Upgrade guide Some disc is not supported by Rainbow chasis model.If your set does not support patticular disc, pls update your set using attached firmware.

1) Download the software update files from the Samsung Internet Site.

( GLOBAL DOWNLOAD CENTER at www.samsung.com )

2) After unzipping the "firmware.zip"file,BurnDisc(8cm DVD-RW) with the file (C710.bin)

using the NERO Burning program.

How to make an update disc

Firmware Update of a DVD CAM

Click "Add"

button to select

"C710.bin" file.

After selecting

"C710.bin" file.

click "Next"

button.

PAGE 1
- Firmware Update of a DVD CAM How to make an update disc 1) Download the software update files from the Samsung Internet Site. ( GLOBAL DOWNLOAD CENTER at www.samsung.com ) 2) After unzipping the "firmware.zip" file, Burn Disc(8cm DVD-RW) with the file (C710.bin) using the NERO Burning program. Click "Add" button to select "C710.bin" file. After selecting "C710.bin" file. click "Next" button.
PAGE 2
Change disc name as "TSST" and click "Option" button.
PAGE 3
Click "Burn" button
PAGE 4
PAGE 5
Update procedure - Warning – It is very important ; please read the notice below before updating your unit. The following events may interrupt the update process and MAY RESULT IN PERMANENT DAMAGE TO THE UNIT WHILE UPDATING. Ⅰ. Ⅱ. Ⅲ. Ⅳ. Ⅴ. Unplugging the power cord. Power Outage. Dirt or Scratches on the disc. Opening a disc tray during processing Changing from "camera mode" to "play mode" 1) Turn on the power switch.