Instructions Getting to know your camera ■ Use this camera in the following order. Set up the camera driver Take a picture Insert the USB cable Check the camera’s power Check [Removable Disk] Before connecting the camera to a PC, via the USB cable, you will need to set up the camera driver. Install the camera driver that is contained in Application software CD-ROM. (p.85) Take a picture. (p.15) Insert the supplied USB cable into the PC’s USB port and the camera’s USB connection terminal. (p.
Danger Warning DANGER indicates an imminently hazardous situation which, if not avoided, will result in death or serious injury. WARNING indicates a potentially hazardous situation which, if not avoided, could result in death or serious injury. ■ Do not attempt to modify this camera in any way. To do so may result in fire, injury, electric shock or severe damage to you or your camera. Internal inspection, maintenance and repairs should only be carried out by your dealer or Samsung Camera Service centre.
Caution CAUTION indicates a potentially hazardous situation which, if not avoided, may result in a minor or moderate injury. ■ Leaking, overheating, or damaged battery could result in fire or injury. •Use battery with the correct specification for the camera. •Do not short circuit, heat or dispose of battery in fire. •Do not insert the battery with the polarities reversed. ■ Remove the battery when not planning to use the camera for a long period of time.
Contents ■Sharpness ………………………30 ■Contrast …………………………30 ■Auto Focus type …………………31 ■OSD (On Screen Display) information ………………………31 ●Sound ……………………………32 ■Volume ……………………………32 ■Start up sound ……………………32 ■Shutter sound ……………………32 ■Beep Sound ………………………32 ■AF sound …………………………32 ●Setup 1 ……………………………33 ■File name …………………………33 ■Language …………………………33 ■Setting up the Date/ Time/ Date type…33 ■Imprinting the recording date ……34 ■LCD brightness …………………34 ■Auto Focus lamp …………………34 ■Start up image ……………………34 ●Setup 2 ……
System chart Please check that you have the correct contents before using this product. The contents can vary depending on the sales region. To buy the optional equipment, contact your nearest Samsung dealer or Samsung service centre. < Included items > Camera case DPOF compatible printer (see p.71) User manual, Product warranty Camera strap Software CD (see p.84) Computer (see p.88) PictBridge compatible printer (see p.75) SD memory card / MMC (see p.
Identification of features Front & Top Mode dial Power button Shutter button Speaker Flash Self-timer lamp / Auto focus lamp USB / AV connection terminal Lens / Lens cover DC input connection port Microphone 《6》
Identification of features Back & Bottom Camera status lamp Zoom T button (Digital zoom) Zoom W button (Thumbnail) E (Effects) button Strap eyelet LCD monitor Tripod socket + / - button, Delete button 5 function button Play mode / Printer button 《7》
Identification of features ■ Self-timer lamp Bottom/ 5-function button Icon Status Description For the 2 seconds, the lamp blinks quickly at 0.25-second intervals before taking a picture For the first 8 seconds, the lamp blinks at 1 second intervals. Blinking For the final 2 seconds, the lamp blinks quickly at 0.25second intervals. A picture will be taken after about 10 seconds and 2 Blinking seconds later a second picture will be taken.
Identification of features Connecting to a Power Source ■ Mode icon : Refer to page 15~19 for more information about the camera mode setting. MODE AUTO PROGRAM ASR MANUAL PORTRAIT NIGHT MOVIE - ■ We recommend using battery supplied with the camera. The available batteries are listed below.
Connecting to a Power Source ■ Insert the memory card as shown. ■ Insert the battery as shown - If the camera does not turn on after you have inserted battery, please check whether the battery is inserted with the correct polarity (+ / -). - When the battery chamber cover is opened, do not press the battery chamber cover by force. This may cause damage to the battery chamber cover. ■ There are 4 indicators for battery condition that are displayed on the LCD monitor.
Instructions on how to use the memory card ● Be sure to format the memory card (see p.36) if you are using a newly purchased memory for the first time, if it contains data that the camera cannot recognise, or if it contains images captured with a different camera. ● Turn off the camera power whenever the memory card is being inserted or removed. ● Repeated use of the memory card will eventually reduce the memory card’s performance. Should this be the case, you will need to purchase a new memory card.
Instructions on how to use the memory card INFORMATION ● Don't remove the memory card when the camera status lamp is blinking as this may cause damage to data in the memory card. ■ When using a 256MB MMC (Multi Media Card), the specified shooting capacity will be as follows. These figures are approximate as image capacities can be affected by variables such as subject matter and memory card type. - S730 ■ The camera can use SD/SDHC Memory Cards and MMC (Multi Media Cards).
When Using the Camera for the First Time ■ Charge the rechargeable battery fully before using the camera for the first time. ■ When the camera is turned on for the first time, a menu will be displayed to set date / time, language and battery type in the LCD monitor. This menu will not be displayed after setting up. Set up the date / time, language and battery type before using this camera. ● Setting up the language 1. Select the [Language] menu by pressing the UP / DOWN button and press the RIGHT button.
