User's Manual

English _39
PLAYING MOVIE IMAGES
• This function works only in Play Mode.

page 17
• You can find a desired movie image quickly using thumbnail index views.
• You can also use the playback related buttons on the remote control.

page 40
1. Slide the POWER switch downward to turn on the power and press the MODE
button to set Play ( ).
• Set the appropriate storage media. (SC-HMX10A/HMX10C/HMX10CN/
HMX10ED only)

page 26
(If you want to play from a memory card, insert the memory card.)
2. Touch Movie ( ) tab.
• The thumbnail index view appears.
• To change the current thumbnail page, touch up ( ) or down ( ) tab.
3. Touch a desired movie image.
• The selected movie image is played according to Play Option setting.

page 64
• Drag your finger from left to right to select the previous image on the LCD
screen, reverse to select the next image.
• To stop playback and return to thumbnail index view, touch Return ( ) tab.
• The play related tabs disappear on the screen a few seconds after the
image plays back. They reappear when you touch any point on the
screen.
• Depending on the amount of data to be played back, it may take some
time for the playback images to appear.
• Movies edited on a PC may not be displayed on this HD camcorder.
• Movies recorded on another camcorder cannot be played on this HD
camcorder.
• The play is paused when you touch the menu ( ) tab during playing.
Adjusting the volume
• Touch Volume ( ) tab on the LCD screen.
- You can control the volume by using decrease ( ) or increase ( ) tab on
the LCD screen.
- The level can be adjusted anywhere between 00 and 19.
- You can do the same operation by using the remote control. (
/ )
• You can hear the recorded sound from the built-in speaker.
• If you close the LCD screen while playing, you will not hear the sound
from the speaker.
80
Min
100-0001
00:00:20 / 00:30:00
English _
39
80
Min
100-0001
00:00:20 / 00:30:00
10




1 / 2
80
Min