Service manual

Troubleshooting
Samsung Electronics 4-11
NOTIFY TONER LOW
With this feature enabled, when the toner becomes low, the toner low information will be sent to a specified
contact point, for example, the service company. After you access this menu, select ON, and when the LCD-
prompts, enter the name and the number of the contact point, the customer's fax number, the model name,
and the serial number.”
PROGRAM DIAL
This is a special feature which allows the TECH USER to set parameters for a specific dialed location (which
must be in the one touch or speed dial phone books). Parameters can be set to override the normal; default
settings to enable the machine to cope with calls to destinations with known line problems”
4-4-6 REPORT/HELP
MSG. CONFIRM
It shows the result of the last send operation.
PROTOCOL LIST
This list shows the sequence of the CCITT group 3 T.30 protocol during the most recent sending or receiving
operation. Use this list to check for send and receive errors. If a communication error occurs while the
machine is in TECH mode, the protocol list will print automatically.
HELP
It shows a brief description on the machine's basic functions and commands.
Use it as a quick reference guide
S NSF 61005820003380140200001302090018010000
S/R FCF FIF DATA! ASCII
S CSI 2020202020202020202020202O20202020202020
S CSI 202020202020202020202022O202020220202020
R TSI 2020202020202020202020202O20202020202020
S DIS 00000000 01110111 00010111 00100010
S DIS 00000000 01110111 00010111 00100010
R DCS 00000000 01100001 00010101 00000000
R TSI 2020202020202020202020202O20202020202020
R DCS 00000000 01100001 00010101 00000000
S CFR
R MPS
S MCF
S DCN
S FTT
S NSF 61005020003380140200001302090018010000
PROTOCOL DUMP LIST NOV-20-2001
Sending/Receiving
Name of signal
(Facsimile Control Field)
Facsimile Information Field
data described in hexdecmal code
FIF data described
in ASCII code