ENGLISH Digital Video Camcorder SC-D453/D455/D457 AF CCD LCD Auto Focus Charge Coupled Device Liquid Crystal Display Owner’s Instruction Book Before operating the unit, please read this Instruction Book thoroughly, and retain it for future reference.
ENGLISH Notices and Safety Instructions Safety Instructions CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER(OR BACK). NO USER SERVICEABLE PARTS INSIDE, REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. To prevent electric shock, match wide blade of plug to wide slot and fully insert.
ENGLISH Notices and Safety Instructions 9. VENTILATION: Slots and openings in the cabinet are provided for ventilation to ensure reliable operation of the CAMCORDER and to protect it from overheating. These openings must not be blocked or covered. Never place your CAMCORDER on a bed, sofa, rug, or other similar surface: on or near a radiator or heat register.
ENGLISH Notices and Safety Instructions 14. LIGHTNING: For added protection of this CAMCORDER during a lightning storm or when it is left unattended and unused for long periods of time, unplug it from the wall outlet and disconnect the antenna or cable system. This will prevent damage to the CAMCORDER due to lightning and power-line surges. 15.
ENGLISH Notices and Safety Instructions 22. To prevent damage which may result in fire or shock hazard, do not expose this appliance to rain or moisture. 23. If this power supply is used at 240V ac, a suitable plug adapter should be used.
ENGLISH Contents Notes and Safety Instructions ....................................................................................................................................... 6 Getting to Know Your Camcorder ............................................................................................................................. 11 Features .............................................................................................................................................................
ENGLISH Contents Basic Recording ........................................................................................................................................................... 35 Using the Viewfinder ..................................................................................................................................................................................................................35 Adjusting the Focus .................................................................
ENGLISH Contents Applying Digital Effects...............................................................................................................................................................................................................64 Selecting the Digital Effects...................................................................................................................................................................................................
ENGLISH Contents Selecting the Image Quality .......................................................................................................................................................................................................90 Select the Image Quality .......................................................................................................................................................................................................90 Number of Images on the Memory Card .
ENGLISH Notes and Safety Instructions Notes regarding the Rotation of the LCD Screen Please rotate the LCD screen carefully as illustrated. Over rotation may cause damage to the inside of the hinge that connects the LCD screen to the Camcorder. 1 1. LCD screen closed. 2. Standard recording using the LCD screen. ■ Open the LCD screen with your finger. 2 3. Recording when looking at the LCD screen from the top. 3 LCD open 4. Recording when looking at the LCD screen from the front. 5.
ENGLISH Notes and Safety Instructions Notices regarding Copyright Television programs, video tapes, DVD titles, films, and other program materials may be copyrighted. Unauthorized copying of copyrighted material may be against the law. All the trade names and registered trademarks mentioned in this manual or other documentation provided with your Samsung product are trademarks or registered trademarks of their respective holders. Notes regarding Moisture Condensation 1.
ENGLISH Notes and Safety Instructions Notes regarding the Battery Pack ■ ■ ■ ■ ■ ■ ■ Be sure to use a recommended battery pack as described on page 22. The batteries are available at a SAMSUNG retailer. Make sure that the Battery pack is fully charged before starting to record. To preserve battery power, keep your Camcorder turned off when you are not operating it.
ENGLISH Notes and Safety Instructions Note regarding the Lens Do not film with the camera lens pointing directly at the sun. Direct sunlight can damage the CCD(Charge Coupled Device). Notes regarding electronic Viewfinder 1. Do not position the Camcorder such that the Viewfinder is pointing towards the sun. Direct sunlight can damage the inside of the Viewfinder. Be careful when placing the Camcorder under sunlight or near a window exposed to sunlight. 2.
ENGLISH Notes and Safety Instructions Precautions regarding the Lithium battery 1. The camcorder’s built-in lithium battery maintains the clock function and user settings, even if the battery pack or AC adapter is removed. 2. The lithium battery for the camcorder lasts about 3 months under normal operation from the time of installation. 3. When the lithium battery becomes weak or is dead, the date/time indicator will display “12:00 AM JAN. 1,2005” when you set the DATE/TIME to On.
ENGLISH Getting to Know Your Camcorder Features ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ Multi OSD Language You can select the desired OSD language among English, French, Spanish, German, Italian, Portuguese, Polish and Dutch. Digital Data Transfer Function with IEEE1394 By incorporating the IEEE 1394 (i.LINK™: i.
ENGLISH Getting to Know Your Camcorder Accessories Supplied with Camcorder Make sure that the following basic accessories are supplied with your digital video camera. Basic Accessories 1. 2. 3. 4. 5. 6. 7. 8. 9. Lithium Ion Battery Pack AC Power Adapter (AA-E8 TYPE) AC Cord Multi-AV Cable (Audio/Video/S-Video Cable) Instruction Book USB Cable Software CD Lens Cover Lens Cover Strap 1. Lithium Ion Battery Pack AD43-00136A 4. Multi-AV Cable (Audio/Video/S-Video Cable) 2.
ENGLISH Getting to Know Your Camcorder Front & Left View 1. Lens 6. EASY.Q button 2. LED Light (SC-D455/D457 only) 7. TFT LCD Screen 3. Remote Sensor (SC-D457 only) 8. IEEE1394 Jack 4. Hand Strap Hook 9. USB Jack 10. AV/S-Video Jack 5. Internal MIC 11. Jack Cover 1. Lens 5. Internal MIC 9. USB Jack 2. LED Light (see page 49) (SC-D455/D457 only) 6. EASY.Q button (see page 40) 10. AV/S-Video Jack 3. Remote Sensor (SC-D457 only) 7. TFT LCD Screen 11. Jack Cover 8. IEEE1394 Jack 4.
ENGLISH Getting to Know Your Camcorder Left Side View 4. Focus Adjustment Knob 5. Viewfinder 6. Function buttons 1. Speaker FADE 2. Mode Switch BLC S.SHOW MULTI REC SEARCH 7. COLOR NITE/PB ZOOM 3. DISPLAY 1. Speaker 6. Function buttons 2. Mode Switch (MEMORY/TAPE) PLAYER - CAMERA EASY.Q 3. DISPLAY (see page 25) : REW REC SEARCH – 4. Focus Adjustment Knob : FF REC SEARCH + FWD 5. Viewfinder : PLAY/STILL FADE S.SHOW(SLIDE SHOW) : STOP BLC MULTI 7.
ENGLISH Getting to Know Your Camcorder Right & Top View 6. TAPE EJECT 1. Menu Selector (VOL/MF) 7. Zoom Lever 2. MENU button 8. PHOTO button 9. External MIC 10. Cassette Door 3. Start/Stop button 4. Power Switch 5. DC Jack 1. Menu Selector (VOL/MF) 6. TAPE EJECT 2. MENU button 7. Zoom Lever 3. Start/Stop button 4. Power Switch (CAMERA or PLAYER) 8. PHOTO button (see page 67) 5. DC Jack 9. External MIC 10.
