SCC-B2337(P) SCC-B2037P DIGITAL COLOR CAMERA user manual ENG FRE GER SPA ITA imagine the possibilities Thank you for purchasing this Samsung product. To receive more complete service, please register your product at www.samsungsecurity.
Safety information CAUTION RISK OF ELECTRIC SHOCK. DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE REAR COVER. NO USER SERVICEABLE PARTS INSIDE. REFER TO QUALIFIED SERVICE PERSONNEL.. 10. W e CAUT 1. D s 2. D 1 This symbol indicates high voltage is present inside. It is dangerous to make any kind of contact with any inside part of this product. 3. If o This symbol alerts you that important literature concerning operation and maintenance has been included with this product.
Safety information 10. When cleaning, do not spray water directly onto parts of the product. Doing so may cause fire or electric shock. CAUTION 1. Do not drop objects on the product or apply strong shock to it. Keep away from a location subject to excessive vibrationor magnetic interference. 2. Do not install in a location subject to high temperature (over 50°C), low temperature (below 10°C), or high humidity. Doing so may cause fire or electric shock. d of nce nce 4.
Important Safety Instructions 1. Read these instructions. 2. Keep these instructions. 3. Heed all warnings. 4. Follow all instructions. 5. Do not use this apparatus near water. 6. Clean only with dry cloth. 7. Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions. 8. Do not install near any heat sources such as radiators, heat registers, or other apparatus (including amplifiers) that produce heat. 9.
es wide sult Introduction Features PRODUCT & ACCESSORIES Part Names and Functions 6 7 8 Installation Connecting the Auto Iris Lens Connector Mounting the lens Connecting cables and checking operation 11 11 12 How to use OSD Menu Using Icons in the Menu Main Menu Profile Camera Setup Intelligence Privacy Zone Setup Other Set Communication System Information Language 13 13 14 16 22 24 25 26 26 26 Specifications Specifications 28 English – 5 ENG have y, or Contents
Introduction FEATURES ❖ High Resolution • This camera has realized high resolution of 600 lines using the top-notch full digital image processing and special algorithm technologies. ❖ Intelligent Motion Detection & Tracking • This is an intelligent function that automatically detects a motion of an object. You can set a virtual fence so it sounds an alert if an object passes / enters /exits the virtual fence or virtual area.
Introduction PRODUCT & ACCESSORIES and ❖ Product & Accessories • Main Product t e.
Introduction ❖R PART NAMES AND FUNCTIONS ❖ Side View Mount Adapter Fixing Grooves Auto Iris Lens Connector Camera Lens Auto Iris Lens Control Cable • Auto Iris Lens Connector This groove is used for screwing the mount adapter, a part of the bracket where the camera will be installed. • Auto Iris Lens Control Cable This cable transmits the power and signals from the camera for controlling the Auto Iris Lens.
Introduction ❖ Rear Panel n o p q r alled.
Introduction n Input/Output Connector This connector has input and output ports for RS-485 control signals, DAY/NIGHT switching, and alarm output signals. No. Function 1 ALARM OUT 2 GND Grounding Port. 3 GND Grounding Port. 4 SHUTTER (S0) 5 SHUTTER (S1) 6 SHUTTER (S2) Description Alarm out port for motion detection. (Open collector type) This is a port for selecting an external high speed shutter mode. If connected in LOW (0V), it will become ON inside.
e the CONNECTING THE AUTO IRIS LENS CONNECTOR MOUNTING THE LENS When using the CS lens Mount the CS lens by rotating it clockwise as shown in the picture: CS lens CS 렌즈 ENG he Installation Connect each uncovered shutter control cables to the Auto Iris Lens Connector as the following When using the C lens Pin No.
Installation CONNECTING CABLES AND CHECKING OPERATION ① Connect one end of the BNC cable to the VIDEO OUT Port on the rear of the camera. ② Connect another end of the BNC cable to the VIDEO IN Port on the monitor. USI ③ Finally connect the power adapter to the camera. You can connect 2 lines of the power adapter to the camera using the Slot Head screwdriver as shown in the picture. (GND: cable with the white stripe line) • E B sa • R • R • 1. ALA 2. GNDRAM OUT 3. GND 5. SHU 4. SHU 6.
wer How to use OSD Menu USING ICONS IN THE MENU • (EXIT) Exits the menu setting. Before you exits the menu setting, select SAVE to save your settings, or select QUIT to cancel. • (RET) Returns to the previous menu. • (HOME) MAIN MENU ÃÃMAIN MENUÃÃ PROFILE CAMERA SET INTELLIGENCE PRIVACY ZONE OTHER SET COMMUNICATION SYSTEM INFO LANGUAGE Returns to the main menu. • (SAVE) Used to save your settings of MASK AREA, PRIVACY ZONE and more.
