Service manual

Disassembly and Reassembly
3-2
Samsung Electronics
3-3 Scanner Ass'y
1. Before you remove the Scanner Ass'y, you
should remove:
- Rear Cover (see page 3-1)
2. Take out the Shield Main Upper.Unplug the one
connector and CCD cable.
Notice :
To avoid damage to the CCD cable connector ensure that
you pull the cable out carefully. Pull in line with the con-
nector not at an angle.
3. Remove the three screws, as shown below.
4. Open the Side Cover assembly first to open the
Front cover. In the other words, close the front
cover first to assembly it.
5. Remove two screws.
Side Cover Ass’y
Front Cover
1
2