Power Zoom Camera User Manual Z-2430P(D)-3430P(D)-ENG.
overview CAUTION RISK OF ELECTRIC SHOCK. DO NOT OPEN CAUTION: T O REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK) NO USER SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. This symbol indicates that dangerous voltage consisting a risk of electric shock is present within this unit. This symbol indicates that there are important operating and maintenance instructions in the literature accompanying this unit.
6. Do not place conductive objects (e.g. screwdrivers, coins, metal parts, etc.) or containers filled with water on top of the camera. Doing so may cause personal injury due to fire, electric shock, or falling objects. 8. If any unusual smells or smoke come from the unit, stop using the product. In such case, immediately disconnect the power source and contact the service center. Continued use in such a condition may cause fire or electric shock. English 7.
overview FCC Statement This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions : 1) This device may not cause harmful interference, and 2) This device must accept any interference received including interference that may cause undesired operation. Caution This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of FCC Rules.
English important safety instructions 1. Read these instructions. 2. Keep these instructions. 3. Heed all warnings. 4. Follow all instructions. 5. Do not use this apparatus near water. 6. Clean only with dry cloth. 7. Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions. 8. Do not install near any heat sources such as radiators, heat registers, or other apparatus (including amplifiers) that produce heat. 9.
overview contents overview 5 6 7 8 8 Important Safety Instructions Contents Features What’s Included At a Glance installation & connection 12 12 Preparing Installation Connecting the Cables setup 15 16 18 27 29 30 31 32 32 Main Menu Profile Camera Set Intelligent Video Privacy Zone Preset Other Set Communication System Info appendix 33 34 Shortcut Keys Specifications 2 12 15 33 _ overview Z-2430P(D)-3430P(D)-ENG.
With the state-of-the-art digital signal processing technology, full digital image processing and special algorithm of 600-line high resolution implemented. High Sensitivity: It implements images of high sensitivity using the up-to-date Super-HAD IT CCD(SCZ-2430P/SCZ-2430N/SCZ-2430PD/SCZ-2430ND)/ExViewHAD PS CCD(SCZ-3430P/SCZ-3430N/SCZ-3430PD/SCZ-3430ND). VPS(Virtual Progressive Scan): This is an advanced technology that reproduces a sharp progressive image.
overview What’s Included Please check if your camera and accessories are all included in the product package. Camera Camera Holder (Mount Adaptor) 2 Screws User's Manual At a Glance SIDE VIEW Mount Adapter Fixing Grooves Camera Lens M Wipe out a dirty surface of the lens softly with a lens tissue or cloth to which you have applied ethanol. _ overview Z-2430P(D)-3430P(D)-ENG.
� � � � [Z\Z � SCZ-2430P/2430N English Rear Panel � [Y\\ SCZ-3430P/3430N [Z\\ � � � � � � � � � � � � � � � � � � [Z\Z SCZ-2430PD/2430ND [Y\Z SCZ-3430PD/3430ND [Y\\ � � � � � � � � � � � � � � � � Input/Output Connector � � [Y\\V[Z\\ [Y\Z This connector has input and output ports for RS-485 control signals, DAY/NIGHT switching, and alarm output signals. [Y\\V[Z\\ [Y\ZV[Z\Z [Y\ZV[Z\Z SCZ-3430P/SCZ-3430N SCZ-3430PD/SCZ-3430ND Z-2430P(D)-3430P(D)-ENG.
overview 1. ALARM OUT Alarm out jack for motion detection. (Open Collector, On Gnd) 2. GND Grounding jack. 3. TRIGGER IN (SCZ-3430P/SCZ-3430N, SCZ-3430PD/SCZ-3430ND) Displays the current still image when it receives the Trigger signal. (Normal Open Type) 4.5.6 FOCUS, COM, ZOOM This port is used for ZOOM/FOCUS, MENU CONTROL, HOME RETURN, and ONEAF by using an external controller. Depending on the input condition, 4 modes, A, B, C, and D are available.
