Manual

I ENGLISH]
Troubleshooting
+ Before contacting a service center, perform the following simple checks.
They may save you the time and expense of an unnecessary call.
thebatterypackis almost Changeto a charged
EC_ slow discharged one.
thebatterypackis fully Changetoa charged
EC_ fast discharged, battery.
thetape hasalmostreached Preparea new one.
TAPE slow itsend,
TAPEEND no thetape reacheditsend Changetoa newone.
TAPE slow thereisnotapeincamcorder. Inserta tape.
TAPE slow thetape is protected If youwantto record,
to record, releasethe protection.
1, Ejectthetape.
D,EMG 2. Setto OFF.
C.EMG slow thecamcorderhassome 3, Detachthebattery.
R.EMG mechanicalfault. 4.Reattachthebattery,
L.EMG * If repeatedcontact
localservice.
moisturecondensation
DEW slow has formedin thecamcorder, seebelow.
+ If the camcorder is brought directly from a cold place to a warm place, moisture may condense
inside the camcorder, on the surface of the tape, or on the lens. In this condition, the tape may
stick to the head drum and be damaged or the unit may not operate correctly.
To prevent possible damage under these circumstances, the camcorder is furnished with
moisture sensor.
+ If there is moisture inside the camcorder, "DEW" is displayed.
If this happens, none of the functions except cassette ejection will work.
Open the cassette compartment and remove the battery. Leave the camcorder
in a dry, warm room for at least two hours.
+ If the DEW protection is activated unexpectedly, see page 5.
,A