen issue Issues Solutions The power LED is off. The screen will not switch on. Check that the power cable is connected properly. (Refer to "2.2 Connecting and Using a PC") The message Check Signal Cable appears. Check that the cable is properly connected to the product. (Refer to "2.2 Connecting and Using a PC") Check that the device connected to the product is powered on. Not Optimum Mode is displayed.
9 Troubleshooting Guide Issues There is no image on the screen and the power LED blinks every 0.5 to 1 second. Solutions The product is operating in power-saving mode. Press any key on the keyboard or move the mouse to return to normal operating mode. Source device issue Issues Solutions A beeping sound is heard when my PC is booting. If a beeping sound is heard when your PC is booting, have your PC serviced. The LED lights on the frame of the product may be seen depending on the user's viewing angle.
9 9.2 Troubleshooting Guide Q&A Question How can I change the frequency? Answer Set the frequency on your graphics card. Windows XP: Go to Control Panel Appearance and Themes Advanced Display Settings Monitor, and adjust Refresh rate under Monitor settings. Windows ME/2000: Go to Control Panel Settings Advanced Display Monitor, and adjust Refresh rate under Monitor settings.
9 Troubleshooting Guide Question How can I change the resolution? Answer Windows XP: Go to Control Panel Appearance and Themes Display Settings, and adjust the resolution. Windows ME/2000: Go to Control Panel Display Settings, and adjust the resolution. Windows Vista: Go to Control Panel Appearance and Personalization Personalize Display Settings, and adjust the resolution.
10 Specifications 10.1 General (S19E310HY) Model Name Panel S19E310HY Size 18.5 Inches (47 cm) Display area 409.8 mm (H) x 230.4 mm (V) 16.1 Inches (H) x 9.1 Inches (V) Pixel Pitch 0.300 mm (H) x 0.300 mm (V) 0.011811 Inches (H) x 0.011811 Inches (V) Power Supply AC 100 - 240 V ~ (+/- 10%), 50/60 Hz ± 3 Hz Refer to the label at the back of the product as the standard voltage can vary in different countries. Dimensions (W x H x D) / Weight Without Stand 447.1 x 271.2 x 89.8 mm 17.6 x 10.7 x 3.
10 Specifications 10.2 General (S22E310HY / S22E310H) Model Name Panel S22E310HY / S22E310H Size 21.5 Inches (54 cm) Display area 476.64 mm (H) x 268.11 mm (V) 18.8 Inches (H) x 10.6 Inches (V) Pixel Pitch 0.24825 mm (H) x 0.24825 mm (V) 0.009774 Inches (H) x 0.009774 Inches (V) Power Supply AC 100 - 240 V ~ (+/- 10%), 50/60 Hz ± 3 Hz Refer to the label at the back of the product as the standard voltage can vary in different countries. Dimensions (W x H x D) / Weight Without Stand 513.7 x 308.
10 Specifications 10.3 General (S24E310HL) Model Name Panel S24E310HL Size 23.6 Inches (59 cm) Display area 521.28 mm (H) x 293.22 mm (V) 20.5 Inches (H) x 11.5 Inches (V) Pixel Pitch 0.2715 mm (H) x 0.2715 mm (V) 0.010689 Inches (H) x 0.010689 Inches (V) Power Supply AC 100 - 240 V ~ (+/- 10%), 50/60 Hz ± 3 Hz Refer to the label at the back of the product as the standard voltage can vary in different countries. Dimensions (W x H x D) / Weight Without Stand 561.6 x 335.7 x 93.3 mm 22.1 x 13.
10 Specifications 10.4 General (S27E310H) Model Name Panel S27E310H Size 27 Inches (68 cm) Display area 597.6 mm (H) x 336.15 mm (V) 23.5 Inches (H) x 13.2 Inches (V) Pixel Pitch 0.3114 mm (H) x 0.3114 mm (V) 0.01226 Inches (H) x 0.01226 Inches (V) Power Supply AC 100 - 240 V ~ (+/- 10%), 50/60 Hz ± 3 Hz Refer to the label at the back of the product as the standard voltage can vary in different countries. Dimensions (W x H x D) / Weight Without Stand 643.4 x 385.3 x 95.1 mm 25.3 x 15.2 x 3.