English * 2 : For short voltage supply during MENU OFF, executes ONEAF and for more than 2 second * 3 : For more than 2 second long voltage supply, moves to the PRESET 0(HOME) position. 7. 5V OUT Power supply jack for RS-485 JIG. Use within typical DC +5V 100mA. 8. DAY/NIGHT IN This is a function to receive the external DAY/NIGHT signal from the sensor(option) and convert the signal into BW. 9. RS-485 DATAJack for connection to RS-485 DATA- signal line. 10.
installation & connection Preparing Installation To install and use the camera, first prepare the following cables.
English Video In Terminal of Monitor Rear Surface BNC cable(not included) Video Out Terminal 3. Plug in the power adapter(not inlcluded). Use a “minus” screwdriver to connect one part of the power adapter, which consists of two lines, to the POWER terminal of the camera as follows : Z-2430P(D)-3430P(D)-ENG.indd 13 1. ALA 2. GNDRAM 3. TRIG OUT 5. COM 4. FOC GER US IN 6. ZOO 7. 5V M 8.
installation & connection 4. Determine the type of power supply and set the POWER SELECTION switch accordingly. Next, plug the power adapter into a wall outlet. 5. If the camera operates normally, the following screen will be displayed for 5 seconds and then disappears. TYPE PROTOCOL ADDRESS COMM.TYPE BAUD RATE CAMERA VER. LENS 4_43ZOM_WDR_N SAMSUNG-E 0 RS485,HALF 9600 V2.00_100000 OK 6.
setup Using OSD icons (EXIT): Exits the menu setup screen. Before exiting the setup screen, select to save your settings to the whole menus, or to cancel them. (RET): Saves your settings and returns to the previous screen. (HOME): Returns to the main menu. (SAVE): Use this icon if you want to save your settings after you specified the mask area and privacy area, etc. Once you saved your settings, the changes remain intact even if you select on exit.
setup COMMUNICATION Configures the settings pertaining to RS-485 communication. SYSTEM INFO Shows the system information such as the camera version or communication settings. PROFILE You can select one from the pre-determined configurations as appropriate to your specific camera installation environment. Your selection on each item in PROFILE will affect all other settings of the camera. STANDARD Automatically optimizes the camera settings to the normal environment.
CAMERA SETUP MENU Parent Menu Sub-menus ALC LEVEL IRIS BACKLIGHT WDR ITS BACKLIGHT DAY/NIGHT GAMING OFF ON OFF OFF OFF ALC ALC ALC ALC ALC - - - - - 0 0 0 0 0 OFF OFF WDR OFF OFF - - - - - WEIGHT Custom Setting Custom Setting MEDIUM Custom Setting Custom Setting WDR LEVEL Custom Setting Custom Setting 0 Custom Setting Custom Setting WHITE BAL Custom Setting Custom Setting Indoor Custom Setting Custom Setting MOTION (F.FAST) --- (F.FAST) --- NORM (F.
setup CAMERA SET You can configure the general settings of the camera module. 1. Select - . The Camera Setup menu appears. 2. Change the settings as necessary, or select an item to check. CAMERA SET CAMERA ID OFF VPS OFF IRIS ALC MOTION (F.FAST) --DNR MID SHUTTER (OFF) --SENS-UP AUTO X4 FLICKERLESS OFF XDR MID CAMERA ID Provide the ID and location for a camera that displays on the screen. 1. Select - . 2.
