User manual S19C150N S19C150F S20C150FL S22C150N The color and the appearance may differ depending on the product, and the specifications are subject to change without prior notice to improve the performance.
Table Of Contents BEFORE USING THE PRODUCT PREPARATIONS CONNECTING AND USING A SOURCE DEVICE 7 Copyright 7 Icons used in this manual 8 Cleaning 8 9 9 Cleaning Securing the Installation Space Precautions for storage 10 Safety Precautions 10 11 12 14 Symbols for safety precautions Electricity and Safety Installation and Safety Operation 18 Correct posture to use the product 19 Checking the Contents 19 20 Removing the Packaging Checking the Components 21 Parts 21 23 Frontal Button Reve
Table Of Contents SCREEN SETUP CONFIGURING TINT 33 Connecting and Using a PC 33 34 35 36 Connection Using the D-SUB Cable (Analogue Type) Driver Installation Setting Optimum Resolution Changing the Resolution Using a PC 40 Brightness 40 Configuring Brightness 41 Contrast 41 Configuring Contrast 42 Sharpness 42 Configuring Sharpness 43 SAMSUNG MAGIC Bright 43 Configuring SAMSUNG MAGIC Bright 44 SAMSUNG MAGIC Upscale 44 Configuring SAMSUNG MAGIC Upscale 45 Image Size 45 Changing
Table Of Contents COORDINATING OSD SETUP AND RESET 51 Blue 51 Configuring Blue 52 Color Tone 52 Configuring the Color Tone Settings 53 Gamma 53 Configuring Gamma 54 Language 54 Configuring Language 55 Menu H-Position & Menu V-Position 55 Configuring Menu H-Position & Menu VPosition 56 Display Time 56 Configuring Display Time 57 Transparency 57 Changing Transparency 58 Reset 58 Initializing Settings (Reset) 59 Eco Saving 59 Configuring Eco Saving 60 Off Timer 60 Conf
Table Of Contents INFORMATION MENU AND OTHERS INSTALLING THE SOFTWARE TROUBLESHOOTING GUIDE SPECIFICATIONS APPENDIX 64 INFORMATION 64 Displaying INFORMATION 65 Configuring Brightness and Contrast in the Initial Screen 66 MagicTune 66 66 67 What is "MagicTune"? Installing the Software Removing the Software 68 MultiScreen 68 69 Installing the Software Removing the Software 70 Requirements Before Contacting Samsung Customer Service Center 70 70 70 Testing the Product Checking the Resolut
Table Of Contents 90 Correct Disposal 90 Correct Disposal of This Product (Waste Electrical & Electronic Equipment) 91 Terminology INDEX Table Of Contents 6
Before Using the Product Copyright The contents of this manual are subject to change without notice to improve quality. 2013 Samsung Electronics Samsung Electronics owns the copyright for this manual. Use or reproduction of this manual in parts or entirety without the authorization of Samsung Electronics is prohibited. Microsoft and Windows are registered trademarks of Microsoft Corporation. VESA, DPM and DDC are registered trademarks of the Video Electronics Standards Association.
Before Using the Product Cleaning Cleaning Exercise care when cleaning as the panel and exterior of advanced LCDs are easily scratched. Take the following steps when cleaning. 1. Power off the monitor and computer. 2. Disconnect the power cord from the monitor. Hold the power cable by the plug and do not touch the cable with wet hands. Otherwise, an electric shock may result. 3. Wipe the monitor with a clean, soft and dry cloth.
Before Using the Product Securing the Installation Space Ensure some space around the product for ventilation. An internal temperature rise may cause fire and damage the product. Be sure to allow the amount of space as shown below or greater when installing the product. The exterior may differ depending on the product. 3.93 inches (10 cm) 3.93 inches(10 cm) 3.93 inches (10 cm) 3.93 inches (10 cm) 3.
Before Using the Product Safety Precautions Caution RISK OF ELECTRIC SHOCK DO NOT OPEN Caution: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). THERE ARE NO USER SERVICEABLE PARTS INSIDE. REFER ALL SERVICING TO QUALIFIED PERSONNEL. This symbol indicates that high voltage is present inside. It is dangerous to make any kind of contact with any internal part of this product.
Before Using the Product Electricity and Safety The following images are for reference only. Real-life situations may differ from what is shown in the images. Warning Do not use a damaged power cord or plug, or a loose power socket. An electric shock or fire may result. Do not plug many products into the same power socket. Otherwise, the socket may overheat and cause a fire. Do not touch the power plug with wet hands. Otherwise, an electric shock may result.
Before Using the Product Caution Do not unplug the power cord when the product is in use. The product may become damaged by an electric shock. Do not use the power cord for products other than authorized products supplied by Samsung. ! An electric shock or fire may result. Keep the power socket where the power cord is connected unobstructed. If any problem occurs in the product, unplug the power cable to completely cut the power to the product.
