Service manual

4-14 Samsung Electronics
Disassembly
4-7-3 Home Ass’y
1. Before you disassemble the home ass’y, you
should remove:
– Printer Unit (see page 4-11)
2. Pushing the both ends of the home ass’y, take out
the ass’y in the direction of arrow.
4-7-5 Base Frame Ass’y
1. Before you disassemble the base frame ass’y, you
should remove:
– Printer Unit (see page 4-11)
– Carrier Ass’y
2. Remove the friction ass’y, then take out the
actuator feed.
3. Pull out the base frame ass’y.
Home ass’y
Roller friction ass’y
Actuator feed
Base frame ass’y