IRIS ALC : Adjust the open and close of the iris. - LEVEL : Select an overall brightness level. - BLC : With set to , you can specify the BLC area. With AREA set to , you can specify the position and size. LEVEL BACKLIGHT AREA [ 00] ----I---BLC USER English The IRIS menu is useful if you set to adjust the intensity of radiation incoming to the camera.
setup AGC With this, you can adjust the AGC level of a CAMERA SET camera. CAMERA ID OFF With AGC active, if the signal strength falls VPS OFF below the standard level, AGC will amplify the IRIS ALC AGC (VERY HIGH) --video signal to automatically improve the DNR MID sensitivity. SHUTTER OFF If is set to or SENS-UP OFF mode, the menu will switch to FLICKERLESS OFF XDR MID . With the USER ( ) submenu selected, press [ENTER] to display the corresponding screen.
SHUTTER As long as SENSE UP is set to AUTO, FIXED / FLICKERLESS to ON / BACKLIGHT to WDR, the SHUTTER menu is not available. CAMERA SET CAMERA ID OFF VPS OFF IRIS ALC AGC (VERY HIGH) --DNR MID SHUTTER 1/100 SENS-UP (OFF) --FLICKERLESS (OFF) --XDR MID English You can select a fixed fast electronic shutter speed in 7 options ranging from 1/100(NTSC) or 1/120(PAL) to 1/10k, which is mostly used to take a picture of a fast moving object.
setup DAY/NIGHT You can specify a recording mode according to the scene. 1. Select - . DAY/NIGHT WHITE BAL FOCUS MODE ZOOM SPEED DISPLAY ZOOM DIGITAL ZOOM DETAIL V-SYNC AGC COLOR SUP AUTO ONEAF [2] 2. Select a screen transition mode according OFF to the illumination, and set options as OFF appropriate. [2] (INT)-- DAY : Fixed to DAY mode, regardless of MID the scene. NIGHT : Fixed to NIGHT mode, regardless of the scene.
If is set to , the MASK AREA function is not available. M English EXT : The interface to an external alarm enables an automatic switch between DAY and NIGHT mode. If you use an infrared light source while in AUTO mode, this may cause a failure in AUTO SWITCH or AUTO FOCUS. WHITE BAL If you need to adjust the color according to the ambient illumination, you can use the function.
setup 1. Select - . 2. Select a mode where you set the . DAY : You can set the RED, and BLUE value in DAY mode. The screen will be displayed in colors DAY/NIGHT according to your settings. MODE You can set the R-GAIN, and B-GAIN value only in mode. NIGHT : You can set the according to the ambient illumination.
FOCUS MODE - AF : This will monitor the screen continuously to focus automatically. If you adjust the focus manually, that will operate the same as in . This will also restore focus after the operation of zoom. - SENSITIVITY : Indicates the sensitivity of auto focus, which you can adjust between level 1 and level 7. The closer your setting is to 7, the more sensitively the auto focus function performs. The Night setting is used when a strong light reflects in a low contrast scene.
setup DIGITAL ZOOM You can set the maximum allowable digital zoom ratio. Digital Zoom will start operation after it is zoomed in to the maximum optical ratio of x43. If you set DIGITAL ZOOM to x16, you can take a shot at up to x688 (43x16). When you set DISPLAY ZOOM as on, you may see zoom value on the screen. DETAIL Used to adjust the vertical and horizontal distinction, respectively. V-SYNC You can set the V-SYNC mode. - If you select , the camera will use the internal synchronization.
PIP M If more than one PRIVACY ZONE is specified, and PRIVACY SET to , the PIP English You can view a main image with a sub image on the same screen. function is not available. As long as SENSE UP is set to FIXED, PIP menu is not available. According to the luminance, PIP will disappear if the SENSE UP menu is set to AUTO.
setup ADVANCED You can detect motions and mark the video that contains such motion, and enables tracking of the movement. Selecting the option will mark a region if an existing object disappears, or a new object appears and fixed for a certain period of time. M MASK AREA In following situations, FIXED/MOVED detection may not work properly. - When multiple motions continue arbitrarily. - When the object that is fixed continues to move in the same position.