How to use OSD Menu PROFILE ePROFILEf Pr M ÃSTANDARD ITS BACKLIGHT DAY/NIGHT GAMING CUSTOM W In the PROFILE menu, you can configure the following camera settings at once. CAMERA SET Menu Previous Menu Sub-menus IRIS ALC LENS LEVEL STANDARD ITS BACKLIGHT DAY/NIGHT GAMING ALC ALC ALC ALC ALC - - - - - DC DC DC DC DC 0 0 0 0 0 OFF OFF BLC OFF OFF MOTION (F.FAST)--- (F.FAST)--- NORM (F.
How to use OSD Menu CAMERA SET Menu Previous Menu STANDARD ITS BACKLIGHT DAY/NIGHT GAMING DAY DAY/NIGHT DAY DAY/NIGHT DAY - - - - - ATW2 ATW1 ATW1 ATW1 ATW1 RED 0 0 0 0 0 BLUE 0 0 0 0 0 Sub-menus WHITE BAL DAY MODE NIGHT BRIGHTNESS MODE - - - - MID User setting allowed MID User setting allowed OFF ATW2 OFF ATW2 OFF RED User setting allowed 0 User setting allowed 0 User setting allowed BLUE User setting allowed 0 User setting allowed 0 User setting
How to use OSD Menu ❖ CAMERA ID CAMERA SETUP eCAMERA SETf ABCDEFGHIJKLMNOPQRSTUVWXYZ0 123456789 :?-+*()/ CAMERA ID OFF IRIS ALC MOTION (F.FAST)--DNR MID SHUTTER OFF SENS-UP AUTO X4 FLICKERLESS (OFF)--XDR MID d c DAY/NIGHT AUTO WHITE BAL DIGITAL ZOOM OFF DETAIL [2] V-SYNC INT AGC COLOR SUP LOW REVERSE OFF POSI/NEGA + PIP OFF d SPffeeSP LOCATION CAMERA-1.................. ........................... The CAMERA ID menu is used for you to assign a unique name to a camera.
How to use OSD Menu The LEVEL menu is used to adjust the overall brightness, where “+” will increase the brightness and “–” will decrease it. ② If you set the BACKLIGHT option to BLC, you will see a menu where you can set the BLC area. you can set the desired BLC zone by defining the size and location.
How to use OSD Menu ❖ SHUTTER AGC FIX LEVEL [OFF, AUTO 1/100(PAL:1/120), AUTO 1/250, AUTO 1/500, AUTO 1/1000, AUTO 1/2000, AUTO 1/4000, AUTO 1/10K , 1/100(PAL:1/120), 1/250, 1/500, 1/1000, 1/2000, 1/4000, 1/10K , EXT] [01] If you press the SETUP switch with a FIX sub menu selected, you will see the appropriate screen. As a fixed value of the AGC gain is used in FIX mode, you can select one of the 16 detailed levels from VERY LOW to VERY HIGH before fixing it.
UTO 0, d /120) r, ect. es ast e LC will er FF h d R(S2) F F F 1/2000 ON OFF ON 1/4000 OFF ON ON 1/10K ON ON ON Note : – If IRIS mode is set to ELC, the SHUTTER menu will be deactivated as you adjust the brightness using the electronic shutter. – If the SENS-UP function is set to AUTO, only items of OFF and AUTO are available in the SHUTTER menu. – If the SENS-UP mode is set to FIX, the SHUTTER menu will be deactivated.
How to use OSD Menu • AUTO • NI MASK AREA The camera will automatically switch between DAY and NIGHT mode, according to the lighting condition. If you press the SETUP switch with an AUTObased sub menu selected, you will see the appropriate screen. AUTO BURST DAYÆNIGHT BRIGHTNESS DWELL TIME NIGHTÆDAY BRIGHTNESS DWELL TIME MASK AREA OFF MID 2S 1 MID 5S 2 You can specify Mask 1 and 2 simultaneously.
How to use OSD Menu • NIGHT r will will he f d in n WHITE BAL DAY/NIGHT BRIGHTNESS MODE RED BLUE R-GAIN B-GAIN NIGHT MID AWC [00]----I---[00]----I---[0248] [0247] Note : – You can set the values of R-GAIN and B-GAIN only in AWC mode. – If AGC is set to OFF or FIX, you can not access the NIGHT menu.
How to use OSD Menu ❖ V-SYNC [INT, LINE] INTELLIGENCE Select the vertical sync mode for INT or LINE. If you select INT, the camera will use the internal synchronization. If selecting LINE, the camera will use the external power source frequency for the synchronization. You can adjust the LL-PHASE. Note : – Use of DC 12V will fix V-SYNC to INT, which can not be changed. ❖ AGC COLOR SUP [LOW , MID, HIGH] Adjust the color scheme according to the AGC value.
the ION] How to use OSD Menu - How to set the area FENCE LINE AREA OFF OFF You can set the position and detection direction of the LINE, and the size and position of the AREA. - How to set the line LINE PIXEL LEVEL DIRECTION §¨ n he cted mes e r line TER” he ① If you press the SETUP switch with the LINE option set to ON, you can specify the position and detection direction of the line.