LCD monitor indicator ■ The LCD monitor displays information about the shooting functions and selections. ① ⑳ ⑲ ⑱ ⑰ ② ⑯ ③ ⑮ ④ ⑭ ⑤ ⑬ ⑥ ⑫ ⑦ ⑪ ⑧ ⑨ ⑩ No. Description 7 Sharpness 8 Auto focus frame p.31 9 Camera shake warning p.20 10 Date/ Time 11 Exposure compensation p.48 12 White Balance p.47 13 ISO 14 Continuous shot 1 Recording mode 2 Aperture Value/ Shutter Speed Icons Page 19 p.17 3 Flash/ Without Sound p.25 / 18 4 Self-timer p.27 5 Macro p.
Starting the recording mode ■ How to use the AUTO mode ( ) Please select this mode for quick and easy picture taking with minimal user interaction. 1. Insert the batteries (p.10). Insert the batteries taking note of the polarity (+ / -). 2. Insert the memory card (p.10). As this camera has a 16MB internal memory, you do not need to insert the memory card. If the memory card is not inserted, an image will be stored in the internal memory.
Starting the recording mode ● Things to watch out for using the ASR mode 1. The digital zoom will not operate in the ASR mode. 2. If the lighting condition is brighter than fluorescent lighting condition, the ASR will not activate. 3. If the lighting condition is darker than in fluorescent lighting condition, camera shake warning indicator ( ) will display. For best results only take pictures in situations where the camera shake warning indicator ( ) is not displayed. 4.
Starting the recording mode ■ How to use the MANUAL mode ( ) You can manually configure all functions with the aperture value and shutter speed. ■ How to use the SCENE mode ( ) Use the menu to easily configure optimal settings for a variety of shooting situations. 1. Select the MANUAL mode by rotating the mode dial. 2. Press the + / - button and menu for the shutter speed and aperture value will display. Up / Down button : changes aperture value Left / Right button : changes shutter speed. 3.
Starting the recording mode ■ Portrait, Night scene mode Select a desired mode by rotating the mode dial. ■ How to use the MOVIE CLIP mode ( ) A movie clip can be recorded for as long as the available recording time of the memory capacity allows. - Portrait : To take a picture of a person. - Night : Use this for shooting still images at night or in other dark conditions. [ PORTRAIT mode ] [ NIGHT mode ] 1. Select the MOVIE CLIP mode by rotating the mode dial.
Starting the recording mode ■ Pausing while recording a movie clip (Successive Recording) This camera allows you to temporarily stop during unwanted scenes, while recording a movie clip. Using this function, you can record your favourite scenes into a movie clip without having to create multiple movie clips. ● Using Successive Recording 1. Press the shutter button and movie clips are recorded for as long as the available recording time. Movie clips will still be recorded if the shutter button is released.
Things to Watch Out for When Taking Pictures ■ Pressing the shutter button down half way. Lightly press the shutter button to confirm focus and flash battery charge. Press the shutter button all way down to take the picture. [ Lightly press the shutter button ] [ Press the shutter button ] ■ The available recording time may vary depending on shooting conditions and camera settings.
Using the camera buttons to set the camera ■ The recording mode function can be set up by using the camera buttons. ZOOM W / T button ● If the menu is not displayed, this button works as the OPTICAL ZOOM or DIGITAL ZOOM button. POWER button ● Used for turning the camera’s power on / off. ● If there is no operation during the specified time, the camera's power will be turned off automatically to save battery life. Refer to page 35 for more information about the auto power off function.
ZOOM W / T button ● WIDE Zoom Optical zoom WIDE INFORMATION : Pressing the ZOOM W button. This will zoom out from the subject i.e. the subject will appear farther away. Pressing the ZOOM W button continuously will set the camera to its minimum zoom setting i.e. the subject appears at its farthest from the camera.
Voice recording ( ) / Voice memo ( ) / UP button ■ While the menu is showing, press the UP button to move up the sub menu. When the menu is not displayed on the LCD monitor, the UP button operates as the voice recording or voice memo button. You can add your voice-over to a stored still image. Refer to page 19 for more information about the voice recording. Macro ( ) / Down button ■ While the menu is showing, press the DOWN button to move from the main menu to a sub menu, or to move down the sub menu.
Macro ( ) / Down button Focus lock ■ Available focusing method, by recording mode (O: Selectable , X: Not selectable, ∞: Infinity focus range) ■ To focus on a subject not positioned in the centre of the picture, use the focus lock function.