10 Specifications 10.5 PowerSaver The power-saving function of this product reduces power consumption by switching off the screen and making the Power LED blink if the product is not used for a specified period of time. The power is not turned off in power-saving mode. To switch the screen back on, press any key on the keyboard or move the mouse. Power-saving mode functions only when the product is connected to a PC that has a powersaving function.
10 Specifications 10.6 Standard Signal Mode Table This product can be set to only one resolution for each screen size to obtain the optimum picture quality due to the nature of the panel. Therefore, a resolution other than the specified resolution may degrade the picture quality. To avoid this, it is recommended that you select the optimum resolution specified for the screen size of your product. Check the frequency when you exchange a CDT monitor (connected to a PC) for an LCD monitor.
10 Specifications Resolution Horizontal Frequency (kHz) Vertical Frequency (Hz) Pixel Clock (MHz) Sync Polarity (H/V) VESA, 1024 x 768 48.363 60.004 65.000 -/- VESA, 1024 x 768 56.476 70.069 75.000 -/- VESA, 1024 x 768 60.023 75.029 78.750 +/+ VESA, 1280 x 720 45.000 60.000 74.250 +/+ VESA, 1366 x 768 47.712 59.790 85.500 +/+ Resolution Horizontal Frequency (kHz) Vertical Frequency (Hz) Pixel Clock (MHz) Sync Polarity (H/V) IBM, 720 x 400 31.469 70.087 28.
10 Specifications Resolution Horizontal Frequency (kHz) Vertical Frequency (Hz) Pixel Clock (MHz) Sync Polarity (H/V) VESA, 1680 x 1050 65.290 59.954 146.250 -/+ VESA, 1920 x 1080 67.500 60.000 148.500 +/+ Horizontal Frequency The time required to scan a single line from the left to the right side of the screen is called a horizontal cycle. The reciprocal number of a horizontal cycle is called horizontal frequency. Horizontal frequency is measured in kHz.
Appendix Responsibility for the Pay Service (Cost to Customers) When the service is requested, in spite of in warranty, we may charge you for a visit from a service technician in the following cases. Not a product defect Cleaning of the product, Adjustment, Explanation, Re-installation and etc. If a service technician gives instructions on how to use product or simply adjusts options without disassembling product. If a defect is caused by external environmental factors.
Appendix Correct Disposal Correct Disposal of This Product (Waste Electrical & Electronic Equipment) (Applicable in countries with separate collection systems) This marking on the product, accessories or literature indicates that the product and its electronic accessories (e.g. charger, headset, USB cable) should not be disposed of with other household waste at the end of their working life.
Appendix Terminology OSD (On Screen Display) On screen display (OSD) allows you to customize on-screen settings to optimize the picture quality as required. You can change the screen brightness, tint, size and many other settings using menus displayed on the screen. Gamma The Gamma menu adjusts the grey scale that represents middle tones on the screen. Adjusting the brightness brightens the whole screen, but adjusting Gamma only brightens the medium brightness.
Appendix Resolution Resolution is the number of horizontal pixels and vertical pixels that form a screen. It represents the level of display detail. A higher resolution displays a greater amount of information on the screen and is suitable for performing multiple tasks at the same time. E.g. A resolution of 1920 x 1080 consists of 1920 horizontal pixels (horizontal resolution) and 1080 vertical lines (vertical resolution).
Index B H Before Connecting 30 HDMI Black Level 48 Blue 57 Brightness 35 I Image Size 46 C INFORMATION 72 Checking the Contents 19 Installation 25 Cleaning 8 Coarse 53 Color Tone 58 K Key Repeat Time 69 Connecting and Using a PC 30 Contrast 36 Copyright 7 Correct Disposal 90 L Language 60 Correct posture to use the product 18 O D Off Timer 66 Display Time 62 P E Easy Setting Box 74 Eco Saving Plus 65 Eye Saver Mode 38 F Fine 54 G Game Mode 39 Gamma 59 General 81, 82, 83, 84 Green 56 Pa
Index S Safety Precautions 10 SAMSUNG MAGIC Angle 42 SAMSUNG MAGIC Bright 40 SAMSUNG MAGIC Upscale 44 Sharpness 37 Source Detection 70 Standard Signal Mode Table 86 T Terminology 91 Transparency 63 Index 94