Before Using the Product Do not install the product on an unstable or vibrating surface (insecure shelf, sloped surface, etc.). The product may fall and break or cause a personal injury. Using the product in an area with excess vibration may damage the product or cause a fire. Do not install the product in a vehicle or a place exposed to dust, moisture (water drips, etc.), oil, or smoke. ! An electric shock or fire may result.
Before Using the Product Put down the product carefully. The product may fall and break or cause a personal injury. ! SAMSUNG ! Installing the product in an unusual place (a place exposed to a lot of fine particles, chemical substances or extreme temperatures, or an airport or train station where the product should operate continuously for an extended period of time) may seriously affect its performance.
Before Using the Product During a lightning or thunderstorm, power off the product and remove the power cable. ! An electric shock or fire may result. Do not drop objects on the product or apply impact. An electric shock or fire may result. ! Do not move the product by pulling the power cord or any cable. Otherwise, the power cable may be damaged and product failure, an electric shock or fire may result. If a gas leakage is found, do not touch the product or power plug.
Before Using the Product Caution Leaving the screen fixed on a stationary image for an extended period of time may cause afterimage burn-in or defective pixels. ! If you are not going to use the product for an extended period of time, activate power-saving mode or a moving-picture screen saver. -_! Disconnect the power cord from the power socket if you do not plan on using the product for an extended period of time (vacation, etc).
Before Using the Product Do not hold the monitor upside-down or move it by holding the stand. The product may fall and break or cause a personal injury. Do not use humidifiers or stoves around the product. An electric shock or fire may result. Rest your eyes for more than 5 minutes for every 1 hour of product use. Eye fatigue will be relieved. ! Do not touch the screen when the product has been turned on for an extended period of time as it will become hot.
Before Using the Product Correct posture to use the product Use the product in the correct posture as follows: 50 cm Straighten your back. Allow a distance of 45 to 50 cm between your eye and the screen, and look slightly downward at the screen. Keep your eyes directly in front of the screen. Adjust the angle so light does not reflect on the screen. Keep your forearms perpendicular to your upper arms and level with the back of your hands. Keep your elbows at about a right angle.
1 1.1 Preparations Checking the Contents 1.1.1 Removing the Packaging 1 Open the packaging box. Be careful not to damage the product when you open the packaging with a sharp instrument. 2 Remove the styrofoam from the product. 3 Check the components and remove the styrofoam and plastic bag. This image is for reference only. 4 Store the box in a dry area so that it can be used when moving the product in the future.
1 Preparations 1.1.2 Checking the Components Contact the dealer from whom you purchased the product if any item is missing. The appearance of the components and items sold separately may differ from the image shown. Components Quick setup guide Warranty card User manual (Not available in some locations) Power cable DC power adapter Stand base Stand neck D-SUB cable (optional) Components may vary depending on the country.
1 1.2 Preparations Parts 1.2.1 Frontal Button The color and shape of parts may differ from what is shown. Specifications are subject to change without notice to improve quality. Function Key Guide SAMSUNG MAGIC BRIGHT SAMSUNG MAGIC BRIGHT MENU AUTO AUTO Icons AUTO Description Open or close the onscreen display (OSD) menu, or return to the parent menu. MENU OSD control lock: Maintain the current settings, or lock the OSD control to prevent unintended changes to settings.
1 Preparations Icons Description Move to the upper or lower menu or adjust the value for an option on the OSD menu. Use this button to control the brightness and contrast of the screen. Confirm a menu selection. Press the [AUTO] button to automatically adjust the screen settings. AUTO Changing the resolution in Display Properties will activate the Auto Adjustment function. Turn the screen on or off.
1 Preparations 1.2.2 Reverse Side The color and shape of parts may differ from what is shown. Specifications are subject to change without notice to improve quality. Provided ports may vary depending on the product. S19C150F / S20C150FL DC 14V S19C150N / S22C150N RGB IN DC 14V DC 14V RGB IN DC 14V Port RGB IN RGB IN Description DC 14V Connects to the DC power adapter. RGB IN Connect to a PC using the D-SUB cable.
1 1.3 Preparations Installation 1.3.1 Attaching the Stand (S19C150F / S20C150FL) Before assembling the product, place the product down on a flat and stable surface so that the screen is facing downwards. Insert the stand neck into the stand base in the direction shown in the figure. Check that the stand neck is firmly connected. Tightly fasten the connecting screw at the bottom of the stand base.
1.3.2 Attaching the Stand (S19C150N / S22C150N) Before assembling the product, place the product down on a flat and stable surface so that the screen is facing downwards. Insert the stand neck into the stand base in the direction shown in the figure. Check that the stand neck is firmly connected. Tightly fasten the connecting screw at the bottom of the stand base.