ENGLISH Getting to Know Your Camcorder Rear & Bottom View 4. Battery Release 1. Memory Card Slot 2. Charging indicator 3. Tripod Receptacle 1. Memory Card Slot 2. Charging indicator Memory Card Slot (Usable Memory Card) SC-D453 only 3. Tripod Receptacle 4.
ENGLISH Getting to Know Your Camcorder Remote Control (SC-D457 only) 18. DISPLAY 1. PHOTO 2. START/STOP 3. SELF TIMER 4. ZERO MEMORY 5. PHOTO SEARCH 6. A.DUB 7. (FF) 8. (REW) 9. (PLAY) 10. / 17. Zoom 16. X2 15. DATE/TIME 14. (SLOW) 13. (STILL) 12. (STOP) 11. F. ADV (Direction) 1. PHOTO (see page 67) 10. 2. START/STOP 11. F. ADV (see page 73) 3. SELF TIMER (see page 43) 12. (STOP) 4. ZERO MEMORY (see page 42) 13. (STILL) 5. PHOTO SEARCH (see page 67) 14. (SLOW) 6. A.DUB (see page 76) 15.
ENGLISH Preparation Adjusting the Hand Strap It is very important to ensure that the Hand strap has been correctly adjusted before you begin your recording. The Hand strap enables you to: - Hold the Camcorder in a stable, comfortable position. - Press the ZOOM and Start/Stop button without having to change the position of your hand. 18 Hand Strap 1. Insert the Hand strap into the Hand strap hook on the front side of the Camcorder and pull its end through the hook. 2.
ENGLISH Preparation Lithium Battery Installation (SC-D457 only) Battery Installation for the Remote Control ✤ You need to insert or replace the Lithium battery when: - You purchase the Camcorder. - The remote control doesn’t work. ✤ Position the Lithium battery in the Lithium battery holder, with the positive ( ✤ Be careful not to reverse the polarity of the battery. ) terminal face up. [ Notes ] ■ The Lithium battery must be inserted in the correct direction.
ENGLISH Preparation Connecting a Power Source There are two types of power source that can be connected to your Camcorder. - The AC Power adapter and AC Cord: used for indoor recording. - The Battery pack: used for outdoor recording. To use the AC Power Adapter and DC Cable 1. Connect the AC Power adapter to the AC Cord. 2. Connect the AC Cord to a wall socket. [ Notes ] ■ You must use an AA-E8 TYPE AC Power adapter. ■ The plug and wall socket type may differ according to your resident country.
ENGLISH Preparation Using the Lithium Ion Battery Pack ✤ The amount of continuous recording time available depends on - The type and capacity of the Battery pack you are using. - How often the zoom function is used. It is recommended that you have several batteries available. Charging the Lithium Ion Battery Pack 1. Attach the Battery pack to the Camcorder. 2. Connect the AC Power adapter to an AC Cord and connect the AC Cord to a wall socket. 3.
ENGLISH Preparation Table of continuous Recording Time based on Model and Battery Type. ✤ ✤ If you close the LCD screen, it switches off and the Viewfinder switches on automatically. The continuous recording time given in the table below are approximations. Actual recording time depends on usage. Time Continuous recording time Battery Charging time LCD ON VIEWFINDER ON SB-LSM80 (AD43-00136A) Approx. 1hr 20min Approx. 1hr 20min Approx. 1hr 30min SB-LSM160 (AD43-00148A) Approx. 3hr Approx.
ENGLISH Preparation Battery Level Display The battery level display indicates the amount of power remaining in the Battery pack. a. b. c. d. e. Fully charged 20~40% used 40~80% used 80~95% used Completely used (Blinking) (The Camcorder will turn off soon. Change the battery as soon as possible) [ Notes ] (Blinking) ■ Please refer to the Table on page 22 for approximate continuous recording time. ■ The recording time is affected by temperature and environmental conditions.
ENGLISH Preparation OSD (On Screen Display in Camera/Player Modes) 1. Battery Level (see page 23) 2. Digital Effects mode (see page 64) OSD in Camera Mode 20. Tape Counter 26 25 24 23 22 21 4. DIS (see page 60) 21. Zero Memory (SC-D457 only) (see page 42) 5. Program AE (see page 62) 22. Record Speed mode 6. White Balance mode (see page 58) 23. Operating mode 7. Shutter Speed (see page 56) 25. Photo Image 8. Exposure (see page 56) 26. Tele Macro (see page 45) 9. Manual Focus (see page 57) 27.
ENGLISH Preparation OSD (On Screen Display in M.Cam/M.Player Modes) 1. Photo Quality 2. CARD (Memory Card) indicator 3. Image Counter Total number of recordable still images. 4. Image Recording and Loading indicator 5. Erase Protection indicator (see page 96) 6. Print Mark (see page 107) 7. Folder Number-File Number (see page 88) 8. JPEG Image Size 9. Slide Show OSD in M.Cam Mode 4 3 46 2 min 2 No Memory Card ! 1 [29] 12:00 AM JAN.
ENGLISH System Menu Setting Selecting the OSD Language ✤ ✤ The Language function works in Camera/Player/M.Cam/M.Player modes. Select the appropriate OSD Language among English, French, Spanish, German, Italian, Portuguese, Polish and Dutch. 1. Set the Power switch to CAMERA or PLAYER. 1 2. Set the Mode switch to TAPE or MEMORY. 3. Press the MENU button. ■ The menu list will appear. 4. Move the Menu selector to the left or right to select System, then press the Menu selector. 5.
ENGLISH System Menu Setting Setting the Clock ✤ ✤ Clock setup works in Camera/Player/M.Cam/M.Player modes. The Date/Time is automatically recorded onto a tape. Before recording, please set the Date/Time. 4 1. Set the Power switch to CAMERA or PLAYER. 2. Set the Mode switch to TAPE or MEMORY. 3. Press the MENU button. ■ The menu list will appear. 4. Move the Menu selector to the left or right to select System, then press the Menu selector. 5.
ENGLISH System Menu Setting Setting the Wireless Remote Control Acceptance (Remote) (SC-D457 only) ✤ ✤ The Remote function works in Camera/Player/M.Cam/M.Player modes. The Remote option allows you to enable or disable the remote control for use with the Camcorder. 1. Set the Power switch to CAMERA or PLAYER. 1 2. Set the Mode switch to TAPE or MEMORY. 3. Press the MENU button. ■ The menu list will appear. 4. Move the Menu selector to the left or right to select System, then press the Menu selector.
ENGLISH System Menu Setting Setting the Beep Sound ✤ ✤ The Beep Sound function works in Camera/Player/M.Cam/M.Player modes. You can turn the Beep Sound on or off. When on, each press of a button sounds a beep. 1. Set the Power switch to CAMERA or PLAYER. 1 2. Set the Mode switch to TAPE or MEMORY. 3. Press the MENU button. ■ The menu list will appear. 4. Move the Menu selector to the left or right to select System, then press the Menu selector. 4 5.
