User's Manual
Table Of Contents
- key features of your HD camcorder
- safety warnings
- important safety instructions
- precautions
- important information on use
- precautions when using
- contents
- introduction to basic features
- getting to know your HD camcorder
- preparation
- before recording
- recording
- playback
- connection
- using the menu items
- editing movie images
- image management
- printing photo images
- connecting to a PC
- maintenance & additional information
- troubleshooting
- specifications
- warranty
English _31
recording
Basic procedures to record a movie or photo image are described below and on the following pages.
RECORDING MOVIE IMAGES
• You can record movie images in Movie mode only.
page 17
• This HD camcorder provides two Recording start/stop buttons. One is on
the rear side of the camcorder and the other is on the LCD panel. Select the
Recording start/stop
button that works best for you.
1. Turn the HD camcorder on.
• Connect a power source to the HD camcorder.
(A battery pack or an AC power adaptor)
pages 13,16
• Slide the POWER switch downward to turn the HD camcorder on.
• Set the appropriate storage media. (SC-HMX10A/HMX10C/HMX10CN/
HMX10ED only)
page 26
(If you want to record on a memory card, insert the memory card.)
2. Check the subject on the LCD screen.
• Set the Lens open/close switch to open (
).
page 8
3. Press the Recording start/stop button.
• The recording (
) indicator will display, and recording will start.
• To stop recording, press the Recording start/stop
button again.
4. When recording is finished, turn the HD camcorder off.
00:00:10 [44Min]
80
Min
00:00:10 [44Min]
80
Min