1 Preparations 1.3.3 Removing the Stand (S19C150F / S20C150FL) Place a soft cloth over the table to protect the product and place the product onto the cloth so that the front of the product faces downwards. While holding the stand neck with one hand, pound the other fisted hand down onto the top of the stand base in the direction of the arrow to detach the stand base. Turn the connecting screw at the bottom of the stand base to separate it.
1 Preparations 1.3.4 Removing the Stand (S19C150N / S22C150N) Place a soft cloth over the table to protect the product and place the product onto the cloth so that the front of the product faces downwards. While holding the stand neck with one hand, pound the other fisted hand down onto the top of the stand base in the direction of the arrow to detach the stand base. Turn the connecting screw at the bottom of the stand base to separate it.
1 Preparations 1.3.5 Installing a Wall-mount Kit or Desktop Stand (S19C150F / S20C150FL) 1 2 A 3 4 B A Attach the wall-mount kit or desktop stand here B Bracket (sold separately) Align the grooves and tightly fasten the screws on the bracket on the product with the corresponding parts on the wall-mount kit or desktop stand you want to attach. Notes Using a screw longer than the standard length can damage the internal components of the product.
1 Preparations 1.3.6 Adjusting the Product Tilt The color and shape of parts may differ from what is shown. Specifications are subject to change without notice to improve quality. S19C150F / S20C150FL S19C150N / S22C150N 0° (± 2°) ~ 0° (± 20° (± 2°) You can adjust the tilt of your monitor. Hold the lower part of the product and adjust the tilt carefully.
1 Preparations 1.3.7 Anti-theft Lock An anti-theft lock allows you to use the product securely even in public places. The locking device shape and locking method depend on the manufacturer. Refer to the user guide provided with your anti-theft locking device for details. The lock device is sold separately. S19C150F / S20C150FL S19C150N / S22C150N DC 14V RGB IN The color and shape of parts may differ from what is shown. Specifications are subject to change without notice to improve quality.
2 2.1 Connecting and Using a Source Device Before Connecting S19C150F / S20C150FL S19C150N / S22C150N DC 14V RGB IN 2.1.1 Pre-connection Checkpoints Before connecting a source device, read the user manual provided with it. The number and locations of ports on source devices may differ from device to device. Do not connect the power cable until all connections are completed. Connecting the power cable during connection may damage the product.
2 2.2 Connecting and Using a Source Device Connecting the Power Connect the power adapter to [DC 14V] jack on the rear of the product. Connect the power cable to the DC power adapter. Next, connect the DC power adapter to the product. Plug in the power cable to the power socket. S19C150F / S20C150FL DC 14V S19C150N / S22C150N DC 14V The input voltage is switched automatically.
2 2.3 Connecting and Using a Source Device Connecting and Using a PC Select a connection method suitable for your PC. Connecting parts may differ in different products. 2.3.1 Connection Using the D-SUB Cable (Analogue Type) Do not connect the power cable before connecting all other cables. Ensure you connect a source device first before connecting the power cable. S19C150F / S20C150FL RGB IN 1 2 Connect the D-SUB cable to the [RGB IN] port on the back of the product and the RGB port on the PC.
2 Connecting and Using a Source Device 2.3.2 Driver Installation You can set the optimum resolution and frequency for this product by installing the corresponding drivers. An installation driver is contained on the CD supplied with the product. If the file provided is faulty, visit the Samsung homepage (http://www.samsung.com/) and download the file. 1 2 3 4 Insert the user manual CD provided with the product into the CD-ROM drive.
2 Connecting and Using a Source Device 2.3.3 Setting Optimum Resolution An information message about setting optimum resolution will appear if you power on the product for the first time after purchase. Select a language on the product and change the resolution on your PC to the optimum setting. The optimal resolution for this monitor is as follows: **** x **** **Hz Use the above settings to set the resolution on your PC.
2 Connecting and Using a Source Device 2.3.4 Changing the Resolution Using a PC Adjust the resolution and refresh rate in Control Panel on your PC to obtain optimum picture quality. The picture quality of TFT-LCDs may degrade if the optimum resolution is not selected. Changing the Resolution on Windows XP Go to Control Panel 1 Display Settings and change the resolution.
2 Connecting and Using a Source Device Changing the Resolution on Windows Vista Go to Control Panel Personalization Display Settings and change the resolution.
2 Connecting and Using a Source Device Changing the Resolution on Windows 7 Go to Control Panel Display Screen Resolution and change the resolution.
2 Connecting and Using a Source Device Changing the Resolution on Windows 8 Go to Settings Control Panel Display Screen Resolution and change the resolution.
3 3.1 Screen Setup Configure the screen settings such as brightness. Brightness You can adjust the general brightness of the picture. (Range: 0~100) A higher value will make the picture appear brighter. SAMSUNG This menu is not available when MAGIC Bright is set to Dynamic Contrast mode. This menu is not available when Eco Saving is enabled. 3.1.1 Configuring Brightness 1 Press any button on the front of the product to display the Function Key Guide.