Flash ( ) / Left button ■ When the menu is displayed on the LCD monitor, pressing the LEFT button makes the cursor shift to the left tab. ■ When the menu is not displayed on the LCD monitor, the LEFT button operates as the FLASH ( ) button. INFORMATION [ Selecting the Auto flash ] ● Selecting the flash mode 1. Rotate the MODE DIAL to select a RECORDING mode with the exception of Movie clip mode. 2. Press the Flash button until the desired flash mode indicator displays on the LCD monitor. 3.
Flash ( ) / Left button ● Flash mode indicator Icon Flash mode ● Available flash mode, by recording mode Description If the subject or background is dark, the camera flash will operate automatically. X O O X X X X X O O X X O X Auto & Red eye reduction If a subject or background is dark, the camera flash will work automatically and will reduce the red-eye effect by using the red-eye reduction function.
Self-timer ( ) / Right button ■ When the menu is displayed on the LCD monitor, pressing the Right button makes the cursor shift to the right tab. ■ When the menu is not displayed on the LCD monitor, the RIGHT button operates as the Self-timer ( ) button. This function is used when the photographer would also like to be in the image. ● Selecting the self-timer 1. Rotate the MODE DIAL to select a RECORDING mode with the exception of VOICE RECORDING mode. 2.
Using the LCD monitor to set the camera settings ■ You can use the menu on the LCD monitor to set up recording functions. In any mode with the exception of VOICE RECORDING mode, pressing the MENU button displays the menu on the LCD monitor. Mode Menu Sub menu Camera working mode Page Off Volume ※ The menu will not be displayed on the LCD monitor in the following circumstances: - When another button is being operated. - While image data is being processed. - When there is no battery capacity.
Using the LCD monitor to set the camera settings Menu tab Main menu File Sub menu Page Reset Series ENGLISH Menu tab p.33 Main menu Quick View FRANÇAIS DEUTSCH ESPAÑOL ITALIANO Power Off Language PORTUGUÊS DUTCH SVENSKA SUOMI DANSK p.33 BAHASA 07/01/01 SETUP1 Date&Time Imprint LCD AF Lamp Start Image SETUP 2 Sub menu Page Off 0.5sec 1sec 3sec Off 1min 3min 5min 10min - p.35 p.35 LCD Save Off On p.35 Video Out NTSC PAL p.36 POLSKI Magyar Format No Yes p.
How to use the menu Recording ( 1. Turn on the camera and press the MENU button. A menu for each camera mode appears. However, there is no menu for Voice Recording mode ( ). 2. Use the LEFT and RIGHT buttons to navigate through the menus. RECORDING Sharpness Contrast Auto Focus OSD Info Normal Normal Center AF Full Press the LEFT or RIGHT button. Move MEMU Exit SOUND Volume Start Shutter Beep AF Sound Normal Off Sound1 Sound1 On Press the LEFT or RIGHT button.
Recording ( ) [ Auto Focus type ] ■ You can select your preferred Auto Focus type according to the shooting condition. [ OSD (On Screen Display) information ] RECORDING Sharpness Contrast Auto Focus OSD Info Back Center AF Multi AF OK ■ In any mode with the exception of VOICE RECORDING mode, you can check the recording status in the LCD monitor.
Sound ( ) [ Volume ] ■ You can set select a volume of sound, start up sound, shutter sound, warning sound and AF sound. ● [Volume] sub menu: [Off], [Low], [Medium], [High] [ Beep Sound ] SOUND Volume Start Sound Shutter Sound Beep Sound AF Sound Back Off Low Medium High OK Set ■ If you set sound to ON, various sounds will be activated for camera startup, when buttons are pressed, so that you can be aware of the camera operation status.
Setup 1 ( ) [ File name ] [ Language ] ■ This function allows the user to select the file naming format. ■ There is a choice of languages that can be displayed on the LCD monitor. Even if the battery is removed and inserted again, the language setting will be preserved. ● Assigning File Names [Reset] : After using the reset function, the next file name will be set from 0001 even after formatting, deleting all or inserting a new memory card.
Setup 1 ( ) [ Imprinting the recording date ] [ Auto Focus lamp ] ■ There is an option to include DATE / TIME on still images. ■ You can turn on and off the Auto Focus lamp. ● Sub menus [Off] : The DATE & TIME will not be imprinted on the image file. [Date] : Only the DATE will be imprinted on the image file. [Date&Time] : The DATE & TIME will be imprinted on the image file. ● Sub menus [Off] : The AF lamp will not light up in a low light condition.
Setup 2 ( ) [ Quick view ] [ LCD save ] ■ If you enable Quick View before capturing an image, you can view the image you just captured on the LCD monitor for the duration set in the [Quick View] setup. Quick view is possible only with still images. ■ If you set the [LCD save] to On and the camera isn't operated during the specified time, the LCD monitor will be turned off automatically. ● Sub menus [Off] : The quick view function can’t be activated. [0.
