SCC-B2331(P) SCC-B2031P DIGITAL COLOR CAMERA user manual ENG FRC SPA-M JAP POR-B imagine the possibilities Thank you for purchasing this Samsung product. To receive more complete service, please register your product at www.samsungsecurity.
Safety information CAUT CAUTION RISK OF ELECTRIC SHOCK. DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK) NO USER SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. This symbol indicates that dangerous voltage consisting a risk of electric shock is present within this unit. 1. D e 2. D h 3. If it 4. R d 5.
Safety information CAUTION 1. Do not drop objects on the product or apply strong blows to it. Keep away from a location subject to excessive vibration or magnetic interference. 2. Do not install in a location subject to high temperature (over 140°F), low temperature (below -14°F), or high humidity. Doing so may cause fire or electric shock. RTS 3. If you want to relocate the already installed product, be sure to turn off the power and then move or reinstall it. 4.
Important Safety Instructions WARNING 1. Read these instructions. 2. Keep these instructions. 3. Heed all warnings. 4. Follow all instructions. 5. Do not use this apparatus near water. 6. Clean only with dry cloth. 7. Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions. 8. Do not install near any heat sources such as radiators, heat registers, or other apparatus (including amplifiers) that produce heat. 9.
Contents Introduction Features PRODUCT & ACCESSORIES Part Names and Functions 6 7 8 Installation Connecting the Auto Iris Lens Connector Mounting the lens Connecting cables and checking operation 11 11 12 How to use OSD Menu es wide sult and 13 13 14 16 22 23 24 25 25 Specifications have y, or Specifications 26 th English – 5 ENG Using Icons in the Menu Main Menu Profile Camera Setup Intelligence Privacy zone Setup Other Set System Information Language
Introduction FEATURES ❖ High Resolution • This camera has realized high resolution of 600 lines using the top-notch full digital image processing and special algorithm technologies. ❖ Intelligent Motion Detection & Tracking • This is an intelligent function that automatically detects a motion of an object. You can set a virtual fence so it sounds an alert if an object passes / enters /exits the virtual fence or virtual area.
Introduction and ❖ Product & Accessories • Main Product t e.
Introduction ❖R PART NAMES AND FUNCTIONS ❖ Side View Mount Adapter Fixing Grooves Auto Iris Lens Connector Camera Lens Auto Iris Lens Control Cable • Auto Iris Lens Connector This groove is used for screwing the mount adapter, a part of the bracket where the camera will be installed. • Auto Iris Lens Control Cable This cable transmits the power and signals from the camera for controlling the Auto Iris Lens.
Introduction ❖ Rear Panel n o p q r alled.
Introduction n Input/Output Connector CO CO This connector has input and output ports for, DAY/NIGHT switching, and alarm output signals. No. Function 1 ALARM OUT 2 GND 3 TRIGGER IN 4 SHUTTER (S0) 5 SHUTTER (S1) 6 SHUTTER (S2) 7 5V OUT Description Alarm out port for motion detection. (Open collector type) Grounding Port. Displays the current still image when it receives the Trigger signal. (Normal Open Type) This is a port for selecting an external high speed shutter mode.
Installation CONNECTING THE AUTO IRIS LENS CONNECTOR MOUNTING THE LENS When using the CS lens Mount the CS lens by rotating it clockwise as shown in the picture: CS lens CS 렌즈 ENG Connect each uncovered shutter control cables to the Auto Iris Lens Connector as the following When using the C lens Pin No.
Installation CONNECTING CABLES AND CHECKING OPERATION ① Connect one end of the BNC cable to the VIDEO OUT Port on the rear of the camera. ② Connect another end of the BNC cable to the VIDEO IN Port on the monitor. USI ③ Finally connect the power adapter to the camera. You can connect 2 lines of the power adapter to the camera using the Slot Head screwdriver as shown in the picture. (GND: cable with the white stripe line) • E B sa • R • R • 1. ALA 2. GNDRAM 3. TRIG OUT 5. SHU 4. SHU GER TTER IN 6.