3 3.2 Screen Setup Contrast Adjust the contrast between the objects and background. (Range: 0~100) A higher value will increase the contrast to make the object appear clearer. SAMSUNG This option is not available when MAGIC Bright is in Cinema or Dynamic Contrast mode. 3.2.1 Configuring Contrast 1 Press any button on the front of the product to display the Function Key Guide. Next, press [ MENU ] to display the corresponding menu screen.
3 3.3 Screen Setup Sharpness Make the outline of objects more clear or blurry. (Range: 0~100) A higher value will make the outline of objects clearer. SAMSUNG This option is not available when MAGIC Bright is in Cinema or Dynamic Contrast mode. SAMSUNG This menu is not available when MAGIC Upscale is in Mode1 or Mode2. 3.3.1 Configuring Sharpness 1 Press any button on the front of the product to display the Function Key Guide. Next, press [ MENU ] to display the corresponding menu screen.
3 3.4 Screen Setup SAMSUNG MAGIC Bright This menu provides an optimum picture quality suitable for the environment where the product will be used. This menu is not available when Eco Saving is enabled. You can customize the brightness to suit your preferences. 3.4.1 Configuring SAMSUNG MAGIC Bright 1 Press any button on the front of the product to display the Function Key Guide. Next, press [ MENU ] to display the corresponding menu screen.
3 3.5 Screen Setup SAMSUNG MAGIC Upscale SAMSUNG MAGICUpscale function can enhance the layers of the picture details and the vividness of the picture. The function has more obvious effects on low-resolution pictures. SAMSUNG This menu is not available when MAGIC Bright is in Cinema or Dynamic Contrast mode. 3.5.1 Configuring SAMSUNG MAGIC Upscale 1 Press any button on the front of the product to display the Function Key Guide. Next, press [ MENU ] to display the corresponding menu screen.
3 3.6 Screen Setup Image Size Change the picture size. 3.6.1 Changing the Image Size 1 Press any button on the front of the product to display the Function Key Guide. Next, press [ MENU ] to display the corresponding menu screen. 2 3 Press [ ] to move to PICTURE and press [ ] on the product. Press [ ] to move to Image Size and press [ ] on the product. The following screen will appear.
3 3.7 Screen Setup H-Position & V-Position H-Position: Move the screen to the left or right. V-Position: Move the screen up or down. 3.7.1 Configuring H-Position & V-Position 1 Press any button on the front of the product to display the Function Key Guide. Next, press [ MENU ] to display the corresponding menu screen. 2 3 Press [ ] to move to PICTURE and press [ ] on the product. Press [ ] to move to H-Position or V-Position, and press [ ]. The following screen will appear.
3 3.8 Screen Setup Coarse Adjust the screen frequency. 3.8.1 Adjusting Coarse 1 Press any button on the front of the product to display the Function Key Guide. Next, press [ MENU ] to display the corresponding menu screen. 2 3 Press [ ] to move to PICTURE and press [ Press [ ] to move to Coarse and press [ ] on the product. ] on the product. The following screen will appear.
3 3.9 Screen Setup Fine Fine-adjust the screen to obtain a vivid picture. 3.9.1 Adjusting Fine 1 Press any button on the front of the product to display the Function Key Guide. Next, press [ MENU ] to display the corresponding menu screen. 2 3 Press [ ] to move to PICTURE and press [ Press [ ] to move to Fine and press [ ] on the product. ] on the product. The following screen will appear.
4 Configuring Tint SAMSUNG Adjust the tint of the screen. This menu is not available when MAGIC Bright is set to Cinema or Dynamic Contrast mode. Red Adjust the value of the color red in the picture. (Range: 0~100) A higher value will increase the intensity of the color. 4.1.1 Configuring Red 1 Press any button on the front of the product to display the Function Key Guide. Next, press [ MENU ] to display the corresponding menu screen.
4 Green Adjust the value of the color green in the picture. (Range: 0~100) A higher value will increase the intensity of the color. 4.2.1 Configuring Green 1 Press any button on the front of the product to display the Function Key Guide. Next, press [ MENU ] to display the corresponding menu screen. 2 3 Press [ ] to move to COLOR and press [ Press [ ] to move to Green and press [ ] on the product. ] on the product. The following screen will appear.
4 Blue Adjust the value of the color blue in the picture. (Range: 0~100) A higher value will increase the intensity of the color. 4.3.1 Configuring Blue 1 Press any button on the front of the product to display the Function Key Guide. Next, press [ MENU ] to display the corresponding menu screen. 2 3 Press [ ] to move to COLOR and press [ Press [ ] to move to Blue and press [ ] on the product. ] on the product. The following screen will appear.