ENGLISH System Menu Setting Setting the Shutter Sound ✤ ✤ The Shutter Sound function works in both Player and M.Cam modes. You can turn the Shutter Sound on or off. When on, a simulated shutter click of a camera will sound while taking pictures. 1. Set the Power switch to CAMERA or PLAYER. 1 2. If the Power switch is set to CAMERA mode, set the Mode switch to MEMORY. If the Power switch is set to PLAYER mode, set the Mode switch to TAPE. 3. Press the MENU button. ■ The menu list will appear. 4.
ENGLISH System Menu Setting Viewing the Demonstration ✤ ✤ Before you begin: Make sure that there is no tape inserted in the Camcorder. (See page 36) Demonstration automatically shows you the major functions that are included with your Camcorder so that you may use them more easily. ✤ The Demonstration function may only be used in the Camera mode without a tape inserted in the Camcorder. ✤ The Demonstration operates repeatedly until the Demonstration mode switched off. 1 1.
ENGLISH Display Menu Setting Adjusting the LCD Screen ✤ ✤ This function works in Camera/Player/M.Cam/M.Player modes. Your Camcorder is equipped with a 2.5 inch color Liquid Crystal Display(LCD) screen, which enables you to view what you are recording or playing back directly. ✤ Depending on the conditions under which you are using the Camcorder (indoors or outdoors for example), you can adjust; - LCD Bright - LCD Color 1 1. Set the Power switch to CAMERA or PLAYER. 2.
ENGLISH Display Menu Setting Displaying the Date/Time ✤ ✤ The Date/Time function works in Camera/Player/M.Cam/M.Player modes. The Date and Time are automatically recorded on a special data area of the tape. 1. Set the Power switch to CAMERA or PLAYER. 1 2. Set the Mode switch to TAPE or MEMORY. 3. Press the MENU button. ■ The menu list will appear. 4. Move the Menu selector to the left or right to select Display, then press the Menu selector. 4 5.
ENGLISH Display Menu Setting Setting the TV Display ✤ ✤ The TV Display function works in Camera/Player/M.Cam/M.Player modes. You can select the output path of the OSD (On Screen Display). - Off: The OSD appears in the LCD screen and Viewfinder only. - On: The OSD appears in the LCD screen, Viewfinder and TV. - Use the DISPLAY button located at the left side of the Camcorder to turn the OSD on/off on the LCD screen/Viewfinder/TV. 1. Set the Power switch to CAMERA or PLAYER. 1 2.
ENGLISH Basic Recording Using the Viewfinder ✤ The Viewfinder will work when the LCD screen is closed. Adjusting the Focus The focus adjustment knob of the Viewfinder enables individuals with vision problems to see clearer images. 1. Close the LCD screen and pull out the Viewfinder. 2. Use the focus adjustment knob of the Viewfinder to focus the picture. [ Notes ] ■ Viewing the sun or any strong light source through the Viewfinder for a prolonged period may be harmful, or cause temporary impairment.
ENGLISH Basic Recording Inserting and Ejecting a Cassette ✤ ✤ When inserting a tape or closing the cassette compartment, do not apply excessive force, as it may cause a malfunction. Do not use any tape other than Mini DV cassettes. 1. Turn on your Camcorder, then slide the TAPE EJECT switch on the upper of the Camcorder and open the cassette door until it clicks. ■ The cassette holder automatically rises and opens forward. 2.
ENGLISH Basic Recording Hints for Stable Image Recording ✤ ✤ While recording, it is very important to hold the Camcorder correctly. Fix the lens cover firmly by clipping it to the hand strap. (see page 18) Recording with the LCD Screen 1. Hold the Camcorder firmly using the hand strap. 2. Place your right elbow against your side. 3. Place your left hand under or beside the LCD screen to support and adjust it. Do not touch the built-in microphone. 4.
ENGLISH Basic Recording Various Recording Techniques ✤ In some situations different recording techniques may be required for more dramatic results. 1. General recording. 1 2 3 4 2. Downward recording. Making a recording with a top view of the LCD screen. 3. Upward recording. Making a recording viewing the LCD screen from below. 4. Self recording. Making a recording viewing the LCD screen from the front. 5. Recording with the Viewfinder.
ENGLISH Basic Recording Making your First Recording 1. Connect a power source to the Camcorder. (see page 20) (A Battery pack or a AC Power adapter) Insert a cassette. (see page 36) 1 2 4 3 2. Remove the Lens cover. Release the write protection tab to record. ■ ■ √ √ 3. Set the Power switch to CAMERA. ■ Open the LCD screen. ■ Set the Mode switch to TAPE. Make sure that STBY is displayed. ■ If the write protection tab of the cassette is open(set to save), STOP and Protection! will be displayed.
ENGLISH Basic Recording Using EASY.Q Mode (for Beginners) ✤ ✤ The EASY.Q mode works only in Camera mode. The EASY.Q mode allows a beginner to easily make good recordings. 1. Set the Power switch to CAMERA. 1 2. Set the Mode switch to TAPE. 3. By pressing the EASY.Q button, all functions on the camera will be set to off and the recording settings will be set to the following basic modes: ■ The word EASY.Q will appear on the LCD screen at the same time.
ENGLISH Basic Recording When a cassette is loaded and the Camcorder is left in STBY mode for more than 5 minutes without being used, it will switch off automatically. To use it again, press the Start/Stop button or set the Power switch to OFF and then back to CAMERA. This auto power off feature is designed to save battery power. Record Search (REC SEARCH) ■ You can view a recording using the REC SEARCH +, - function in STBY mode.
ENGLISH Basic Recording Setting the Zero Memory (SC-D457 only) ✤ ✤ The Zero Memory function works in both Camera and Player modes. You can mark a point on a tape that you want to return to following playback. 1. Set the Power switch to CAMERA or PLAYER. 1 2. Set the Mode switch to TAPE. 3. Press the ZERO MEMORY button on the remote control before the recording or during playback at the point where you wish to return.
ENGLISH Basic Recording Self Record using the Remote Control (SC-D457 only) ✤ ✤ The Self Timer function works only in Camera mode. When you use the Self Timer function on the remote control, the recording begins automatically in 10 seconds. 1. Set the Power switch to CAMERA. 1 2. Set the Mode switch to TAPE. 3. Press the SELF TIMER button until the appropriate indicator is displayed in the LCD screen. 4. Press the Start/Stop button to start the timer.
ENGLISH Basic Recording Zooming In and Out ✤ ✤ The Zoom function works in both Camera and M.Cam modes. Zooming is a recording technique that lets you change the size of the subject in a scene. ✤ You can zoom using variable zoom speeds. ✤ Use these features for different shots. Please note that over-use of the zoom feature can lead to unprofessional looking results and a reduction of battery usage time. 1. Move the Zoom Lever slightly for a gradual zoom, move it further for a high-speed zoom.
