User Manual

ENGLISH
108 108
◆
[ ▲ /▼ ]
[ ▲ /▼ ]
✤
✤
Miscellaneous Information:
Connecting the CAM to other Devices
You can copy your recorded files to a regular blank video tape.
Connect the CAM to a VCR using the Audio/Video cable before
recording.
1. Insert a blank video tape and select
‘Line Input’ on the VCR.
2. Slide [Mode Selector] down to turn
on the CAM and slide it down again.
◆ The <Mode Selection> screen
appears.
3. Select <Play> in the Video mode to
find the desired video file with the
[ ▲ /▼ ] switch. (Refer to page 38)
4. Slide the [ ▲ /▼ ] switch to find the
video file you want to copy and
press the [OK] button.
5. Press the [Record/ Stop] button on
the VCR to start recording.
Notes
✤ Refer to operating instructions of your TV or VCR for detailed
information on connecting external devices.
✤ You can stop and play video files using the same button as used
for playing video files on the LCD monitor of the CAM.
(Refer to page 38).
Copying Video files to a VCR Tape
1 2 3 4 5
6 7 8 9 10
ALARM IN ALARM OUT ALARM RESET GND TRIGGER OUT
TAPE END OUT SERIES OUT GND SERIES IN 1 SHOT REC IN
1 2 3 4 5 6 7 8 9 10 1 2 3 4 5 6 7 8 9 10
IN
OUT
OUT
IN
Line Input
Line Output
Line Input