4 Color Tone Adjust the general color tone of the picture. 4.4.1 Configuring the Color Tone Settings 1 Press any button on the front of the product to display the Function Key Guide. Next, press [ MENU ] to display the corresponding menu screen. 2 3 Press [ ] to move to COLOR and press [ ] on the product. Press [ ] to move to Color Tone and press [ ] on the product. The following screen will appear. COLOR Red 50 Green 50 Blue Color Tone Gamma 4.
4 Gamma Adjust the mid-range brightness (Gamma) of the picture. 4.5.1 Configuring Gamma 1 Press any button on the front of the product to display the Function Key Guide. Next, press [ MENU ] to display the corresponding menu screen. 2 3 Press [ ] to move to COLOR and press [ ] on the product. Press [ ] to move to Gamma and press [ ] on the product. The following screen will appear. COLOR Red 50 Green 50 Blue Color Tone Normal Gamma 4.
5 5.1 Coordinating OSD Language Set the menu language. A change to the language setting will only be applied to the onscreen menu display. It will not be applied to other functions on your PC. 5.1.1 Configuring Language 1 Press any button on the front of the product to display the Function Key Guide. Next, press [ MENU ] to display the corresponding menu screen. 2 3 Press [ ] to move to MENU SETTINGS and press [ Press [ ] to move to Language and press [ ] on the product. ] on the product.
5 5.2 Coordinating OSD Menu H-Position & Menu V-Position Menu H-Position: Move the menu position to the left or right. Menu V-Position: Move the menu position up or down. 5.2.1 Configuring Menu H-Position & Menu V-Position 1 Press any button on the front of the product to display the Function Key Guide. Next, press [ MENU ] to display the corresponding menu screen. 2 3 Press [ ] to move to MENU SETTINGS and press [ ] on the product.
5 5.3 Coordinating OSD Display Time Set the on-screen display (OSD) menu to automatically disappear if the menu is not used for a specified period of time. Display Time can be used to specify the time after which you want the OSD menu to disappear. 5.3.1 Configuring Display Time 1 Press any button on the front of the product to display the Function Key Guide. Next, press [ MENU ] to display the corresponding menu screen.
5 5.4 Coordinating OSD Transparency Set the transparency for the menu windows: 5.4.1 Changing Transparency 1 Press any button on the front of the product to display the Function Key Guide. Next, press [ MENU ] to display the corresponding menu screen. 2 3 Press [ ] to move to MENU SETTINGS and press [ Press [ ] to move to Transparency and press [ ] on the product. ] on the product. The following screen will appear.
6 6.1 Setup and Reset Reset Return all the settings for the product to the default factory settings. 6.1.1 Initializing Settings (Reset) 1 Press any button on the front of the product to display the Function Key Guide. Next, press [ MENU ] to display the corresponding menu screen. 2 3 Press [ ] to move to SETUP&RESET and press [ Press [ ] to move to Reset and press [ ] on the product. ] on the product. The following screen will appear.
6 6.2 Setup and Reset Eco Saving The Eco Saving function reduces power consumption by controlling the electric current used by the monitor panel. SAMSUNG This menu is not available when MAGIC Bright is in Dynamic Contrast mode. 6.2.1 Configuring Eco Saving 1 Press any button on the front of the product to display the Function Key Guide. Next, press [ MENU ] to display the corresponding menu screen.
6 6.3 Setup and Reset Off Timer You can set the product to automatically turn off. 6.3.1 Configuring Off Timer 1 Press any button on the front of the product to display the Function Key Guide. Next, press [ MENU ] to display the corresponding menu screen. 2 3 Press [ ] to move to SETUP&RESET and press [ Press [ ] to move to Off Timer and press [ ] on the product. ] on the product. The following screen will appear. 6(783 5(6(7 5HVHW (FR 6DYLQJ 2II 2II 7LPHU 2II 2Q 7XUQ 2II $IWHU .
6 6.4 Setup and Reset Turn Off After The off timer can be set within a range of 1 to 23 hours. The product will automatically power off after the specified number of hours. This option is only available when Off Timer is set to On. 6.4.1 Configuring Turn Off After 1 Press any button on the front of the product to display the Function Key Guide. Next, press [ MENU ] to display the corresponding menu screen.
6 6.5 Setup and Reset Key Repeat Time Control the response rate of a button when the button is pressed. 6.5.1 Configuring Key Repeat Time 1 Press any button on the front of the product to display the Function Key Guide. Next, press [ MENU ] to display the corresponding menu screen. 2 3 Press [ ] to move to SETUP&RESET and press [ Press [ ] to move to Key Repeat Time and press [ ] on the product. ] on the product. The following screen will appear.
6 6.6 Setup and Reset Customized Key You can customize Customized Key as follows. 6.6.1 Configuring Customized Key 1 Press any button on the front of the product to display the Function Key Guide. Next, press [ MENU ] to display the corresponding menu screen. 2 3 Press [ ] to move to SETUP&RESET and press [ Press [ ] to move to Customized Key and press [ ] on the product. ] on the product. The following screen will appear.