ENGLISH Basic Recording Using the Tele Macro ✤ ✤ The Tele Macro function works in both Camera and M.Cam mode. Effective focal distance in Tele Macro mode is 50 Cm (19.7 inches) ~ 100 Cm (39.4 inches). 1. Set the Power switch to CAMERA. 4 2. Set the Mode switch to TAPE or MEMORY. 3. Press the MENU button. ■ The menu list will appear. 4. Move the Menu selector to the left or right to select Camera, then press the Menu selector. 5.
ENGLISH Basic Recording Using Quick Menu: Tele Macro ✤ ✤ Quick menu is used to access Camcorder functions by simply using the Menu selector. Quick menu provides easier access to the frequently used menus without using the MENU button. 1. Press the Menu selector. 1 STBY Macro DIS Program AE White Balance Shutter Exposure Manual Focus 2. Move the Menu selector to the left or right to select Macro, then press the Menu selector. 3.
ENGLISH Basic Recording Using the Fade In and Out ✤ ✤ The Fade function works only in Camera mode. You can give your recording a professional look by using special effects such as fade in at the beginning of a sequence or fade out at the end of a sequence. To Start Recording 1. Set the Power switch to CAMERA. 2. Set the Mode switch to TAPE. 3. Before recording, hold down the FADE button. ■ The picture and sound gradually disappear (fade out). 4.
ENGLISH Basic Recording Using Back Light Compensation Mode (BLC) ✤ ✤ BLC works in both Camera and M.Cam modes. Back lighting exists when the subject is darker than the background: - The subject is in front of a window. - The person to be recorded is wearing white or shiny clothes and is placed against a bright background; the person’s face is too dark to distinguish his/her features. - The subject is outdoors and the background is overcast. - The light sources are too bright.
ENGLISH Basic Recording Using the Color Nite/LED Light (SC-D455/D457 only) ✤ ✤ ✤ ✤ ✤ Color Nite function works only in Camera mode. Shutter speed can be controlled, allowing you to record slow moving objects. Color Nite function may produce a brighter image. The LED light can be used with Color Nite function only. (SC-D455/D457 only) The LED light enables you to record a subject in dark places without sacrificing color. (SC-D455/D457 only) 1. 2. 3. 4. Set the Power switch to CAMERA.
ENGLISH Advanced Recording Use of various Functions Setting menu Items Main Menu Camera Tape Record Memory Sub Menu Program AE Selecting the Program AE Function White Balance Setting White Balance Digital Effect Setting the Digital special effect Macro Setting the Tele Macro DIS Selecting the Digital Image Stabilizing Digital Zoom Selecting Digital Zoom Photo Search Searching pictures recorded in Tape Photo Copy Copying still images from a cassette to Memory card Audio Select Selecting
ENGLISH Advanced Recording Main Menu Display System Sub Menu Functions LCD Bright Setting the Brightness tone of the LCD screen LCD Color Setting the Color tones of the LCD screen Date/Time Setting the Date and Time TV Display Selecting OSD on/off of TV Clock Set Setting the time Remote ! Using the remote control Beep Sound Setting the Beep sound Shutter Sound Setting the Shutter sound USB Version Setting the USB Version USB Connect Selecting the USB device Language Selecting the O
ENGLISH Advanced Recording Function availability in each Mode Operating Mode Requested Mode DIS Digital Zoom PHOTO (TAPE) Color Nite Shutter ✕ ✩ ✕ ✕ ✕ The other Digital Effect O ✩ ✩ ✩ ✩ O ✕ ✕ ✕ ✕ ✕ ✕ O Digital Zoom PHOTO (TAPE) ✕ ✕ ✕ ✕ 16:9 Wide ✕ ✕ Emboss2 Pastel2 Mirror Mosaic ✕ O O O Color Nite Shutter Digital Effects The other Digital Effect Digital Effects Digital functions DIS O 16:9 Wide Emboss2, Pastel2 Mirror, Mosaic O O : The requested mode will work
ENGLISH Advanced Recording Selecting the Record Mode ✤ ✤ The Record Mode function works in both Camera and Player modes. This Camcorder records and plays back in SP (standard play) mode and in LP (long play) mode. - SP (standard play): This mode permits 60 minutes of recording time with a DVM60 tape. - LP (long play): This mode permits 90 minutes of recording time with a DVM60 tape. 1. Set the Power switch to CAMERA or PLAYER. 4 2. Set the Mode switch to TAPE.
ENGLISH Advanced Recording Selecting the Audio Mode ✤ ✤ The Audio Mode function works in both Camera and Player modes. This Camcorder records sound in two ways. (12Bit, 16Bit) - 12Bit: You can record two 12Bit stereo sound tracks. The original stereo sound can be recorded onto the Main (Sound1) track. Additional stereo sound can be dubbed onto the Sub (Sound2) track. - 16Bit: You can record one high quality stereo sound using the 16Bit recording mode. Audio dubbing is not possible when using this mode.
ENGLISH Advanced Recording Cutting Off Wind Noise (Wind Cut) ✤ The Wind Cut function works in both Camera and Player (Audio dubbing) modes. ✤ The Wind Cut function minimizes wind noise or other noise while recording. - When the wind cut is on, some low pitched tones sounds are eliminated along with the sound of the wind. Use the Wind Cut when recording in windy places such as the beach or near buildings. 1. Set the Power switch to CAMERA or PLAYER. 4 2. Set the Mode switch to TAPE. 3.
ENGLISH Advanced Recording Setting the Shutter Speed & Exposure ✤ ✤ ✤ The Shutter Speed function works only in Camera mode. The Exposure function works in both Camera and M.Cam modes. Quick menu is used to access Camcorder functions by simply using the Menu selector. 3 1. 2. 3. 4. Set the Power switch to CAMERA. Set the Mode switch to TAPE. Press the Menu selector. Move the Menu selector to the left or right to select Shutter or Exposure, then press the Menu selector. 5.
ENGLISH Advanced Recording Auto Focus/Manual Focus ✤ ✤ The Auto Focus/Manual Focus function works in both Camera and M.Cam modes. In most situations, it is better to use the automatic focus feature, as it enables you to concentrate on the creative side of your recording. ✤ Manual focusing may be necessary under certain conditions that make automatic focusing difficult and/or unreliable. a ✤ Manual Focus can be set in the Quick Menu.
ENGLISH Advanced Recording Setting the White Balance ✤ ✤ ✤ The White Balance function works in both Camera and M.Cam modes. The White Balance is a recording function that preserves the unique image color of the object in any recording condition. You may select the appropriate White Balance mode to obtain good quality image color. ■ Auto ( A ): This mode is generally used to control the White Balance automatically. ■ Hold ( ):This holds the current White Balance value.