How to use OSD Menu USING ICONS IN THE MENU wer • (EXIT) Exits the menu setting. Before you exits the menu setting, select SAVE to save your settings, or select QUIT to cancel. • (RET) Returns to the previous menu. • (HOME) MAIN MENU ÃÃMAIN MENUÃÃ PROFILE CAMERA SET INTELLIGENCE PRIVACY ZONE OTHER SET SYSTEM INFO LANGUAGE Returns to the main menu. • (SAVE) Used to save your settings of MASK AREA, PRIVACY ZONE and more.
How to use OSD Menu PROFILE ePROFILEf Pr M ÃSTANDARD ITS BACKLIGHT DAY/NIGHT GAMING CUSTOM In the PROFILE menu, you can configure the following camera settings at once.
How to use OSD Menu CAMERA SET Menu Previous Menu Sub-menus MODE ITS BACKLIGHT DAY/NIGHT GAMING ATW1 ATW2 ATW1 ATW1 ATW1 RED 0 0 0 0 0 BLUE 0 0 0 0 0 NIGHT BRIGHTNESS MODE DETAIL STANDARD - - - - - User setting allowed MID User setting allowed MID User setting allowed OFF ATW2 OFF ATW2 OFF RED User setting allowed 0 User setting allowed 0 User setting allowed BLUE User setting allowed 0 User setting allowed 0 User setting allowed 2 2 2 2 2 ENG g g ❖
How to use OSD Menu ❖ CAMERA ID CAMERA SETUP [OFF, ON] CAMERA ID eCAMERA SETf CAMERA ID OFF IRIS ALC MOTION (F.FAST)--DNR MID SHUTTER OFF SENS-UP AUTO X4 FLICKERLESS (OFF)--XDR MID ABCDEFGHIJKLMNOPQRSTUVWXYZ0 123456789 :?-+*()/ ② SPffeeSP LOCATION CAMERA-1.................. ...........................
How to use OSD Menu The LEVEL menu is used to adjust the overall brightness, where “+” will increase the brightness and “–” will decrease it. ② If you set the BACKLIGHT option to BLC, you will see a menu where you can set the BLC area. you can set the desired BLC zone by defining the size and location. ct If you use an ordinary camera in a scene with an intensive backlight, the object will be displayed dark on the monitor affected by the backlight.
How to use OSD Menu [OFF, AUTO 1/100(PAL:1/120), AUTO 1/250, AUTO 1/500, AUTO 1/1000, AUTO 1/2000, AUTO 1/4000, AUTO 1/10K , 1/100(PAL:1/120), 1/250, 1/500, 1/1000, 1/2000, 1/4000, 1/10K , EXT] AGC FIX LEVEL [01] If you press the SETUP switch with a FIX sub menu selected, you will see the appropriate screen. As a fixed value of the AGC gain is used in FIX mode, you can select one of the 16 detailed levels from VERY LOW to VERY HIGH before fixing it.
How to use OSD Menu UTO 0, d /120) r, ect. es ast e LC will er 1/10K OFF ON ON ON ON ON Note : – If IRIS mode is set to ELC, the SHUTTER menu will be deactivated as you adjust the brightness using the electronic shutter. – If the SENS-UP function is set to AUTO, only items of OFF and AUTO are available in the SHUTTER menu. – If the FLICKERLESS function is set to ON, the SHUTTER menu will be deactivated.
How to use OSD Menu You can select from LOW, MID and HIGH for the brightness of DAYÆNIGHT, which is a brightness level in switching from the color filter to Black-and-White. Closing to LOW from HIGH will switch the filter in a low contrast scene. The DWELL TIME of DAYÆNIGHT is a time required to determine the need for switching the filter. You can select from LOW, MID and HIGH for the brightness of NIGHTÆDAY, which is a brightness level in switching from the Black-andWhite filter to color.
How to use OSD Menu d in – If AGC is set to OFF or FIX, you can not access the NIGHT menu. – For adjusting the white balance, the following 5 modes are provided: n • ATW1(Auto Tracing White Balance mode 1): The camera can automatically adjust the color temperature in real time, according to the ambient conditions. The color temperature ranges from approx. 2500K to 9300K. Note : – If the digital zoom factor is set to larger than 1x, the FENCE function will be deactivated.