7 7.1 INFORMATION Menu and Others INFORMATION View the current input source, frequency and resolution. 7.1.1 Displaying INFORMATION 1 Press any button on the front of the product to display the Function Key Guide. Next, press [ MENU ] to display the corresponding menu screen. 2 Press [ ] to move to INFORMATION. The current input source, frequency and resolution will appear.
7 7.2 INFORMATION Menu and Others Configuring Brightness and Contrast in the Initial Screen Adjust the Brightness, Contrast using the [ ] buttons when the initial screen (that displays no menu screen) is displayed. 1 Press any button on the front of the product (when no menu screen is displayed) to display the Function Key Guide. Next, press [ ]. The following screen will appear. %ULJKWQHVV 100 &RQWUDVW 75 EXIT 2 3 Press the [ ] button to alternate between the Brightness and Contrast settings.
8 8.1 Installing the Software MagicTune 8.1.1 What is "MagicTune"? "MagicTune" is a software program that helps with monitor adjustments by providing comprehensive descriptions of monitor functions and easy-to-understand guidelines. You can adjust the product with the mouse and the keyboard without using the operating buttons of the product. 8.1.2 Installing the Software 1 2 Insert the installation CD into the CD-ROM drive. Select the "MagicTune" setup program.
8 Installing the Software 8.1.3 Removing the Software You can only remove "MagicTune™" through Add or Remove Programs in Windows. To remove "MagicTune™", complete the following steps. 1 Click Start select Settings, and select Control Panel from the menu. For Windows XP, click Start, and select Control Panel from the menu. 2 3 4 5 6 Double-click the Add or Remove Programs icon in the Control Panel. In the Add/Remove window, find and select "MagicTune™" so that it is highlighted.
8 8.2 Installing the Software MultiScreen MultiScreen "MultiScreen" enables users to use the monitor by partitioning multiple sections. 8.2.1 Installing the Software 1 2 Insert the installation CD into the CD-ROM drive. Select the "MultiScreen" setup program. If the pop-up screen for the software installation does not appear on the main screen, find and double-click the "MultiScreen" setup file on the CD-ROM. 3 4 When the Installation Wizard appears, click Next.
8 Installing the Software Hardware At least 32MB of memory At least 60MB of free space on the hard disk drive 8.2.2 Removing the Software Click Start, select Settings/Control Panel, and then double-click Add or Remove Programs. Select "MultiScreen" from the program list and click the Add/Delete button.
9 9.1 Troubleshooting Guide Requirements Before Contacting Samsung Customer Service Center 9.1.1 Testing the Product Before calling Samsung Customer Service Center, test your product as follows. If the problem persists, contact Samsung Customer Service Center. Check if your product is operating normally by using the product test function. If the screen is turned off and the power indicator blinks even though the product is properly connected to a PC, perform a self-diagnosis test.
9 Troubleshooting Guide Screen issue The message Check Signal Cable appears. Check that the cable is properly connected to the product. (Refer to "2.3 Connecting and Using a PC") Check that the device connected to the product is powered on. Not Optimum Mode is displayed. This message appears when the signal from the graphics card exceeds the maximum resolution or frequency for the product.
9 Troubleshooting Guide Source device issue A beeping sound is heard when my PC is booting. If a beeping sound is heard when your PC is booting, have your PC serviced.
9 9.2 Troubleshooting Guide Q&A Question How can I change the frequency? Answer Set the frequency on your graphics card. Windows XP: Go to Control Panel Display Settings Appearance and Themes Advanced Monitor, and adjust Refresh rate under Monitor settings. Windows ME/2000: Go to Control Panel Advanced Display Settings Monitor, and adjust Refresh rate under Monitor settings.
9 Troubleshooting Guide Question How can I change the resolution? Answer Windows XP: Go to Control Panel Display Appearance and Themes Settings, and adjust the resolution. Windows ME/2000: Go to Control Panel Display Settings, and adjust the resolution. Windows Vista: Go to Control Panel Appearance and Personalization Personalize Display Settings, and adjust the resolution.
10 Specifications 10.1 General (S19C150N / S22C150N) Model Name Panel S19C150N S22C150N Size 18.5 Inches (47 cm) 21.5 Inches (54 cm) Display area 409.8 mm (H) x 230.4 mm (V) 476.64 mm (H) x 268.11 mm (V) 16.1 Inches (H) x 9.1 Inches (V) 18.8 Inches (H) x 10.6 Inches (V) 0.300 mm (H) x 0.300 mm (V) 0.24825 mm (H) x 0.24825 mm (V) 0.012 Inches (H) x 0.012 Inches (V) 0.01 Inches (H) x 0.
