Service manual

Samsung Electronics 4-15
Disassembly
4-7-4 Carrier Ass’y
1. Before you disassemble the carrier ass’y, you
should remove:
– Printer Unit (see page 4-11)
2. Remove the cable holder. Remove the one screw
on the right side of the main frame, and remove
the spring. Then take out the carrier shaft.
4-7-6 Feed Roller Ass’y
1. Before you disassemble the feeder roller ass’y, you
should remove:
– Printer Unit (see page 4-11)
– Carrier Ass’y
– Base Frame Ass’y
2. Remove the bearing feed from the main frame.
Pull the feeder roller in the direction of arrow and
take it out.
Carrier shaft
Head cable
Cable holder
Feed roller
Bearing feed