Setup 2 ( ) [ Selecting Video out type ] [ Formatting a memory ] ■ The Movie output signal from the camera can be NTSC or PAL. Your choice of output will be governed by the type of device (monitor or TV, etc.) to which the camera is connected. PAL mode can support only BDGHI. ■ This is used for formatting the memory. If you run [Format] on the memory, all images, including the protected images, will be deleted. Be sure to download important images to your PC before formatting the memory.
Setup 2 ( ) E (Effect) button [ Initialisation ] ■ All camera menu and function settings will be restored to their default values. However, values for DATE/ TIME, LANGUAGE, and VIDEO OUT will not be changed. ● Sub menus [No] : Settings will not be restored to their defaults. [Yes] : All settings will be restored to their defaults.
Special Effect (E button) : Colour ■ By using the camera’s digital processor, it is possible to add special effects to your images 1. Press the E button in an available recording mode. 2. Select the menu tab by pressing the Left/ Right button. ■ Custom colour : You can change the R (Red), G (Green) and B (Blue) values of the image.
Special Effect (E button) : Image editing Saturation Special Effect (E button) : FUN Preset focus frames ■ You can change the saturation of the image. Press the E button in an available mode ( , , , , , ). ■ You can make the subject stand out from its surroundings. The subject will be sharp and in focus while making the rest out of focus. ● Press the E button in an available mode ( IMAGE ADJUST , FUN Move E , , , , ).
Special Effect (E button) : FUN ● Moving and changing the focus frame You can change the focus frame after selecting a Range menu. Composite shooting 1. Point the camera towards the subject and compose the image by using the LCD monitor. 2. Press the + / - button. 3. The colour of focus frame turns white. Press the Up / Down / Left / Right button to move the focus frame position. 4. Press the shutter button half way down and the camera is ready for taking a picture.
Special Effect (E button) : FUN ※ Selecting 2 composite shooting 6 ● Changing a part of composite shot before taking the last shot Before taking the last composite shot, you can change a part of composite shot. 6 1. During the composite shots, press the + / - button. 2. A previous image will be deleted and new frame will display. If there is an image taken before, press the + / - button again and a previous image will be deleted again.
Special Effect (E button) : FUN ● Changing a part of composite shot after taking the last shot Photo Frame 1. After taking the last shot , a cursor to select a frame will display. Press the Up / Down / Left / Right button to select the frame. 2. Press the + / - button and an image will be deleted. Composite frame will be activated. 3. Press the Shutter button. You can take other images again by using the Up / Down / Left / Right button and + / - button. 4.
Special Effect :(EFun button) : FUN Select a desired sub menu by pressing the Left / Right button and press the OK button. - + / - button ■ You can use the + / - button to set the following menus. (O : Selectable, X : Not Selectable) : The photo frame will not be added. Page Size ○ ○ ○ ○ ○ ○ ○ ○ p.44 Quality ○ ○ ○ ○ ○ ○ ○ ○ p.45 p.45 Metering X ○ X ○ ○ ○ X * 2○ X X X * 1○ ○ Shooting X X X p.46 ISO X ○ X ○ X X X X p.46 X ○ X ○ X X X ○ p.
+ / - button Size ■ How to use the + / - menu ■ You can select the image size appropriate for your application. 1. Press the + / - button in an available mode 2. Select a desired menu by pressing the Up / Down button. And then a sub menu will display on the left bottom side of the LCD monitor. 6 - S730 Still image mode 6 Movie clip mode SIZE 3072X2304 Up / Down button QUALITY 3072X 2304 Icon Size 3072X 2048 640X480 3072X 1728 2592X 1944 2048X 1536 - 320X240 1024X 768 - - S630 Fine 3.
Quality / Frame rate Metering ■You can select the compression ratio appropriate for your application of the captured images. The higher the compression ratio, the lower the picture quality.
Continuous shot ■ You can select continuous shot, and AEB (Auto Exposure Bracketing). 6 - [Single] : Take one picture only. - [Wise Shot] : 2 images are taken at a time. One is taken in the Fill-In Flash mode and the other is taken in the DRIVE ASR mode. Single - [Continuous] : Images will be taken continuously until the shutter button is released. [ PROGRAM mode ] The shooting capacity depends on the memory. - [AEB] : Take three pictures in a series in different exposures: standard exposure (0.
White balance ■ The white balance control allows you to adjust the colours to appear more natural. If a menu other than the AWB, you can only select the Negative effect menu. : The camera automatically 6 selects the appropriate white balance settings, depending on the prevailing lighting WHITE BALANCE conditions. Auto WB DAYLIGHT : For taking images outside. CLOUDY : For taking images under a cloudy and overcast sky.
Exposure compensation Starting play mode ■ Exposure compensation : This camera automatically adjusts the exposure according to the ambient lighting conditions. You can also select the exposure value by using the + / - button. ■ If the memory card is inserted in the camera, all the camera functions apply only to the memory card.
