Camcorder User Manual
Table Of Contents
- key features of your memory camcorder
- before reading this user manual
- Important information on use
- safety information
- contents
- quick start guide
- getting to know the camcorder
- preparation
- USING THE HAND STRAP
- ADJUSTING THE LCD SCREEN
- BASIC CAMCORDER POSITIONING
- CONNECTING A POWER SOURCE
- CHECKING THE BATTERY STATE
- BASIC OPERATION OF YOUR CAMCORDER
- SWITCHING TO THE POWER SAVING MODE
- LCD SCREEN INDICATORS
- TURNING THE SCREEN INDICATORS ON/OFF
- SHORTCUT MENU (OK GUIDE)
- INITIAL SETTING : TIME ZONE, DATE AND TIME & OSD LANGUAGE
- about the storage media
- recording
- playback
- recording options
- playback options
- settings options
- using with a Windows computer
- connecting to other devices
- maintenance & additional information
- troubleshooting
- specifications
- Contact SAMSUNG WORLD WIDE
100
TROUBLESHOOTING
+
Before contacting a Samsung authorised service centre, perform the following simple
checks. They may save you the time and expense of an unnecessary call.
troubleshooting
Power source
Message Icon Informs that... Action
Low Battery -
The battery pack is almost
discharged.
Change to a charged one or use the AC
power adaptor. Charge the battery pack.
•
Check the
authenticity of this
battery
-
The battery pack can not
pass authenticity check.
Check whether the battery is
authentic and change to new one.
It is recommended that only genuine Samsung
batteries are used in this camcorder.
•
•
Storage media
Message Icon Informs that... Action
Memory Full
(SMX-C24 only)
There is not enough
space to record on built-in
memory.
Delete unnecessary files on the built-in
memory. Use a memory card.
Back-up files to your PC or another storage
media and delete files.
•
•
Insert Card
There is no memory card
inserted in the card slot.
Insert a memory card.•
Card Full
There is not enough space
to record on memory
card.
Delete unnecessary files on the memory
card. Use the built-in memory.
(SMX-C24 only)
Back-up files to your PC or another storage
media and delete files.
Change to another memory card which has
enough free space.
•
•
•
Card Locked
The write protection tab
on an SDHC card has
been set to lock.
Release write protection tab.•
Card Error
The memory card has
some problem and cannot
be recognised.
Format the memory card or replace it with a
new one.
•
Warning indicators and messages