Upgrade guide How to upgrade

Back-End Soft Upgrade Method

1. Run nero program.

Click on <Make Data DVD>

on nero.

2. Click on <Add> button.

3. Add the B-End program.

(File name : 0705_cne.Bin)

4. Change the file name with

‘RAINBOW.UPD’.

(The file name should be

changed into Capital letter.)

Click on <Next> button.

5. Click on <Bunning> button.

1/2

PAGE 1
Back-End Soft Upgrade Method 1. Run nero program. Click on on nero. 2. Click on button. 3. Add the B-End program. (File name : 0705_cne.Bin) 4. Change the file name with ‘RAINBOW.UPD’. (The file name should be changed into Capital letter.) Click on button. 5. Click on button.
PAGE 2
Back-End Soft Upgrade Method 1. Power On (Disc CAM E/E) ※Pls connect AC adapter, When you update. If you power off during update, Set will be out of order. 2. After eject, insert a Software Update disc and close the housing cover. 3. message will appear. 4. Move the [Joystick(5Way key)] left or right to select , then Press the [Joystick]. 5. And then, yellow bar shows the progress.
PAGE 3
6. When yellow bar progress until end point, DVD Cam power will be off and than on automatically. Screen is blue. 7. Power off (by removing power adapter) and then power on. The message will appear. Move the [Joystick] left or right to select , then press the [Joystick]. 8. When appear, eject and remove a disc. 9. In Cam E/E press the [LCD ENHANCER]and [Joystick] left side at the same time more than 3 seconds. 10. Check the program version which will display on LCD screen.