10 Specifications Model Name S19C150N S22C150N Plug-and-Play This monitor can be installed and used with any Plugand-Play compatible systems. Two-way data exchange between the monitor and PC system optimizes the monitor settings. Monitor installation takes place automatically. However, you can customize the installation settings if desired. Panel Dots (Pixels) Due to the nature of the manufacturing of this product, approximately 1 pixel per million (1ppm) may be brighter or darker on the LCD panel.
10 Specifications 10.2 General (S19C150F / S20C150FL) Model Name Panel S19C150F S20C150FL Size 18.5 Inches (47 cm) 19.5 Inches (49 cm) Display area 409.8 mm (H) x 230.4 mm (V) 432 mm (H) x 239.76 mm (V) 16.1 Inches (H) x 9.1 Inches (V) 17 Inches (H) x 9.4 Inches (V) 0.300 mm (H) x 0.300 mm (V) 0.27 mm (H) x 0.27 mm (V) Pixel Pitch 0.012 Inches (H) x 0.012 Inches (V) Synchronization Horizontal Frequency 30 ~ 81 kHz Vertical Frequency 56 ~ 75 Hz Display Color Resolution 0.
10 Specifications Model Name Environmental considerations Operating S19C150F S20C150FL Temperature : 50°F ~ 104°F (10°C ~ 40°C) Humidity : 10 % – 80 %, non-condensing Storage Temperature : -4°F ~ 113°F (-20°C ~ 45°C) Humidity : 5 % – 95 %, non-condensing Plug-and-Play This monitor can be installed and used with any Plugand-Play compatible systems. Two-way data exchange between the monitor and PC system optimizes the monitor settings. Monitor installation takes place automatically.
10 Specifications 10.3 PowerSaver The power-saving function of this product reduces power consumption by switching off the screen and controlling the power LED status if the product is not used for a specified period of time. The power is not turned off in power-saving mode. To switch the screen back on, press any key on the keyboard or move the mouse. Power-saving mode functions only when the product is connected to a PC that has a power-saving function.
10 Specifications 10.4 Standard Signal Mode Table This product can be set to only one resolution for each screen size to obtain the optimum picture quality due to the nature of the panel. Therefore, a resolution other than the specified resolution may degrade the picture quality. To avoid this, it is recommended that you select the optimum resolution specified for the screen size of your product. Check the frequency when you exchange a CDT monitor (connected to a PC) for an LCD monitor.
10 Specifications S20C150FL Resolution Horizontal Frequency (kHz) Vertical Frequency (Hz) Pixel Clock (MHz) Sync Polarity (H/V) IBM, 720 x 400 31.469 70.087 28.322 -/+ VESA, 640 x 480 31.469 59.940 25.175 -/- MAC, 640 x 480 35.000 66.667 30.240 -/- VESA, 640 x 480 37.861 72.809 31.500 -/- VESA, 640 x 480 37.500 75.000 31.500 -/- VESA, 800 x 600 35.156 56.250 36.000 +/+ VESA, 800 x 600 37.879 60.317 40.000 +/+ VESA, 800 x 600 48.077 72.188 50.
10 Specifications S22C150N Resolution Horizontal Frequency (kHz) Vertical Frequency (Hz) Pixel Clock (MHz) Sync Polarity (H/V) IBM, 720 x 400 31.469 70.087 28.322 -/+ MAC, 640 x 480 35.000 66.667 30.240 -/- MAC, 832 x 624 49.726 74.551 57.284 -/- MAC, 1152 x 870 68.681 75.062 100.000 -/- VESA, 640 x 480 31.469 59.940 25.175 -/- VESA, 640 x 480 37.861 72.809 31.500 -/- VESA, 640 x 480 37.500 75.000 31.500 -/- VESA, 800 x 600 35.156 56.250 36.
Appendix Contact SAMSUNG WORLD WIDE If you have any questions or comments relating to Samsung products, please contact the SAMSUNG customer care center. NORTH AMERICA U.S.A 1-800-SAMSUNG (726-7864) http://www.samsung.com CANADA 1-800-SAMSUNG (726-7864) http://www.samsung.com/ca (English) http://www.samsung.com/ca_fr (French) MEXICO 01-800-SAMSUNG (726-7864) http://www.samsung.com LATIN AMERICA ARGENTINE 0800-333-3733 http://www.samsung.com BOLIVIA 800-10-7260 http://www.samsung.
Appendix LATIN AMERICA GUATEMALA 1-800-299-0013 http://www.samsung.com/latin (Spanish) http://www.samsung.com/latin_en (English) HONDURAS 800-27919267 http://www.samsung.com/latin (Spanish) http://www.samsung.com/latin_en (English) JAMAICA 1-800-234-7267 http://www.samsung.com NICARAGUA 00-1800-5077267 http://www.samsung.com/latin (Spanish) http://www.samsung.com/latin_en (English) PANAMA 800-7267 http://www.samsung.com/latin (Spanish) http://www.samsung.