How to use OSD Menu ❖ MASK AREA [1~4] Specify a detection exception area to mask. Select a mask number and specify the size and position. MASK AREA 2 8 3 9 4 10 PRIVACY SET STYLE 5 11 ❖ DISPLAY [ON, OFF] With the DISPLAY option set to ON, a motion or a set ADVANCED function will be displayed on the screen, if detected. ❖ SENSITIVITY The PRIVACY function will protect your privacy by screening the privacy area that you have specified during monitoring.
y cy CY ① If you press the SETUP switch in , you will see the points available in the PRIVACY ZONE. Each time you press the SETUP switch, the points available will move. ② Use the cdef switch to set the position of each point. Set each position of the four points and press the SETUP switch to complete the positioning. - How to set the position You can move the position of the overall area. ① By pressing the SETUP switch in , you can move the overall position of the privacy zone.
How to use OSD Menu eCOMMUNICATIONf RS-485 PROTOCOL BAUD RATE ADDRESS ❖ In SYSTEM INFORMATION COMMUNICATION eSYSTEM INFOf SAMSUNG 9600 0 The COMMUNICATION menu is used to configure the settings regarding RS-485 communications. Use the rear panel of the camera to connect to RS-485. TYPE 3_BOX_EXV_P PROTOCOL SAMSUNG ADDRESS 1 COMM. TYPE RS-485,HALF BAUD RATE 9600 SERIAL NO. 000000000000000 CAMERA VER. 0.50_090101 EEPROM VER. 0.
he mera How to use OSD Menu ❖ Initial Configuration Table • Camera Configuration CAMERA ID OFF IRIS ALC AGC VERY HIGH MOTION DNR (F.
Specifications SPECIFICATIONS Items Sub-items SCC-B2337N Camera Type CCTV Camera (DAY/NIGHT) Device Image Pixels 1/3” Exview-HAD IT CCD Total 811 x 508 Effective 768 x 494 System Interlace Scanning Line 525 lines Frame Scanning 30frame/1sec Horizontal Frequency Vertical Frequency Min. Scene Illumination Internal Mode 15,734 Hz Line-lock Mode 15,750 Hz Internal Mode 59.94 Hz Line-lock Mode Sens-up OFF OFF OFF 512 times 512 times 512 times Condition F No. 1.2 1.2 1.2 1.2 1.2 1.
Specifications Items Sub-items SCC-B2337N Horizontal 600 TV Lines Vertical 350 TV Lines Video Output - VBS 1.0Vp-p, 75 Ω S/N Ratio S/N Ratio Approx. 52dB Lens Drive Type MANUAL/AI(VIDEO/DC) Mount Type CS/C Resolution Lens Alarm Input N/A Output 1 Output Coaxitron (Data On Coax cable) Yes (with SCX-RD100) RS-485 Yes (Multi Protocol, 8ea) Environmental Conditions Operating Temperature -10˚C ~ +50˚C Humidity Less than 90% Power Requirement AC24V ± 10%(60Hz ± 0.
Specifications Items Sub-items SCC-B2337P / SCC-B2037P Camera Type CCTV Camera (DAY/NIGHT) Device Image Pixels 1/3” Exview-HAD IT CCD Total 795 x 596 Effective 752 x 582 System Interlace Scanning Line 625 lines Frame Scanning 25frame/1sec Horizontal Frequency Vertical Frequency Min. Scene Illumination Internal Mode 15,625 Hz Line-lock Mode 15,625 Hz Internal Mode 50 Hz Line-lock Mode Sens-up OFF OFF OFF 512 times 512 times 512 times Condition F No. 1.2 1.2 1.2 1.2 1.2 1.
Specifications Items Sub-items Video Output - S/N Ratio Lens SCC-B2337P / SCC-B2037P VBS 1.0Vp-p, 75 Ω S/N Ratio Approx. 52dB Lens Drive Type MANUAL/AI(VIDEO/DC) Mount Type CS/C Alarm Input N/A Output 1 Output Coaxitron (Data On Coax cable) Yes (with SCX-RD100) RS-485 Yes (Multi Protocol, 8ea) Environmental Conditions Operating Temperature -10˚C ~ +50˚C Humidity Less than 90% Power Requirement SCC-B2337P : AC24V ± 10%(50Hz±0.3Hz) DC12V ± 10% SCC-B2037P : AC220V ± 10%(50Hz±0.
Correct Disposal of This Product (Waste Electrical & Electronic Equipment) (Applicable in the European Union and other European countries with separate collection systems) This marking on the product, accessories or literature indicates that the product and its electronic accessories (e.g. charger, headset, USB cable) should not be disposed of with other household waste at the end of their working life.