English PRIVACY ZONE You can set up to 12 privacy zones that will be hided for privacy of the subject when recording. Zone Setup 1. Select -. 2. Select the number of the zone and press [ENTER]. The Zone setup screen appears. 3. Select the and press [ENTER]. Using ▲▼_+ to locate zoom position. 1 7 PRIVACY ZONE 2 8 3 9 4 10 5 11 PRIVACY SET STYLE 6 12 ON MOSAIC1 4. Select the . Select the pixel level for the SIZE and LOCATION settings. 5.
setup PRESET This function provides preset camera settings such as zoom and focus so to enable quicker and easier accessing and monitoring, which supports up to 512 presets. 1. Select -. 2. Select the preset number. 3. Select . 4. Set to and enter the name. For entering the name, refer to “CAMERA ID”.
English OTHER SET You can reset the system by running FACTORY DEFAULTS, or set the font color etc. 1. Select -. 2. Select each item and set appropriately. Language Select and use the left/right button to select a preferred display language. OTHER SET LANGUAGE EXTERNAL TRG FACTORY DEFAULTS OSD COLOR CTRL TYPE ENGLISH OFF BW A EXTERNAL TRG Set the EXTERNAL TRG menu to ON and press the SETUP switch to display the appropriate screen.
setup OSD COLOR Selects the color of the on-screen display font. CTRL TYPE By inputting the wire remote port, you may set up the A, B, C or D mode. Code A Tele Wide Far Near -6V +6V +6V -6V +6V B -6V +6V -6V C +6V -6V +6V -6V D +6V -6V -6V +6V COMMUNICATION You can set the RS-485 communications setting in regard of the camera. 1. Select -. 2. Select each item and set appropriately.
appendix English Shortcut Keys You may control this camera by using Controller (SSC-5000). Function Key DAY/NIGHT - DAY [PRESET] + [5] + [1] + [2] + [ENTER] DAY/NIGHT - NIGHT [PRESET] + [5] + [1] + [3] + [ENTER] DAY/NIGHT - AUTO [PRESET] + [5] + [1] + [4] + [ENTER] DAY/NIGHT - EXT [PRESET] + [5] + [1] + [5] + [ENTER] IRIS – ALC – BACKLIGHT – WDR [PRESET] + [5] + [1] + [6] + [ENTER] CAMERA SET IRIS – ALC – BACKLIGHT – OFF [PRESET] + [5] + [1] + [7] + [ENTER] Function Z-2430P(D)-3430P(D)-ENG.
appendix Specifications Item Product Type Power Source Power Consumption TV Standard Image Sensor Description Power Zoom Camera SCZ-2430PD/2430ND/3430PD/3430ND: DC 12V SCZ-2430P/2430N/3430P/3430N: AC 24V (60Hz),DC 12V SCZ-2430PD/2430ND/3430PD/3430ND: 4.2W SCZ-2430P/2430N/3430P/3430N: 5.
Description WDR SCZ-3430PD/3430ND/3430P/3430N: x128 WDR is not available for SCZ-2430PD/2430ND/2430P/2430N. Signal Output COMPOSITE VIDEO OUT : 1.0 Vp-p 75 ohms/BNC Lens English Item x43 Zoom Lens Integrated Focal length : 3.2 ~ 138.5mm Aperture : F1.65(Wide) F3.
SALES NETWORK SAMSUNG TECHWIN CO., LTD. Samsungtechwin R&D Center, 701, Sampyeong-dong, Bundang-gu, Seongnam-si, Gyeonggi-do, Korea, 463-400 TEL : +82-70-7147-8740~60 FAX : +82-31-8018-3745 SAMSUNG TECHWIN AMERICA Inc. 1480 Charles Willard St, Carson, CA 90746, UNITED STATES Tol Free : +1-877-213-1222 FAX : +1-310-632-2195 www.samsungcctvusa.com www.samsungtechwin.com www.samsungsecurity.com Z-2430P(D)-3430P(D)-ENG.indd 36 SAMSUNG TECHWIN EUROPE LTD.