How to use OSD Menu image on the same screen using the Picture In Picture function. Note : – If more than one privacy zone is set and the PRIVACY SET is set to ON, the PIP function will be deactivated. – If the INTELLIGENCE function is set to FENCE mode, the PIP menu will be deactivated. ❖ DIS [OFF, ON] S INTELLIGENCE ❖R eINTELLIGENCEf MOTION MASK AREA DISPLAY SENSITIVITY RESOLUTION ALARM OUT 1 OFF 2 3 4 ON [4] [5] Digital Image Stabilization will set the anti-shake compensation.
How to use OSD Menu Set the sensitivity of the motion detection. ❖ RESOLUTION PRIVACY ZONE SETUP [1~5] ePRIVACY ZONEf If setting it to high, the camera can detect even a trivial movement of the target. 2 8 3 9 4 10 PRIVACY SET STYLE ❖ ALARM OUT If you set a desired menu item to ON, the camera will sound an alert if it detect the appropriate motion.
How to use OSD Menu OTHER SET PRIVACY ZONE SET1 PIXEL LEVEL [4] SY eOTHER SETf EXTERNAL TRG FACTORY DEFAULTS OSD COLOR OFF BW - How to set the point You can set each position of the 4 points. ① If you press the SETUP switch in , you will see the points available in the PRIVACY ZONE. Each time you press the SETUP switch, the points available will move. ② Use the cdef switch to set the position of each point.
How to use OSD Menu SYSTEM INFORMATION ❖ Initial Configuration Table eSYSTEM INFOf • Camera Configuration TYPE 3_BOX_NOR_N SERIAL NO. 000000000000000 CAMERA VER. 0.50_090101 CAMERA ID OFF IRIS ALC AGC VERY HIGH MOTION ess You can view the system information including, camera version DNR (F.
Specifications SPECIFICATIONS Items Sub-items SCC-B2331N Camera Type CCTV Camera (WDR & DAY/NIGHT) Device Image 1/3” Super-HAD IT CCD Total Pixels 811 x 508 Effective 768 x 494 System Scanning Min. Scene Illumination Functions Interlace/Progressive Scanning Line 525 lines Frame 30frame/1sec Horizontal Frequency Internal Mode 15,734 Hz Line-lock Mode 15,750 Hz Vertical Frequency Line-lock Mode Internal Mode Sens-up OFF OFF OFF 512 times 512 times 512 times Condition F No. 1.2 1.
Specifications Items Sub-items SCC-B2331N Horizontal 600 TV Lines Vertical 350 TV Lines Video Output - VBS 1.0Vp-p, 75 Ω S/N Ratio S/N Ratio Approx. 52dB Lens Drive Type MANUAL/AI(VIDEO/DC) Resolution Lens Mount Type Alarm CS/C Input N/A Output 1 Output Remote Control Coaxitron (Data On Coax cable) Yes (with SCX-RD100) RS-485 Yes (Multi Protocol, 8ea) Environmental Conditions Operating Temperature Less than 90% Power Requirement AC24V ± 10%(60Hz ± 0.
Specifications Items Sub-items SCC-B2331P / SCC-B2031P Camera Type CCTV Camera (WDR & DAY/NIGHT) Device Image 1/3” Super-HAD IT CCD Total Pixels 795 x 596 Effective 752 x 582 System Scanning Interlace/Progressive Scanning Line 625 lines Frame 25frame/1sec Horizontal Frequency Vertical Frequency Min. Scene Illumination Internal Mode 15,625 Hz Line-lock Mode 15,625 Hz Internal Mode 50 Hz Line-lock Mode Sens-up OFF OFF OFF 512 times 512 times 512 times Condition F No. 1.2 1.2 1.2 1.
Specifications Items Sub-items SCC-B2331P / SCC-B2031P Video Output - VBS 1.0Vp-p, 75 Ω S/N Ratio S/N Ratio Approx. 52dB Lens Drive Type MANUAL/AI(VIDEO/DC) Mount Type CS/C Lens Input N/A Output 1 Output Coaxitron (Data On Coax cable) Yes (with SCX-RD100) Alarm Remote Control Environmental Conditions Power Operating Temperature -10˚C ~ +50˚C Humidity Less than 90% Power Requirement SCC-B2331P : AC24V ± 10%(50Hz±0.3Hz) DC12V ± 10% SCC-B2031P : AC220V ± 10%(50Hz±0.