Service manual

Samsung Electronics 3-3
3-6 AC Power Cord
Plug one end of the cord into the back of the
machine and the other end into a standard,
grounded 3-prong AC power outlet.
The machine turns on. All lamps on the control
panel light up and the LCD displays ‘SYSTEM
INITIAL’ then ‘PAPER OUT’. Load the paper as
described on page 3-4.
If you want to turn it off, unplug the power cord.
Note : If documents are deleted from memory due
to a power failure, the machine automatically
prints out a Power failure report after power is
supplied.
1. Connect a bi-directional parallel printer cable to
the 36 pin printer jack on your machine.
It is recommended to use the parallel cable that
supports IEEE-1284 bi-directional communica-
tions.
2. Fasten the metal clips to the parallel cable.
3. Connect the other end of the parallel cable to
your computer.
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
3-7 Connecting Printer Cable
Printer cable