ENGLISH Advanced Recording Using Quick Menu: White Balance Quick menu is used to access Camcorder functions by using the Menu selector. Quick menu provides easier access to frequently used menus without using the MENU button. 1. Press the Menu selector. 1 3. Move the Menu selector to the left or right to select desired mode (Auto, Hold, Indoor or Outdoor), then press the Menu selector. 4. To exit, press the MENU button. STBY Macro DIS Program AE White Balance Shutter Exposure Manual Focus 2.
ENGLISH Advanced Recording Setting the Digital Image Stabilizer (DIS) ✤ ✤ The DIS function works only in Camera mode. DIS (Digital Image Stabilizer) is a function that compensates for any shaking or hand movement while holding the Camcorder (within reasonable limits). ✤ It provides more stable pictures when: - Recording with the optical zoom (Under 10x. DIS is not available in Digital Zoom mode.
ENGLISH Advanced Recording Using Quick Menu: Digital Image Stabilizer (DIS) ✤ ✤ Quick menu is used to access Camcorder functions by simply using the Menu selector. Quick menu provides easier access to the frequently used menus without using the MENU button. 1. Press the Menu selector. 1 STBY Macro DIS Program AE White Balance Shutter Exposure Manual Focus 2. Move the Menu selector to the left or right to select DIS, then press the Menu selector. 3.
ENGLISH Advanced Recording Programmed Automatic Exposure Modes (Program AE) ✤ ✤ ✤ The Program AE function works only in Camera mode. The Program AE mode allows you to adjust shutter speeds and apertures to suit different recording conditions. They give you creative control over the depth of field. ■ Auto mode ( A ) - Auto balance between the subject and the background. - To be used in normal conditions. - The shutter speed automatically varies from 1/60 to 1/250 per second, depending on the scene.
ENGLISH Advanced Recording Setting the Program AE 1. Set the Power switch to CAMERA. 4 Camera Mode √Camera Program AE White Balance Digital Effect Macro DIS Digital Zoom 2. Set the Mode switch to TAPE. 3. Press the MENU button. ■ The menu list will appear. Move 4. Move the Menu selector to the left or right to select Camera, then press the Menu selector. 6 6. Move the Menu selector to the left or right to select desired program AE option, then press the Menu selector. 7.
ENGLISH Advanced Recording Applying Digital Effects ✤ ✤ ✤ ✤ The Digital Effect function works only in Camera mode. The Digital Effects enable you to give a creative look to your recording. Select the appropriate digital effect for the type of picture that you wish to record and the effect you wish to create. There are 11 digital effect modes. 1 2 1. ART mode This mode gives the images a coarse effect. 2. Mosaic mode 3 4 This mode gives the images a mosaic effect. 3.
ENGLISH Advanced Recording Selecting the Digital Effects 1. Set the Power switch to CAMERA. 1 2. Set the Mode switch to TAPE. 3. Press the MENU button. ■ The menu list will appear. 4. Move the Menu selector to the left or right to select Camera, then press the Menu selector. 4 5. Move the Menu selector to the left or right to select Digital Effect, then press the Menu selector. 6. Move the Menu selector to the left or right to select the desired digital effect mode, then press the Menu selector.
ENGLISH ENGLISH Advanced Recording Zooming In and Out with Digital Zoom ✤ Zoom works only in Camera mode. Selecting the Digital Zoom Zooming more than 10x is achieved digitally, up to 900x when combined with optical zoom. The picture quality may deteriorate depending on how much you zoom in on the subject. ✤ ✤ 1. Set the Power switch to CAMERA. 2. Set the Mode switch to TAPE. 3. Press the MENU button. ■ The menu list will appear. 4.
ENGLISH Advanced Recording Photo Image Recording ✤ Photo image recording works only in Camera mode. 1. Set the Power switch to CAMERA. 2. Set the Mode switch to TAPE. 3. Press the PHOTO button. ■ The still picture is recorded for about 6~7 seconds. 4. After the PHOTO has been recorded, the Camcorder returns to its previous mode. Searching for a Photo Image ✤ The Photo Search works only in Player mode. 1. Set the Power switch to PLAYER. 2. Set the Mode switch to TAPE. 3. Press the MENU button.
ENGLISH Playback Playing back a Tape you have recorded on the LCD Screen ✤ ✤ The Playback function works only in Player mode. You can monitor the playback picture on the LCD screen. 1. Set the Power switch to PLAYER. 1 2. Set the Mode switch to TAPE. 3. Insert the tape you wish to view. (see page 36) 4. Open the LCD screen. ■ Adjust the angle of the LCD screen and set the brightness or color if necessary. 3 5. Press the (REW) button to rewind the tape to the starting point.
ENGLISH Playback Controlling Sound from the Speaker ✤ ✤ The Speaker works only in Player mode. When you use the LCD screen for playback, you will hear recorded sound from the built-in Speaker. - Take the following steps to lower the volume or mute the sound while playing a tape on the Camcorder. 1. Set the Power switch to PLAYER. 3 2. Set the Mode switch to TAPE. 3. Press the (PLAY/STILL) to play the tape. 4. Use the Menu selector to adjust the volume.
ENGLISH Playback Tape Playback ✤ The Playback function works only in Player mode. Playback on the LCD Screen It is easier to view a tape using the LCD screen as opposed to the viewfinder when in a moving automobile or outdoors. ✤ Playback on a TV Monitor To play back a tape, the television must be NTSC compatible. (see page 113) We recommend that you use the AC Power adapter as the power source for the Camcorder. ✤ ✤ Connecting to a TV which has Audio/Video Input Jacks 1.
ENGLISH Playback Connecting to a TV which has no Audio and Video Input Jacks ✤ You can connect your Camcorder to a TV through a VCR. 1. Connect the Camcorder to your VCR with the Multi-AV cable. ■ The yellow jack: Video ■ The white jack: Audio(L) - Mono ■ The red jack: Audio(R) 2. Connect a TV to the VCR. 3. Set the Power switch to PLAYER. 4. Set the Mode switch to TAPE. 5. Turn on both the TV and VCR. ■ Set the input selector on the VCR to Line. ■ Select the channel reserved for your VCR on the TV set.
ENGLISH Playback Various Functions while in Player Mode ✤ ✤ This function works only in Player mode. The PLAY, STILL, STOP, FF and REW buttons are located on the Camcorder and the remote control. (SC-D457 only) ✤ The F.ADV(Frame advance), X2 and SLOW buttons are located on the remote control only. (SC-D457 only) ✤ To prevent tape and head-drum wear, your Camcorder will automatically stop if it is left in still or slow mode for more than 3 minutes.