Starting play mode ■ Movie clip capture function : capture still images from the movie clip. INFORMATION ● Manner mode : Pressing the play mode button for more than 3 seconds changes the buzzer and start-up sound setting to OFF, even though you may have set these to ON. ● Lightly press the shutter button in Play mode to switch to the currently set shooting mode. ● Playing back a movie clip Steps from 1-2 are the same as those to play back a still image. 3.
Starting play mode ● Playing back a recorded voice Steps from 1-2 are the same as those to play back a still image. 3. Select the recorded voice file and press the Play & Pause button to play back a recorded voice file. - To pause a recorded voice file, while playing it / Play back, press the play & pause button again. - To resume playback of the voice file, press the play & pause button. - To rewind the voice file while it is playing, press the LEFT button.
Using the camera buttons to set the camera ■ In Play mode, you can use the buttons on the camera to conveniently set up the Play mode functions. Thumbnail ( ) / Enlargement ( ) button ● You can view multiple pictures, enlarge a selected picture, and crop and save a selected area of an image. ● Thumbnail display 1. While an image is displayed on full screen, press the thumbnail button. 2. The thumbnail display will highlight the image that had been showing at the time the thumbnail mode was selected. 3.
Thumbnail ( ) / Enlargement ( ) button - S730 ■ When the menu is not displayed on the LCD monitor, the UP button operates as the voice memo button. You can add your voice to a stored still image. Image size X12.0 X12.0 X12.0 X10.1 X8.0 X4.0 ● Adding a Voice Memo to a Still Image - S630 Image size Maximum enlargement rate X11.0 X10.9 X11.0 ● Trimming : You can extract part of the image that you want and save it separately. X8.0 X4.0 - Trimming? No 1.
Voice ( ) memo / Up button 5. The ( ) icon will be displayed on the LCD monitor after voice memo recording has finished. - Voice memos can’t be recorded onto movie clip and voice recording files. - A distance of 40cm between you and the camera (microphone) is the best distance to record sound. - The voice memo will be saved in .wav format, but has the same file name as the still image to which it corresponds.
Special Effect (E button) : Resize ■ Change the resolution (size) of pictures taken. Select the [User Image] ( ) to save an image to be the start-up image. The resized image will have a new file name. 1. Press the play mode button and press the E button. 2. Press the LEFT/ RIGHT button and select the [RESIZE] ( ) menu tab. 3. Select a desired sub menu by pressing the UP / DOWN button and press the OK button.
Special Effect (E button) : Rotating an image ■ You can rotate the stored images by various degrees. Once the playback of the rotated picture is finished, it will switch back to the original state. 1. Press the play mode button and press the E button. 2. Press the LEFT / RIGHT button and select the [ROTATE] ( ) menu tab. 3. Select a desired sub menu by pressing the UP / DOWN button.
Special Effect (E button) : Colour ■ Custom colour : You can change the R (Red), G (Green) and B (Blue) values of the image. Colour Filter Custom Color ● With this menu, You can change the colour information of the image (excluding Red, Blue, Green and Yellow) to Black and White colour. Move - Up / Down button : Selects R, G, B - Left / Right button : Change the values Special Effect (E button) : Special Colour OK Set 1. Select ( ) by pressing the Up / Down button.
Special Effect (E button) : Special Colour Colour mask ● With this menu, You can select a part you want to make outstand and the rest part of image is set to black & white colour. SPECIAL COLOR Color Mask Press the OK button and you can set the size and location of the part. Select ( ) and a mark for selecting part will display.
Special Effect (E button) : Image editing ● Saturation control : You can change the saturation of image. 1. Press the play back button and press the E button. 2. Select menu tab by pressing the Left / Right button. 1. Select by pressing the Up / Down button and a bar for selecting the saturation will display. 2. Change the saturation by pressing the Left / Right button. 3. Press the OK button and the image will be saved as a new file name. ● Brightness control : You can change the brightness of image. 1.
Special Effect (E button) : FUN FUN menus can be selected in the following conditions: S730 - 7M, 6M, 3M , 1M image size / S630 - 6M, 3M, 1M image size Cartoon ■ You can add a text box on the image to make the image as a cartoon. FUN Cartoon Select Cartoon ( Move E Cartoon ) Cartoon frame will display Frame Exit OK Select a desired frame by pressing the Left / Right button.
Special Effect (E button) : FUN ● Before saving the cartoon image, you can change the selected image 1. Pressing the +/- button deletes the image in order. 2. Press the OK button and you can select images. Preset focus frames ■ You can make the subject stand out from its surroundings. The subject will be sharp and in focus while making the rest out of focus. FUN HighLight Pressing the +/- button OK Search +/- Delete OK Search +/- Delete 3.
Special Effect (E button) : FUN ● Moving and changing the focus frame You can change the focus frame after selecting a Range menu. Composite image 1. Select a focus frame by pressing the Left / Right button and press the OK button. 2. Move the location of the frame by pressing the 5 function button. 3. Press the OK button and the file saves as a new file name. ■ You can combine 2 - 4 different shots in a still image.