Appendix EUROPE CYPRUS 8009 4000 only from landline http://www.samsung.com (+30) 210 6897691 from mobile and land line CZECH 800 - SAMSUNG (800-726786) http://www.samsung.com Samsung Electronics Czech and Slovak, s.r.o., Oasis Florenc, Sokolovská 394/17, 180 00, Praha 8 till 8.2.2013 . From 8.2.2013: Samsung Electronics Czech and Slovak, s.r.o. V Parku 2343/24, 148 00 - Praha 4 DENMARK 70 70 19 70 http://www.samsung.com EIRE 0818 717100 http://www.samsung.com ESTONIA 800-7267 http://www.
Appendix EUROPE PORTUGAL 808 20 - SAMSUNG (808 20 7267) http://www.samsung.com ROMANIA 08008 SAMSUNG (08008 726 7864) http://www.samsung.com TOLL FREE No. SERBIA +381 11 321 6899 http://www.samsung.com (old number still active 0700 7267864) SLOVAKIA 0800 - SAMSUNG (0800-726 786) http://www.samsung.com SPAIN 902 - 1 - SAMSUNG (902 172 678) http://www.samsung.com SWEDEN 0771 726 7864 (SAMSUNG) http://www.samsung.com SWITZERLAND 0848-SAMSUNG (7267864, CHF 0.08/min) http://www.samsung.
Appendix ASIA PACIFIC AUSTRALIA 1300 362 603 http://www.samsung.com CHINA 400-810-5858 http://www.samsung.com HONG KONG (852) 3698 - 4698 http://www.samsung.com/hk (Chinese) http://www.samsung.com/hk_en (English) INDIA 1800 3000 8282 1800 266 8282 http://www.samsung.com/in INDONESIA 0800-112-8888 021-5699-7777 http://www.samsung.com/id JAPAN 0120-327-527 http://www.samsung.com MALAYSIA 1800-88-9999 http://www.samsung.com/my NEW ZEALAND 0800 SAMSUNG (0800 726 786) http://www.samsung.
Appendix MENA KUWAIT 183-2255 (183-CALL) http://www.samsung.com/ae (English) http://www.samsung.com/ae_ar (Arabic) MOROCCO 080 100 2255 http://www.samsung.com OMAN 800-SAMSUNG (726-7864) http://www.samsung.com/ae (English) http://www.samsung.com/ae_ar (Arabic) QATAR 800-2255 (800-CALL) http://www.samsung.com/ae (English) http://www.samsung.com/ae_ar (Arabic) SAUDI ARABIA 9200-21230 http://www.samsung.com/sa (Arabic) SYRIA 18252273 http://www.samsung.
Appendix Responsibility for the Pay Service (Cost to Customers) When the service is requested, in spite of in warranty, we may charge you for a visit from a service technician in the following cases. Not a product defect Cleaning of the product, Adjustment, Explanation, Re-installation and etc. If a service technician gives instructions on how to use product or simply adjusts options without disassembling product. If a defect is caused by external environmental factors.
Appendix Correct Disposal Correct Disposal of This Product (Waste Electrical & Electronic Equipment) (Applicable in countries with separate collection systems) This marking on the product, accessories or literature indicates that the product and its electronic accessories (e.g. charger, headset, USB cable) should not be disposed of with other household waste at the end of their working life.
Appendix Terminology OSD (On Screen Display) On screen display (OSD) allows you to customize on-screen settings to optimize the picture quality as required. You can change the screen brightness, tint, size and many other settings using menus displayed on the screen. Gamma The Gamma menu adjusts the grey scale that represents middle tones on the screen. Adjusting the brightness brightens the whole screen, but adjusting Gamma only brightens the medium brightness.
Appendix Resolution Resolution is the number of horizontal pixels and vertical pixels that form a screen. It represents the level of display detail. A higher resolution displays a greater amount of information on the screen and is suitable for performing multiple tasks at the same time. E.g. A resolution of 1366 x 768 consists of 1366 horizontal pixels (horizontal resolution) and 768 vertical lines (vertical resolution). E.g.
Index B INFORMATION 64 Before Connecting 31 Installation 24 Blue 51 Brightness 40 K Key Repeat Time 62 C Checking the Contents 19 Cleaning 8 L Language 54 Coarse 47 Color Tone 52 Connecting and Using a PC 33 Contact SAMSUNG WORLD WIDE 83 Contrast 41 M MagicTune 66 MultiScreen 68 Copyright 7 Correct Disposal 90 O Correct posture to use the product 18 Off Timer 60 Customized Key 63 P D Parts 21 Display Time 56 Q E Q & A 73 Eco Saving 59 R F Red 49 Fine 48 Requirements Before Contactin
Index Sharpness 42 Standard Signal Mode Table 80 T Terminology 91 Transparency 57 Turn Off After 61 Index 94