ENGLISH Playback Frame Advance (To play back frame by frame) (SC-D457 only) ■ œ X2 Playback (Forward/Reverse) (SC-D457 only) Forward X2 playback - Press the X2 button on the remote control during playback. - To resume normal playback, press the (PLAY/STILL) button. ■ Reverse X2 playback - Press the (-) button during forward X2 playback. - To resume normal playback, press the (PLAY/STILL) button. œ ■ Press the F.ADV button on the remote control while in still mode.
ENGLISH Playback Zooming during Playback (PB ZOOM) ✤ ✤ The PB ZOOM function works in Player mode. The PB ZOOM function enables you to magnify the playback or still image. 1. Set the Power switch to PLAYER. 3 2. Set the Mode switch to TAPE. COLOR NITE/ PB ZOOM 3. Press the PB ZOOM button during playback or still mode. 4. The image is magnified starting from the center of image. 5. You can zoom in from 1.2x to 8.0x by moving the Zoom lever. ■ Zoom ratio is not displayed on the screen. 6.
ENGLISH Playback AV In/Out (SC-D457 only) ✤ ✤ 1. 2. 3. 4. 5. AV In/Out function works only in Player mode. AV In/Out setting enables you to record signal from external sources and display it on LCD screen. Also, you can direct your video or image to external devices to record or play back. Connect the Camcorder to your VCR or TV with the Multi-AV cable. (See pages 70~71) Set the Power switch to PLAYER. Set the Mode switch to TAPE. Turn on the VCR or TV.
ENGLISH Playback Audio Dubbing (SC-D457 only) ✤ ✤ ✤ ✤ ✤ The Audio Dubbing function works only in Player Mode. You cannot dub sound on a pre-recorded tape in LP or 16 bit mode. You can add sound to the original sound on a pre-recorded tape recorded in SP mode with 12bit sound. Use the internal or an external microphone (not supplied) or other audio equipment. The original sound will not be erased. Dubbing Sound 1. Set the Power switch to PLAYER.
ENGLISH Playback Dubbed Audio Playback 4 2. Set the Mode switch to TAPE. 3. Insert the dubbed tape and press the MENU button. 4. Move the Menu selector to the left or right to select Tape, then press the Menu selector. 5. Move the Menu selector to the left or right to select Audio Select, then press the Menu selector. Move 6 6. Move the Menu selector to the left or right to select the audio playback channel, then press the Menu selector. ■ Sound[1]: play the original sound.
ENGLISH IEEE 1394 Data Transfer Transferring IEEE1394 (i.LINK)-DV standard data connections Connecting to a DV Device (DVD Recorder, Camcorder, etc.) ■ ■ Connecting to other DV standard products. A standard DV connection is quite simple. If a product has a DV jack, you can transfer data by connecting to the DV jack using the correct cable. NOTE: Please be careful since there are two types of DV ports, (4pin, 6pin). This Camcorder has a 4pin terminal.
ENGLISH IEEE 1394 Data Transfer System Requirements ■ ■ ■ ■ CPU: faster Intel® Pentium III™ 450MHz compatible. Operating system: Windows® 98SE, ME, XP, Mac OS (9.1~10.2) Main memory: more than 64 MB RAM IEEE1394 add-on card or built in IEEE1394 card Recording with a DV Connection Cable 1. Set the Power switch to PLAYER. DV USB 2. Set the Mode switch to TAPE. AV/ S 3. Connect the DV cable (not supplied) from the DV jack of the Camcorder to the DV jack of the other DV device.
ENGLISH USB Interface Transferring a Digital Image through a USB Connection ✤ The camcorder supports both USB 1.1 and 2.0 standards. (Depends on the PC specification) ✤ You can easily transfer recorded files from a Memory Card to a PC without additional add-on cards via a USB connection. ✤ If you transfer data to a PC, you need to install the software (DV Driver, Video Codec, DirectX 9.0) supplied with the Camcorder.
ENGLISH USB Interface Selecting the USB Device ✤ ✤ The USB Connect function works only in M.Player mode. Using the USB cable, you can connect your Camcorder to a computer to copy your movies and images from the Memory card (or built-in memory;SC-D455/D457 only), or to a printer to print your images. 1. Set the Power switch to PLAYER. 1 2. Set the Mode switch to MEMORY. 3. Press the MENU button. ■ The menu list will appear. 4.
ENGLISH USB Interface Setting the USB Communication Speed ✤ ✤ USB Version function works only in M.Cam and M.Player modes. To ensure proper communication between the camcorder and a PC, please set the USB Version before connecting the Camcorder to a PC. 1. Set the Power switch to CAMERA or PLAYER. 1 2. Set the Mode switch to MEMORY. 3. Press the MENU button. ■ The menu list will appear. 4. Move the Menu selector to the left or right to select System, then press the Menu selector. 4 5.
ENGLISH USB Interface Installing DV Media Pro 1.0 Program ✤ To play back MPEG4 movies recorded by the camcorder or streaming data transferred through the USB connection on a PC, the Video Codec program should be installed. ✤ Do not connect the Camcorder to PC before installing the program. ✤ If another camera or scanner is connected, please disconnect it in advance. ✤ This explanation is based on Windows® 98SE OS.
ENGLISH USB Interface Using the PC Camera Function ✤ To use the PC Camera function, the DV Driver, Video Codec and DirectX 9.0. programs must be installed in the PC. ✤ You can use this Camcorder as a PC Camera. This is useful when connecting to a Web site that provides video chatting functions. ✤ When using this camcorder for video conferencing (such as NetMeeting), voice communication may not be supported depending on the video conferencing software.
ENGLISH USB Interface Using the USB Streaming Function ✤ To use USB streaming, the DV Driver, Video Codec, DirectX 9.0. programs must be installed in the PC. ✤ You can view Camcorder video on your PC using USB streaming. ✤ You can also store it as a moving picture in the "avi" file format, or as a still image in the "jpg" file format on a PC. 1. Set the Power switch to CAMERA or PLAYER, set the Mode switch to TAPE. 2.
ENGLISH Digital Still Camera Mode Memory Stick (Optional Accessory) ✤ The Memory Stick stores and manages images recorded by the camera.
ENGLISH Digital Still Camera Mode Inserting and Ejecting the Memory Card Inserting the Memory Card 1. Set the Power switch to OFF. 2. Remove the Lithium-ion battery from the rear of the Camcorder. 3. Insert the Memory Card in the direction of the arrow into the Memory Card slot located on the rear of the Camcorder. Ejecting the Memory Card 1. Set the Power switch to OFF. 2. Push the Memory Card, then it comes out of the Camcorder automatically. 3. Pull out the Memory Card.
ENGLISH Digital Still Camera Mode Structure of Folders and Files on the Memory Card ✤ ✤ ✤ The still images that you recorded are saved in a JPEG file format on the Memory Card. The moving images that you recorded are saved in MPEG4 file format on the Memory Card. Each file has a file number and all files are assigned to a folder. - A file number from DCAM0001 is sequentially assigned to each recorded image. - Each folder is numbered from 100SSDVC and recorded on the Memory Card.
