Instruction Manual

ENGLISH
Digital Still Camera mode
Inserting and ejecting the Memory Stick
● Inserting the Memory Stick
1. Turn the Power switch to OFF.
2. Insert the Memory Stick into the CARD slot located beneath the camcorder,
in the direction of the arrow.
● Ejecting the Memory Stick
1. Turn the Power switch to OFF.
2. Push the Memory Stick, then it comes out of the camcorder automatically.
3. Pull out the Memory Stick.
Notes
■
If you set the camcorder to M.PLAY mode,
the last recorded still image appears.
- If there are no recorded images on the Memory Stick, NO STORED PHOTO! or NO
STORED MPEG4! and will display on the screen.
■
While recording, loading, erasing, or formatting, do not turn off the power or change the mode.
■
Please turn the power off before you insert or eject the Memory Stick.
You could lose data on the Memory Stick.
■
Do not allow metal substances to come in contact with the terminals of the Card.
■
Do not bend the Card.
■
After pulling the card out from the camcorder, please keep the Memory Stick in a soft case to prevent static shock.
■
The stored contents may be changed or lost as a result of misuse, static electricity, electric noise or repair.
Save important images separately.
■
Samsung is not responsible for data loss due to misuse.
■
If the USB cable is connected to the camcorder, the , (S.SHOW), (FWD), (REV) buttons are not
available in M.PLAY mode.
8181
00616B SCD23-SEA(59~103) 5/12/03 9:53 AM Page 81