Camcorder User Manual
Table Of Contents
- key features of your memory camcorder
- before reading this user manual
- Important information on use
- safety information
- contents
- quick start guide
- getting to know the camcorder
- preparation
- USING THE HAND STRAP
- ADJUSTING THE LCD SCREEN
- BASIC CAMCORDER POSITIONING
- CONNECTING A POWER SOURCE
- CHECKING THE BATTERY STATE
- BASIC OPERATION OF YOUR CAMCORDER
- SWITCHING TO THE POWER SAVING MODE
- LCD SCREEN INDICATORS
- TURNING THE SCREEN INDICATORS ON/OFF
- SHORTCUT MENU (OK GUIDE)
- INITIAL SETTING : TIME ZONE, DATE AND TIME & OSD LANGUAGE
- about the storage media
- recording
- playback
- recording options
- playback options
- settings options
- using with a Windows computer
- connecting to other devices
- maintenance & additional information
- troubleshooting
- specifications
- Contact SAMSUNG WORLD WIDE
94
connecting to other devices
You can view the recorded videos and photos on a large screen by connecting the camcorder to a TV.
CONNECTING TO A TV
To playback your recordings, the television must be PAL-compatible.
²
page 99
We recommend that you use the AC power adaptor as power source for the camcorder.
Use the provided Audio/Video cable to connect the camcorder to a TV as follows:
1. Connect the end of the Audio/Video cable with the single plug to the Audio/Video cable jack
of the camcorder.
2. Connect the other end with video (yellow) and left (white)/ right (red) audio cables to the TV.
•
•
VIDEO AUDIO
Monaural Type
Red
VIDEO AUDIO
L
R
White
Y
ellow
Stereo Type
Normal TV
Camcorder
Signal fl ow
AV
AV Cable
Red
Yellow
White
Make sure that the Audio/Video cable is connected to the TV and the camcorder. You cannot view
the image or hear the sound if the cable is not connected properly.
When you connect the Audio/Video cable, match the colour of the Audio/Video cable jack and the
TV terminals.
Don’t apply excessive force when inserting or extracting the cable into/from the Audio/Video cable.
Use the AC power adaptor when connecting the cable to the TV.
When the Audio/Video cable is connected to the camcorder, you should control the volume on the
TV.
The screen ratio of the TV and the camcorder may differ depending on the connected TV.
•
•
•
•
•
•