ENGLISH Digital Still Camera Mode Selecting the Built-in Memory (SC-D455/D457 only) ✤ ✤ Built-in memory setting is available in the Player/M.Cam/M.Player modes. (SC-D455: 32MB/SC-D457: 64MB) Images can be stored and played back using the built-in memory. Hence, set the memory type before storing and playing back images. 1. Set the Power switch to CAMERA or PLAYER. 4 M.Cam Mode √Memory Memory Type Photo Quality File No. 2. If the Power switch is set to CAMERA mode, set the Mode switch to MEMORY.
ENGLISH Digital Still Camera Mode Selecting the Image Quality ✤ ✤ Photo Quality function works in Player/M.Cam modes. You can select the quality of a still image to be recorded. Select the Image Quality 1. Set the Power switch to CAMERA. 2. Set the Mode switch to MEMORY. 3. Press the MENU button. ■ The menu list will appear. 4. Move the Menu selector to the left or right to select Memory, then press the Menu selector. 5.
ENGLISH Digital Still Camera Mode Using Quick Menu: Photo Quality ✤ ✤ Quick menu is used to access Camcorder functions by using the Menu selector. Quick menu provides easier access to frequently used menus without using the MENU button. 1. Press the Menu selector. 1 46 1min 2. Move the Menu selector to left or right to select Photo Quality, then press the Menu selector. Macro White Balance Photo Quality Exposure Manual Focus 3.
ENGLISH Digital Still Camera Mode Memory File Number ✤ ✤ ✤ File Number setting works only in M.Cam mode. File numbers are given to images in the order they were recorded when they are stored on the Memory Card. Memory file numbers may be set as follows: ■ Series: When there are existing files, the new image will be named as the next number in the sequence. ■ Reset: When there are no files stored on the Memory Card, the file numbering starts from 0001. 1. Set the Power switch to CAMERA. 4 2.
ENGLISH Digital Still Camera Mode Taking Photos ✤ You may take still images in M.Cam mode and store the images on the Memory Card. This function is useful when you want to take a snapshot of a subject while you are using the Camcorder. ✤ You can take photos using the remote control. (SC-D457 only) ✤ Audio will not be recorded with a Still image onto the Memory Card. 1 1. Set the Power switch to CAMERA. 2. Set the Mode switch to MEMORY. 3.
ENGLISH Digital Still Camera Mode Viewing Still Images ✤ This function works only in M.Player mode. You can playback and view still images recorded on the Memory Card. ✤ Be sure that the M.Play Select is set to Photo in the MENU. ✤ There are 3 ways to view recorded images. - Single Image: To view an image frame by frame. - Slide Show: To view all images automatically and in consecutive order. - Multi Display: To view 6 images at once. To view a Single Image 1. Set the Power switch to PLAYER. 2.
ENGLISH Digital Still Camera Mode To view the Multi Display 1. Set the Power switch to PLAYER. 2. Set the Mode switch to MEMORY. ■ The last recorded image appears. 100-0007 œœ √√ √ 3. To view six stored images on single screen, press the (MULTI) button. ■ A selection mark ( ) appears under the image. ■ Press (REV/FWD) button to select an image. / 4. To return to single Playback mode, press the (MULTI) button again. ■ The selected picture is displayed in full screen mode. 7/25 œ S.
ENGLISH Digital Still Camera Mode Protection from Accidental Erasure ✤ ✤ The Protection function works only in M.Player mode. You can protect important images from accidental erasure. If you execute format, all images including protected images will be erased. 1. Set the Power switch to PLAYER. 5 2. Set the Mode switch to MEMORY. ■ The last recorded image appears. ■ If there are no recorded images on the Memory Card, No image! will display on the screen. 3.
ENGLISH Digital Still Camera Mode Using Quick Menu: Protect ✤ ✤ Quick menu is used to access Camcorder functions by simply using the Menu selector. Quick menu provides easier access to the frequently used menus without using the MENU button. 1. Press the Menu selector. 1 2/46 800x600 2. Move the Menu selector to left or right to select Protect, then press the Menu selector. M.Play Select Delete Protect Print Mark 3.
ENGLISH Digital Still Camera Mode Deleting Still Images and Moving Images ✤ ✤ ✤ ✤ The Delete function works only in M.Player mode. You can erase the still images and moving images recorded on the Memory Card. If you want to delete protected images, you must first deactivate the image protection. (See page 96) An image which has been deleted cannot be recovered. 5 1. Set the Power switch to PLAYER. 2. Set the Mode switch to MEMORY. 3.
ENGLISH Digital Still Camera Mode Using Quick Menu: Delete ✤ ✤ Quick menu is used to access Camcorder functions by simply using the Menu selector. Quick menu provides easier access to the frequently used menus without using the MENU button. 1. Press the Menu selector. 1 2/46 800x600 2. Move the Menu selector to left or right to select Delete, then press the Menu selector. 3. Move the Menu selector to the left or right to select Cancel or Delete, then press the Menu selector. M.
ENGLISH Digital Still Camera Mode Formatting the Memory Card ✤ ✤ The Format function works only in M.Player mode. You can use the memory format functions to completely delete all images and options on the Memory Card, including protected images. ✤ The format function restores the Memory Card to its initial state. ✤ The Memory Card supplied with this Camcorder has been formatted already.
ENGLISH Digital Still Camera Mode MPEG Recording ✤ ✤ ✤ You can record video with audio on the Memory Card. The screen format of the video to be recorded is 720x480. The MPEG Recording function works only in M.Cam mode. Saving Moving Picture File onto a Memory Card 1. Check whether Memory Card is inserted into the Camcorder. If it is not in the Camcorder, insert it into the slot. 2. Set the Power switch to CAMERA. 3. Set the Mode switch to MEMORY. 4.
ENGLISH Digital Still Camera Mode MPEG Playback ✤ ✤ The MPEG Playback function works only in M. Player mode. You can play the moving picture images on the Memory Card. Stereo audio is played back at the same time. ✤ Playing back on a PC displays better quality than on a TV. 1. Set the Power switch to PLAYER. 2. Set the Mode switch to MEMORY. 3. Press the MENU button. ■ The menu list will appear. 4. Move the Menu selector to the left or right to select Memory, then press the Menu selector. 4 5.
ENGLISH Digital Still Camera Mode Using Quick Menu: M.Play Select ✤ ✤ Quick menu is used to access Camcorder functions by simply using the Menu selector. Quick menu provides easier access to the frequently used menus without using the MENU button. 1. Press the Menu selector. 1 2/46 800x600 2. Move the Menu selector to the left or right to select M.Play Select, then press the Menu selector. M.Play Select Delete Protect Print Mark 3.