Special Effect (E button) : FUN ※ Selecting 2 composite shooting ● Before selecting the last composite image, you can change a part of composite image. Pressing the 5 function button Move OK 1. Press the +/ - button and previous image will be deleted. 2. Press the OK button and you can select a new image.
Special Effect (E button) : FUN ■ Select a desired sub menu by pressing the Left / Right buttn and press the OK button to save the image as a new file name. Photo Frame ■ You can add 9 types of frame-like borders to a still image you want to capture. ● Date & Time information will not be printed on the stored image taken with Photo Frame menu. FUN Photo Frame Move 이동 E E Exit 해제 Frame OK Set ※ S630 only : The size of Photo frame image is fixed to 1M.
Special Effect (E button) : FUN Sticker ● You can add various stickers on the image.
Delete ( ) button ■ This deletes images stored on the memory. - Deleting multi-image ● Deleting Images in Play Mode T button : checks to delete the image Left / Right button : select deleted image 1. Select an image that you want to delete by pressing the LEFT / RIGHT button and press the DELETE ( ) button. After selecting images, press the OK button. 100-0054 2. A message will display as shown alongside on the LCD monitor.
Delete ( ) button Printer ( ● Deleting Images in Thumbnail Display Mode 1. Use the UP, DOWN, LEFT, and RIGHT buttons to select the image you want to delete, and then press the DELETE ( ) button. 2. A message will display on the LCD monitor as shown below. 3. Select the sub menu values by pressing the LEFT/ RIGHT button and then press the OK button. ) button ■ You can print images with this button after connecting the camera to a PictBridge printer. If [No] is selected : cancels "Delete Image".
Left / Right / Menu / OK button ■ LEFT / RIGHT / MENU / OK buttons activate the following. - LEFT button : While the menu is showing, press the LEFT button to select the menu tab to the left of the cursor. While the menu is not showing, press the LEFT button to select the previous image. - RIGHT button : While the menu is showing, press the RIGHT button to select the menu tab to the right of the cursor, or to move to a secondary menu.
Setting up the play back function using the LCD monitor ■ This menu is available while the camera is connected to a PictBridge supporting printer (direct connection to the camera, sold separately) with a USB cable. Menu tab Main menu Images Size Layout Type 《68》 Sub menu One Pic All Pics Auto PostCard Card 4X6 L 2L Letter A4 A3 Auto Full 1 2 4 8 9 16 Index Auto Plain Photo FastPhoto Secondary menu - Page Menu tab Main menu Quality p.
Starting the slide show ( ) ■ Images can be displayed continuously at pre-set intervals. You can view the slide show by connecting the camera to an external monitor. 1. Press the play mode button and press the menu button. 2. Press the LEFT / RIGHT button and select the [SLIDE SHOW] menu tab. ● Start the slide show : The slide show can start only in the [Show] menu. 1. Use the Up / Down buttons to select the [Show] SLIDE SHOW menu and press the Right button. Play Show Repeat Play Interval 2.
Starting the slide show ( ) ● Configure slide show effects : Unique screen effects can be used for the slide show. 1. Select the [Effect] sub menu by pressing the UP / DOWN button and press the RIGHT button. 2. Use the Up / Down button to select the type of effect. [Off] : Normal display. [Effect1] : Image is displayed slowly. [Effect2] : Image is displayed slowly from the centre outwards. [Effect3] : Image moves from the top left. [Mix] : The image slides irregularly.
Playback ( ) INFORMATION Deleting images 1. Press the Up / Down button and select the [Delete] menu tab. And then press the Right button. 2. Select a desired sub menu by pressing the UP / DOWN button and press the OK button. [Select] : Selection window for an image to delete is displayed. - Up/ Down/ Left/ Right : Select an image - Zoom T Button : Select the image for deletion. ( mark) - OK Button : Press the OK button to display the confirmation message.
Playback ( ) ■ Standard : This function allows you to embed printing quantity information on a stored image. 1. Press the Up / Down button and select the [DPOF] menu tab. And then press the Right button. 2. Press the Right button again and [Standard] sub menu will display. 3. Select a desired sub menu by pressing the Up / Down button and press the OK button. [Select] : Selection window for an image to print is displayed. - Up / Down / Left / Right : Select an image to print.
Playback ( ) ■ Print size : You can specify the print size when printing images stored on the memory card. The [Size] menu is available only for DPOF 1.1 compatible printers. 1. Press the Up / Down button and select the [DPOF] menu tab. And then press the Right button. 2. Press the Right button agian and select the [Size] sub menu will dispaly. 3. Select a desired sub menu by pressing the UP / DOWN button and press the OK button.