ENGLISH Digital Still Camera Mode Recording an Image from a Cassette as a Still Image ✤ ✤ ✤ This function works only in Player mode. You can record still images from a cassette on a Memory Card. If you want to move recorded multiple still images from a cassette to a Memory Card, use the COPY function. 1 1. Set the Power switch to PLAYER. 2. Set the Mode switch to TAPE. 2 3. Play back the cassette. 4. Press the PHOTO button. ■ The still image is recorded on the Memory Card.
ENGLISH Digital Still Camera Mode Copying Still Images from a Cassette to Memory Card ✤ ✤ The Photo Copy function works only in Player mode. You can copy still images recorded with the photo function on a cassette onto a Memory Card. ✤ Rewind the tape to the point which you wants. 4 1. Set the Power switch to PLAYER. 2. Set the Mode switch to TAPE. Move 5 3. Press the MENU button. ■ The menu list will appear. 4. Move the Menu selector to the left or right to select Tape, then press the Menu selector.
ENGLISH Digital Still Camera Mode Copy to (Copies files From the Memory Card to the Built-in Memory) (SC-D455/D457 only) ✤ ✤ The Copy to function works only in M.Player mode. You can copy selected or all images stored in the Memory Card to the built-in memory. 1 1. Set the Power switch to PLAYER. 2. Set the Mode switch to MEMORY. 3. Press the MENU button. ■ The menu list will appear. 4 4. Move the Menu selector to the left or right to select Memory, then press the Menu selector. 5.
ENGLISH Digital Still Camera Mode Marking Images for Printing The Print Mark function works only in M.Player mode. This Camcorder supports the DPOF (Digital Print Order Format) print format. You can automatically print images recorded on a Memory Card with a printer supporting DPOF. There are 2 ways to make a Print Mark. - This File: You can set a print mark on the photo image displayed on the LCD screen. It can be set up to 999. - All Files: To print 1 copy each of all of the stored images. 5 M.
ENGLISH Digital Still Camera Mode Using Quick Menu: Print Mark ✤ ✤ Quick menu is used to access Camcorder functions by simply using the Menu selector. Quick menu provides easier access to the frequently used menus without using the MENU button. It can be set on the selected file only. 1. Press the Menu selector. 1 2/46 800x600 2. Move the Menu selector to left or right to select Print Mark, then press the Menu selector. 3.
ENGLISH PictBridge TM Printing Your Pictures – Using the PictBridgeTM ✤ ✤ PictBridgeTM function works only in M.Player mode. By connecting the Camcorder to printers with PictBridge support (sold separately), you can send images from the Memory Card directly to the printer with a few simple operations. ✤ With the PictBridge Support, you can control the printer directly through your Camcorder in order to print out stored pictures.
ENGLISH PictBridgeTM Setting the Date/Time Imprint Option 4. Move the Menu selector to the left or right to select Date/Time, then press the Menu selector. 5. Move the Menu selector to the left or right to select the Date/Time display type, then press the Menu selector. ■ Date/Time Display type: Off, Date, Time, Date&Time 5 M.
ENGLISH Maintenance After Finishing a Recording ✤ ✤ At the end of a recording you must remove the power source. When recording with a Lithium ion Battery pack, leaving the pack on the Camcorder can reduce the life span of the battery. The Battery pack should be removed after recording is completed. 1. Slide the TAPE EJECT switch in the direction of the arrow. ■ Opening the cassette door ejects the tape automatically. ■ Please wait until the tape is completely ejected. 1 2 2.
ENGLISH Maintenance Cleaning and Maintaining the Camcorder Cleaning the Video Heads To ensure normal recording and clear pictures, clean the video heads when the playback pictures display square block-shaped noise or distortion, or a blue screen appears. (blue screen) 1. 2. 3. 4. 5. Set the Power switch to PLAYER. Set the Mode switch to TAPE. Insert the cleaning tape. Press the (PLAY/STILL) button. Press the (STOP) button after 10 seconds.
ENGLISH Maintenance Using Your Camcorder Abroad ✤ ✤ Each country or region has its own electric and color systems. Before using your Camcorder abroad, check the following items. Power sources You can use your Camcorder in any country or area with the supplied AC Power adapter within 100V to 240V, 50/60 Hz. ■ Use a commercially available AC jack adapter, if necessary, depending on the design of the local wall outlet. ■ Color system You can view your recording in the Viewfinder.
ENGLISH Troubleshooting Troubleshooting ✤ Before contacting a Samsung authorized service center, perform the following simple checks. They may save you the time and expense of an unnecessary call. Self Diagnosis Display Display Blinking slow Informs that... Action the Battery pack is almost discharged. Change to a charged one. Tape end ! slow When the remaining time on the tape is about 2 minutes. Prepare a new one. Tape end ! no the tape reached its end. Change to a new one.
ENGLISH Troubleshooting Self Diagnosis Display in M.Cam/M.Player Modes Display Blinking Informs that... Action No Memory Card ! slow There is no Memory Card in the Camcorder. Insert a Memory Card. Memory Full ! slow There is not enough memory to record. Change to a new Memory Card. Erase recorded image. No image ! slow There are no images recorded on the Memory Card. Record new images. Write protect ! slow The Memory Card is record protected.
ENGLISH Troubleshooting ✤ If these instructions do not solve your problem, contact your nearest Samsung authorized service center. Symptom Explanation/Solution You cannot switch the Check the Battery pack or the AC Power adapter. Camcorder on. Start/Stop button does not operate while recording. The Camcorder shuts off automatically. Charge runs out quickly. When you see a blue screen during playback. Check that the Power switch is set to CAMERA. You have reached the end of the cassette.
ENGLISH Specifications Model Name: SC-D453/D455/D457 System Video signal Video recording system Audio recording system Usable cassette Tape speed Tape recording time FF/REW time Image device Lens Filter diameter LCD screen/Viewfinder Size/dot number LCD screen Method Viewfinder Connectors Video output S-Video output Audio output DV input/output USB output External mic NTSC 2 rotary heads, Helical scanning system Rotary heads, PCM system Digital video tape (6.35mm width): Mini DV cassette SP: approx. 18.
ENGLISH Index -A- -O- Accessories ................................................................................................12 AF/MF ....................................................................................................... 57 Audio dubbing ........................................................................................... 76 Audio Mode................................................................................................ 54 OSD .......................................
ENGLISH Warranty (SEA users only) SAMSUNG LIMITED WARRANTY SAMSUNG Electronics America Inc. (SEA), warrants that this product is free from defective material and workmanship. SEA further warrants that if product fails to operate properly within the specified warranty period and the failure is due to improper workmanship or defective material, SEA will repair or replace the product at it’s option. All warranty repairs must be performed by a SEA authorized service center.
ENGLISH THIS CAMCORDER IS MANUFACTURED BY: SERVICE DIVISION 400 Valley Road, Suite 201, Mt. Arlington N.J. 07856 Tel: 1-800-SAMSUNG (1-800-726-7864) *Samsung Electronics’ Internet Home Page http://www.samsung.