Playback ( ) INFORMATION ● When this menu is selected without inserting a memory card, the [No Card] message will display. ● If there is not enough space available in the memory card to copy saved images in the internal memory (16MB), the [Copy To Card] command will copy only some of the images and display [Memory Full!] message. Then the system will return to the playback mode. Please be sure to delete any unnecessary files to free up space before inserting the memory card into the camera.
PictBridge ■ You can use the USB cable to connect this camera to a printer that supports PictBridge (sold separately) and print the stored images directly. Movie clips and voice files cannot be printed. ● Setting up the camera for connection to the printer 1. Connect the camera and printer with USB cable. 2. Select the [Printer] menu by pressing Up / Down button and press the OK button.
PictBridge : Picture Selection ■ You can select images you want to print PictBridge : Print Setting ■ You can select the Paper Size, Print Format, Paper Type, Print Quality, Date Print, and File Name Print menus for printed pictures. ● Setting the Number of Copies to Print 1. Press the Menu button and the PictBridge menu PICTBRIDGE will display. One Image All 2. Use the Up / Down buttons to select the [Images] Size Layout menu and press the Right button. Type Quality 3.
PictBridge : Reset Important notes ■ Initialises user-changed configurations. 1. Use the Up / Down buttons to select the [Reset] menu tab. And then press the Right button. 2. Use the Up / Down buttons to select the desired sub menu value, and then press the OK button. If [Yes] is selected : All print and image settings will be reset. If [No] is selected : Settings will not be reset.
Important notes ■ Extremes in temperature may cause problems. - If the camera is transferred from a cold to a warm and humid environment, condensation can form on the delicate electronic circuitry. If this occurs, turn the camera off and wait for at least 1 hour until all moisture is dispersed. Moisture built up can also occur on the memory card. If this happens, turn off the camera and remove the memory card. Wait until the moisture has dispersed.
Warning indicator ■ There are several warnings that may appear on the LCD display. Memory Error! ㆍMemory card error → Turn off the camera power and turn it on again → Insert the memory card again → Insert and format the memory card (p.36) Low Battery! ㆍThere is low battery capacity → Insert fresh batteries. Low Light! ㆍWhen taking pictures in dark places → Take pictures in Flash Photography mode.
Before contacting a service centre Battery power quickly drains ㆍThe Camera is being used in low temperatures → Keep the camera in warm conditions (i.e. inside a coat or jacket) and only remove it in order to take images Camera does not take images when pressing the Shutter button ㆍThere is insufficient memory capacity → Delete unnecessary image files ㆍThe memory card has not been formatted → Format the memory card (p.
Before contacting a service centre Colour of image is different to the original scene ㆍWhite balance or effect setting is incorrect → Select appropriate White balance and effect Images are too bright ㆍExposure is excessive → Reset exposure compensation No image on external monitor ㆍThe external monitor has not been connected properly with the camera → Check the connection cables ㆍThere are incorrect files in the memory card → Insert a memory card that has correct files When using the PC’s explorer, the [Rem
Specifications ■ Exposure - Control : Program AE Metering : Multi, Spot - Compensation : ±2EV (1/3EV steps) - ISO Equivalent : S730-Auto, 80, 100, 200, 400, 800, 1000 S630-Auto, 80, 100, 200, 400 ■ Flash - Modes : Auto, Auto & Red-eye reduction, Fill-in flash, Slow sync, Flash off - Range : Wide : 0.2m ~ 3.0m, Tele : 0.4m ~ 2.5m (ISO AUTO) - Recharging Time : Approx. 5 sec.
Specifications ■ Interface - Digital output connector : USB 2.0 High Speed - Audio : Mono - Video output : NTSC, PAL (user selectable) - Capacity (256 MB MMC) ·S730 Super Fine 67 80 95 95 150 558 Fine 128 157 183 183 284 710 Normal 197 223 269 269 400 822 ·S630 ■ Power Source - Primary Battery : 2 x AA Alkaline - Rechargeable battery (0ptional) : SNB-2512B KIT (2xAA 2500mAh Ni-MH Battery & Charger) ※ Included battery may vary depending on sales region. ■ Dimensions (WxHxD): 99.8x 62.
Software Notes About the software Please ensure that you read the instruction manual carefully before use. •The attached software is a camera driver and image editing software tool for Windows. •Under no circumstances should all or part of either the software or the user manual be reproduced. •Copyrights for software are licensed only for use with a camera. •In the unlikely event of a manufacturing fault, we will repair or exchange your camera.
Setting up the application software ■ To use this camera with a PC, install the application software first. After this has been done, the stored images in the camera can be moved to the PC and can be edited by an image editing program. 2. Install the camera driver, DirectX and Digimax Master by selecting a button shown on the monitor. If an upper version of DirectX was installed on your computer, DirectX may not be installed. ■ You can visit the Samsung web-site through the internet. http://www.
Setting up the application software 3. After restarting the computer, connect the PC to the camera with the USB cable. 4. Turn the camera power on. The [Found New Hardware Wizard] will open and the computer will recognise the camera. ※ If your OS is Windows XP, an image viewer program will open. If the download window of Digmax Master opens after starting Digimax Master, the camera driver was set up successfully.
Starting PC mode •If you connect the USB cable to a USB port on your PC and then turn on the power, the camera will automatically switch to "computer connection mode". ■ Connecting the camera to a PC •In this mode, you can download stored images to your PC through the USB cable. •The LCD monitor is always turned off in PC mode. ■ Camera settings for connection 1. Turn on the camera 2. Connect the camera and computer with the supplied USB cable. 3. Turn on the computer.
Starting PC mode ■ Downloading stored images You can download the still images stored on the camera to your PC's hard disk and print them or use a photo editing software to edit them. 6. Press the right mouse button and a pop-up menu will open. Click [Paste]. 1. Connect the camera to your PC with the USB cable. 2. On your computer's desktop display, select [My computer] and double click [Removable Disk → DCIM → 100SSCAM]. The image files will then be displayed. 7.
Removing the removable disk ■ Windows 98/98SE 1. Check whether the camera and PC are transferring a file. If the camera status lamp blinks, please wait until the lamp has finished blinking and is constantly on. 2. Unplug the USB cable. ■ Windows 2000/ME/XP (The illustrations may differ from those shown depending on the Windows O/S.) 1. Check whether the camera and PC are transferring a file. If the camera status lamp blinks, please wait until the lamp has finished blinking and is constantly on. 5.
Setting up the USB Driver for MAC 1. A USB Driver for MAC is not included with the software CD as MAC OS supports the camera driver. 2. Check the MAC OS version during start-up. This camera is compatible with MAC OS 9.2 ~ 10.3. 3. Connect the camera to the Macintosh and turn the camera power on. 4. A new icon will be displayed on the desktop after connecting the camera to the MAC. Removing the USB Driver for Windows 98SE ■ To remove the USB driver, refer to the process shown below. 1.
Digimax Master ■ You can download, view, edit and save your images and movies with this software. This software is only compatible with Windows except for the Windows 98. ■ To start the program, click [Start → Programs → Samsung → Digimax Master → Digimax Master]. ● Downloading images 1. Connect the camera to your PC. 2. A window for downloading images will display after connecting the camera to your PC. - To download the captured images, select the [Select All] button.
Digimax Master ● Image viewer : You can view the stored images. ① ● Image edit : You can edit the still image. ⑤ ⑥ ① ④ ⑦ ② ③ ④ ② ③ - Image viewer functions are listed below. ① Menu bar : You can select menus. File, Edit, View, Tools, Change functions, Auto download, help, etc. ② Image selection window : You can select the desired images in this window. ③ Media type selection menu : You can select image viewer, image edit and movie edit functions in this menu.
FAQ Digimax Master FAQ ● Movie edit : You can get the still image, movie clip, narration, music files together in a movie clip. ■ Please check the following if the USB connection malfunctions. Case 1 USB cable is not connected or it is not the supplied USB cable. → Connect the supplied USB cable. Case 2 The camera is not recognised by your PC. Sometimes, the camera may appear under [Unknown Devices] in Device Manager. → Install the camera driver correctly.
FAQ Case 6 Case 7 Case 8 《94》 When I open the Device Manager (by clicking Start → (Settings) → Control Panel → (Performance and Maintenance) → System → (Hardware) → Device Manager), there are Unknown Devices or Other Devices entries with a yellow question mark(?) beside them or devices with an exclamation mark(!) beside them. → Right-click on the entry with the question (?) or exclamation (!) mark and select "Remove". Restart the PC and connect the camera again.
Correct Disposal of This Product Correct Disposal of This Product (Waste Electrical & Electronic Equipment) (Applicable in the European Union and other European countries with separate collection systems) This marking shown on the product or its literature, indicates that it should not be disposed with other household wastes at the end of its working life.
MEMO 《96》 MEMO
SAMSUNG TECHWIN CO., LTD. SAMSUNG FRANCE S.A.S. SAMSUNG OPTO-ELECTRONICS UK LIMITED OPTICS & DIGITAL IMAGING DIVISION 145-3, SANGDAEWON 1-DONG, JUNGWONGU, SUNGNAM-CITY, KYUNGKI-DO, KOREA 462-121 TEL : (82) 31-740-8086, 8088, 8090, 8092, 8099 FAX : (82) 31-740-8398 www.samsungcamera.com BP 51 TOUR MAINE MONTPARNASSE 33, AV .DU MAINE 75755, PARIS CEDEX 15, FRANCE HOTLINE PHOTO NUMÉRIQUE : 00 800 22 26 37 27(Numéro Vert-Appel Gratuit) TEL : (33) 1-4279-2200 FAX : (33) 1-4320-4510 www.samsungphoto.
